FNR 4 in 1 Programming Renault Laguna PH2 Key Cards in Windows 10!!!
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- FNR 4 In 1 Key Programmer With USB Dongle works in Windows 10!!!
Cards from ALI express!
Software and manual for install is in my folder!
You may download here:
uloz.to/file/c...
Password: tocassido
If you need new link, send me message!
Thank you for watching!
Aliexpress link:
2019 Newest FNR 4 In 1 FNR Key Prog 4-in-1 For Renault/For Nissan/for Ford Car Key Programmer With USB Dongle free shipping
s.click.aliexp...
yeah!!!! thank you guy! it's work on Windows 7!! vive la République Tchèque !
Perfect works!!!! Thank you!
Thank you so much for your help. I just saved more han 300€ euros.
Hello! Do I need any already programmed key for this to work?
Awesome, I ave the FNR but can't have it run on windows 11 could you send me the link of the software and also the manual to install?
Thanks
you should have put the installation of the software. IT's the hardest part to my mind!
My key cards were defective from the cover, I then exchanged them and my daughter magically removed a transponder, so ordered 2 new ones and the key only works at 315 MHz, but the system normally works at 433 MHz, so neither of those work for me ZV still the keyless go, I can unlock the immobilizer and start the car, but nothing more,
If I use the original transponder, I get the message Key not recognized.
An idea ?
MS reports the file to be infected with Win32/Nagram!rfn which is ransomware. Turning off Defender and AV seems unwise.
Bonjour. peut on utiliser le programme sans mettre le contact du véhicule. Je n'ai plus aucune clef. Merci
true code run time error 8002. ????
hello, i am having runtime error 76. how to solve ? thanx
pour moi ne marche pas sur espace 4 ph1 de 2003, procédure failed à la dernière étape
tengo windows 7, como hizo para instalar el programa que no puedo, por favor
Hola Lukas, no me reconce el dongle azul con la key..... en otro pc con WinXP si me lo reconocía... que puede pasar ?
Graciasssssssssss
bonjour est il possible d'avoir une explication plus détailler que la video merci
Hi all hardware compatible or not for example ODB2 v1.5 USB? I see Renolink device special for Renault. But expensive if i buy chipper ODB2 v1.5 USB cable and empty Card Key can i handle this. Thanks.
hello friend it does not work on renault megane 2
And yes ford and nisan olso dont work .Meybe fnr 4 in1 is not good seler .I dont know .Job finish with Xtool x100 pad 2 pro .
Can you send me a list of renault model which encodes without pin imno x100pad 2 pro? Thank you.
Ahoj Lukáši, mám Mégane II a koupil jsem tohle na zkoušku i s kartama. Nainstaluju na Windows 10 a dostanu se do fáze, kdy se má program spojit s autem. Jenže ten zůstává bez odezvy. Žádná chyba, žádná akce. Poradíš mi??
Pokud si z Prahy, můžeme se na to zkusit podívat. Mělo by to napsat aspoň něco.
Zdravim, muzu se zeptat, je mozne se s vami domluvit na naprogramovani karty? Dekuji
Добрый вечер подскажите при выборе меган 3 не появляется кнопка выюора соединения , что может быть?
Thank you for the video! I just gonna order and I hope it does work for my Megane 2.
Did it work?
Hi, does it work on Espace IV 2008? Thank you
Hello, sorry I dont tried
Can you tell me if it is possible to read errors using this device?
Or is it only suitable for cloning keys?
If yes, what software can be used?
truecode clown bonne interface mes fonctione que pour les
laguna 2 ph 1 scenic 2ph 1
espace 4 ph2 velsatis ph 1
ne fonctione pas pour toute les phase 2 des model cité
FOR ESPACE 4 PH 1 ? NO?
Comment se fait l'installation sur Windows 10 svp ?
Ensure no cards is in the reader its keep saying when no card is in the reader
Same, did u fix the issue?
@@bogdanvulic1124 Dont remember how I got it working. I tried for like 4 hours. But then I got it working. Didnt do anything special. So maybe its little bugged. I dont know. But I refused to stop trying. I fixed 3 new keys. So it's working :)
@@bogdanvulic1124 I was actually going to try again soon, because on 1 key the locker is broken. And on 1 its working some time and i need to press hard. And 1 is working perfectly. So the aliexpress key is maybe not the strongest build. But all of them can start the car. But planning to upgrade, because they are cheap anyways. But i remember i was struggling with getting it to work, so I'm not looking forward to it.
@@DidrikHansen alright thanks you very much for information:)
@@DidrikHansenhello again! Just want to tell you i got it working right now. The problem was i choose wrong port on my laptop. It was port 4 from factory but it should be port 12 to get it working.
pero esas tarjetas son virgenes, originales ya con codigos y las has reprogramado? un poco mas de informacion no vendria mal gracias
I tried to add key kard on renault Senic and i cant do that .Just error
Which cable and USB Key? Which year Is Scénic
Please direct links for Software and manual for install. Cannot find in your folder.
uloz.to/file/c7Bfokxud1c9/fnrwin10bytocassido-zip in folder is txt with manual in english :)
Any sugestion?
funciona para megane 3 y scenic 3?
Use a second hand card reader and Bingo !!! (was my terrible problem terrible to )
Why did you insert the same card 4 times in a slot? Does it have to? I managed to program 2 new cards bought from eBay. Immobilizer part works but not the remote buttons (doors won't open/close)
4 times is for confirm code from reader. Remote buttons works about 2 minutes later :) You may try it again :)
how are u send me new website for download software pls thank u so much
Ahoj! Musím dať použitý motor ECM. So 4fnr môžem panenizovať a dať Pin a Vin môjho auta Fluenci tak, aby to fungovalo? prosím pomôž mi.
To netuším. Myslím, že to není možné. Je to pouze pro karty.
The file is no longer available. Could you please upload it again? Thanks!
uloz.to/file/c7Bfokxud1c9/fnrwin10bytocassido-zip
its very hard to tell what you are doing here ??
Video Is better. Manual is in file. My english is not perfect, sorry man
he literally just follows what the Diag tells him. The popups say things like "make sure there is no card in the reader", there´s nothing magical happening.
Hi the link is dead.Could you send me a valid link please?
ulozto.cz/file/c7Bfokxud1c9/fnrwin10bytocassido-zip#!ZGR2ZGR2A2IvLwqxMQuwZmp3MzV0MGywZJEzMQIPoS9DrJAxBN==
How install driver's interface for Windows 10 ?? Where can i found drivers ?? Thank you
I made manual. Download drivers and manual here: uloz.to/file/c7Bfokxud1c9/fnrwin10bytocassido-zip
@@lukaskalian1221 FULL of Trojan / Virus alerts LOL ..... I used an old laptop without internet. The program works ;)
Ph1 no ph2
Do you need to have an initial key as I have lost mine.
No, you don't need to. The code is read from the card reader.
what interface I need to notebook ? Can I run with simple obd2 interface ?
You need FNR Cable. You can buy on Aliexpress.
Hi, when i do al the installing process and i want to open FORD CODE.EXE it tells me that the program cannot be searched, any tips?
You must copy folder to program files. Watch to manual 🙂
Not received expectec response , help
with TrueCode.exe, right click on the file -> Properties -> set compatibility to Windows XP Service Pack 3 or similar.. tested on Win 8.1 and it worked that way
Error: Pin not accepted. Why? Laguna 2 ph2
Do you have tokken key?
@@lukaskalian1221 I have a key. I have already successfully made other cars. Scenic 2, megane 2. This error at laguna2 phase 2. After "start process"
Sorry man, I dont know. I made keys on my Laguna 2 PH 2 2004 year.
@@lukaskalian1221 oh, my car is l2 ph2 2007
@@SleepyBearAngomer привет решил проблему?
Recently I bought Renault Can Clip diagnostics (Chinese clone, not the cheapest, but better version, with golden (fully yellow) board, Cypress chip).
Everything seems to work fine, but when I come at step "card programming" I'm missing that option. Instead of SC010 button/option (card programming) I have another options SC004 and SC006.
I'm not sure what is the cause. I tried more Clip versions, same on all of them. Tried more cars, same... Or it's up to Clip diagnostics, but I repeat, it's better version, not the cheapest one??
What can I do now? Should I maybe buy a Renolink and try to program in it? Or should I buy something else?
Thanks in advance
Do I have to use the FNR cable or can I do it with any other OBD interface device?
Only FNR Cable.
Hi Lukaš, are you in Slovkia? Can you help with programming a key for laguna 2 ?
Hello, I live in Czech rep. 🙂
@@lukaskalian1221 škoda :)
Thank you for replying.
Can you please let me know how to get the car pin and put it to usb flash drive?
So the software can run in Windows 10 without any problems?
Yes, but I tried only Renault.
That's perfect, I got a Renault Mégane 2. But I read the software run only in Windows 7. Thanks for the demo video Sir
@@pablobaena2598 Is all ok in Windows 7? I have some problems in this OS.
@@LastRomanticUA i used it on windows 10 and no problems.. you should be fine with your windonws 7
@@pablobaena2598 Thanks! All is ok. Very important to install correct driver.
hello can you give me the link from the cards?
1url.cz/3zpJf
@@lukaskalian1221 thx but your key is silver not green like on the link you gave me :D
@@petarbozinovski8685 I put my original key (silver) to the neoriginal card. Green key need sharpen.
hi LUKAs,
Dobry ako sa volá to zariadenie diki
Je to kabel, který se jmenuje FNR 4 in 1. Program s navodem pak ke stazeni viz. odkaz v popisku.
I am the only one getting trojan horse virus on my pc ? Interesting
might or might not be a false alarm... virustotal shows warnings from like 30 antiviruses but I did not see any strange activity after running the program. The software is hacking its way through the OS for the reader to believe that it is a real diag from Renault that costs like thousands of euros, so obviously the antivirus might see it as a malware while it just tries to bypass some security checks.