So, as I see on the video, the all that needs to be done - just clean everything. Thanks! Its working! Короче, пацаны, нужно всё тупо протереть, продуть и пропылесосить и собрать нахрен обратно.
Error C6950 popped up in Kyocera TASKalfa 4551ci KX, nothing can be done, control is impossible, the picture shows a disconnection from the network, it does not help. Have you encountered a similar problem?
Toner hopper motor error When the toner hopper motor is driven, toner hopper sensor does not turn on within 200ms. This error is detected 15 times successively. 1. Defective connector cable or poor contact in the connector. - Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. - Toner hopper motor and front PWB (YC5) Front PWB (YC3) and engine PWB (YC7) 2. Defective drive transmission system of motor. - Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any. 3. Defective tonerhopper sensor. - Replace the toner hopper sensor. 4. Defective toner hopper motor. - Replace the toner hopper motor. 5. Defective engine PWB. Replace the engine PWB and check for correct operation
I have not encounter that error but you can check from this forum...www.copytechnet.com/forums/kyocera-mita-copystar/63407-taskalfa-500ci-error-f040.html
You are brilliant thank you for effort❤
Welcome...
So, as I see on the video, the all that needs to be done - just clean everything.
Thanks! Its working!
Короче, пацаны, нужно всё тупо протереть, продуть и пропылесосить и собрать нахрен обратно.
Welcome...
Error C6950 popped up in Kyocera TASKalfa 4551ci KX, nothing can be done, control is impossible, the picture shows a disconnection from the network, it does not help.
Have you encountered a similar problem?
Soory my friend I did encounter that problem but check the solution from www.copytechnet.com/forums/kyocera-mita-copystar/118993-c-6950-4551ci.html
@@macor285 Thank you.
Please send me the procedure or ya code for conversion of 3500i to 4500i. Please also tell the procedure of speed up functioning of 5500i
You can download the service manual. If you cannot find I will send it to your email.
very good
Thanks...
slow copying/pause after copying 5 sheets for 30 seconds and starts again kyocera taskalfa 6002i problem,helm me to fix it
If there still a slot for memory/ram add memory. For printing install latest driver compare postscript or pcl6 drivers.
Niceeee
nice
Thanks...
Error 7301
Kyocera 4555i
How to fix it ?
Toner hopper motor error
When the toner hopper motor is driven, toner hopper sensor
does not turn on within 200ms. This error is detected 15 times successively.
1. Defective connector cable or poor contact in the connector.
- Reinsert the connector. Also check for continuity
within the connector cable. If none, replace the cable.
- Toner hopper motor and front PWB (YC5)
Front PWB (YC3) and engine PWB (YC7)
2. Defective drive transmission system of motor.
- Check if the gears rotate smoothly. If not,
grease the bushes and gears. Check for
broken gears and replace if any.
3. Defective tonerhopper sensor.
- Replace the toner hopper sensor.
4. Defective toner hopper motor.
- Replace the toner hopper motor.
5. Defective engine PWB.
Replace the engine PWB and check for correct operation
my greetings and respect to you. I have this code and I am working on fixing it, but I don't know how
i tried to clean RAMS and hard drive
sir how to remove code F040 taskalfa 5500i
I have not encounter that error but you can check from this forum...www.copytechnet.com/forums/kyocera-mita-copystar/63407-taskalfa-500ci-error-f040.html
𝐸𝑟𝑜𝑟 4501
What machine? What is the error code?
@@macor285 𝑠𝑖𝑟 𝑚𝑎𝑐ℎ𝑖𝑛𝑒 𝑛𝑎𝑚𝑒 𝑡𝑎𝑠𝑘𝑎𝑙𝑓𝑎 3500𝑖 𝑎𝑛𝑑 𝑒𝑟𝑟𝑜𝑟 𝑛𝑎𝑚𝑒 𝐶4501
Adeeb
c9950 code salove