Super instructional video RCGG! My son is making a bracket on his 3D printer that attaches to the roll cage bottom bolts for my GC 2 fan setup Can’t waiting to rest it out! Lol
Breaking NEWS: Cali fires definitely started by Li-Po wiring fail! I know a "GUY" who leaked the info. In other news, some "Guy" also invents a new RC Mincer, by mistake! HAHA! Seriously, loved the vid bro...
Great video man! I'm gonna get myself a bunch of these soon! Need 3 for my one xmaxx and game changer now make a package of 2 40mm and 1 50mm for the xlx2 1100kv combo which is awesome! Need 2 of those too lol 🍻
How long of a run time do you get from a Game Changer fan with that 1300mah battery? Also, does it have low voltage detection? Or will it kill batteries if left plugged in too long? Thank you.
Well at the time my finger being sliced open with no affect on the blade other than GINSU TYPE KNIFE feel . . . . YES I THOUGHT they were metal😂🤣😂🤣 but alas they are just a VERY STRONG plastic that doesn't seem break with all the CRASHING that I've recently been doing
In my opinion running the fan on a separate battery is for speed runs as you would want NOTHING else taking away power from the run. In regular runs just remember that after low voltage esc cut that the fan will be still pulling power from the battery
Just picked up 5 fans from AliExpress. Testing one on 4s in my outcast 4s. So far running strong on 4s. I'm coming straight off the esc battery lead! These are rated 7 volt to 13.8 volts! I think they can take 24 volts! They jus get under rated! I read on someone else's page,a guy has been running these fans for 2 years no problems😉
@@rcguygarage I'm seeing other fans not as tall just as powerful. No amp rating on them just a watt rating, .78, 1.72, 1.89! The higher the better! I'll be experimenting soon. I will keep all informed! Made my own adapter plate for the max 8 in my outcast 4s. About 15 $ for a 6'' × 12'' sheet of aluminum and 10$ for other stuff and about 3 hours and job done, No blood is a plus!
hey rc guy garage i bought those fans i got the 3 v1 fans for my losi dblx e 2.0, what is the best heatsink to link them together on my engine? need help plz thnx
Realistically, how much power are these going to take away from the battery one connected to the 3s Port as an example? I have a counter-rotating server fan I'm going to be installing on my motor or on top of the ESC with balance Port connector.
I’ve got the triple fan on order,,,can’t wait.....one thing though,,,you didn’t mention how the rear diff transformation is working out,,,does it work okay? 🇺🇸👈
I was wondering that very same thing you did, hooking up the fan to a 4S lipo. Have you ran into any issues running the fan on 4S? How long do you run your fans on 4S, before risking burning out the fan? I have some of those fans, and I've been itching to rum them on 4S.
Well Game changer fans are exactly that. Maybe if i had some of those on my Associated rc10's i wouldnt have sent the esc's into total meltdown, lol. Those thing on 4s have to be moving 500 cfm to the motors, at least.
RC Guy Garage yea i have seen the videos with you and Earl using these fans. Need to pick up a set of these fans. Yea you want to keep your fingers out the the fans
@@rcguygarage Late to the party just seeing these. I would like to put one in my Big Rock and Granite. Even if I can only get just one in just for the extra air....which one do you think I should get he sales a few different kinds?
Ok so i got a new battery a 5400mah 50c 2s lipo is it ok if paired with a 60a esc absolute noob here i just dont want to cook the power system cheers in advance
seems like the mic is on our right side atleast I heard a noticeable difference while using ear buds during the 2s to 3s comparison but that 4s test had me feeling like the guy in the old "maxell" commercial lol damn near blew me back off my chair! Thanks for the demo i will no doubt be picking up a couple diff configurations of these fans ASAP as they do seem to be exactly what I've been in search of after a coupld of cooked esc's/motors so far this summer. Glad I got to see these in action as I have been running yeah racing or power hobby dual fans which are ok but at the price point these "game changers" seem to be a no brainer for a few more dollars. Ill be sure not to install these during some late night installs in my draws when they arrive thats for sure😳
So if u run it on 3s do u connect the negative wire to the 3s cell ? Also if your not running a separate battery how much run time is sacrificed ? I have a Typhon and I’m not sure I can pack another battery under the body Sorry to be a pain. I’m brand new to the game
Does anyone know the external email contact of Game Changer RC staff? E-bay does not let us exchange contacts. They already have several cable options, I want to order an X cable with on / off switch. From Brazil.
I wish it came with screws instead of zip ties. Hey Guy have you tried that powerhobby duel fan? I put one on my kraton and its super powerful. A little pricey at 20$ but I like them. Edit: wow these are 55$? Check out the powerhobby that has duel fans and a heatsink for 20$ and really powerful.
Right but these are I'm thinking on a different level of cooling. Only one fan is being used. The $55 would be halved in that case to about $28 comes with screen zip ties and screws
@@rcguygarage Ah I see!! Yeah as I watched more they definitely seem really powerful! But at some point do try one of those powerhobby duel fans on one of your 6s trucks. It sounds like a plane lol. And I'll definitely try these out also. I like helping out smaller businesses. Thanks Guy
@@rcguygarage I see, so its just an option. I could just run the fan off the regular battery connectors too? Just want to be sure as I don't want to be a burn victim lol
Yes this is the direct link just to get you to his ebay. He has many to choose from. www.ebay.com/itm/New-CUSTOM-MADE-RC-GUY-GARAGE-Merica-Raw-GCRC-V1-dual-cooling-fans-/154055874302?_trksid=p2349624.m46890.l49292
Wellllll one of my units looks to have a metal sheen underneath🤣😂🤣😂 and my finger sure did Z think it was made from metal🤣😂🤣😂 either way the fan blades are extremely durable and no do not stick your finger in the blades
@@rcguygarage lol, i thought they were too , but I asked him , kinda reminds me i was a kid , uk how burn off excess zippo fluid , well nvr do with gasoline all going say
Did you know that these fans are just computer fans rebranded an you guys just keep trying to push game changer not cool my k8 has two plane Jane computer fans with their housings they came with an my motor runs at 1o7 30 min bash 6800 120c
TELL ME SOMEONE....ANYONE THAT USE LIPO BATTERIES AND DOESN'T KNOW WHY A 6S BALANCE CABLE HAS 1RED+6GROUND AND HOW TO PULL 2S/3S/ETC POWER(SOMEONE WITH A Y.T CHANEL NOT A KID) I HAVE A 3S 950Mah FOR MOTOR FANS! I'LL CHECK OUT THE AMOUNT OF OF MAH ON 3S ON EACH FAN IN CASE MY DBXLE V2 LIKES IT MORE! ALWAYS PREFER 3 GREAT UPGRATES THAN 5 GOOD ONES! GREAT VID AND NICE DAY! !
EITHER USE A 2S OR 3S BALANCE LEAD ON THE FAN CUT AT THE END TO PULL THE POWER NEEDED OR WIRE IN A 6S CONNECTOR AND WIRE FOR 2-3S DONT FORGET to take caps lock OFF as its harder to read a long sentence sometimes.
@@rcguygarage I USE BIG LETTERS ON MY CONSTRUCTIONS ENGINES/60cc WARBIRDS(WW2)/DIGITAL TELECOM CENTERS ETC I HAVE DBXLE 2 THAT MEANS 2X4S AND A 3S 950Mah(DON'T YOU RED THE 1ST MSG?) GREAT VID FOR THOSE WHO DON'T KNOW HOW TO MAKE A LIPO CABLE! IF EVERY FAN PULLS 12VX0.3 AMPS NOT WORTH IT AT 12 V 0.6-1 AMP THAT'S A REAL FAN...WILL SEE!
@@marioskalogeropoulos7054 Great but all Im saying here is that IT'S HARD TO READ YOUR COMMENTS that's it. Sounds like you have a good handle on things and electrical understanding. Wired either way you still pull power whether taking from red or black. I prefer red as it gives the user the sight of positive and negative normal wire setup.
RC Guy Garage much agreed as we have been in this hobby for many years. There are always people that do not have the knowledge or means on how to solder. It’s good to know that they can pre-wire the fans upon ordering.
Where do you get your connectors for the balance ports
Great work you and Earl Moorhead are amazing that’s why I keep watching you guys.👍👍👍
That is nice tip on cutting out ends of the balance leads, thanks.
Great video! Clear and concise 👏🏼
Such a great instructional video. Ive had a few questions about wiring my new game changer fans. And they have been answered
the entire time you were holding that fan I was cringing out thinking it was going to happen again live on video, PUT THE GUARD ON FFS LOL!!!
Just got these i the mail friday thanks to your first video on them super satisfied anyone thinking about it buy it they are worth the money 👍
Super instructional video RCGG! My son is making a bracket on his 3D printer that attaches to the roll cage bottom bolts for my GC 2 fan setup
Can’t waiting to rest it out! Lol
Depending on usage careful with 3d cause the repeated impact shock may delaminate the layers
Breaking NEWS: Cali fires definitely started by Li-Po wiring fail! I know a "GUY" who leaked the info. In other news, some "Guy" also invents a new RC Mincer, by mistake! HAHA!
Seriously, loved the vid bro...
THIS IS THE BEST COMMENT YET👍💯👊
Great video and really enjoying your channel just a shame you can't get those fans over here in the UK
Great video man! I'm gonna get myself a bunch of these soon! Need 3 for my one xmaxx and game changer now make a package of 2 40mm and 1 50mm for the xlx2 1100kv combo which is awesome! Need 2 of those too lol 🍻
Definitely getting 1 for my arrma senton having over heating issues.
This is what I do next in my kraton s6...Stay cool Baby🤘👍😁
Nice and simple...Like that...😲...😬
How long of a run time do you get from a Game Changer fan with that 1300mah battery?
Also, does it have low voltage detection? Or will it kill batteries if left plugged in too long?
Thank you.
Ha! Was just watching videos on fans and this popped up first!👊🏻just spent eighty something on fans🤦🏻♂️😜
Very nice fans. Great vid. 💯👍🏾
Great “How to”. Thanks
So these fans have to be run off a direct battery and not the esc?
yep
Nice video. You say metal fan blades? Are you sure??
Well at the time my finger being sliced open with no affect on the blade other than GINSU TYPE KNIFE feel . . . . YES I THOUGHT they were metal😂🤣😂🤣 but alas they are just a VERY STRONG plastic that doesn't seem break with all the CRASHING that I've recently been doing
Quick question
Can I run a 12v 0.6A rated cooling fan on a 12.6v 12A power supply or will it smoke up?
Theoretically yes cause the fan will only draw 0.6 amp from a supply of 12
@@rcguygarage thanks for the reply, but will that 0.6v extra coming from the power supply do any harm?
@@Lunarpollo5622 okay so you should NEVER EXCEED any ratings BUT from my experience it should be fine. But I cannot claim responsibility😉🤣😂
@@rcguygarage alright thanks
Looks good love the hat fan patent pending LoL 🤜🏻🤛🏻
Do u need a separate battery for the fan or is it juzt this one cause its a beast
In my opinion running the fan on a separate battery is for speed runs as you would want NOTHING else taking away power from the run. In regular runs just remember that after low voltage esc cut that the fan will be still pulling power from the battery
@@rcguygarage ok no worries cheers for the fast reply
Nice video they are some strong fans
VERY STRONG
Can you plug the wires into the balance lead like that and tape it up or is just best to get an adapter?
He sells them complete with plug now
Just picked up 5 fans from AliExpress. Testing one on 4s in my outcast 4s. So far running strong on 4s. I'm coming straight off the esc battery lead! These are rated 7 volt to 13.8 volts!
I think they can take 24 volts! They jus get under rated! I read on someone else's page,a guy has been running these fans for 2 years no problems😉
Wow that's great you found an option to run with👍
@@rcguygarage morning sir! Check out hardcore rc less than 5$ per fan!
@@rcjunkie260 right👍 I've seen them for sure. Always good to have options. There's lots out there💯
@@rcguygarage I'm seeing other fans not as tall just as powerful. No amp rating on them just a watt rating, .78, 1.72, 1.89! The higher the better! I'll be experimenting soon. I will keep all informed!
Made my own adapter plate for the max 8 in my outcast 4s. About 15 $ for a 6'' × 12'' sheet of aluminum and 10$ for other stuff and about 3 hours and job done, No blood is a plus!
@@rcjunkie260 right loss of blood is VERY BAD🤣🤪🤣🤪
I paid for that..... with blood man🤣 Just subbed man!
hey rc guy garage i bought those fans i got the 3 v1 fans for my losi dblx e 2.0, what is the best heatsink to link them together on my engine? need help plz thnx
If not a GOLIATH then I'd use ZIPPIE TIES and double stick tape and or some kind of 3M DUAL-LOCK with ZIP TIE. Possibly strap down to chassis
I normally don't use heat sinks
What does game changer offer for the hobbywing 800kv and 1100kv motors? Heat sinks and fans?
www.ebay.com/itm/GCRC-present-the-all-new-GOLIATH-V2-RC-cooling-fan-LIMITED-QUANTITIES-/154157822071?_trksid=p2349624.m46890.l49286
www.ebay.com/itm/GCRC-Dual-V2-Power-Glides-RC-extreme-cooling-fans-/154107318135?_trksid=p2349624.m46890.l49286
It's ALWAYS best to contact the seller with these questions as lots has changed since this older video
Realistically, how much power are these going to take away from the battery one connected to the 3s Port as an example? I have a counter-rotating server fan I'm going to be installing on my motor or on top of the ESC with balance Port connector.
Good option. So many fans to choose from.
@@rcguygarage what about power draw if not using a separate batter for the fans?
I’ve got the triple fan on order,,,can’t wait.....one thing though,,,you didn’t mention how the rear diff transformation is working out,,,does it work okay? 🇺🇸👈
To be CONTINUED . . . .
LMFAO made it to the end of the video! WE NEED 16s Fan Hats stepping the game up!
😂🤣
Great video, considering doing this soon. Curious if it unbalances batteries if you run the fan on 3s off a 4s battery? Cheers.
I dont believe Ive notice an appreciable difference as its pulling power from two packs possibly balancing the discharge.
@@rcguygarage thanks for the speedy reply
I was wondering that very same thing you did, hooking up the fan to a 4S lipo. Have you ran into any issues running the fan on 4S? How long do you run your fans on 4S, before risking burning out the fan? I have some of those fans, and I've been itching to rum them on 4S.
If you run anything beyond what the seller specs the fan to be you run the risk. I run mine @4s but I'm taking that risk knowing that. Runs mint
Well Game changer fans are exactly that. Maybe if i had some of those on my Associated rc10's i wouldnt have sent the esc's into total meltdown, lol. Those thing on 4s have to be moving 500 cfm to the motors, at least.
Do you know where we can get these fans? The link does not work anymore.
This will get you there www.ebay.com/itm/154055874302
I have a losi dbxl-e 2.0, will one of those fans be enough for the motor or should I use two?
One of his NEW ones will be sufficient. But all you have to do is message him and he'll recommend.
I can connect a fan with a receiver channel , e.g. on-off ?
excellen tvideo great information, i just ordered the earl moorhead 3 fan setup and the blue heatsink gonna do 2 motor and one on esc more than likley
NICE👍💯👊
Nice looking fans. Great video🔥🔥🔥
These fans RIP . . . Yes they'll RIP your finger off too. Very powerful
RC Guy Garage yea i have seen the videos with you and Earl using these fans. Need to pick up a set of these fans. Yea you want to keep your fingers out the the fans
@@rcguygarage Late to the party just seeing these. I would like to put one in my Big Rock and Granite. Even if I can only get just one in just for the extra air....which one do you think I should get he sales a few different kinds?
@@ParcoUpchurch v2 fans but contact him through message and ask as he is the best source to get you the right version for your rc
Doesn’t this ‘unbalance’ your 6S pack - or will it self balance through the balance lead?
Overall it self balanced as it only draws from the balance port while real power is drawn from the main leads for running
Bad ass fans
Hm idk if them fan blades would be all metal I’ve never seen an induction blade made of metal unless it’s fuel powered
Where'd u get that heat wrap set
amzn.to/3jLwLxH
Ok so i got a new battery a 5400mah 50c 2s lipo is it ok if paired with a 60a esc absolute noob here i just dont want to cook the power system cheers in advance
Is that durable/reliable? All these fans are intended for static use on servers not for mounting them into a car that goes through hell haha
is this GCRC Version1 or Version2 fan?
This is version 1
seems like the mic is on our right side atleast I heard a noticeable difference while using ear buds during the 2s to 3s comparison but that 4s test had me feeling like the guy in the old "maxell" commercial lol damn near blew me back off my chair! Thanks for the demo i will no doubt be picking up a couple diff configurations of these fans ASAP as they do seem to be exactly what I've been in search of after a coupld of cooked esc's/motors so far this summer. Glad I got to see these in action as I have been running yeah racing or power hobby dual fans which are ok but at the price point these "game changers" seem to be a no brainer for a few more dollars. Ill be sure not to install these during some late night installs in my draws when they arrive thats for sure😳
Your screw fit use a drill to put it in the MMX8s
POWAH impact drill it home 4 inch lag bolts???
RC Guy Garage yes drill in perfect 👌💪💪
So if u run it on 3s do u connect the negative wire to the 3s cell ?
Also if your not running a separate battery how much run time is sacrificed ? I have a Typhon and I’m not sure I can pack another battery under the body
Sorry to be a pain. I’m brand new to the game
Just seeing this today sorry. You probably already have your answer by now
@@rcguygarage just the two positive and neg correct? For 3s
Unknown what your asking or seeing😂🤣
Id like to say somthing iv never had problems with brushless motors having problems when they over heat i get them hot as hell and still they run fine
My race motors used to UNSOLDER themselves
U ain't running them hard enough then. Lol.
I would love to have that dr10
Does anyone know the external email contact of Game Changer RC staff? E-bay does not let us exchange contacts. They already have several cable options, I want to order an X cable with on / off switch. From Brazil.
Can you mount those on a traxxas maxx ?
YES
Ordered 2 soon as I saw this lol
Where can I get this set up
Game Changer RC on eBay
Is that a good fan for Traxxas Maxx
30x30x28mm need to run 2s-3s power source
Bonjour de France 🤟😉🤟👍
I wish it came with screws instead of zip ties. Hey Guy have you tried that powerhobby duel fan? I put one on my kraton and its super powerful. A little pricey at 20$ but I like them. Edit: wow these are 55$? Check out the powerhobby that has duel fans and a heatsink for 20$ and really powerful.
Right but these are I'm thinking on a different level of cooling. Only one fan is being used. The $55 would be halved in that case to about $28 comes with screen zip ties and screws
@@rcguygarage Ah I see!! Yeah as I watched more they definitely seem really powerful! But at some point do try one of those powerhobby duel fans on one of your 6s trucks. It sounds like a plane lol. And I'll definitely try these out also. I like helping out smaller businesses. Thanks Guy
@@cwatson42785 👍💯sameway
So the fans run off the balance port?
Yes but this is all dependent upon the individual need of the user.
@@rcguygarage I see, so its just an option. I could just run the fan off the regular battery connectors too? Just want to be sure as I don't want to be a burn victim lol
@@JimmyKay1976it's best to contact the seller to figure options available as some of the fan setups are custom.
You absolutely know what to do just keep yur fingers out 😱
RIGHT😂🤣😂🤣MY fingers are blade shy now😂
I will try these fans. So u don't run them to the esc. I have alot r c. I will get these fans soon.
Can i just tap in to the balance on battery to 4 s
Yes you can because it's still only going to pull 3s power but you have to cut the plug or get the appropriate adapter from game changer
Guy stick a carrot 🥕 In the blade for a demonstration! 😂
YOU TYING TO GIVE ME FLASHBACKS😂🤣
@@rcguygarage 😂😂😂🤣 ✂️ ✂️
The link for the fans won't work.
www.ebay.com/itm/154055874302
This link will get you to his eBay
@@rcguygarage thank you sir.
New York?
No he's out of Florida
Could make hovercraft with those fans 🤔
LOTS OF THEM
Shoot I have the swamp boat , and these definitely would help assist keeping off ground , maybe one in front one back, just seal into the hull
Are these still available?
Yes this is the direct link just to get you to his ebay. He has many to choose from. www.ebay.com/itm/New-CUSTOM-MADE-RC-GUY-GARAGE-Merica-Raw-GCRC-V1-dual-cooling-fans-/154055874302?_trksid=p2349624.m46890.l49292
@@rcguygarage Awsome thanks
West coast rules
2 of those wide open should make your car lighter lol
They are strong blades but not metal , i think he coats with epoxy paint
Wellllll one of my units looks to have a metal sheen underneath🤣😂🤣😂 and my finger sure did Z think it was made from metal🤣😂🤣😂 either way the fan blades are extremely durable and no do not stick your finger in the blades
@@rcguygarage lol, i thought they were too , but I asked him , kinda reminds me i was a kid , uk how burn off excess zippo fluid , well nvr do with gasoline all going say
The fans are amazing but far from reasonably priced coming in at $130 Canadian delivered.. 😊 🤪😜😎
Right CANADA MARKUP always killing the costs🤬
Just costs us 30% more for everything!.. my Felony ended up being $1024 with taxes and delivery!😥😥😥
Painted metal.... Not real metal
Right but my finger said CHOPPING BLADES
Dudes not selling on eBay anymore. 🤷♂️
Did you know that these fans are just computer fans rebranded an you guys just keep trying to push game changer not cool my k8 has two plane Jane computer fans with their housings they came with an my motor runs at 1o7 30 min bash 6800 120c
Yes obviously 👍💯 did you know that a little more goes into what he sells. Yes they do cool🤣😂
TELL ME SOMEONE....ANYONE THAT USE LIPO BATTERIES AND DOESN'T KNOW WHY A 6S BALANCE CABLE HAS 1RED+6GROUND AND HOW TO PULL 2S/3S/ETC POWER(SOMEONE WITH A Y.T CHANEL NOT A KID) I HAVE A 3S 950Mah FOR MOTOR FANS! I'LL CHECK OUT THE AMOUNT OF OF MAH ON 3S ON EACH FAN IN CASE MY DBXLE V2 LIKES IT MORE! ALWAYS PREFER 3 GREAT UPGRATES THAN 5 GOOD ONES! GREAT VID AND NICE DAY! !
EITHER USE A 2S OR 3S BALANCE LEAD ON THE FAN CUT AT THE END TO PULL THE POWER NEEDED OR WIRE IN A 6S CONNECTOR AND WIRE FOR 2-3S
DONT FORGET to take caps lock OFF as its harder to read a long sentence sometimes.
@@rcguygarage I USE BIG LETTERS ON MY CONSTRUCTIONS ENGINES/60cc WARBIRDS(WW2)/DIGITAL TELECOM CENTERS ETC I HAVE DBXLE 2 THAT MEANS 2X4S AND A 3S 950Mah(DON'T YOU RED THE 1ST MSG?) GREAT VID FOR THOSE WHO DON'T KNOW HOW TO MAKE A LIPO CABLE! IF EVERY FAN PULLS 12VX0.3 AMPS NOT WORTH IT AT 12 V 0.6-1 AMP THAT'S A REAL FAN...WILL SEE!
@@marioskalogeropoulos7054 Great but all Im saying here is that IT'S HARD TO READ YOUR COMMENTS that's it. Sounds like you have a good handle on things and electrical understanding. Wired either way you still pull power whether taking from red or black. I prefer red as it gives the user the sight of positive and negative normal wire setup.
Lmao. Rc guy garage way. 3s... 3 fingers, 4s..... 2 fingers.
😂🤣😂🤣YES!!!!
Dude. Ur videos r good but u talk entirely way too much
You have to know that you can't please everybody right? 🤣😂 Guy sit 10 people down at a table someone's not going to like the spaghetti dinner 👍💯👊
@@rcguygarage definitely good stuff thou bro. I am amazed u responded. Thanks for that
@@AaronBittenbender Guy I can only do what I can you know 👍💯
Too bad they don’t already come pre-installed with the balance leads. Awesome fans though! 🤘🏼🤘🏼
It can be just ask! But at this level you'll already know how to solder and you choose 2s or 3s
I agree we do guy , but most younger ppl would feel intimidated , or simply want instant gratification with everything.
RC Guy Garage much agreed as we have been in this hobby for many years. There are always people that do not have the knowledge or means on how to solder. It’s good to know that they can pre-wire the fans upon ordering.
@@TheToecutter69 I think he do alot better selling with plug myself , did you use fans by your toes ?