How||Genuine Toyota Door Sill Installation

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 มิ.ย. 2017
  • ▌↓▌↓▌↓▌↓▌↓▌ LINKS IN THE DESCRIPTION ▌↓▌↓▌↓▌↓▌↓▌↓▌↓▌
    I installed factory Toyota Camry door sills for a 2013 XLE model.
    ►Song: In The Field
    ►Song: Heroica
    ►Door Sills: www.amazon.com/gp/product/B00...
    ►Instructions: cdn.shopify.com/s/files/1/0176...
    ► Follow me on Twitch: / infl3gacy
    ►Follow me on Twitter: / infl3gacy
    ►Best comment will be pinned to the top!
    If you're reading this, thank you very much for watching. Here's a question for you: What do you think of the way I installed it? What would you do different?
  • ยานยนต์และพาหนะ

ความคิดเห็น • 66

  • @christopherhinchee2473
    @christopherhinchee2473 5 ปีที่แล้ว

    Thanks for the video man. Used your advise on pulling the fuse in the engine compartment instead of disconnecting the battery, and used your advise on color matching the wires in the door light bulb to the color in the harness. Your video, plus the written instructions worked like a charm for a painless installation. Thanks again man.

  • @darktatsu2894
    @darktatsu2894 4 ปีที่แล้ว +6

    Dangit! I need a video like this for my 2020 camry

  • @huy302
    @huy302 7 ปีที่แล้ว

    really helpful
    thanks alot :)

  • @PatRay43
    @PatRay43 5 ปีที่แล้ว +6

    How do you attach wires to power on 2018 camry se

  • @debfurey6364
    @debfurey6364 2 ปีที่แล้ว +2

    Show how to splice the wires, please

  • @frsh1067
    @frsh1067 7 ปีที่แล้ว +1

    Try to install 6 led door sills for Toyota Sienna need some help. Thanks!

  • @popaki9484
    @popaki9484 4 ปีที่แล้ว

    Nice job! question I see you have the door edge guards installed. Can I ask you...is there a rubber gasket where the drivers door closes and meets the front of the back door? Thanks

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  4 ปีที่แล้ว

      Hello, No there is not. Each door has it's own seal surrounding the corresponding opening, hope that helps!

  • @dinhqtrung
    @dinhqtrung 5 ปีที่แล้ว

    Hi my friend, I have a Toyota Corolla 2017 SE and I need your help where I can find the cables for me to connect the door sill.

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  5 ปีที่แล้ว

      Hello, So I did some research for your vehicle and found the instructions on installing the door sill to your vehicle. Hope this helps! Here is the link to the manual: www.google.com/url?sa=t&source=web&rct=j&url=www.toyotapartsdeal.com/resources/installation/TPD/18_my17%2520corolla%2520illuminated%2520door%2520sills-dio%2520issa.pdf&ved=2ahUKEwjY1vmn9pDgAhUrwVQKHRMzDMQQFjACegQIAhAB&usg=AOvVaw33HLxvexRHV6mcdmHyjdQg

  • @icomba
    @icomba 4 ปีที่แล้ว

    The ones i have got a power wire and a ground wire not just 1power wire and all 4 of the sills lite up

  • @Miky0515
    @Miky0515 5 ปีที่แล้ว

    Where I can get the lights?

  • @marcusmoultrie4200
    @marcusmoultrie4200 5 ปีที่แล้ว +1

    Help...
    I have a 2018 Camry... I have installed my illuminated door sill and it works until I press the unlock button for my door...
    Once do that, the door sill stop illuminating...
    What did I do incorrectly???

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  5 ปีที่แล้ว

      Hello, The only thing that I can think of is that you have connected the input power of the door sills to the wrong wire of the vehicle. The wire you have spliced to could be a wire to the lights of your switches or dash accent lights and so on. These lights might turn off when you unlock your vehicle or lock it. Try to look at the paper instructions for your specific vehicle by searching the pdf online as I haven't installed these on a 2018 Camry I am unsure as to which wire it might be. Hope that helps!

    • @icomba
      @icomba 4 ปีที่แล้ว

      I found it to be a black wire on the driverside and a pinkish/tanish wire on the passenger side. I have a 2019 camry se

  • @swgalley
    @swgalley 4 ปีที่แล้ว +1

    i got the factory instructions and got strange beeping when i touch the door handle of my 2017 avalon. the colors matched up with your method and the factories so i am at a loss for a solution. i have only done the drivers side so that is my only thing i can think is it is unbalanced.

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  4 ปีที่แล้ว

      No you shouldn't have issues if you have only done one side. Maybe a wrong wire was tapped? Did you try to trace the wires to the correct lights? Also try to trace the beeping if possible, what is beeping? Let me know if anything helps.

    • @swgalley
      @swgalley 4 ปีที่แล้ว

      I think the beeping was...I did not plug it back in...I went to the passenger side and found that the factory colors did not match up, so I followed your advice by looking for the colors of the door courtesy light. They were in another plug, so I connected to those. - Success. I then went back to the driver’s side and realized that I had not plugged it in, so I did, and everything checked out. Thanks for the guidance, it was good having another sage advice to go along with the factory instructions.

  • @jigendaisuke
    @jigendaisuke 4 ปีที่แล้ว

    the video showed passenger side wiring installation , is it the same in the driver's side?

  • @samweber2571
    @samweber2571 2 ปีที่แล้ว

    Trying to do this on a Land Cruiser 200. I know the trick for finding right wires but the colors aren’t the same. What tool do I use to test the voltage when I open and close the door?

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  2 ปีที่แล้ว

      Hello! You can try to use a multimeter (Voltage Reader) and then find the switch that the door pushes on when closing and test the voltage without actually closing the door but rather just pressing the switch by hand on and off so you can see the voltage fluctuate indicating that the wire truly is dependent on status of the door, whether ot is open or closed. Hope that helps!

    • @samweber2571
      @samweber2571 2 ปีที่แล้ว

      @@INFL3GACYOFFICIAL totally makes sense! But where do the leads on my multi meter attach to?

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  2 ปีที่แล้ว

      You can prong the different connectors where they connect in the fuse box and then trace the cable to where you want to splice. Hope that helps!

  • @calixxlivin
    @calixxlivin 5 ปีที่แล้ว

    is there one for a 2012 camry se? or that model fits it??

    • @autogadgets4622
      @autogadgets4622 5 ปีที่แล้ว

      Check out this one th-cam.com/video/3ONf6sCyndk/w-d-xo.html

  • @zemgineer9693
    @zemgineer9693 ปีที่แล้ว

    Whats the piece called that you used to hide the wiring , the clips on that broke on mine

    • @Yonkers1978
      @Yonkers1978 หลายเดือนก่อน

      Mine too I’ve been searching all over

  • @hishams.abdul-aziz7700
    @hishams.abdul-aziz7700 ปีที่แล้ว

    soooo the 2014 Camry rear door sills don't light up like the front and passenger side front????

    • @Dan-oi4kt
      @Dan-oi4kt 2 หลายเดือนก่อน

      Nope

  • @lmunos420
    @lmunos420 7 ปีที่แล้ว +1

    The sills on the back don't light up?

    • @KeithsTVHD1
      @KeithsTVHD1 6 ปีที่แล้ว

      but still looks better than the plain black stock ones

    • @swgalley
      @swgalley 4 ปีที่แล้ว

      Yes, the sills in back do not light, but I also agree, they look better than the originals.

  • @johnkosheluk1041
    @johnkosheluk1041 5 ปีที่แล้ว

    Do that make them for a Hyundai elantra 2018

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  5 ปีที่แล้ว

      I am not sure as I did not do any research for another vehicle but you can search on Amazon or Ebay to see if they do sell OEM or aftermarket designs.

  • @killerbreadsticks
    @killerbreadsticks 7 หลายเดือนก่อน

    Dude cuts out the hardest part of the video

  • @ndenkha
    @ndenkha 5 ปีที่แล้ว

    The rear ones don't iluminate?

    • @autogadgets4622
      @autogadgets4622 5 ปีที่แล้ว

      You should checkout these if you want all 4 doors light up. th-cam.com/video/3ONf6sCyndk/w-d-xo.html

  • @TacomaRAV4Lover
    @TacomaRAV4Lover 4 ปีที่แล้ว

    How about 2019 Toyota RAV4 installation. Can i buy that on amazon too?

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  4 ปีที่แล้ว

      yes you should be able to as long as you have the correct part number that belongs to your vehicle. i.e. call your local dealer to point you in the correct direction for your vehicle. Hope that helps.

    • @TacomaRAV4Lover
      @TacomaRAV4Lover 4 ปีที่แล้ว

      @@INFL3GACYOFFICIAL i saw a video on youtube regarding 2019 RAV4. But he could not find the connection where the door lights turns on/off. He connected it somewhere that it will turn on the lights and won't turn OFF when the engine is on and it will only turns off when the engine is off. Any idea where to find the right wiring for the 2019 RAV4 so that the LED light will turn on ONLY when the doors are open and turns off when the doors are closed? Thanks so much.

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  4 ปีที่แล้ว +1

      You need to always connect the sills to the wires that power the light on the door. You can locate this with the method I showed in the video by taking that specific door light out and checking the colors of the wire, then check the voltages as the door closes and opens. This will determine whether or not those are the correct wires. Hope that helps.

    • @skajsen
      @skajsen 3 ปีที่แล้ว

      @@INFL3GACYOFFICIAL the 2019 Rav4 does not have door lights 😕

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  3 ปีที่แล้ว +1

      I see, you can locate any lights in the car that power on when the door opens, or any location there is power when the door opens. This is the best solution if the car has no courtesy lights whatsoever on the door. Hope that helps!

  • @vpatel
    @vpatel 3 ปีที่แล้ว

    would this work on a 2008 XLE model?

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  3 ปีที่แล้ว

      Yes. The concept is the same as far as the installation goes but the sills themselves would be different than these ones so you would have to look for the ones made for your vehicle. Hope that helps!

    • @vpatel
      @vpatel 3 ปีที่แล้ว

      @@INFL3GACYOFFICIAL thank you. I appreciate you responding fast af

  • @Chriswane0523
    @Chriswane0523 6 ปีที่แล้ว

    i got camry 2016 also and how can i install the light at back seat

    • @autogadgets4622
      @autogadgets4622 5 ปีที่แล้ว

      checkout this one. th-cam.com/video/3ONf6sCyndk/w-d-xo.html

  • @pjpern
    @pjpern 5 ปีที่แล้ว

    Do you have instructions for Toyota Alphard 2003 please?

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  5 ปีที่แล้ว +1

      unfortunately I do not. Maybe you can try and ask your local Toyota dealer.

  • @hishams.abdul-aziz7700
    @hishams.abdul-aziz7700 ปีที่แล้ว

    do the rear door 2014 camry sills light up as well??

    • @veedub1963
      @veedub1963 ปีที่แล้ว +1

      No. The rear sills are not Illuminated.

    • @hishams.abdul-aziz7700
      @hishams.abdul-aziz7700 ปีที่แล้ว

      @veedub1963 so only the front driver and passenger drivers sills light up? saying camry not the back ones???

    • @hishams.abdul-aziz7700
      @hishams.abdul-aziz7700 ปีที่แล้ว

      🗣 @veedub1963 damn that's wack I wish the back rear door sills light up like the fronts doo!!!💯🤦🏿‍♂️✌🏿

  • @icomba
    @icomba 4 ปีที่แล้ว

    U never said what that wire goes to?

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  4 ปีที่แล้ว

      Which wire?

    • @icomba
      @icomba 4 ปีที่แล้ว

      -INFL3GACY- the wire u tapped into, does it go to the dome light, or another interior light?

    • @INFL3GACYOFFICIAL
      @INFL3GACYOFFICIAL  4 ปีที่แล้ว

      The wires I tapped go to the door courtesy lights.

  • @WillyPark
    @WillyPark 6 ปีที่แล้ว +7

    Splicing the wire is the hardest part and you deleted that step from the video, dislike.

  • @Dan-oi4kt
    @Dan-oi4kt 2 หลายเดือนก่อน

    They way they make it to wire those up is terrible. Has to be an easier way

  • @barrycarlson521
    @barrycarlson521 3 ปีที่แล้ว

    Weak that only the letters light up.

  • @tampabayroadcam2017
    @tampabayroadcam2017 10 หลายเดือนก่อน

    Should’ve just bought the higher trim xse premium or xle with it instead of buying all this aftermarket which does lower the value since it was installed after the factory.

    • @willhamilton9220
      @willhamilton9220 7 หลายเดือนก่อน

      he has the XLE. which is the top trim. XSE premium is not offered for 2013. it's an accessory, which can only be optioned if you ordered the car off the website and got it delivered. which most people dont do.

    • @tampabayroadcam2017
      @tampabayroadcam2017 7 หลายเดือนก่อน

      @@willhamilton9220 2012-2014.5 SE optional , SE LIMITED standard, XLE optional and XLE PREMIUM standard. 2015-2017 XSE optional, XSE PREMIUM standard, XLE optional and XLE PREMIUM standard. That’s for Camrys.
      My 2014 AVALON XSE LIMITED also had everything in it.

  • @hoozen8580
    @hoozen8580 4 ปีที่แล้ว

    Too much nonsense