How to use IR sensor with arduino? (With full code)

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 มิ.ย. 2019
  • IR (Infrared Sensor) is an electronic instrument that is used to detect any type of obstacle/object & it is also used to detecting the black & white colour.
    In this video, I am showing a basic operation of IR sensor. You can use this concept to make your project.
    You can buy IR sensor from your nearest electronics market & also you can buy from Amazon also.
    //// Coding///
    github.com/PabitraKumarGhorai...
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 321

  • @TamalBarua-nv2gp
    @TamalBarua-nv2gp 3 ปีที่แล้ว +19

    Your explanation is too good. I love the way you explain. But I am really confused, some other guys on YT showed that the IR sensor will give "1" or "HIGH" as output when any object is detected in its range. But in your video, it's been showed that the IR sensor will give "0" or "LOW" as output when an object is detected in its range, as you said, "IR sensor works as Negative Logic" - in1min 23 sec scence.

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว +2

      Thank you so much.. please subscribe to my channel for more informative videos

  • @neerajpandey6585
    @neerajpandey6585 2 ปีที่แล้ว

    Really helpful brother may God bless. U

  • @Bianchi77
    @Bianchi77 2 ปีที่แล้ว +1

    Creative video, thanks for sharing :)

  • @abhinavrajesh2975
    @abhinavrajesh2975 9 หลายเดือนก่อน

    The ir sensor i have turns off when it detects a obstacle is possible to get the intened result by interchanging the high low?

  • @santanubhandary9193
    @santanubhandary9193 2 หลายเดือนก่อน

    Very good explanation with practical

  • @spursten4259
    @spursten4259 ปีที่แล้ว +3

    Hello there i have done the same as yours but my LED light is without an abstraction with the two red IPR lights on

  • @ravikumarshahu358
    @ravikumarshahu358 ปีที่แล้ว

    Hello I am doing a project on drip irrigation and I want to make a smart drip irrigation that the motor can start automatically and off automatically in the given time. So which kind of sensor is used and what are the coding of it.

  • @Anonymous-ok9ul
    @Anonymous-ok9ul 2 ปีที่แล้ว +1

    i want my led that is connected to IR sensor to not to give any output(LED ON) in first detection but internally just count it as 1 and however, in second detection the LED should turn ON and it should stay on forever. It would be great if anybody can guide me onto it since i have been looking for it all over the internet and couldn't find any relevant info.

  • @fareedahmed1369
    @fareedahmed1369 ปีที่แล้ว +2

    You deserve 100k subs

  • @tonyclixby
    @tonyclixby 2 หลายเดือนก่อน

    Thank you. Easy to follow.

  • @ilhammiranto5974
    @ilhammiranto5974 3 ปีที่แล้ว +2

    THANKS FOR THIS TUTORIAL. You help me from this. THANK YOU.

  • @cadillacescalade5428
    @cadillacescalade5428 2 หลายเดือนก่อน

    I am wanting to use servo and IR sensor for a small sweep sketch
    How would I go about that ?

  • @dipayandutta9929
    @dipayandutta9929 2 ปีที่แล้ว +1

    really helpful, Can you please share what will be the IR sensor code for black line detection?
    Actually, I'm making a bot car which should follow a black line.

    • @hatchman1640
      @hatchman1640 ปีที่แล้ว

      have it pointed down, when the output reads high it means it detects black, probably as most black materials don't reflect IR light, so if it reads low it's gone wrong. I'd recommend having a white surface with the black line, and whatever you use to make the black one make sure it doesn't reflect IR light. It won't be able to detect other colours though

  • @lpavlovic100
    @lpavlovic100 2 ปีที่แล้ว

    Indian tutorials are the best

  • @manojmistryeee9443
    @manojmistryeee9443 2 ปีที่แล้ว +1

    Bro thanks for this video i want to connect 2 ir sensor in the ardiuo but i dont know program pls refer us thank you

  • @soumyajitbhattacharjee
    @soumyajitbhattacharjee 4 ปีที่แล้ว +2

    Plz make tuitorial2 IR logic that we use to control a gate

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว +2

      Ok I will do..pls stay tuned with my channel

  • @lgc8334
    @lgc8334 3 ปีที่แล้ว +2

    hi there, is it possible to use 4 ir sensors with 4 led light? what should I change with the coding. tq

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      You should write 4 ir sensor logic.. that's all

  • @9chickenwingz
    @9chickenwingz 2 ปีที่แล้ว +1

    How do I use NIR sensor and arduino to measure glucose ?

  • @Anonymous-nm1uo
    @Anonymous-nm1uo 3 ปีที่แล้ว +4

    uh i cant get my ir sensor to work when i plug it in it displays 2 green lights instead of 1 as shown in the video

    • @neoh1530
      @neoh1530 5 วันที่ผ่านมา

      could you solved it????

  • @sbsimpletechnical8775
    @sbsimpletechnical8775 3 ปีที่แล้ว

    Good knowledge

  • @devisriadithya5907
    @devisriadithya5907 2 ปีที่แล้ว

    the explanation and code i undurstood but the example u used ,can u give link like for the ir sensor example

  • @I____am____sanskari
    @I____am____sanskari 3 ปีที่แล้ว

    can you make it like a toggle switch .. means if it sense one time led remains on and it sensed next time LEd will be off?

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      Its possible..but you need to write your own logic to execute that

  • @ahmaddian8707
    @ahmaddian8707 2 ปีที่แล้ว

    Sir why my out put led in ir sensor not working but i already adjust the sensitivity

  • @innovative_ideas
    @innovative_ideas 4 ปีที่แล้ว +1

    Awesome brother

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว

      Thank you

    • @kawalsingh1804
      @kawalsingh1804 4 ปีที่แล้ว

      Sir
      Touch sensor+ir sensor
      Arduino led bilnk code

    • @kawalsingh1804
      @kawalsingh1804 4 ปีที่แล้ว

      2sensor touch sensor+ir sensor
      2Led bilnk Arduino code

  • @BabiiHuiling
    @BabiiHuiling 2 ปีที่แล้ว +1

    Hi! I connected according to your video and key in the codes too, but my LED light remains permanently on despite not having any obstacle in front of how. How should I fix this?

    • @bongtechguide3732
      @bongtechguide3732  2 ปีที่แล้ว +2

      In your IR sensor, It has a potentiometer for adjusting the sensitivity of the ir sensor. You need adjust this potentiometer by using a screw driver.

  • @akshat13
    @akshat13 3 ปีที่แล้ว +1

    Hey I had a doubt can u please tell me what pins stands for what in my sensor , it says : G o/P 5v for the three pins from left to right , so which pin is what

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      Is this Arduino microcontroller?

    • @akshat13
      @akshat13 3 ปีที่แล้ว

      @@bongtechguide3732 Arduino Uno

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      Please connect the IR sensor according to my video..

  • @terunks9567
    @terunks9567 3 ปีที่แล้ว

    Can u make video such u put the sensor on bag then u put something like screwdriver in the bag.. if the screwdriver is taken out.. then buzzer will ON.. i want to connect the buzzer with this IR sensor.. because i need to do the project.. but i dont know how to do it.. if u can explain.. u deserved my subscribe bro

  • @madhuvlogs3946
    @madhuvlogs3946 2 ปีที่แล้ว

    Supper bro and thank u

  • @shreyakavitha5873
    @shreyakavitha5873 7 หลายเดือนก่อน

    Sir whether it works even in sunlight

  • @inderjeetkaur8270
    @inderjeetkaur8270 2 ปีที่แล้ว

    How to make a switch with help of it sensor?? I mean once I will bring my hand fir one second led will turn on.. I should be glowing until I bring my hand again... How to do that?

  • @hilarryhenry831
    @hilarryhenry831 2 ปีที่แล้ว

    great explanation!

  • @NAVEEN-kannadiga
    @NAVEEN-kannadiga ปีที่แล้ว

    THANK YOU BRO 😀

  • @odontosdental
    @odontosdental 4 ปีที่แล้ว

    Awesome bhai

  • @arundoylenka5705
    @arundoylenka5705 ปีที่แล้ว

    Hello, in the IR sensor..
    The black led is the IR Receiver and the white led is the IR TRANSMITTER right?

    • @poweritup2
      @poweritup2 11 หลายเดือนก่อน

      yes

  • @ASROK_1K
    @ASROK_1K 4 หลายเดือนก่อน

    thank you

  • @kisangore988
    @kisangore988 4 ปีที่แล้ว +1

    Thanks

  • @mohammedabdulla8693
    @mohammedabdulla8693 ปีที่แล้ว

    Hello, I am searching for 0mm to 5mm measurable sensor, request to help in this regard please

  • @sheanespanola6128
    @sheanespanola6128 3 หลายเดือนก่อน

    is there an option where i can set a specific distance where the IR sensor detects and if the obstacle reaches in that distance then it will tell the led to turn on

    • @xyz.5512
      @xyz.5512 3 หลายเดือนก่อน

      you can use the POT given on sensor module to tune it accordingly with the distance u want sensor to detect

  • @coachtusharraut
    @coachtusharraut 3 ปีที่แล้ว +1

    Good one. Thanks.

  • @romeoromejr7501
    @romeoromejr7501 2 ปีที่แล้ว

    i suggest that this project is design for indoor only if you use for outdoor its not siutable bcoz its detect the sunlight and they will activate it connot turn off or on or vice versa.

  • @eXtremeFX2010
    @eXtremeFX2010 4 ปีที่แล้ว

    I only purchased the IR Sensors for a project avoidance. Do I also need to go back and purchase an aduino board to reprogram them as well?

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว

      For controlling any sensor you need a Arduino. Without Arduino you can't get your desired output

    • @eXtremeFX2010
      @eXtremeFX2010 4 ปีที่แล้ว

      @@bongtechguide3732 Thank You...I went ahead and ordered it from Amazon. Is the software free and easy to install?

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว

      Yes..just go Arduino.cc and download the software

  • @2.2mviews70
    @2.2mviews70 3 ปีที่แล้ว

    Can we ON sensor for particular time?
    Pls reply
    Btw, nice video keep doing❤️❤️❤️

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว +1

      You need to use delay otherwise you need to make Real Time Operating system for your microcontroller for ON your sensor for a particular time

  • @phoenixplays0702
    @phoenixplays0702 2 ปีที่แล้ว

    All is good but in my project the led in arduino will continuously blow even if obstacle is not there is there any solution for this

  • @rotorway133
    @rotorway133 3 ปีที่แล้ว +1

    is it possible to have more range like a tv remote control ?

  • @nrityachanda3971
    @nrityachanda3971 4 ปีที่แล้ว

    Does the ir sensor work with adafruit motor shield? plz reply

  • @saffanhal-turki6522
    @saffanhal-turki6522 4 ปีที่แล้ว +1

    hi, i need help ;(
    Q: can i connect the IR sensor with dot matrix LED ? and what kind of code should i use

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว

      Yes ...You can use and you need to change little bit of this code

    • @saffanhal-turki6522
      @saffanhal-turki6522 4 ปีที่แล้ว

      @@bongtechguide3732 any hints on how,,?

    • @saffanhal-turki6522
      @saffanhal-turki6522 4 ปีที่แล้ว

      @@bongtechguide3732 you see ... my idea is when the sensor detects an object -> the lights turn on -> and also a mp3 sound plays.
      so i have these work separately not together, how can i connect them

  • @rajiraj-wx2ts
    @rajiraj-wx2ts 2 หลายเดือนก่อน

    Nice

  • @ProKamExplained
    @ProKamExplained 2 ปีที่แล้ว

    #Arduino #IR #sensor
    How to use an IR sensor with Arduino? | Arduino के साथ IR सेंसर का उपयोग कैसे करें | Simple Projects
    th-cam.com/video/NbdbgItDDk4/w-d-xo.html

  • @tafadzwagoreraza1547
    @tafadzwagoreraza1547 4 ปีที่แล้ว +1

    how do i use an ir sensor and an arduino to measure ph of liquids

    • @hatchman1640
      @hatchman1640 ปีที่แล้ว

      That's not what it's for, you would have to use a different sensor, this is only checking for the presence of an object.

  • @origami1871
    @origami1871 2 ปีที่แล้ว

    what is the range of ir sensor

  • @statusforever47
    @statusforever47 2 ปีที่แล้ว

    Instant of led shall we put speaker

  • @mazharameerpg0643
    @mazharameerpg0643 3 ปีที่แล้ว

    can we use buzzer with it to make like a alram

  • @Aryan_dabhade
    @Aryan_dabhade 4 หลายเดือนก่อน

    Hi how can I connect speaker with it and also code

  • @chanchaljaiswal3162
    @chanchaljaiswal3162 3 ปีที่แล้ว +1

    Sir can you please make a upside down coding
    Means when we put our hand infront of IR sensor, then the light should turn off and when we remove our hand the light should turn on

  • @sumanthjadala
    @sumanthjadala 2 ปีที่แล้ว +1

    how much minimum distance from the obstacle and IR sensor , to detect the object ?

    • @hatchman1640
      @hatchman1640 ปีที่แล้ว

      turn the potentiometer with a screw driver to adjust the sensitivity and thus the distance

  • @sayedmariya9636
    @sayedmariya9636 2 ปีที่แล้ว

    He'llo sir I have a doubt that can we use this sensor for counting our heart beat?? I want to know what should be the working that led will glow if I put finger on IR sensor??

    • @bongtechguide3732
      @bongtechguide3732  2 ปีที่แล้ว

      Yes you can use ir sensor for measure your heart beat but you need to write more complex code for this.

  • @luqkiiim
    @luqkiiim 2 ปีที่แล้ว +5

    Hi, really helpful video. How far can the IR Sensor detect obstacles?

    • @hatchman1640
      @hatchman1640 ปีที่แล้ว +3

      Set the distance by turning the potentiometer, that adjusts the sensitivity and thus the distance required

    • @user-mo1dq9vo9e
      @user-mo1dq9vo9e ปีที่แล้ว

      @@hatchman1640 what is a potentiometer ? and how can i do this exactly?

    • @person_83049
      @person_83049 9 หลายเดือนก่อน

      It’s like a screw u can find on the senor adjust it using a screwdriver

  • @muhammadnuryassin9033
    @muhammadnuryassin9033 8 หลายเดือนก่อน

    Question, how to make the led light turns green when sensor don't sense anything and if it sense something it will turn red?

    • @navyaad7826
      @navyaad7826 2 หลายเดือนก่อน

      same

  • @techtamilan893
    @techtamilan893 3 ปีที่แล้ว +1

    this is so usful for me

  • @chandrasekharraghumanda9716
    @chandrasekharraghumanda9716 2 ปีที่แล้ว +1

    sir can the control pin of ir sensor can be connected to analog pin

  • @manishshaw3862
    @manishshaw3862 ปีที่แล้ว

    Thanks Brother

  • @rajput2477
    @rajput2477 2 ปีที่แล้ว

    Can we use this with remote ?

  • @subramanyamn
    @subramanyamn 3 ปีที่แล้ว +1

    What is the current drawn when it is sensing?

  • @asgamezz4192
    @asgamezz4192 2 ปีที่แล้ว

    Instant of led glow shall we connect their speaker and it will sound plzz send this code

  • @peepopray7214
    @peepopray7214 3 ปีที่แล้ว

    what software do you use to code and put the command inside the arduino.

  • @akimbofennec5368
    @akimbofennec5368 ปีที่แล้ว

    Thanks bro

  • @santhoshboopathi651
    @santhoshboopathi651 3 ปีที่แล้ว +1

    Does IR sensor sense the transparent plastic bottle?

  • @pamindudineth5258
    @pamindudineth5258 2 ปีที่แล้ว

    good

  • @Mukeshmyson
    @Mukeshmyson 3 ปีที่แล้ว +5

    sir please can you give me the code for two IR sensors please

    • @RiteekMeher
      @RiteekMeher 3 ปีที่แล้ว

      Bro did you get the code?? Please reply me ASAP

  • @patrickalerta2623
    @patrickalerta2623 ปีที่แล้ว

    why is my led always lights without the sensor detecting anything?

  • @noobdevloper8177
    @noobdevloper8177 ปีที่แล้ว +1

    hello actually my ir sensor's light is always glowing and the buzzer(I used buzzer instead of light) sound is also coming always when I connect what should I do I tried moving that screw with screwdriver but its not really working

  • @anupprasad1342
    @anupprasad1342 3 ปีที่แล้ว

    Sir would you help me to connect relay modules IR sensor and ardrino..

  • @suvajitghosh7557
    @suvajitghosh7557 ปีที่แล้ว +2

    How to connect arduino board in computer and how connect coding part in arduino

    • @user-fm3en4xh3k
      @user-fm3en4xh3k 6 หลายเดือนก่อน

      U can use usb-b cable

  • @rahulreddy3038
    @rahulreddy3038 3 ปีที่แล้ว

    Broo you made ur own coding?? Or given in the examples??

  • @ilhammiranto5974
    @ilhammiranto5974 3 ปีที่แล้ว +1

    Make tutorial with time(Delay) if IR detected object lamp on for 1 minute and will off. Can u make that ? because i need that

  • @kunalghosh4334
    @kunalghosh4334 ปีที่แล้ว

    Dada, where to buy the components of any this type of project online or offline where is cheap ?
    If offline where from to buy and where online ?

    • @bongtechguide3732
      @bongtechguide3732  ปีที่แล้ว +1

      Go for offline market, chadni market is best.

  • @RPI_Arduinotronics
    @RPI_Arduinotronics 3 ปีที่แล้ว

    Thank you so much, I thought my sensor didn't work by seeing another videos

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว +1

      Please subscribe to my channel.. and share this video with your friends

    • @RPI_Arduinotronics
      @RPI_Arduinotronics 3 ปีที่แล้ว

      @@bongtechguide3732 Ok I will but you should also subscribe to my channel.. and share my TH-cam channel with your friends

    • @RPI_Arduinotronics
      @RPI_Arduinotronics 3 ปีที่แล้ว

      did you get an other subscriber

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว +1

      ok..no problem

  • @mayankrajpootEE
    @mayankrajpootEE ปีที่แล้ว

    how to delay only the off time of led and
    On time of led should be fast

  • @mohammedbaageil5459
    @mohammedbaageil5459 4 ปีที่แล้ว

    can we connect screen with arduino and IR sensor ?
    this screen give the sentens when IR sensor work .

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว

      yeah..you can connect Arduino ir sensor and display...Check my video list there is a video on display with arduino. After if u not understand then comment me again.

    • @mohammedbaageil5459
      @mohammedbaageil5459 4 ปีที่แล้ว

      Tech Guide, Okay thanks my friend i will check in next two days and will tell u the result.

  • @tanmayurane7888
    @tanmayurane7888 4 ปีที่แล้ว

    Sir i want to interface a 9v dc motor with a relay with ir sensor to despense water for 2 to 3 seconds

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว

      just check this video th-cam.com/video/reWHDiVle9w/w-d-xo.html

    • @halaboly8915
      @halaboly8915 4 ปีที่แล้ว

      That's literally like my project xD

  • @15SAJAN
    @15SAJAN 3 ปีที่แล้ว

    Thanks Bro

  • @fahimmontasir2083
    @fahimmontasir2083 11 หลายเดือนก่อน

    does it work same as the PIR?

  • @theglowingsisters7178
    @theglowingsisters7178 ปีที่แล้ว

    Can we use ir sensor to detect potholes

    • @bongtechguide3732
      @bongtechguide3732  ปีที่แล้ว

      If potholes are black colour then only IR sensor can detect otherwise you need to go with Ultrasonic sensor

  • @keshavkakde1034
    @keshavkakde1034 3 ปีที่แล้ว +1

    Sir can we place motor in place of led

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว +1

      Yes..you need to use a motor driver or relay..

  • @Sarthkapale-piano
    @Sarthkapale-piano 3 ปีที่แล้ว

    Thanks pro bro

  • @timlo8934
    @timlo8934 ปีที่แล้ว

    hello, can i replace the light bulb with a motor instead?

    • @poweritup2
      @poweritup2 11 หลายเดือนก่อน

      yes u can but see the voltage requirement

  • @shandinesh4925
    @shandinesh4925 2 ปีที่แล้ว +1

    Can i control the motor in one direction by the same way??

    • @bongtechguide3732
      @bongtechguide3732  2 ปีที่แล้ว +3

      For controlling a motor You need to use l298 motor driver.

    • @shandinesh4925
      @shandinesh4925 2 ปีที่แล้ว

      @@bongtechguide3732 ok tq

  • @pavanibhanuchandramurthy539
    @pavanibhanuchandramurthy539 4 ปีที่แล้ว

    INSTEAD OF LED,Can i put motar here,that is D.C,5 VOLTS TO 12 VOLTS....
    Purpose of this is accidents prevention in drunk and drive cases....?

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว

      Yes you can ...but you need a motor driver to drive the motor

  • @puspenghosh4100
    @puspenghosh4100 4 ปีที่แล้ว

    How I measure wind speed with the help of IRsensor

    • @bongtechguide3732
      @bongtechguide3732  4 ปีที่แล้ว +1

      you can use IR sensor but better if you use hall sensor in place of IR sensor then it will better.. I will definitely make a video on motion detecting using hall sensor...So pls stay tuned with my channel

  • @rudhradileep1186
    @rudhradileep1186 3 ปีที่แล้ว

    Thank you

  • @samarthdeshmukh193
    @samarthdeshmukh193 3 ปีที่แล้ว

    Hi, In my IR sensor the led is remaining on if there is no obstacle infront of it and turns off when obstacle is placed how can I invert its output ?

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      You need apply invert logic in your code...and go to description the full code is there

    • @samarthdeshmukh193
      @samarthdeshmukh193 3 ปีที่แล้ว

      @@bongtechguide3732 So should I make all High - Low and all Low - High ?

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      Yes...First apply the code which is given

    • @samarthdeshmukh193
      @samarthdeshmukh193 3 ปีที่แล้ว

      @@bongtechguide3732 got it. Thanks brother.

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      Please subscribe to my channel for more videos

  • @farseenbasheer1928
    @farseenbasheer1928 3 ปีที่แล้ว

    Can we use any microcontroller to control ir sensor..if yes..which microcontroller...and when it sense the obstacle,can we send a signal to a camera module to take a picture..

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      Yes you can use any microcontroller for controlling IR sensor. And you can also use camera with microcontroller

    • @farseenbasheer1928
      @farseenbasheer1928 3 ปีที่แล้ว

      @@bongtechguide3732 i want to do a project in which after sensing an obstacle,a picture should be taken by camera module.how can this be implemented??

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      When Ir sensor is low then you turn on your camera on that time and take the picture

    • @farseenbasheer1928
      @farseenbasheer1928 3 ปีที่แล้ว

      @@bongtechguide3732 thank you tech guide..for fast and apt reply

    • @farseenbasheer1928
      @farseenbasheer1928 3 ปีที่แล้ว

      @@bongtechguide3732 which camera can be used which can be connected to both microcontroller and pc at the same time

  • @rishiranjan4646
    @rishiranjan4646 4 ปีที่แล้ว

    i want to make automatic sanatization dispenser using IR sensor can u help me

  • @ISNLFN
    @ISNLFN ปีที่แล้ว

    How to show signal on serial monitor

  • @soumickkarmakar1998
    @soumickkarmakar1998 5 ปีที่แล้ว +1

    Sir amader bujhte kono problem hoyeni, amra ebar Xm e toh 100/100 pabo.

  • @KSM963
    @KSM963 3 ปีที่แล้ว +1

    I got a problem in Arduino Uno compilation error

  • @sunilprasad4463
    @sunilprasad4463 3 ปีที่แล้ว

    How to blink 3 second when object come to front of ir sensor and after 3second led off atomatic

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      You need to use a delay function after your led blinking statement

  • @om25396
    @om25396 2 ปีที่แล้ว

    Can we use ir sensor for counting seed (small size)???

  • @arjun._.3581
    @arjun._.3581 3 ปีที่แล้ว

    Could u measure the distance between the it and the obstacle

    • @bongtechguide3732
      @bongtechguide3732  3 ปีที่แล้ว

      We can't measure the distance using ir sensor

  • @manthankarale1904
    @manthankarale1904 3 ปีที่แล้ว

    And also how to calibrate the distance of that IR sensor

    • @hatchman1640
      @hatchman1640 ปีที่แล้ว

      Turn the potentiometer with a screwdriver