Citroën C4 1.6 petrol not starting, P1694 case study.
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
In this video I explain how to diagnose a faulty crankshaft sensor on a Citroën C4, trouble code P1694.
The code description does not forward you in to the sensor direction, but when looking at the live data, it becomes obviously the no signal from the sensor.
Hope you enjoy the video.
Any questions please put them below.
Like always, thank you for watching!
My parents just bought a second hand Citroen C4, 1.4, petroil/LPG (LPG system was installed later). During the first ride, after stopping for petrol refill, it wouldn't start again. An error mensage saying: "anti pollution faulty" appeared. The mechanic tried to fix it but on a second ride, while driving(!), the car just turned off!! (and then it wouldn't start again).The thing is sometimes the car starts again, and works as if nothing happened in the first time. I don't know the trouble code that appears on the "diagnostic machine", but I'll speak with the mechanic about this live data/rpm sensor. I will buy a cranckshaft sensor and give it a try, hopping that works.
Thank you so much for your video!
I'll let you know how things work
Hi
Thank you for watching and for your comment...
Don't spend money on parts before you know the fault codes and/or looking at the live data... As you might be wasting money if the problem is something else...
Replaced crank sensor same, replaced ecu same, finally replaced BSM and it worked
Thanks very much for this video! Helped me with my C4 not starting
👍👍👍
Got into this problem yesterday, but car started after lots of attempts and didn't wanna star again today. All symptoms and error code lead to the same censor fault. Thanks for sharing. Hopefully there is the problem.
Good luck..🤞
Thank you for watching and for your comment!
@@LMAutoRepairs Thank you, but unfortunately, after changing the very sensor with a new one, nothing changed :( Engine tries to start for 2 seconds and stop rotating... will keep you updated what was the problem.
@@ivanidelibaltov7396
What codes are you getting?
@@ivanidelibaltov7396 any news ?😀i think i have the same problem
@@ΚώσταςΠ-κ1ω Problem was solved long ago, in the rellay box one of them was faulty because was losing contact constantly, was replaced and problem gone. Hope this will help and you will soon let it go. Buy yourself a Toyota, Honda,something else, but a french car...
I have had the similar problem and the mechanic told me to get the BSM unit. Cause he said the problem is the short circuit thingy. It's really hard to find the used BSM unit.
Great video, these are the ones you should be making, keep up the good work!
Thanks.
I will try...
Thanks, you just saved me a load of time
👍👍👍
Thank you for watching and for your comment!
So if you have this problem and after fitting crankshaft sensor it still won't start what else could it be? Great job again!
Many other things...
Scan the car and go from there...
Thank you for watching and for your comment!
I am planning to get this Autel MaxiCOM MK808 Bi-Directional Control Scan Tool from Amazon. Will this be more than sufficient? Would a device that connects to my laptop be cheaper and better than using a handheld one with a small LCD?
Great stuff as usual, thanks, mate
😊
Thanks!
👍👍👍
Did you like the Citroen C4? I am planning to use this to teach my children basic car servicing. Is everything easy to access in the bonnet?
Never owned one...
Can't really advise...
I guess that for that, will do just fine...
👍👍👍
Great video and very good attention to detail 👍
😊
Thanks!
👍👍👍
hi I have a citroen c4 2006 1.6 sx were is the camshaft sensor located thank you
1693 my code controlled engine starting and stopping anomaly. Also have immo code and ecm locked.
I think I may have the same problem - but the car does start sometimes - and refuses to at other times. I can push/bump start it though. Maybe a faulty sensor? I have ordered another, hopefully it will sort things out!
Sam Peirson
Hi
If you haven't scanned the car, is only guess work... but might be that is the same issue.
Hope the new sensor sort things out for you.
Thank you for watching!
lmsvvavr is the code here permanent or would a normal start clear it? the car has been scanned but, alas, the issue has never occured while at a garage (multiple garages).... and a fault code has apparently never been picked up.
Sam Peirson
Hi
If whatever caused the non starting condition, logged a fault, the fault would still logged, even if not occurring or already rectified.
The difference is, the ECU would say if the fault was present on in the memory...
Hope that helps...
Did the new sensor solved your problem?
great job. I owe you a beer, if you are coming to spain
Lol
I will have it...
👍
hi i had this problem and ive changed the crankshaft censor and the car worked for a month or so. now it might start at the first turn off the key or quite a few turns before it start had AA out they said it the crankshaft censor have you any idea again im lost?
Idea of what?
If is the sensor, you will be able to see it on live data...
Was the sensor a genuine part or an aftermarket?
Aftermarket can be temperamental...
👍👍👍
Hi mate
I did change the crankshaft sensor but still not start. this time it didn't give any crank at all. Please help help. I have C4 2008 petrol 1.6.
Hi
Why did you changed the crank sensor?
Have you scanned the car before?
Have you looked at the live data to confirm that the sensor was not reading?
Thank you for watching!
camshaft sensor where is it located can u make a video or let me know thanks
Top of the engine...
Is the crank shaft sensor easy to change your self on these Citroen C4??
Yes... 1 bolt and that's it...
Thank you for watching and for your comment!
Thanks for the post.... Really helped
Thanks!
👍👍👍
Dear ny bro... u save my mrceds-vito?u are so engle.god bleese u
smart work good job
Thanks!
👍👍👍
Hello sir!
How i can fix depollution system it usually comes out on the dashbord when i start the car?
Hi
That's a generic description for many different faults...
Scan the car and go from there...
Thank you for watching!
Hi bro. How do i reset the ECU without machine
You mean the codes?
Thanks for sharing this 👍
Eric
No worries... thank you for watching!
Hi my citron c4 coupe vtr 1.6 vtr keeps giving me crank and cam senser code we replace the crank senser but no luck in where the cam senser is
On the top of the head...
It can be the actually timing...
Check it...
Thank you for watching!
@@LMAutoRepairs thanks bud will do
@@nazeemsarang1066
👍
Hey mate, my partners car crank sensor hits 160. Car won’t start, seemingly very similar. Do you think it would be this? Was originally showing a few codes, after a reset and a trial of starting we just get the same p1693 code
Could be... just don't buy cheap aftermarket parts...
👍👍👍
@@LMAutoRepairs thank you mate! Ordered today. in regards to that also. I’m trying to get a cam shaft sensor too, which the local shops near mine look almost identical to the crank sensors? Do you know if they both look similar, or if this place is potentially selling the cam sensor as the crank?
Depending on the engine, they can be quite similar...
@@LMAutoRepairshave found the car to still have this p1693 after replacing, would you any chance recommend somewhere to look next? Thank you
@joshuasolly53
Are we talking about the same car and same engine?
It is there any other codes?
Hello, I have the same problem with c4 1.6 16v petrol P 1694 no engine start , two weeks in service without any result. Any help please? Thanks
It is all explained in this video...
Not really sure what kind of help you want more...🤔🤷♂️
Thank you for watching and for your comment!
LM Auto Repairs could be bsi module also?
@@B3by
Without proper diagnosis is impossible to say... sorry...
thank you for sharing.great video
Thank you for watching!
wow very good
😊
Thanks!
👍👍
Bro thksss somuch u so great
Thanks!😊
I have auto parking brake fault someoek tried to programme it. But it won't let it happen and I have changed the caliphar citroen c4 picasso 2015
You must have some trouble codes that will help you and guide you in the right direction...
Thank you for watching!
@@LMAutoRepairs is it better me to get programs from the dealer
I'm having this problem on my Citroen C4 1.4 2008 (hard to start and turns off by itself) after scan it shows P0366 crank shaft sensor. Is the sensor bad?
Thanks
Possibly...
Further testing might be required...
But, visually check wiring, connections etc...
Thank you for watching!
👍👍👍
Everything seems ok with wiring and with the connector.
I'm going to buy a replacement tomorrow.
Thanks again
👍👍👍
Update
The part is now installed, the car now is perfect.
Original part was made by Siemens, but they didn't have it, so I bought Febi brand.
Now I have a problem on the starter maybe because I tried to start the car several times before I find the problem. Now the starter makes a noise but the motor don't turn. But if I stop cranking and do it again it cranks ok. I do think the bendix its bad, what do you think about that?
Thanks
@@teltras68
Is a possibility... a poor contact somewhere is also possible...
👍
Hi, Happy New year! I have two fault codes on my Peugeot 807: 0480 - fan assembly (GMV1) relay control chopper; 0481 - fan unit relay control (fan 2) low speed. The fan comes on immediately I start the car, which supposed not to be so. Please what could possibly be the cause.
Check the fan relay circuit...
Thank you for watching and for your comment!
@@LMAutoRepairs Thank you.
@@LMAutoRepairs Sorry to ask, is there anything in particular I should check? Because I'm not that electric savvy.
@@easyE0803
Start by checking the relays itself, connections etc...
@@LMAutoRepairs ok, thank you.
Hi i have gota 308 petrol not start and the same code?
What the sensor have you change please??
Watch the video... all the info is on it...
@@LMAutoRepairs i watch it but i dont understand good and i don't see the piece
@@constat42
Crankshaft sensor...
I have a c4 1.6 hdi and the engine doesn't do anything at all. It doesn't even crank. I put the key and when I try to start nothing happens. Battery ok checked. Any ideas ? Thanks
JJ sam
Does the dash comes on?
Yes it does like nothing is wrong. (Sorry for my English) It so strange because battery is Ok (even I have tried to start the car with the battery clamp with no success). However, there is a message that says "eco mode active" which, as far as I know, it appears when there is no battery. Today I have tried to start the car. Firstly, the car cranked twice or three times every time I turned the key on, but at the end, nothing happens, like there was no more battery but I confirm that the battery is ok, because if it was the battery I would have started the car with the battery clamps. Could it be the BSM (under the hood with all the fuses)? I forgot to say that the car stopped suddenly when the owner was driving it and since then, no way to get the car started. Do you know if there is any relay that controls the electrical start of the car or something like that? Thank for you videos, I watch them all.
Hi
First thank you for watching my videos, and hopefully following my channel!
There is main power relays, and the starter motor relay...
I would start with the basics first..
Check fuses and test relays, both one by one...
Check accessible plugs, like the BSM plugs, remove them and inspect for corrosion, poor contact etc...
Tackle the crank issue first...
Have you scanned the car already?
Yes I have already scanned the car but nothing. Fuses cheked all fine, just relays I check them tomorrow.
Well, thanks for your helps.
Thanks for share! Great video ;) it's save a lot of time!!
Thank you for watching and for your comment!
I have c4 1.6 16v lpg on first start in the morning i have hard starting what is the problem
Bojan Trajkoski
🤔
I am not a wizard... Will need more than that to help you...
Scan the car... look at some live data etc...
Thank you for watching!
keep up the good work!
No worries... Thank you for watching and for your comment!
hey where is camshaft sensor located?
shane kelly
Hi
Depends on the engine... but usually top of the engine, and usually Cambelt side... on this particular engine I can't really remember...
Thanks for video, i have same issue on C4 1.6 VTR+ (06) after being in for CAM belt change.
Couple of weeks before CAM change, the “Depollution System Faulty” alert came on, couple of days later the Engine management light (yellow). When having CAM belt changed, asked them to check Depollution error , came back with Unknown Error. 3 days later, out of the blue it wld not start, same as video. Had the Crank shaft sensor replaced, Ran for 5 mins then cut out, now won’t start again. Mechanics thinks maybe EMS box?? Any suggestions, thanks in advance
Anthony Barnes
Any codes?
Live data, has that been analysed?
Mobile Mechanic has not mentioned any codes, he changed sensor from experience. He is taking it to a garage tomorrow with more sophisticated monitor. Will let you know what happens. Worry is he thinks might be EMU, which from video’s like yours, not sure it is? Any idea how much EMU would cost? Thanks again for the video and reply, will reply with result/outcome, and will ask for codes
i got the same problems with citroen 4 1.4w petrol
got same in diesel semi auto fault coming p1734 engine running fine not going into gears at all not moving message say faulty gearbox contact Peugeot
Bro ny Citroen 1.6petrol it cant start ni more plss help me
Abdullahi jama Diriye
Have you scanned the car?
Hi Citroen C4 Grand Picasso 07 it's a hot day and a car won't start I think it's down to a cam position sensor but I've been told this to so I do not know which one is which and how much torque to do the bolt on the pulley wheel ? Thanks you in advance for help
Don't replace nothing without properly diagnose it...
Or you might be wasting your money...
Do you have how to scan the car?
Thank you for watching!
Kenneth Ford w
👍🏻👍🏻👍🏻
☺️
👍👍👍
hello mate. i have the same car and i have a problem with it that id like to ask you about. if you have the time could you get back to me
Hi
Go for it...
👍👍👍
@@LMAutoRepairs so i have a Citroen c4 07 1.6 similar to the on in the video, the speedo on the car isn't working and im wondering if you have ever came across this problem. when i turn the ignition the engine starts and everything works, the speedo has a number 0 then goes off and when it drives it doesn't register the movement of the car and show the speed.
@@jamieprice3016
That can be a few different things...
No other warning lights on the cluster?
You might need to scan the car and go from there...
It has an ABS light on that's it. Other than the standard seatbelt lights
@@jamieprice3016
The speed is most likely coming from the ABS... if the ABS is reporting a fault... there you have it...
Scan the car and go from there... see what the ABS module is reporting...
after replaced crankshaft sensor still the same, and eco mode actived.
rpm in 0 when cranking time.
Wong Tsung Ming
Hi
Check wiring... if you have one, measure the output of the sensor with the oscilloscope... to ensure you have signal, and you didn't get a faulty 'new' sensor...
Helllo Are you solve the problem ?
help please p1734 been told ecu fine and 2 sensors r fine where else to look for even main dealer strugling to find help b appreciated thanks
Master Blocky Gaming
Hi
I know this is basics... but has the wiring been checked?
Thanks for reply ECU wire s been replaced still same engine runs no gears no drive car in se London chance of email or get in touch plz peu 5008 1.6 hdi 13pla
Good job
Luanch X-431 Pro is better than Autel
عبدالله العريبي
Hi
Thank you for watching and for your comment!
I never worked with Launch, so can't really comment...
Although, all the tools will have their pros and cons... and also depends on which market you work the most...
tnx a looooot..
Aleksandar Trajkovic
No worries... hope it has helped you...
Yes you are....one mehanic want around 300$ for this ...and you help me very very much...txn bro
this happens when you buy a citoen(low quallity shit)or(no quallity shit)BUY A VW OR A CAR IN THE VW GOUP
nerf pupilsproductions.nature
Hi
You are probably right... but any car independent of the brand, does have flaws, pros and cons...
My opinion...
2we have 3 citroens an they are 3 times at one month in the workshop no service but for problems and we have a vw tha needs only a cervie onc a month you know oil etc
Spark plug
?
th-cam.com/video/dg9CAkVT4Dg/w-d-xo.html подскажите как это исправить? Не могу завести.
English?
Thank you for watching!
Tell me how to fix it? I can't start it.
@@slevinkelevra9204
I am not a wizard...
Check power grounds etc... check fuses...
Otherwise anything I suggest will be pure guess work...
Fuckin bullshit car