Looks great. I wouldn't have chose that location for the junction box however, on a rainy day that could get wet and short the system. And the rings were too small in my opinion, I would've opted for bigger rings to center it around the brake rotors...those big caliper housings on the front wheels wouldn't allow the front rings to be centered.
Got a tip. On the front steer installation, mount the ring before the brake calipers. This way if you have to replace the pads, you won’t have to remove the ring to remove the calipers. The flexible brake line will be on the outside of the ring instead of inside.
Sometimes a mechanic can only go so far... Buy the kit yourself and just pay someone to install it.. It helps if you got a friend who does this kind of shit.
The wheel rings should not make contact with the brakes or any moving parts. Any heat that the brakes may give off will not be hot enough to affect the wheel rings.
@@emtpete010 best advice search a body shop or custom wheel shop, check their reviews and ask them if they do this type of install. You want someone who know because as you get these installed you will need your breaks pumped too since you had to remove the break
Well, you can look up each part individually. Like look up "how to change rotors on a (your car)". Theyre mostly all the same for any car, and its seems daunting at first but is really easy. ChrisFix does videos with awesome camera angles and tailored to people whove never done it before. His YT channel is where i learned everything on cars
I like the ideal. I got lights on my motorcycle. However, my question is can you do this too a motorcycle🤔 Side note; when I pop wheelies they can see the wheel up in the air in the dark😁
that is a lot of work for a few show points, but if it means edging out the competition to get on the podium, then I guess it's worth it...yes? I guess this it why ALL the lifted trucks just go for "rock lights" on their dirt-free, lifted truck on 22s and 40-series off-road tires.
I believe this company used to be named Street Glow once before I figure because you don't see Street Glow brand lights no more I still have a LED Street glow brand exhaust tip
Yes, you would need to connect the power wire to a turn signal 12-volt source. If you do this tho you will not be able to turn the kit on when the turn signal is off.
Affect. yes. it requires power, therefore, it will consume power from the battery. I doubt it will adversely AFFECT the factory alternator or battery, as the current draw is low.
I don't have a track car, but I do have a friend with a suped up 350z with some ceramic pads on, and he managed to burnout most of one of his led rings, but whether that was due to the questionable quality of the product he had or if that can be expected from this mod in general has yet to be determined.
it is called lifestyle. import lifestyle. my multipla has glow rings on wheels, also underglow, trunk audio glow, custom interrior light, true underground style bumpers and skirts, custom hood, spoiler, new pearlescent paintjob, hydro filmed rims.
Any mechanic should know how to install it. It's not that mechanically hard. I had a mechanic install mine and he charged me $50 he said it wasn't hard at all
Why do you install the front differently from the back? It seems to make more sense to install all wheel lights in the method of the rear wheels. The front ones look like you have to do extra work.
Can you guys do this on a Zero motorcycle? the reason I ask is because these are an all electric motorcycle that Im planning on getting in the near future and Im not sure if maybe the installation is different from other bikes you've done
Buy new dust covers paont them good high gloss and calipers in high gloss. Walmart has 3m connectable led strips crazy bright does same thing and way cheaper n easier to do i have done it on my cars bikes and everything for ever.
Well it depends, if you use blue your motor runs cooler but slower. Red goes faster but hotter. Green is fuel efficient but it'll cost performance. If you use all three you'll see a significant increase or you might have a lemon, who knows
The size wheel ring that is needed does not depend on the size of your wheels. You will need to measure the diameter of your vehicles brakes and rotors to determine which size wheel ring you will need. Feel free to contact our customer support and we will be able to help you figure out exactly what you need for your vehicle.
How do the wires not get tanhled during the rotation of the wheel? I see both wires attached to the LEDs, but how do you ensure it doesn't become twisted with the rotation?
The lights are mounted to the dust plate and not the actual wheel. The dust plate does not spin. Similar to the way your brake calipers are able to sit there without the lines getting twisted.
You need to measure the diameter of your brakes. You can find the sizing guide on the product page: www.ledunderbody.com/4pc-million-color-led-wheel-ring-light-kit/
2 questions 1st) is the only way to turn them on and off is through the box mounted in glove box. No app or remote? 2nd) why wouldn't u just hook positive and negative straight to the battery? Seems kind of pointless to run all the wires inside when u went right past the battery.
Your specific application may be different but we used the rivets because of how close the rotor was to the dust plate. A nut and bolt would make contact with the rotor.
Before you get light into the rim, you better paint the brake calipers in a hot color 😉
This guy knows whats up.
Why paint the calipers?
@@williamsantiago7303 looks better
Looks great. I wouldn't have chose that location for the junction box however, on a rainy day that could get wet and short the system. And the rings were too small in my opinion, I would've opted for bigger rings to center it around the brake rotors...those big caliper housings on the front wheels wouldn't allow the front rings to be centered.
Got a tip. On the front steer installation, mount the ring before the brake calipers. This way if you have to replace the pads, you won’t have to remove the ring to remove the calipers. The flexible brake line will be on the outside of the ring instead of inside.
I'm wondering why they didn't just install all the wheels in similar fashion as the rear wheels.
@@husnihassan9037 To show how to use both of the types of brackets they put in the kit would be my guess.
Lol when the voice sounds like how it's made lol
Sounds kinda like the same music too.
Looks legit 2 me. I would of put protection around them wires.
Very very nice Ledglow. Great job people. Thumbs up on the video.
Interesting...
I want to do this to my car ..but that's a lot of work...
Pay somebody lol
Exactly. I aint doing all that just for lights. Taking my caliper off? Hell naw. I like to flash, not desperate to flash.
Sometimes a mechanic can only go so far... Buy the kit yourself and just pay someone to install it.. It helps if you got a friend who does this kind of shit.
👨🍼
Nice lights, but not easy to install
Just a simple question .... what about the heat of the breaks versus the plastic of the led?
The wheel rings should not make contact with the brakes or any moving parts. Any heat that the brakes may give off will not be hot enough to affect the wheel rings.
@@ledglow where can I get this installed properly?
@@emtpete010 best advice search a body shop or custom wheel shop, check their reviews and ask them if they do this type of install. You want someone who know because as you get these installed you will need your breaks pumped too since you had to remove the break
It looks soo good and professional ... but i am looking something operate red in the wheels when we press brake.
this video really cleared it up for me thanks.
Damn led glow.. I just want my car to glow 🥺 guess I have to become a whole ass electrician/mechanic lol
Well, you can look up each part individually. Like look up "how to change rotors on a (your car)". Theyre mostly all the same for any car, and its seems daunting at first but is really easy. ChrisFix does videos with awesome camera angles and tailored to people whove never done it before. His YT channel is where i learned everything on cars
I just installed mine without removing any calibers or rotors
hey what you use to make the lights hold then?
... and that's the only way I'd do this. Not taking my calipers off for this.
No u was
Just don't use those things in small towns, you all know that the small town cops have no hobbies
Marc Aliventi Aliventi got my first ticket after almost two years lol
Yep Officer Jealous A-Hole they're literally everywhere.
Agree 💯 out here in Cali, see it all the time. And front window tix too
True shit😂
🤣🤣🤣
Love this idea, but that's a bit of work.
I like the ideal. I got lights on my motorcycle. However, my question is can you do this too a motorcycle🤔
Side note; when I pop wheelies they can see the wheel up in the air in the dark😁
Very cool looking, I noticed someone on the highway with these and is why I looked this up online
I have a B12
that is a lot of work for a few show points, but if it means edging out the competition to get on the podium, then I guess it's worth it...yes? I guess this it why ALL the lifted trucks just go for "rock lights" on their dirt-free, lifted truck on 22s and 40-series off-road tires.
I believe this company used to be named Street Glow once before I figure because you don't see Street Glow brand lights no more I still have a LED Street glow brand exhaust tip
Looks great! Can't wait to try this on my Mustangs!
are led wheels still a thing in 2019? when I clicked I was surprised it was not a video from a few years ago ;)
I'm do it to my Challenger
@@mackhemi8986 that's hard.. 👌🏿
That's like asking are rims, or are stereo systems still a thing bcuz they were hott in the '90s.
Hey I was wondering if you guys sell any of your products in a store or sell them in a big box store like Walmart?
Excellent question
Brother!this product can get in state of Malaysia. U have export over there???
For the love of god, please run all cabling that's outside the cabin in split tubing. Protect your investment.
Excelente trabajo. Buen video. Me imagino hacer el cableado complicado.
Amazing and beautiful! Is there any possibility to install on wheels Mercedes-Benz SLS AMG?
Measure the diameter of your rotors and brake calipers to see if any of the sizes we offer will fit.
Is it possible to connect them with the vehicles turn signal? In other words, blink together with the cars legal turn signal?
Yes, you would need to connect the power wire to a turn signal 12-volt source. If you do this tho you will not be able to turn the kit on when the turn signal is off.
Really good and understanding. Kudos👍.
Now, Like how much will you charge me if I bring you my car to do exactly what I saw in the video?
Sorry, we do not do customer installations.
it's actually easy for diy guys with a tool shed
are these actually led lights and will it effect my car battery?
Affect. yes. it requires power, therefore, it will consume power from the battery. I doubt it will adversely AFFECT the factory alternator or battery, as the current draw is low.
The battery will be always ok as long as the engine runs.
Shorter: dont turn them on if the engine is stopped
Every car needs one of those!
Dónde puedo comprar esas luces
@@Jรรคภร www.ledunderbody.com/4pc-million-color-led-wheel-ring-light-kit/
Donde estan localisados
What's the heat rating on this, if put on a track car or is this strictly for show cars?
I don't have a track car, but I do have a friend with a suped up 350z with some ceramic pads on, and he managed to burnout most of one of his led rings, but whether that was due to the questionable quality of the product he had or if that can be expected from this mod in general has yet to be determined.
We do not recommend this product for track cars.
This is great!!! Can I use this video for my compilation? You'll get credited of course. Thanks
it would look weird if not centered correctly lol
I would also put anti-rust on the screws
Shaq o Neal got this on his demon
You forgot step 1....
time travel back to the early 2000's before installing!
carbonRRpilot I would love to see a guy bring this to the car meet I can already see a Honda Civic😂
This ain't like that weak underglow from back then this different.
carbonRRpilot these wheel been kinda popin and they those underglow lights you referring to
🤣🤣🤣🤣🤣🤣I was thinking that too still kinda cool I GUESS
great video
All this struggle for just a glow. Phew
it is called lifestyle. import lifestyle. my multipla has glow rings on wheels, also underglow, trunk audio glow, custom interrior light, true underground style bumpers and skirts, custom hood, spoiler, new pearlescent paintjob, hydro filmed rims.
Exactly. To much prep
I'll just buy the lil screw on one u put on the tire 😁👌🏾
@@megs8654 JEG BRÆKKER MIG
Very good jop super from turkiye🇹🇷🕋😎😎😎😎❤️
I prefer the dark.
Change the carb and the distributor to gain 75 hp........
im sure that car doesn't use none of that calm down
coils + fuel injection
Lmao the last car made with a carb was a jeep 1991, lmao this uses fuel injectors and coils, further more that’s not an instant 75 hp
What's da cost and where do we get dis in India plz reply awsome and Vry glossy look
You can order them through our website. www.ledunderbody.com/
they are very cool 👍
God I wish all brake discs came off that easy.
Wouldn't that be nice. This car was basically brand new for this install.
This is awesome you guys are amazing
Great idea to use a led light
I don't see how the junction box is protected by water or debris in that location
Locate a clean dry secure area to mount the junction box🔊🔊🔊👂)))))
Every ricer was happy to see this
Here in Brazil this service is called a service from Bahia that likes to appear that is what the owner of the car is wanting.
Hahahahahaha Baiano, mas é legal
Wondering why rivets on the front, but screws on the back?
We couldn't use the screws in the front because they would contact the rotor.
Scommetto che fra na settimana con il nero fatto dalla polvere dei freni quel led si vedrà ancora. 🤣🤣🤣🤣😂😂
HOW MUCH DOES IT COST TO INSTALL .I WILL LOVE TO HAVE ONE ON MY CAR .THIS IS BEAUTIFUL .PLEASE SEND ME A REPLY. THANKS
DORKUCHO TANIHU me 100
Figured that went outa style in the 90s.
Good luck finding someone to install these.
Any mechanic should know how to install it. It's not that mechanically hard. I had a mechanic install mine and he charged me $50 he said it wasn't hard at all
Why do you think this DIY video exists lol
@@seanwatts392 50.00 a wheel
You got my head spinning lol
I wanna get me some for my car but I don’t know anybody or how to put them on
Wouldn't nylon lock nuts work better? Otherwise it looks pretty cool, something to think about on my kid's car.
In germany not allowed 😭😭😭 love it
rob dem alles was verboten ist macht bekanntlich Spaß, man darf sich nur nicht erwischen lassen ;-)
Why do you install the front differently from the back? It seems to make more sense to install all wheel lights in the method of the rear wheels. The front ones look like you have to do extra work.
The brake calipers for the back wheels are smaller than the front. Therefore, the wheel ring was able to be installed without removing it.
How do i take many peaces of LED light strips to many places in my room? Please make a video with that
Very Very Good
wow, that's alot to do.
Geez, I'll just put a flashlight behind the wheels.
Nice brother👍👍👍
Can you guys do this on a Zero motorcycle? the reason I ask is because these are an all electric motorcycle that Im planning on getting in the near future and Im not sure if maybe the installation is different from other bikes you've done
Theres a different type of light they sell for motorcycles or that are made for it
as much I wanna do this here in Australia but it's not street legal ..
Do y'all sell a wheel kit for motorcycles??
At the moment we do not.
Buy new dust covers paont them good high gloss and calipers in high gloss. Walmart has 3m connectable led strips crazy bright does same thing and way cheaper n easier to do i have done it on my cars bikes and everything for ever.
Quick questions
How much horsepower does it add ?
All the horsepower.
@@ledglow lol 😂 👌
@@ledglow just a joke 😂 .. have a nice day🔥
Well it depends, if you use blue your motor runs cooler but slower. Red goes faster but hotter. Green is fuel efficient but it'll cost performance. If you use all three you'll see a significant increase or you might have a lemon, who knows
Yes!
Congratulations! You are good idea it
Check to see if these are legal. Just to know when I can cut them on and off.
i noticed you guys connected this kit to a fuse but with the underglow kit, you did not. You connected it to the terminals? why the difference?
No difference. We just like to show variety with our different installs.
i love it
The lights are cool, but my truck has drum breaks in the rear. Looks like I'm assed out.
Top esse trabalho eu adorei agora é presizo ver si e permitindo no brasil ok são Paulo brasil
That’s so cool!
Do u have continus color changing lights for 17 inch tires?
The size wheel ring that is needed does not depend on the size of your wheels. You will need to measure the diameter of your vehicles brakes and rotors to determine which size wheel ring you will need. Feel free to contact our customer support and we will be able to help you figure out exactly what you need for your vehicle.
Greetings, where do I get the rings alone, I looked for 2
Where to buy this pls send me the link
I like this led lighting but its too much hard work
How do the wires not get tanhled during the rotation of the wheel? I see both wires attached to the LEDs, but how do you ensure it doesn't become twisted with the rotation?
The lights are mounted to the dust plate and not the actual wheel. The dust plate does not spin. Similar to the way your brake calipers are able to sit there without the lines getting twisted.
NICE
This is probably a stupid question but are the ring light sizes universal or something because I can *Not* find one for an 18" rim.
You need to measure the diameter of your brakes. You can find the sizing guide on the product page: www.ledunderbody.com/4pc-million-color-led-wheel-ring-light-kit/
2 questions 1st) is the only way to turn them on and off is through the box mounted in glove box. No app or remote? 2nd) why wouldn't u just hook positive and negative straight to the battery? Seems kind of pointless to run all the wires inside when u went right past the battery.
1) An upgraded bluetooth control box is an option when adding the item to your cart.
2) You can also do that. For this install we just chose not too.
@@ledglow thank you.
Will this play with the beat of the music?
Yes, this kit will.
Where can I have this done on my car
Wow is great
Where is it being done. Which place is this
Good job
So good.
The LED wires were zip tied to speed sensor wires, not brake lines like the narrator suggests.
🤔
Good works
Will you be able to still change your brake pads if you need to?
Yes.
THIS IS FINE, FOR CARS THAT HAVE BACKING PLATES......MY C5 CORVETTE DOSENT.....WHAT DO I DO NOW????????????/.....
they dont fing know
wheel well ... there's a kit for that also
Could I not just use a nut and bolt with locktite instead of rivets or self tappers?
Your specific application may be different but we used the rivets because of how close the rotor was to the dust plate. A nut and bolt would make contact with the rotor.
Brother! This product can be in our bengaluru
Look crazy
Wow Its Amazing
The people who think this is hard work are pathetic.
As far as the people who think it's not waterproof...they are. All sealed up