Hahaha yes that's true.. This product is for me one of the useless stuff 2019. I have a small skateboard dolly and I never find good conditions to use it.. But this skate dolly was 15 USD
I was gonna say that $700 for the set is too much. Turns out it's just for the base? I liked the concept but I don't believe it delivers enough to justify the price. I'd pay $200 tops just for the dolly base with those results.
@@98JamesNixon Not all filmmakers are cheap you know, this industry is far from the budget perspective TH-cam loves to promote. This is an extremely useful tool for those that do commercial product work.
@@AyechinoProd Agreed. That's why Pros will invest in something better. Not a single test they did in this video looked good. This is not what "Pros" need and want to use. Too flawed and limiting in usability for the pros and too expensive for the amateurs.
@@AyechinoProd I could and would agree with you.... but: The fact is, that edelkrone sponsored the video. Sponsors are very specific with how they want their products represented - so they "very likely" told them to "show these 3 scenarios" and they "very likely" saw + approved the results (cause the product just can't do much better :D ) .
Edelkrone is one of the most innovative companies out there for filmmakers. I have yet to see a bad product from them, they're very consistent with their quality!
You mentioned in your video that you couldn’t use a slider to get the effect because the slider would get in the way. Have you checked out the Edelkrone slider V2? I believe that the way it works on a tripod would allow you to get that forward moving shot. On a tripod when the slider moves forward/sideways, the slider retracts on itself. Just a thought...
Great video! Very interesting product. May I suggest (at least for smaller distances needed to be covered), going to a flooring business and asking for a small reminant of vinyl linoleum flooring. I think a 3 to 4 foot area of such material could be rolled up and easily taken on a shoot.
Does it detect the edge of a surface? How good is it's repeatability? What is a type of shot that you could get with the dolly and the pan head? These questions i would like to know.
Hi Justin, DollyONE doesn't have an edge detection since it won't fall off unless you intentionally drive the system off the table. It only moves as much as the users want it to move and immediately stops if there's a disconnection between the phone/app and DollyONE. As for repeatability, slight variances in position changes occur. With this bundle, you may set up a huge linear slide that is not possible with a regular slider and add a head movement. Our best, Asude
how much better is the 150 flex tilt head than its $20-30 counter parts? even if the off brands need tightened each time its moved, that would be worth the savings if you arent in a rush. if the off brands CAN be tightened that is
Can the motion control repeat its movement over and over? would like to know if it's a viable option for FX shots. Can I do a number of accurate repeated movement passes with the head, not the dolly?
You didnt tell, when using in interview mode, if you can make it go back-forward in a infinite loop... and what the comparison between their mini dolly. Thx !
The whole point of this dolly is so you’re not bound by a slider. If you’re going to limit yourself with a track that needs to be mounted between 2 tripods, then wouldn’t you be better off just getting a slider?
@@MrPhilbautista The track would be to negate the adverse effects of uneven/adverse terrain so you can still get ueber smooth dolly shots. That was the biggest criticism of the dolly in the vid (that sub-optimal terrain makes it difficult to get useable shots). Better off getting a slider? If the budget is real tight most likely. But if you want the hands-off remote control aspect of this dolly then not so much.
@@sprocketblvd6758 There are sliders that are remote controlled. Edelkrone has one too, and it ain't for tight budgets. And it can be mounted on one tripod. Just like many other remote controlled sliders. Many of which are cheaper than this dolly. Seriously, if you're looking to be lugging a track around with it, along with two tripods to support that track, that's your business and I won't try to convince you otherwise. Personally, this thing has too many shortcomings for where it's priced. If I'm mobile, I'd rather bring a gimbal and if I'm in a studio, I'd rather use a slider.
Hey Griffin, Would it be possible to bring some kind of smooth, rollable surface with you to help even out street bumps? Or would the underlying bumps still make the footage too jittery? Thanks!
Nice to see a review of this device Griffin. Personally, I think its rather expensive. But I`d love for you to review follow focus systems for the GH5/GH5s.
can you show us a setup using the pan tilt and slider 1 v2 at the same time then add the turn table ( i know you need a second device to control the turn table
I like their products and I want them all but 🤑🤑🤑🤑🤑🤑 I think this equipment was designed and intended for indoor studio work. It needs nice smooth and level surfaces. I plan to order the HeadOne and Flex Tilt Head. After a month or two I'll get another HeadOne and the Tilt Kit but now that I see you and DollyOne I might get that 2nd instead of 3rd. 👋🏿😇😇😇😇😇😇😇😇😇👍🏿
Hi. I'm wondering if you still have this around to test and, if so, have you tried running it over the smooth side of a yoga mat? It should be portable enough to bring with you to a shoot but I don't know how well it would take the weight of the DollyONE with a camera on it.
Hi Rafael, DollyONE won't fall off unless you intentionally drive the system off the table because it moves as much as the users want it to move and it immediately stops when there's a disconnection between the phone/app and DollyONE. We invite you to learn more about it at edel.kr/qJ. Our best, Asude
Hi Julian! Yes, you may use it with HeadPLUS! You may even purchase DollyONE & HeadPLUS bundle at edel.kr/qI for up to 15% off right now. Our best, Asude!
The DollyOne has potential if you could control it with the app with programmable motions like making a circle or arch with variable amounts. I think it is overpriced in my opinion! It needs a smooth surface, using it outside I wish you tried Posterboard, It's lightweight, easy to carry if you roll it up. This is just a thought or 2mm PVA foam or rolled corkboard as a surface would still be much lighter than a traditional slider!
I never understand tabletop sliders. Any time I use a slider I want to pick an exact spot and height to set the tripod. Not just set it on a table and go 😅 I mean every once in a while a tabletop slider could work but just the base of this costs as much as a professional edelkrone slider..
Neat. But that's the problem with these big brand names: They introduce something cool, but then slap on an expensive price tag to keep most of us from buying it. There's not a lot to this, could probably DYI something for cheaper.
it´s nice but expensive for what it can do. And it never can replace a slider because you always need a smooth surface to put it on to. That´s not very practical.
yeah fun toy but overall impractical, the wheels themselves makes this a very niche item where you need a super slick and smooth surface to work with. you can't take it outdoor unless you bring whatever you need to have a flat surface and such.. so why bother with that when you can bring your tripod, motorized slider and use it anywhere in any condition? oh also the price tag makes this even less appealing, almost the price of a Syrp Genie II which is not a gimmicky product.. so yeah fun toy, that is all
Right now, for what this whole system costs (1198$) I could rather buy: a Wiral LITE (389€), the Neewer 80 cm motorized slider with turn function (240€), a Bugs 3 Pro drone + case and 2 batteries (170€), motorized turntable (43€), a FeiyuTech AK2000 (314€), and a cheap aluminium tripod plus some accessories for the rest. As the gimbal and the Wiral even can do timelapses, outside as well, that means for 1156€ you get very much more flexibility than with this system for the price. I.e. this is not good value.
This was clearly designed to be used indoors. Much too limiting when brought outdoors. All the suggestions on how to improve its performance outdoors make it sound too impractical.
Obviously this has to operate on a smooth surface... how could you not have foreseen that? You can use a $5 piece of scrap laminated countertop; problem solved. Now, what to do about the ridiculous price?
Is this a sponsored review? And FYI viewers: Edelkrone controls product reviews, because you can only get their premiere gear from them, so be weary. That's a red flag in my book. You can't guarantee the testimonials are 100% uninfluenced.
Just need to bring a smooth office table with you for each shoot.
Hahaha yes that's true.. This product is for me one of the useless stuff 2019. I have a small skateboard dolly and I never find good conditions to use it.. But this skate dolly was 15 USD
🤣🤣🏆💪🏿🎞
Not to mention the $700 🤣
🤣
How about a yoga mat
Once a Roomba can be remote-controlled, it's game over for Eldelkrone
it can
But roombas make a lot of noise, but I guess that wouldn't matter if it's just b-roll
I was gonna say that $700 for the set is too much. Turns out it's just for the base?
I liked the concept but I don't believe it delivers enough to justify the price. I'd pay $200 tops just for the dolly base with those results.
Deaznam exactly, way too expensive
@@98JamesNixon Not all filmmakers are cheap you know, this industry is far from the budget perspective TH-cam loves to promote. This is an extremely useful tool for those that do commercial product work.
@@AyechinoProd Agreed. That's why Pros will invest in something better. Not a single test they did in this video looked good. This is not what "Pros" need and want to use. Too flawed and limiting in usability for the pros and too expensive for the amateurs.
Deaznam True, but I think we can both agree they kinda misused the product in this video as well. They didn’t really show its true potential.
@@AyechinoProd I could and would agree with you.... but: The fact is, that edelkrone sponsored the video. Sponsors are very specific with how they want their products represented - so they "very likely" told them to "show these 3 scenarios" and they "very likely" saw + approved the results (cause the product just can't do much better :D ) .
Edelkrone is one of the most innovative companies out there for filmmakers. I have yet to see a bad product from them, they're very consistent with their quality!
I can't find any bad reviews about Edelkrone and I find that strange.
I think the benefit of Edelkrone products is there ability to mix and match. Allowing you to slowly build up different setups.
You mentioned in your video that you couldn’t use a slider to get the effect because the slider would get in the way. Have you checked out the Edelkrone slider V2? I believe that the way it works on a tripod would allow you to get that forward moving shot. On a tripod when the slider moves forward/sideways, the slider retracts on itself. Just a thought...
Great video! Very interesting product. May I suggest (at least for smaller distances needed to be covered), going to a flooring business and asking for a small reminant of vinyl linoleum flooring. I think a 3 to 4 foot area of such material could be rolled up and easily taken on a shoot.
So good to have you back
do you still have and use these?
When will their be cheap thing vs expensive thing video? I enjoyed it and I use it as my diy film projects
Indy- I won't give up
Me- I trust you
Fans- We love you
World- We are always with you
Universe- One of the most important part of me is you 💖
Does it detect the edge of a surface? How good is it's repeatability? What is a type of shot that you could get with the dolly and the pan head? These questions i would like to know.
Hi Justin, DollyONE doesn't have an edge detection since it won't fall off unless you intentionally drive the system off the table. It only moves as much as the users want it to move and immediately stops if there's a disconnection between the phone/app and DollyONE.
As for repeatability, slight variances in position changes occur. With this bundle, you may set up a huge linear slide that is not possible with a regular slider and add a head movement. Our best, Asude
how much better is the 150 flex tilt head than its $20-30 counter parts? even if the off brands need tightened each time its moved, that would be worth the savings if you arent in a rush. if the off brands CAN be tightened that is
IS IT PRACTICAL ON A MUSIC CONCERT PRODUCTION LIKE ORCHESTRA
Eric is back thank god !
Can the motion control repeat its movement over and over? would like to know if it's a viable option for FX shots. Can I do a number of accurate repeated movement passes with the head, not the dolly?
You didnt tell, when using in interview mode, if you can make it go back-forward in a infinite loop... and what the comparison between their mini dolly. Thx !
Ohhhh shittt you back !!!! This is so cool
Have you taken it off any sick jumps?
How did you like the controls? Also what is the battery life like?
Looks like a neat piece of gear. They just need to add a 'track' that can mount to two tripods a la many of the sliders around.
The whole point of this dolly is so you’re not bound by a slider. If you’re going to limit yourself with a track that needs to be mounted between 2 tripods, then wouldn’t you be better off just getting a slider?
@@MrPhilbautista The track would be to negate the adverse effects of uneven/adverse terrain so you can still get ueber smooth dolly shots. That was the biggest criticism of the dolly in the vid (that sub-optimal terrain makes it difficult to get useable shots).
Better off getting a slider? If the budget is real tight most likely. But if you want the hands-off remote control aspect of this dolly then not so much.
@@sprocketblvd6758 There are sliders that are remote controlled. Edelkrone has one too, and it ain't for tight budgets. And it can be mounted on one tripod. Just like many other remote controlled sliders. Many of which are cheaper than this dolly.
Seriously, if you're looking to be lugging a track around with it, along with two tripods to support that track, that's your business and I won't try to convince you otherwise. Personally, this thing has too many shortcomings for where it's priced. If I'm mobile, I'd rather bring a gimbal and if I'm in a studio, I'd rather use a slider.
Hey Griffin,
Would it be possible to bring some kind of smooth, rollable surface with you to help even out street bumps? Or would the underlying bumps still make the footage too jittery?
Thanks!
That's the thought I had as well.
Where you paid to show this produvt?
Can you compare it with the janky looking orange three wheel style that have appeared for not a lot of cash on Amazon and eBay?
Nice to see a review of this device Griffin. Personally, I think its rather expensive. But I`d love for you to review follow focus systems for the GH5/GH5s.
You could use a rolled-up mat of some kind if you wanted to smooth out a rough surface.
can you show us a setup using the pan tilt and slider 1 v2 at the same time then add the turn table ( i know you need a second device to control the turn table
What is that light in the background at 2:30?
Your Son is so CUTE! 😍😘 I have to say it 🤗❤️ love this review thanks man.
Did I miss the review of the Headone?
I like their products and I want them all but 🤑🤑🤑🤑🤑🤑
I think this equipment was designed and intended for indoor studio work. It needs nice smooth and level surfaces.
I plan to order the HeadOne and Flex Tilt Head. After a month or two I'll get another HeadOne and the Tilt Kit but now that I see you and DollyOne I might get that 2nd instead of 3rd.
👋🏿😇😇😇😇😇😇😇😇😇👍🏿
Hi. I'm wondering if you still have this around to test and, if so, have you tried running it over the smooth side of a yoga mat? It should be portable enough to bring with you to a shoot but I don't know how well it would take the weight of the DollyONE with a camera on it.
That’s crazy!! I love it
😂😂😂 i can't find word's for this, 1000$+ for 2-5sek that you maybe use in a video. totally worth it
this product is great for Products and food
Use mine every week
Regards, Rick
You might be able to Use poster board for a smooth surface.
What keeps it from going right over the edge?
Hi Rafael, DollyONE won't fall off unless you intentionally drive the system off the table because it moves as much as the users want it to move and it immediately stops when there's a disconnection between the phone/app and DollyONE. We invite you to learn more about it at edel.kr/qJ. Our best, Asude
You sold me on the 6 inches of extra rise. Where do I sign up.
any way to plug these devices into power?
Cool. Now do a BFX version.
3:40 is that the Daily bugle?
@Indy Mogul: You might try using some sanded plywood as a surface when shooting out in public.
Jeremiah Lyles yeah and don’t for get the saw horses to raise the plywood off the ground. Hmm and a few rocks to place under the legs for leveling lol
I’d like to see longer example shots for your cinematic review. Just felt like your examples didn’t do it justice.
Can you use it with the headplus module aswell?
Hi Julian! Yes, you may use it with HeadPLUS! You may even purchase DollyONE & HeadPLUS bundle at edel.kr/qI for up to 15% off right now.
Our best, Asude!
For this money? - am I the only one here suddenly feeling like a pauper at a fashion show?
Having some apple boxes around would mean that you can do the dolly anywhere.
Of course, I understand that that’s not always possible.
The DollyOne has potential if you could control it with the app with programmable motions like making a circle or arch with variable amounts.
I think it is overpriced in my opinion!
It needs a smooth surface, using it outside I wish you tried Posterboard, It's lightweight, easy to carry if you roll it up. This is just a thought or 2mm PVA foam or rolled corkboard as a surface would still be much lighter than a traditional slider!
Amazing system=) the entire system costs less than a full frame g master lens!
Show the final examples for longer!
i miss the old indy mogul where you made everything on a low budget. now most of your vids are "look at this expensive thing ! Isn't it awesome?
I always carry a 4 foot long polished wooden plank with me everywhere. Up until now I haven't had any actual need for it but I spy an opportunity...
I never understand tabletop sliders. Any time I use a slider I want to pick an exact spot and height to set the tripod. Not just set it on a table and go 😅 I mean every once in a while a tabletop slider could work but just the base of this costs as much as a professional edelkrone slider..
exacyly. if i cant change the height to interview subject level, i have no use. tabletop stuff is for product shots and that's about it.
Can we control the speed
dope
6 inches of extra rise?? 😯
On location bring a roll of thick smooth plastic.
Looks great but pricing...😬
Neat.
But that's the problem with these big brand names:
They introduce something cool, but then slap on an expensive price tag to keep most of us from buying it.
There's not a lot to this, could probably DYI something for cheaper.
Bring your smooth marble floor with you everywhere.. it will work nicely
Bro, pick up a cardboard box from walmart. Smooth af
it´s nice but expensive for what it can do. And it never can replace a slider because you always need a smooth surface to put it on to. That´s not very practical.
yeah fun toy but overall impractical, the wheels themselves makes this a very niche item where you need a super slick and smooth surface to work with. you can't take it outdoor unless you bring whatever you need to have a flat surface and such.. so why bother with that when you can bring your tripod, motorized slider and use it anywhere in any condition?
oh also the price tag makes this even less appealing, almost the price of a Syrp Genie II which is not a gimmicky product.. so yeah fun toy, that is all
badass little device but holy F*** at the price!!!!
Right now, for what this whole system costs (1198$) I could rather buy: a Wiral LITE (389€), the Neewer 80 cm motorized slider with turn function (240€), a Bugs 3 Pro drone + case and 2 batteries (170€), motorized turntable (43€), a FeiyuTech AK2000 (314€), and a cheap aluminium tripod plus some accessories for the rest. As the gimbal and the Wiral even can do timelapses, outside as well, that means for 1156€ you get very much more flexibility than with this system for the price. I.e. this is not good value.
Peter is cute 💞
Just buy a remote control RC car. Its cheaper, funny, and you can make way more epic shots.
This was clearly designed to be used indoors. Much too limiting when brought outdoors. All the suggestions on how to improve its performance outdoors make it sound too impractical.
Obviously this has to operate on a smooth surface... how could you not have foreseen that? You can use a $5 piece of scrap laminated countertop; problem solved.
Now, what to do about the ridiculous price?
It's a car for cameras.
Anybody can be a film maker now....
Stealth Star that’s bad ?
1000$ and you still would need a flat surface to use it on? what is this Apple?
This better cost $20!
#tooexpensive
Seems pretty useless out of the studio because it needs a super smooth surface.
Is this a sponsored review? And FYI viewers: Edelkrone controls product reviews, because you can only get their premiere gear from them, so be weary. That's a red flag in my book. You can't guarantee the testimonials are 100% uninfluenced.
Too expensive, its easier to make such yourself for like less than 50
Stop paying companies so much for this shit. Its literally marked up 500% just because it's targeted to the video crowd.
wow thats very cheap omg
Useless gadget !!!