How to Replace Mass Air Flow Sensor with Housing 97-05 Buick Century

Buy Now!
New Mass Air Flow Sensor with Housing from 1AAuto.com 1aau.to/ic/1AEAF00003
1A Auto shows you how to repair, install, fix, change or replace a broken, worn out, or damaged air flow sensor on a Buick Century. This procedure is the same for many Buick, Chevy, GMC, Oldsmobile and Pontiac Vehicles with 3100 3.1L 3400 3.4L or 4.3L vortech engines, years 96, 97, and 98.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oacb/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oacb/1AXAA00013
For More Info visit us at 1aau.to/h/a5W/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*

[@1AAuto]

@bstancil78 We don't have this listed as fitting a Buick LeSabre. The air flow meter on your vehicle may be different.

[@1AAuto]

@Drech718 You would need to find out what's making the check engine light to turn on.

[@1AAuto]

@xplozyn I am pretty sure the 3.3L never had an Air Flow meter since it was only produced with a Carburetor.

[@comgeek24]

Thank you so much for posting! Your video saved me some time and trouble.

[@sladea82]

Thanks for the video, it was very helpful

[@thomasanderson6426]

Thank you

[@1AAuto]

+Thomas Anderson Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c

[@TheUnendingJourney]

@1aauto there were fuel injected 3.3L's however they relied soley on a map sensor and did not have MAF

[@jtreign9097]

@1aauto my 93 Buick Century has a 3.3L V6 (3300) and is fuel injected and it has a mass airflow sensor.

[@waynesampsell5377]

Mine too it doesn't have a carburetor!!!

[@scrapironproductions]

@1aauto i have a 1990 century 3.3L and i have an air flow sensor

[@Thatboiishawn24]

For my 97 Buick century do I have to remove the hose from the throttle body before putting on the maf sensor

[@jankball9843]

More videos on the 2002 Buick Century please?

[@1AAuto]

We're always cycling through cars filming hundreds of common repairs for common vehicles every month. We'll add this to our list of repairs to film. Check back again and hopefully we'll have it soon. +Dorian Tate

[@xanderkresh8962]

Hello. i have a 3.1l Pontiac firebird that shakes violently. the lights flicker and then it stalls. Everyone has been saying the maf is bad but is that a symptom of a bad maf sensor? or something else. i replaced the cap and rotor. idle control valve, fuel injectors, fuel filter and pump. id like your opinion on this. thank you

[@1AAuto]

We carry two different mass air flow meters for this vehicle depending on on which size motor you vehicle has. If you call our sales staff at 888-844-3393 they can match you up with the proper one over the phone.

[@keepoffmyherb420]

I have a 99 buick century. Amd it starts and idles fine can hear the fuel pump turn on but when i turn the wheele and give it gas it dies but starts right back. But dies again

[@bigboylife5463]

is this the same MAF sensor thats on a 2001 Pontiac Grand Am V6? its not a GT

[@davidurdahl6656]

This is not as easy as you guys make it out to be...

[@1AAuto]

+David Urdahl Thank you for checking us out. We are sorry that this is more difficult than what you are experiencing. We hope you complete the repair as soon as possible. 1aauto.com