Really, really cool and clean build. The most impressive part of that whole video was how that dude just tossed that entire wheel and tire up there like it was nothing lol
I love this. You make a really good point about these trucks. Really wish my uncle didn't buy my grandpas 2014 F350 from him bc I would've been all over it. Its a Lariat with the ruby red paint and under 70k miles.
Thank you for all the inspiration. Your channel has helped save me hours of research on what setups would work best for is. Hope to buy a lift from yall in the next few years.
If you guys don’t mind sharing, what did the paint work run for the color match on the grill and bumpers? Looking to give my 2021 a little bit of a facelift and trying to decide if it’s worth it.
I have a 2011 350 dually. I really want to build it out similar to this truck, but curious about the rear end. If I get a different bed or fix the fenders am I able to just throw on new wheels and tires like its a standard single rear wheel? Thanks
One of the first things I'd forcibly remove if I bought a new truck, probably on the first trail I went on lol 😂I've never liked valances on 4x4 trucks. Seems like people either love or hate them.
just bought a ‘16 lariat long bed and can’t wait to start putting parts on it. One owner, super clean, first things first though it’s getting deleted so she can breath. Your truck is as close to perfect as it can be without the long bed, nice work.
@@CJCOffRoad Quick question, do you think a 37x11.50Rx17 would clear everything with this kit? I do prefer a tall skinny tire for the work I do. Thanks
I follow your beautiful channel and I owned a 2022 Raptor with a 35 package and it was sold and I used it for two years. I now want to buy a Ford F-150. There is a 3.5 V6 turbo engine in Saudi Arabia and a 5.0 V8 engine. Which one do you advise to buy or recommend buying a 2024 Raptor with a 37 package?
@@TrapphausmusicIt’s a tremor package so it’s got the 4.30 and the Goodyear duratracs. The computer in the truck says high 11s but I do have a heavy foot
Sweet truck. I have an 11' F350 that I came very close to doing this on. You guys were very helpful when I was messaging. The 350 will soon be a dedicated work truck, and I'll get a 250 and do this to it.
Really, really cool and clean build. The most impressive part of that whole video was how that dude just tossed that entire wheel and tire up there like it was nothing lol
Bro handled it like a champ, I had to play it again. It was poetry in motion
Wyatt is an animal! Always blows us away but that's his preferred method vs lowering the lift.
finally!!!!! 11-16 content!!!!
Lmao I always bug em on instagram about it
It's been long overdue!
Great build guys. I personally love the 11-16 models.
They need to bring back a diesel excursion!
Steel body 11-16 best trucks 👌🏼👌🏼👌🏼
I love this. You make a really good point about these trucks. Really wish my uncle didn't buy my grandpas 2014 F350 from him bc I would've been all over it. Its a Lariat with the ruby red paint and under 70k miles.
Got Damn @ 3:20 Daddy-Hoss overhead pressed that 38" Toyo like it wasn't shit
Thank you for all the inspiration. Your channel has helped save me hours of research on what setups would work best for is. Hope to buy a lift from yall in the next few years.
Looks like an Excursion!!
It really does with a shell on the back!
Used to have a 2012 exactly like this but long bed with 4.5” dominator system. This makes me miss it so much 😢
Love the set up! 👍🏼
So clean
nice work. looks good
Nice build.
Steel bodies on top😎
What Carli suspension/lift package do you recommend for a truck that will pull a 30ft gooseneck with a skid steer 5-6 times a year.?
If you guys don’t mind sharing, what did the paint work run for the color match on the grill and bumpers? Looking to give my 2021 a little bit of a facelift and trying to decide if it’s worth it.
I have a 2011 350 dually. I really want to build it out similar to this truck, but curious about the rear end. If I get a different bed or fix the fenders am I able to just throw on new wheels and tires like its a standard single rear wheel? Thanks
Awesome tremor valance would be the cherry on top.
One of the first things I'd forcibly remove if I bought a new truck, probably on the first trail I went on lol 😂I've never liked valances on 4x4 trucks. Seems like people either love or hate them.
@ I don’t think anyone likes them just the factory adds them to get fuel mileage up for the epa
We actually did swap the valance to the smallest one available for the 11-16 trucks.
@CJCOffRoad do you have that listed where it came from?
@@motocannon1838 tremor valance has all the ford years on there
just bought a ‘16 lariat long bed and can’t wait to start putting parts on it. One owner, super clean, first things first though it’s getting deleted so she can breath. Your truck is as close to perfect as it can be without the long bed, nice work.
Was any fender trimming needed to clear these tires at full steering lock and compression? The mono color scheme makes this truck look brand new.
Yes, 38s take Decent trimming of the front bumper/brackets, as well as the fender liner and fender, front and rear.
@@CJCOffRoad Quick question, do you think a 37x11.50Rx17 would clear everything with this kit? I do prefer a tall skinny tire for the work I do. Thanks
Yeah that world work perfectly! Only minor trimming required.
Beautiful truck, I have a 15 350 long bed will this calrli set up help the ride on this truck as well
“This truck is perfect and extra valuable because it’s never been modified.”
“In this video we modify it.”
We always like to start with a blank canvas!
I follow your beautiful channel and I owned a 2022 Raptor with a 35 package and it was sold and I used it for two years. I now want to buy a Ford F-150. There is a 3.5 V6 turbo engine in Saudi Arabia and a 5.0 V8 engine. Which one do you advise to buy or recommend buying a 2024 Raptor with a 37 package?
If you can afford another raptor get that. Buy the 5.0 and supercharge it
Looks like a lot of body roll taking those corners, no? Like everything about it but think it would look perfect w/o the grandpa cap.
We were pushing the truck pretty hard through those to keep up with the camera car!
I’m looking to get some bigger tires for my 2022 f350 tremor 7.3 Godzilla probably 37s/38s do yall get many people lifting gassers?
How many mpgs are you getting?Do you have 3.73 or 4.30?
@@TrapphausmusicIt’s a tremor package so it’s got the 4.30 and the Goodyear duratracs. The computer in the truck says high 11s but I do have a heavy foot
What specific ball joint press are you using, I haven’t found one that fits that track bar joint.
they used a snap on, i personally have a OTC CA 7149 and it works very well. I believe Harbor freight just came out with a copy of the snap on press
Took the words right out of our mouths! Spot on.
How much was spent for this build ? Would love to know thinking about shipping my truck out your way
where are you located?
@ by
By
New York
Cost totally depends on the exact options, but shoot us an email and we'd be happy to quote you out. Sales@cjcoffroad.com
And you removed all the chrome....good call!
It’s amazing how color match will bring a truck into the modern era
Sweet truck. I have an 11' F350 that I came very close to doing this on. You guys were very helpful when I was messaging. The 350 will soon be a dedicated work truck, and I'll get a 250 and do this to it.