Lars, I am a beginner to 360, I was searching you tube for tutorials on how to use it ( my work provides tutorials , but they were VERY boring) after looking at a few sites, I stumbled upon you, and boy I am glad I did! You keep it lite and interesting, I decided that I wasn't going to buy a 3D Printer until I was able to use the software, well after about a week of watching you after everyone went to bed I acquired enough conference to buy the printer! I just wanted to say thank you, and looking forward to more of your video!.
Lars I absolutely love your videos, thank you for all your hard work, I have a TH-cam channel and a facebook group about building and maintaining 3d printers, I always recommend you to the group members. I am learning tons. Thank you.
Thanks again Lars. Any chance since you are closing in on 100 that there might be an excel or word file with links and remarks to every live stream you have done. I know you have done things I would find interesting but I don’t know where to find them. Thanks Bob
Thank you Bob Sturdevant I need an intern :-) ....Can I be honest? I really don't want to manage such a list. Figure out where it should be stored, categorized and updated. Personally, I go to the playlist on TH-cam and do a Ctrl+F for search. With that said, a friend did create a pdf with links and descriptions through episode 67. I will be happy to share that if you want. email: lars.christensen@autodesk.com I'll love to hear any suggestions on how this could be done without manual labor :-) Have an awesome day! BEst, Lars
Lars Christensen thanks for the reply. Just returned from Jakarta and catching up on emails and comments. I understand about not having time. I will send an email to you requesting the pdf your friend made. Let me do some research and what would be the most painless way to do something like this. I think the hardest part is the storage of the file so you could start adding a link in the comments. Once we have that then adding in a single line like Episode #100, Subject, Link That info would be updated and then added to your comment section on episode #101. Which you then make mention of during you broadcast. You could do this easily between changing diapers, rocking the baby and getting cat naps of sleep since you won’t be getting proper sleep for awhile. Thank you again for sharing your knowledge. Cheers. Bob
Whenever I import a file into the side bar it will show up, but when I double click it, it just opens up an internet explorer link on the Autodesk page and the file doesn't go into my project. I've tried with all types of files but I can't figure out how to get it in. I am following the exact steps every time and have looked at a bunch of videos but it won't work. Help would be much appreciated, thanks!
Hi Alex Groff Thank you for watching! Someone else just had this issue. They ended up re-installing Fusion, I believe. Maybe reach out to support: forums.autodesk.com/t5/fusion-360-support/bd-p/962 Good luck. Best, Lars
have fusion 360 ( love using it) have Revit 014. Its good for general architecture but don't love using it for making detailed items. I want to draw a metal framework for a bldg. and then use revit to add layers to the bldg. and items like plumbing electrical etc etc . Have a vid showing how to export from Fusion to revit?
So, I'm a bit confused? A friend has asked me to continue a project that he has started. He sent me a link with a password. I can open that link and see the project. I do not understand how to get this data into my Fusion 360 work surface to continue drawing/building and adding more components? Not sure what format to download/upload so I can edit and continue to work on this project?
Hi Pete Panaia Thank you for watching! There are a couple of ways you can get into the project. One would be that he invites you to the project so you both can work on it. The other way, what is the way from your explanation is that he send you a public link. You can click the arrow in the upper right corner and download as a Fusion archive. Then you can upload the file into your project. Hope this makes sense and is helpful. BEst, Lars
Hi Steven Raabe Thank you for watching! I am not sure. It is at its core a mechanical CAD software, but I am sure the developers are looking to do what makes the most sense. I am pretty low on the food chain so I don't really influence the software in any way.
One idea could be to try to send something simple out of solution ware, like a square with a hole and see if that will be brought in. Now you know if it is the specific file or if is a software issue. dxf is pretty neutral though, I would think it is file specific
Lars, I want to 3D print a part by using Fusion 360 to design it from a drawing. Is it possible to import a .pdf of a drawing into Fusion 360 so that I can create a Model? Or, how can I import a drawing?
You probably figured it out by now, but for the other users: Under insert there is a field called canvas, i think. If a pdf doesn#t work, take a screenshot of it.
Hi Mohd Abid Saifi Thank you for watching! There are no way to my knowledge where you can import an NX into Fusion without using the cloud converters. Best, Lars
Hey Lars! I want to import some obj files. I look at your video, and I can't find the upload & the new folder button. I guess I've clic on something by mistake. Then I made my reasearch and and find this link: help.autodesk.com/view/fusion360/ENU/?guid=GUID-F8CFD835-9035-41F6-A428-F9D13900FD96 But again when I clic on the Insert, the popup list show up. But without the obj they talking about. Could you help a poor fellow...? Thks in advance.
Lars, I am a beginner to 360, I was searching you tube for tutorials on how to use it ( my work provides tutorials , but they were VERY boring) after looking at a few sites, I stumbled upon you, and boy I am glad I did! You keep it lite and interesting, I decided that I wasn't going to buy a 3D Printer until I was able to use the software, well after about a week of watching you after everyone went to bed I acquired enough conference to buy the printer! I just wanted to say thank you, and looking forward to more of your video!.
That is awesome to hear John Fehn .Thank you for watching the videos AND congratulations on the new printer!!! :-)
Lars I absolutely love your videos, thank you for all your hard work, I have a TH-cam channel and a facebook group about building and maintaining 3d printers, I always recommend you to the group members.
I am learning tons.
Thank you.
That is awesome to hear Yourdy Alcaide .Thank you for watching the videos! Glad this is useful.
Have a great day!
Once again thanks for these extra tips on export inmport files . . . and .. . have a lovely week end too in case we should miss each other tomorrow
You are so very welcome :-) Thank you for watching!
Great demonstration! Thanks very much Lars!
That is awesome to hear Sami Seghir .Thank you for watching the videos
Thanks Lars yet another great video.
Thank you richiemag22
Thanks again, Lars!
You are so very welcome :-) Thank you for watching!
Hi, Excellent fusion360 channel, I have a question, I want to export the arrange to Autocad in dwg or dxf, how can I do it?
Thanks again Lars. Any chance since you are closing in on 100 that there might be an excel or word file with links and remarks to every live stream you have done. I know you have done things I would find interesting but I don’t know where to find them. Thanks Bob
Thank you Bob Sturdevant I need an intern :-) ....Can I be honest? I really don't want to manage such a list. Figure out where it should be stored, categorized and updated.
Personally, I go to the playlist on TH-cam and do a Ctrl+F for search.
With that said, a friend did create a pdf with links and descriptions through episode 67. I will be happy to share that if you want. email: lars.christensen@autodesk.com
I'll love to hear any suggestions on how this could be done without manual labor :-)
Have an awesome day!
BEst,
Lars
Lars Christensen thanks for the reply. Just returned from Jakarta and catching up on emails and comments. I understand about not having time. I will send an email to you requesting the pdf your friend made. Let me do some research and what would be the most painless way to do something like this. I think the hardest part is the storage of the file so you could start adding a link in the comments. Once we have that then adding in a single line like
Episode #100, Subject, Link
That info would be updated and then added to your comment section on episode #101. Which you then make mention of during you broadcast. You could do this easily between changing diapers, rocking the baby and getting cat naps of sleep since you won’t be getting proper sleep for awhile.
Thank you again for sharing your knowledge. Cheers.
Bob
is there an component (also sketches and so on) adaptivity exist in fusion 360? for example, like in Inventor?
Hi Igor Gorbachev Thank you for watching!
I am not totally sure what you mean by adaptivity?
Hey Can you let me know if I can export the design in MATLAB Simulink?
Whenever I import a file into the side bar it will show up, but when I double click it, it just opens up an internet explorer link on the Autodesk page and the file doesn't go into my project. I've tried with all types of files but I can't figure out how to get it in. I am following the exact steps every time and have looked at a bunch of videos but it won't work. Help would be much appreciated, thanks!
Hi Alex Groff Thank you for watching!
Someone else just had this issue. They ended up re-installing Fusion, I believe.
Maybe reach out to support:
forums.autodesk.com/t5/fusion-360-support/bd-p/962
Good luck.
Best,
Lars
have fusion 360 ( love using it) have Revit 014. Its good for general architecture but don't love using it for making detailed items. I want to draw a metal framework for a bldg. and then use revit to add layers to the bldg. and items like plumbing electrical etc etc . Have a vid showing how to export from Fusion to revit?
I have not done the Fusion to Revit workflow... Video topic idea, thank you
Hello sir call u make a video on how to export a 3d model with materiel from fusion 360 to cinema 4d
Hello. I’ve sent the link to my emails (various). None of them arrived. Any suggestion? Thanks
So, I'm a bit confused? A friend has asked me to continue a project that he has started. He sent me a link with a password. I can open that link and see the project. I do not understand how to get this data into my Fusion 360 work surface to continue drawing/building and adding more components? Not sure what format to download/upload so I can edit and continue to work on this project?
Hi Pete Panaia Thank you for watching!
There are a couple of ways you can get into the project. One would be that he invites you to the project so you both can work on it. The other way, what is the way from your explanation is that he send you a public link. You can click the arrow in the upper right corner and download as a Fusion archive. Then you can upload the file into your project.
Hope this makes sense and is helpful.
BEst,
Lars
So "Fusion archive" is what I want. Thanks for the reply Lars!
Which file type that when you download preserves the renders you've done in Fusion?
Hi Marvin Gorospe Thank you for watching!
I would think the Fusion archive might, but I would have to check it out
When will Fusion enable Revit Family creation and editing?
Hi Steven Raabe Thank you for watching!
I am not sure. It is at its core a mechanical CAD software, but I am sure the developers are looking to do what makes the most sense.
I am pretty low on the food chain so I don't really influence the software in any way.
Having trouble loading a DXF file generated by Solution Ware (geopath) 2010, it says Failed to insert this DXF file, thats it HELP
One idea could be to try to send something simple out of solution ware, like a square with a hole and see if that will be brought in. Now you know if it is the specific file or if is a software issue.
dxf is pretty neutral though, I would think it is file specific
Lars I do not see the upload button in my data panel... Is that a feature for paid users? What am I doing wrong?
Hi Wm Robert Leschyna Thank you for watching!
Are you online? I am not sure why it would not be there.
how do I export into Urdf ?
Lars, I want to 3D print a part by using Fusion 360 to design it from a drawing. Is it possible to import a .pdf of a drawing into Fusion 360 so that I can create a Model? Or, how can I import a drawing?
You probably figured it out by now, but for the other users: Under insert there is a field called canvas, i think. If a pdf doesn#t work, take a screenshot of it.
dear sir please help me
how can I import nx files into fusion 360 without online
Hi Mohd Abid Saifi Thank you for watching!
There are no way to my knowledge where you can import an NX into Fusion without using the cloud converters.
Best,
Lars
How do I export a autocad file to fusion 360
Check this out. Hope it’s useful help.autodesk.com/view/fusion360/ENU/?caas=caas/sfdcarticles/sfdcarticles/Converting-Fusion-360-to-DWG-or-DXF.html
Hey Lars!
I want to import some obj files. I look at your video, and I can't find the upload & the new folder button. I guess I've clic on something by mistake.
Then I made my reasearch and and find this link:
help.autodesk.com/view/fusion360/ENU/?guid=GUID-F8CFD835-9035-41F6-A428-F9D13900FD96
But again when I clic on the Insert, the popup list show up. But without the obj they talking about. Could you help a poor fellow...?
Thks in advance.
Finally find it... I was searching for "obj", not "mesh".
Well... It seems that I miss a chance to shut up!
Glad you figured it out! Have an awesome day!!