DIY Multiple 18650 Li-ion Battery Charger
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- #ErCanEverything #DIY #LiIonCharger
⚠️PARKSIDE Battery Powered 8A DC-DC Adjustable CC CV Step Down Converter 7-36V to 1.5-35V Power Supply
👉 • PARKSIDE Battery Power...
📌TP4056 Type-C 5V 1A 18650 Lithium Battery Charger Module
👉a.aliexpress.c...
📌18650 Battery contacts pack 16MM*18.5MM positive and negative
👉a.aliexpress.c...
📌Atorch USB tester 13 in 1 DC Digital Voltmeter Ampermeter Wattmeter
👉s.click.aliexp...
👇Subscribe to my Channel👇
/ ercaneverything
TikTok👉 / ercaneverything
Facebook👉 ercaneve...
Instagram👉 / ercaneverything
Twitter👉 / ercaneverything
PLEASE PLEASE PLEASE, UPLOAD YOUR VIDEOS WITHOUT BACKGROUND MUSIC. IT LOOKS VERY SATISFYING WITHOUT CONSTANTLY PLAYING MUSIC. WHEN U UPLOAD VIDEOS WITHOUT MUSIC, YOU MAKE IT GOLDMINE OF VIEWS.
I stop watching when the music kicks in even when I'm really interested in the content.
There is this thing called the volume control, if you don’t like the music just switch it off instead of asking op to ruin it for everyone else
@@1988dgs exactly 👍
Some like soft music some don't. Music volume is set to 20% And video volume is 200%
Please just turn your sound down!
Do you have the STL for the holder?
Очень аккуратно и красиво сделано👏👍,хочу тоже такому научиться 😔🤩
Hey dostum el işin çook güzel❤
3d print dosyasını ata bilirmisin
Please can you paste the link to download the 3D file?
Clean device. If this had an usb out module to use like a power bank in a pinch this would be ultimate.
Nice, can you share STL file ?
You can download from here👉 www.thingiverse.com/thing:3841876
sorry but very little practical use. it will take forever (4x) with a regular 2amp charger to charge. 18650 are not ment to be fast charged
For it to work you need to use 4x charger (amps) and a bus bar to have a steady current.
Dealing with the same issues with my solar set up in my off grid caravan. Ended up using a 4usb splitter with 8 amps and 4 cables.
For me it was problem solved. Ty
You are right and that is why I did for 4 batteries. otherwise, if I make it bigger, for example 10x, I will use a laptop charger with a regulator
where is the stl file from? Do you have a download link for us :)
www.thingiverse.com/thing:3841876
Great projects! What kind of glue and spray do you use? Well thank you.
Please add Gerber file link too I have to make this pleas
You can download from here👉 www.thingiverse.com/thing:3841876
@@ErCanEverything thankyou
Great job, amazing project 👍🏿🍀☺️
Thank you my Friend🙂🤝🤝🤝
WOW, this is so compact and useful 😍
Great skills! ✌️ Keep sharing awesome ideas with us Brother!
Indeed it is and Thank you for the idea Brother🙂🤝🤝🤝
Ercan öncelikle harika paylaşımların için çok teşekkür ederim. Bu şarj modülünün satışını yapıyor musun? Veya 3D için çizimini alabilir miyiz? Teşekkür ederim. Ellerine sağlık...
Next video: DIY Tesla car
😄😄😄
Can you share the 3D Files
Great job, but your links leave out the foundation of the project, the holder.
If it is from a CAD system and 3D printed, can you also provide the files ?
A lot of us do not have CAD software or a 3D printer, we do those who could print the holder for us.
Lat thing, could lower the background music volume some, it gets distracting.
You can download from here👉 www.thingiverse.com/thing:3841876
@@ErCanEverything Thanks
interesting, I will try to make one myself.
Great idea. I was thinking to make such thing from wood, but your looks amazing 😍
Very useful but the idea was from @DjaniAgain
I needed one, but for the future I will make a bigger one with an external charger
Thank you my Friend🙂🤝
Can you share the 3d file you used for the battery holder?
Her zaman ihtiyaç duyulan kullanışlı bir şarj cihazı. 👍👍
Beğenmene sevindim Dostum🙂🤝
If that 3D printer? May i have the link for 3D printer please
Hi, anybody please tell me. What is the difference between 4 batteries using 1 charging board and 4 batteries using 4 charging boards? Is there an advantage?
You cannot connect a fully discharged battery with a fully charged one! And that's why I use 4 modules with 1 charger, each module is responsible for its own battery and their charging current is limited to 1A.
@@ErCanEverything how many hours i must keep the batteries in charger?
Можешь дать ссылку на 3д модель холдера?
You can download from here👇
www.thingiverse.com/thing:3841876
請問，為什麼要另外放3個板？只使用1個板不行嗎？
Where can I get the 18650 3D printer firmware?
Please provide information.
Could you please share stl file?
Do you have the stl file to share for the 3d printing?
Excellent job 👍
Thank you my Friend🙂🤝
Can you have the module of the 3D printer
im a new suscriber, well done, 3d printer very usefull, how much do you spen for it?, thanks in advance, greetins from mexico
Thank you for subscribing to my channel.🙏🙂🤝
So 1kg of filament costs around $20 this weighs around 50-60g and will cost around $1 to make.
Would you share the 3d model of the battery holder?
Need STL file please send link
www.thingiverse.com/thing:3841876
You were getting an overall current of ~2.5A when each of those should be 1A x 4 = 4A...was that beefy power supply not quite up to it? or the cable?
A great way of putting together a small charging station for cheap!
Where can I get that stl file of charger
You can download from here👉 www.thingiverse.com/thing:3841876
But, needs Fail Safe BMS.
Can you post stl file please ?😊
nonscence! if u used only one module its also can charge all battries with 1ampare if you want to charge with 2A used tp 5100.
The chipset which the charger is connected to getting very hot, its temperature reached over 45 C then i turned it off before it burns
Just buy or already made .
By using a trigger board let say 9-12-15-20V will charge at high speed?
i have a lot of 20 tp4056 charge module, i like to do something like your idea to charge and recicle 18650 laptop battery, thanks for sharing very usefull ideas
I'm glad you liked it
Please give me the link to buy battery pack with the module slot same that you used. Thank you .
stl file pls
Where can I buy the container for put battery,let me know pls
I printed this on a 3D printer🙂
@@ErCanEverything ohhh,I need to this….
Thanks for the answer
What if my module isn't working. Diode do not change and battery isn't charging too. I conected everthing same as you, still doesnt work.
Is that red wire connected in series or parallel ???
All modules are connected in parallel, otherwise they will not work.
Congratulations, perfect job. Could you please provide me with the support file. I'll be thankful. greetings and continuation of beautiful projects. thanks
3d model link please
Sir can you give me 3Dmodule
www.thingiverse.com/thing:3841876
Thanks bro
Will it work if I connect two or more chargers in another port?
It should work but I haven't tried it🤔
IT OK IF BY CHANCE ALSO HAVE A 3D PRINTERS MASHINE LAYING TOO
GOOD TO SEE USB-C USED 4 A CHANGE excellent
Really cool! Not far off from being able to get it tested to 62368
3d design please
Why it is working in parallel mode? Wtf. Which power sources do you use?
Where is the 3D print file?
I was looking for the exact battery holder but I realised it was 3d printed 😅
can you make it series output?
I think it can't because their inputs are connected in parallel and that will prevent the outputs from being connected in series.
@@ErCanEverything ya, um trying to make it, I damaged 4 Boards... LOL... I think it can be create with bridge rectifier... what you think? I didn't tried yet.
Super!
Why not just one module?
where can i buy the battery holder,Can you provide a link to buy a battery holder?
Merhaba, modülleri paralel bağladığımız zaman tek güç kaynağı ile değilde 4 ayrı güç kaynağını 4 ayrı pile tek tek taksaydık fark olacak mıydı ? 4 pilde tek güç kaynağı ile 4 ayrı güç kaynağı eşit güçte mi akım çekecekti ?
Merhaba hocam aynı devreyi yaptım hatta 32 li yaptım paralel bağlamadan ayrı güç kaynağı da kullanabilirsiniz ama paralel bağladığınız zaman güçlü bir güç kaynağına ihtiyaç duyarsınız. Ben 32 li sistem için 5v 60 amper güç kaynağı kullandım.
cho mình xin thông tin của cái khay giữ pin và mạch
👍
great. i made one few months ago.
Thank you🙂
Nice vid man
Thank you🙂🤝
what if you put the battery in reverse polarity?
Next video please put the materials in comment section
Can i buy from you ? Pls give me link !!!
Danke , aber heisst das es bekommt den Strom von 5V/2A Handyloader? Währe ja auch das was da ab zu lesen. DANKE
+
Спасибо за видео, а есть проект для печати на 3D принтере корпуса?
Nice
Please reply
Mate is there anything you can't do, you are amazing 👏👏👏
Thank you my Friend🙂
I needed one, but for the future I will make a bigger one with an external charger🤔
Then what about scientist
Wo bekommt man die Datei für den 3d druck
You can download from here👉 www.thingiverse.com/thing:3841876
I have not much knowledge but you soldered P+ and B+ together?
on this modul p+ and b+ = 1 place but not p- and b-
What about reverse polarity protection for circuit
Це дуже класна ідея 👍👍👍
I'm glad you liked it🙂🤝🤝🤝
可以跟你購買嗎？謝謝你。
Можно ссылку на STL?
You can download from here👉 www.thingiverse.com/thing:3841876
Why 4 modules?
So that they charge faster and the batteries are independent of each other. Each module is limited to 1A and with 1 module it would charge much slower
@@ErCanEverything dumb me i forgor that 😅
можно файлик stl для печати?
did you made those battery holder?
i made this few days ago
but i dont have 3d printer so i sticked it on piece of wood
Well done🙌
This is very nice, people need to know their abilities.
And I made this with my hands before I had a 3D printer🙂
th-cam.com/video/z3Bfyq8amEE/w-d-xo.html
@@ErCanEverything great :)
@@ErCanEverything also i made this with four 18650 battery connectors, and next to that are some other connectors for different batteries
Plz name batay jo jo chezen ap ne use ki hen
I don't understand what you're writing🤷
how many hours does the battery needs to be fully charged by tp4056?
around 3
Box battery buy link?
Ali express se saman to india me ship nahi ho raha hai to aap ne kese mangvaya , please reply
I can't translate what you write🤷
@@ErCanEverything Same from AliExpress which is not shipping in India so how did you order please reply
@@ErCanEverything Please reply
Search for other options by typing TP4056
Is it possible to use just one 4056 for two batteries connected (parallel) ?
Same question, did you find out?
@@frostyflankz120 It does work. However it heats up a lot. I feel its unsafe long term. I put a small heat sink under the chip to help keep it cool.
Твой ролик достойный внимания
Thank you very much🙂🤝
STL ?
You can download from here👉 www.thingiverse.com/thing:3841876
@@ErCanEverything thank you
Super
Thank you🙂
2:33 What this glue?
Glue with activator for fast dry
www.google.com/url?sa=t&source=web&rct=j&url=www.emag.bg/momentno-lepilo-za-mdf-mitre-apel-100gr-400ml-dvukomponentno-19693/pd/DWYB7LBBM/&ved=2ahUKEwiOysaXna37AhWn7rsIHSPYDPoQjjh6BAgYEAE&usg=AOvVaw3dLiblFszWLsx0YdWseVOQ
@@ErCanEverything It is not possible to order from this site to my country. Dear author, can I ask you for an analogue from the aliexpress website please? drop the link please
@@user-vc1pj8el4j Try this site: www.bangood.com
there is no link to this battery holder. From where to get it???
maybe 3d print?
@@user-MyMasteryou have a link to the model?
🇺🇦👀👏👏👏❤👍🏆
I wanted to subscribe but...
I'm already subcribed! Good ideas!
Its good to put link to STL file with every build. :)
You can download from here👇
www.thingiverse.com/thing:3841876
For me file 3D printer, pls 😢
O . give me your address
Türk müsün?
Evet Türküm Dostum🙂
@@ErCanEverything yeni keşfettim seni yolun açık olsun takipteyim :)
Desteğin için teşekkür ederim Dostum, Allah razı olsun🙏🙂❤️🤝
2:20 What you are using for CA-glue accelerator...
Time
A generous amount😂
@@akashdeeplakra3583 🤔🤔
Браво братле правиш много яки неща 👏👏 ellerine sağlık kardeşim nazar deymesin 👏🧿
Teşekkür ederim Dostum🙂🤝🤝🤝
А готовую зарядку купить нельзя?