Good afternoon. Error C6950 popped up in Kyocera TASKalfa 4551ci KX, nothing can be done, control is impossible, the picture shows a disconnection from the network, it does not help. Have you encountered a similar problem?
السلام عليكم سيدي ممكن تساعديني في حل مشكلة مكنه تصوير كيوسيرا 4501 العداد عالي جدا ممكن فيديو امسح العداد كلوا اخلي التوتل كلو اصفار واشكر حضرتك ارجو الرد والمساعد
Do you have better ideas how to repair the fuse unit for Kyocera 4002i .code 6600 and code 6670 ,(just like you say #2 THE BELT ROTATION)THANK YOU for responds
This is caused by toner that has smaller particles than normal, causing the toner particles to clump on the sensor... use a good quality toner and you won't have this problem anymore.
Defective connector cable or poor contact in the connector. - Reinsert the connector. Also check for continuity within the connector cable. If none,replace the cable. Fuser heater PWB (YC29) and feed PWB 1 (YC27) Defective fuser heater PWB. - Replace the fuser heater PWB and check for correct operation. courtesy: kyocera service manual
Good afternoon.
Error C6950 popped up in Kyocera TASKalfa 4551ci KX, nothing can be done, control is impossible, the picture shows a disconnection from the network, it does not help.
Have you encountered a similar problem?
السلام عليكم سيدي ممكن تساعديني في حل مشكلة مكنه تصوير كيوسيرا 4501 العداد عالي جدا ممكن فيديو امسح العداد كلوا اخلي التوتل كلو اصفار واشكر حضرتك ارجو الرد والمساعد
@Max1u, Thank you for correcting my previous uploaded video of C6610 error.
Very Good Video :) I also remove the diodes from the housing and clean them :D What liquids do you use to clean the sensor?
@@max1uYT use co contact cleaner
Do you have better ideas how to repair the fuse unit for Kyocera 4002i .code 6600 and code 6670 ,(just like you say #2 THE BELT ROTATION)THANK YOU for responds
www.copytechnet.com/forums/kyocera-mita-copystar/157554-5002i-c6600.html...check...
Great dear 👌
Thanks...
This is caused by toner that has smaller particles than normal, causing the toner particles to clump on the sensor... use a good quality toner and you won't have this problem anymore.
Olha a quantidade de sujeira de toner....
Thanks.
Kyocera 3500i 4201 paper jam
Clean paper sensors. Check pickup roller/ feed roller.
Error C6400
4501i
Defective connector cable or poor contact in the connector.
- Reinsert the connector. Also check for continuity within the connector cable. If none,replace the cable.
Fuser heater PWB (YC29) and feed PWB 1
(YC27)
Defective fuser heater PWB.
- Replace the fuser heater PWB and check for
correct operation. courtesy: kyocera service manual