Cleaning or Replacing the Front ABS Wheel Speed Sensor - Peugeot 307

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 59

  • @amzso
    @amzso 3 ปีที่แล้ว +6

    Just bought an 18 year old 307. Never imagined I would find such great videos for a car this old an cheap! Keep up the good work man.

    • @screwsnutsandbolts
      @screwsnutsandbolts  3 ปีที่แล้ว +2

      Thanks, will do! :)

    • @michaelfawcett7843
      @michaelfawcett7843 3 ปีที่แล้ว +1

      yes these car are good to work on at home

    • @mihaiganea2100
      @mihaiganea2100 5 หลายเดือนก่อน

      ​@@screwsnutsandboltsHi
      I have error p0366 from peugeot 307 2003 1.6l petrol....the car not starting, but if clean error with obd2 ,start car, but now no more possible to clean the error, and car not starting.
      I replace and check the crankshaft sensor, have 490ohm resistance , same the original.....I check the wire untill to ECU, and is ok.
      Some sugestion, what must to check ?

  • @kubaczek20
    @kubaczek20 ปีที่แล้ว +3

    High level of showing what to do and filming it. Congrats 😊

  • @rickard9294
    @rickard9294 5 หลายเดือนก่อน +1

    Thank you for a video that is easy to watch and follow!

    • @screwsnutsandbolts
      @screwsnutsandbolts  5 หลายเดือนก่อน

      You're welcome, thanks for watching !

  • @ebutalha9338
    @ebutalha9338 2 ปีที่แล้ว +1

    Hello there. In my Peugeot 307 Bva automatic transmission vehicle, I am getting an error in the speed information from the abs. The gear goes into malfunction mode. Is abs sensor cleaning enough? what else can I do. thanks

  • @trevorcornes1056
    @trevorcornes1056 2 ปีที่แล้ว +5

    Excellent well shown and explained 👍

  • @cristianesiqueira2632
    @cristianesiqueira2632 2 ปีที่แล้ว +1

    Hi , I changed the tires and now is making a noise when i break and the ABS light turn on. Are'you guess something alse happned when the guy changed the tires?

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว

      It's possible, but I'm not sure what could be causing the noise. I would take it back to the guy who changed your tires and explain the problem

  • @michaelfawcett7843
    @michaelfawcett7843 3 ปีที่แล้ว +2

    just one thing my friend are the rear abs sensor s the same , but one bolt s upper part of sensor and other bottom part of sensor

    • @screwsnutsandbolts
      @screwsnutsandbolts  3 ปีที่แล้ว +2

      The front and rear sensors are not identical but they are replaced in a similar way

    • @michaelfawcett7843
      @michaelfawcett7843 3 ปีที่แล้ว +1

      @@screwsnutsandbolts thank you bud

  • @LudotoKuche
    @LudotoKuche ปีที่แล้ว

    Is the half-shaft ring on the bearing located? Is it available as a replacement part?

    • @screwsnutsandbolts
      @screwsnutsandbolts  ปีที่แล้ว

      This video might help you: th-cam.com/video/TtNtDefWLMw/w-d-xo.html

  • @UsualYaddaYadda
    @UsualYaddaYadda ปีที่แล้ว +1

    Excellent video; really well produced. Thanks!

  • @Mr11ESSE111
    @Mr11ESSE111 2 ปีที่แล้ว

    i change sensor but still nothing changed on speedometer!!could it be fuse in fusebox because i see that there is fuse of 10A which are for speedometer

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว

      This is not a speedometer sensor. This is a wheel speed sensor for the ABS braking system

    • @Mr11ESSE111
      @Mr11ESSE111 2 ปีที่แล้ว

      @@screwsnutsandbolts hmm,i ask some mechanics and they sayed it is related with speedometer sensor for models from 2006-09 and newer got under engine speedometer sensor

    • @Mr11ESSE111
      @Mr11ESSE111 2 ปีที่แล้ว

      @@screwsnutsandbolts they cheat me then, i was thinking same as you but they see my number of chasis and say ed its not speedometer sensor under engine then this on wheels !! i will see tomoroow under car

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว

      Good luck !

    • @Mr11ESSE111
      @Mr11ESSE111 2 ปีที่แล้ว +1

      @@screwsnutsandbolts i will need it,i see thst fuse can be problem too and tgere is fuse for speedometer too

  • @MiroslavJokovic-yk6zm
    @MiroslavJokovic-yk6zm ปีที่แล้ว

    Ima li neko. Iskustva sa Pežo 206 HDI 2000 kub 2001 godište sa kilometar satom neradi jedno kilometar pa proradi sta li je riknulo❓

  • @Mr11ESSE111
    @Mr11ESSE111 2 ปีที่แล้ว +1

    so plug are hidden behind plastic arch

  • @acmthere3674
    @acmthere3674 3 ปีที่แล้ว +3

    Many thanks master, my warning abs/esp light just came up. I presume it's dirty.

    • @screwsnutsandbolts
      @screwsnutsandbolts  3 ปีที่แล้ว

      It's one of the possible causes

    • @toxmaster1
      @toxmaster1 3 ปีที่แล้ว +3

      You should check with some diagnostic tool what error is in memory. Recently have same abs/esp error sometimes, diag tool shows problem with rear right wheel sensor.Removed, cleaned sensor and magnetic ring on bearing, spray sensor connector with contact spray and no more esp error.

    • @michaelfawcett7843
      @michaelfawcett7843 3 ปีที่แล้ว +1

      BUD CHAINGE them they cost £11.00 on eBay

  • @iyaramonk
    @iyaramonk 3 ปีที่แล้ว +1

    Exactly what I was looking for :)

  • @Mr11ESSE111
    @Mr11ESSE111 2 ปีที่แล้ว

    is it on same place speed sensor on Peugeot 207 too?

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว

      I'm not sure, sorry

    • @Mr11ESSE111
      @Mr11ESSE111 2 ปีที่แล้ว +1

      @@screwsnutsandbolts i ask some mechanics and seems that older 207 2006 -09 have on the wheels sensor while redesign 09-12 have under engine

    • @screwsnutsandbolts
      @screwsnutsandbolts  2 ปีที่แล้ว

      Thanks for the info

    • @Mr11ESSE111
      @Mr11ESSE111 2 ปีที่แล้ว

      @@screwsnutsandbolts i must check on mine 207 is that is true on tire /wheel to see is it so or not because i have same problem with no speedometer working

  • @mirror_6336
    @mirror_6336 3 ปีที่แล้ว +1

    You may use air flow sensor cleaner.

  • @miguelpereira7934
    @miguelpereira7934 2 ปีที่แล้ว +1

    Great Vid thanks a lot...hope was so easy to do the same in my C5

  • @jonjon9047
    @jonjon9047 6 หลายเดือนก่อน +1

    No need whatsoever to remove the liner. Access the plug is factored in to its design.

  • @kevcat8655
    @kevcat8655 3 ปีที่แล้ว

    How many ABS sensors are the car in total?

    • @screwsnutsandbolts
      @screwsnutsandbolts  3 ปีที่แล้ว +1

      I think there's two at the front and two at the rear

  • @josecarlosmontalvolorenzo1168
    @josecarlosmontalvolorenzo1168 3 ปีที่แล้ว +2

    Good job, thanks 👍👍

  • @andytipping70
    @andytipping70 ปีที่แล้ว +1

    all the way through i was screaming brake disc wear - i couldnt possibly have put the wheel back on without doing a brake service after seeing those discs!!!😱

    • @screwsnutsandbolts
      @screwsnutsandbolts  ปีที่แล้ว

      The video was only focused on the the sensor and the steps needed to replace it.

    • @jase171973
      @jase171973 ปีที่แล้ว

      You should see mine. As long as the mot guy doesn’t flag it then they are good. Manual states min thickness.

  • @franklupker9293
    @franklupker9293 4 หลายเดือนก่อน

    NOT GOOD, you do not have to take the whole platic out, there is a small peace you can open, what about the left side the sensor is the same, but sits different

  • @Passengervehicles
    @Passengervehicles 3 ปีที่แล้ว

    Good video

  • @philipmaguire9209
    @philipmaguire9209 2 ปีที่แล้ว +1

    Only dam issue here is thd Gap I find

    • @philipmaguire9209
      @philipmaguire9209 2 ปีที่แล้ว

      Gap sensor is set 2mm... perfect as soon as you take it off .. abs light triggers have to get dam 2mm right ✅