Great for the shop to catch the pilot bearing before getting it all back together. Nothing worse than getting recharged or having to bring your shit back and start over just because they bypassed a $20 bearing. Awesome video 6speed! Welcome back homie.
That transmission is the WINNER...oh...ohhh...I've been doing research and talking to other customers of ben calimer and overwhelmingly the opinion is the ben calimer trans is a grenade. The 5th,6th gears are not hardened, the noise from the trans is terrible and the customer service is bad ,did they offer you a warranty? No one is getting warranty service. I pray 🙏🏿 you have a better experience.
There is plenty of very happy calmer customers out there my self included… if you do enough searching on the internet about anything you will always find some shit… but from a first hand customer with that trans maiking 950 to tire and 3 years of beating the shit out of it and still going strong… oh and Ben customer service is top notch . Always answer calls and emails … sorry you went down that rabbit hole of finding some bs on the internet
Happy to see u back bro! Been following u since i got my 16 a couple years ago and u posted the vid in the tunnel. I copied ur exhaust setup because of that video lol
Glad to hear you’re back up and running 6! I will be pulling the trans from my 2019 Bullitt soon to do the rebuild myself. I’m going to upgrade as many parts as possible while I’m in there and top it off with a good clutch. I wish I could get hold of one of those GForce Transmission gear sets that Calimer uses. I will be anxiously awaiting content and reviews on the transmission and clutch. Will you be running a WOT Box on the car to allow for No Lift Shifting? When you get your break-in miles, will you at least make some hits at the drag strip to show us what the setup is capable of? Lastly, have you upgraded your half shafts yet?
love the fact that you make the even the simplest of items look cool. and even the process, that is long and taxing look like a music video! love the content fam!
6speed, why did you go with the LPX over the LPXHD? Isn’t the LPX rated at 800 hp? I was wondering if you might be on the verge of making too much power for that clutch?
You can also use wet tissue/toilet paper, done hundreds of clutches this way. Also dude lubing the input shaft is putting on WAYYYYY to much lube. That shit can flick on the clutch plates and contaminate them, causing them to slip. Just needs a light smeer. Clutch needs 500miles, calimers trans needs 3000miles for break in from what I've seen. Hope it's going well.
Well I guess I’m gonna be getting a clutch and a drive shaft soon 💵 because I’m having issues too with the transmission. Glad you back man been a long time 💪🏾
Not with these current gas prices lol. I was planning on buying one but found out I'll be spending 400 a month on gas. So I asked myself what is the next best thing? A Nissan leaf. That will cost about 20 a month for fuel lol.
Great for the shop to catch the pilot bearing before getting it all back together. Nothing worse than getting recharged or having to bring your shit back and start over just because they bypassed a $20 bearing. Awesome video 6speed! Welcome back homie.
thanks man I appreciate it.
Steve and Matt at Untamed are phenomenal at what they do
bro your the reason i wanted a mustang gt in the first place and you truly inspired me to build my shit. glad ur back bro
wow thank you bro!!!! Appreciate you
@@Real6speed im transmission shopping right now i got a gen 1 making 730whp with a 3.73. im thinking the gearing in the stage 3 might be long enough
Welcome back bro been waiting on this one
That transmission is the WINNER...oh...ohhh...I've been doing research and talking to other customers of ben calimer and overwhelmingly the opinion is the ben calimer trans is a grenade. The 5th,6th gears are not hardened, the noise from the trans is terrible and the customer service is bad ,did they offer you a warranty? No one is getting warranty service. I pray 🙏🏿 you have a better experience.
There is plenty of very happy calmer customers out there my self included… if you do enough searching on the internet about anything you will always find some shit… but from a first hand customer with that trans maiking 950 to tire and 3 years of beating the shit out of it and still going strong… oh and Ben customer service is top notch . Always answer calls and emails … sorry you went down that rabbit hole of finding some bs on the internet
Man I’m so happy your back I found your channel a while back and ever since then I haven’t stop watching
I really appreciate that. Thank you
I just bought the Stage 3 and the Mantic 9000 clutch with the McLeod performance line.....I'm excited for it too!
Damn, never seen that bread trick. That transmission set up is definitely wicked!
Any follow up videos about this trans ?
Thanks in advance
Bro I was excited about this build…. Glad you’re back 💪🏽💪🏽💪🏽
thanks bro😎
This was the first upgrade I had done before anything else. To many horror stories over this trans to waste time on other mods until this was done.
Nice ride I have a 2019 GT myself it’s a manual
What’s up 6speed? Can you give us a full review on the Calimer Stage 3? Is it all that people say it is, or does it have some shortcomings?
Props to those mechanics. Good work and getting it done right the first time.
He talks so damn much I would have had it in already
We back, my boi!!!! 🔥🔥💯💯💪🏾💪🏾
thanks for still sticking around bro 💪🏽
Hey 6,speed, still waiting for a Calimer Stage 3 tranny and Lethal Performance clutch review if you have time. Thanks
No doubt Untamed puts out some monsters!
Need that 6 speed hoodie
merch soon👀
Welcome back! 💯
Happy to see u back bro! Been following u since i got my 16 a couple years ago and u posted the vid in the tunnel. I copied ur exhaust setup because of that video lol
Yesssssiirrrrrr that Calimer Stage 3 gonna treat you well. She wines but those GForce Gears are fuckin solid.
yessir i already know. The gear whine is not that bad though at all, my car is just to loud 😂
@@Real6speed facts, if the the car rattled the best solution is a new exhaust lol
Glad to hear you’re back up and running 6! I will be pulling the trans from my 2019 Bullitt soon to do the rebuild myself. I’m going to upgrade as many parts as possible while I’m in there and top it off with a good clutch. I wish I could get hold of one of those GForce Transmission gear sets that Calimer uses. I will be anxiously awaiting content and reviews on the transmission and clutch. Will you be running a WOT Box on the car to allow for No Lift Shifting? When you get your break-in miles, will you at least make some hits at the drag strip to show us what the setup is capable of? Lastly, have you upgraded your half shafts yet?
How's the gear whine? Lot of NVH after?
Is that transmission still holding up and how much hp you putting down
Do you need a tune after installing due to the difference in gear ratios compared to the stock MT82?
love the fact that you make the even the simplest of items look cool. and even the process, that is long and taxing look like a music video! love the content fam!
really appreciate that, thank you.
Welcome back brother 💪🏿💪🏿💪🏿💯💯
thanks my guy💪🏽
Yessir glad u back
Welcome back bro
Big Dawg back. Bra i been having life and car problems with my srt8. Im glad you back bro, you inspire me thug it out.
Stay strong and positive, keep pushing. Hang in there my boy💪🏽
Steve is the 🐐
Glad to see you back bro 💪🏾
i really appreciate that bro!!
6speed, why did you go with the LPX over the LPXHD? Isn’t the LPX rated at 800 hp? I was wondering if you might be on the verge of making too much power for that clutch?
where is that shop ?
Schaumburg, Illinois ...
You can also use wet tissue/toilet paper, done hundreds of clutches this way. Also dude lubing the input shaft is putting on WAYYYYY to much lube. That shit can flick on the clutch plates and contaminate them, causing them to slip. Just needs a light smeer. Clutch needs 500miles, calimers trans needs 3000miles for break in from what I've seen. Hope it's going well.
Ya it's been a long time bro love the car bro
Glad to see you back in the saddle again bro. 🙌
Literally just did the bread trick last night for a clutch job at home. It works like a charm everytime.
I’m glad you’re back kept going back to the video of you ripping it threw the tunnel 🤝💯
really means a lot. Thank you
Did he say 196k miles?
Just watched your exhaust vid from 2 years ago and you temping me to get an s550 💀s550 or 03-04 termi.. can’t decide 🚶♂️
What song is at the intro
my homie makes music, but this song is still unreleased to the public.
Look up Hott Headzz, this ones just unreleased at the moment
Well I guess I’m gonna be getting a clutch and a drive shaft soon 💵 because I’m having issues too with the transmission.
Glad you back man been a long time 💪🏾
Dud I just met you irl right now
Bro where have you been ?????
watch my last video lol
Wassup bro I’m from Chicago and i fw yo channel let’s do some collabs
So glad to see you back bro u inspired me to start saving for a stang of my own bro 🥵🥵
Not with these current gas prices lol. I was planning on buying one but found out I'll be spending 400 a month on gas. So I asked myself what is the next best thing? A Nissan leaf. That will cost about 20 a month for fuel lol.
hellllll yeahh
Hell yea looks like you got everything coming together, now you just need some new mickey Thompson’s 😂 hopefully not soon though
nice
🤙🏻🤙🏻
Why they talking shit about how you sit in your car lol?
Let's get it!!! 🐎
9th