ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Folks, if this helped you, please consider supporting my channel. Even the smallest amounts help! On my main page, there is a DONATE TO DANDLINC link on the right side of the DANDLINC Banner that will take you to a paypal donate page for DANDLINC. Thank you!!!!!
A simple, inexpensive and very effective lawn mower fix using nothing more than a small wire from a bread bag twisty tie.
200 Twist Ties: amzn.to/33agqez
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
Lightweight is good and what did I use it for it’s a lawnmower th-cam.com/users/postUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
Just followed your advise and it started on the first pull! Been frustrated for a week trying to get this thing started, so thanks for the video!!!!!
It actually worked! Thank you!
So will this fix my mowers cracked cylinder head?
+Alpatriod yes
+Alpatriod LOL! Absolutely!
+Alpatriod Might fix the carb, but wont fix the cracked cyl head.
Bread tie, probably not. JB Weld, everytime.
+Alpatriod - Apparently some are not familiar with sarcasm or humor.
Or instead of draining fuel tank, clamp the fuel tube using small pair of maul grips and a bit of hose pipe on grip jaws so you don't damage fuel tube.
That would work too...just be careful about damaging the hose as you say. Thx for watching.
i like how you videos look. what camera are you using and what software?
Hey dude it still ain't running right take it apart and clean it with carb cleaner
You are correct. This was just a basic step to get a mower running. You sound mechanically inclined so you know pulling apart the carb and cleaning all the components is a better way....but that scares the average DIYer. Thanks for watching. DANDLINC
I'm going to guess that 1.1k thumbs down is lawnmower repair shops and carb kit sellers.
I wouldnt doubt it.. Very likely...lol
Title of video "Lawn mower won't start"
First sentence in video "This mower is running rough and was DIFFICULT TO START"
IDK, might have something to do with THAT. Just saying .
hahahahahaha
Techno Tard some of the new carbs are literally so cheap, it’s not worth the time to clean old ones.
Aggressively Mediocre in the video, he says, “if your mower is running rough or just won’t start”. Mine would not start and after this video, it works again!
Thanks for the post, fixed it in 15 minutes flat! Zero cost. I owe you a beer.
Really quite an amazing tip. I tried everything to start my relatively new mower that had sat for a season. I literally had a blister on my hand from pulling the starter cord so many times. I had sprayed starter fluid in the carburetor and it would only turn over for a few turns. After trying this tip the lawn mower started on the first pull and ran amazingly. Thanks!!
Thank you so much for this video. Just bought our first house and the owners left us a mower but they hadn't used it in years. This did the trick. Mowed the lawn of my first home!
That's a great feeling!
Where did u buy and how much u paid for?
Same exact thing happened to me. Bought our first home and the owners left us an old mower. Felt great 👍
Great post. Straight to the point, no pointless premamble. Here's the issue, here's the solution. Job done! Brilliant!
!!!! !!!!!!!! !! ! !!!! !!!!. !!!!!! !!!!!!!!! !!!!.
How to start a Honda lawn mower
UN-FREAKING-BELIEVEABLE!!! I had the same problem. I watched a video on carburetor cleaning. Took off the carb, cleaned it, put it back together, put it back on. Spent two hours. No change. Bought a can of carb cleaner. Sprayed the heck out of the carburetor. No change. Put gas treatment in tank. Tried to run the mower. No change. I was ready to buy a new carburetor and I stumbled on this video. What did I have to lose, so I tried it. It took ten minutes to do. I laughed to myself when I pulled the start cord. It can't be this simple I said to myself. VROOOOM!!! Here is my final statement... UN-FREAKING-BELIEVEABLE!!!
I did the same thing, cleaned carburetor and all! But I didn't pay attention to the carburetor screw! And it works!!!!
alverstone14586 d
Well you did not do good job then that jet should hawe been cleaned ass welll
@@lohhjjlohicv6829 what a dick
use ethanol free gas. ethanol is poison to small engines.
The "bolt" is a jet that feeds the gas into the mower from the bowl. This is the problem with 90% to 95% of the time. To confirm this problem before repair, drizzle a little gas into the carb and it should run for just a while. This tells you the mower cannot get it"s own fuel.
Thank you so much! I'm a 55 year-old woman and fixed it myself. I feel so proud. My mower wouldn't start after winter and I drained the old gas and took off the bolt like you said and cleaned the holes with a sewing needle. Mine looked a little different but it had a few holes in it. Cleaned the gunk around the area with an old toothbrush and put fresh gasoline in it and it started! I'm so happy, thanks again for taking the time to make this video.
+Dianne Way to go Dianne! Thank you for watching!
Now that men are getting smart and not getting married these videos are real helpful for women.
I always point out that fact that, yes, you fo need to drain out the old gas, sldo, wouldn't hurt to to replace the fuel line as well as install a gasoline fuel filter, and replace your fuel fulter every two years.
Thomas Paine Yes, on this account, you are very right, now in days, better that men don't get married, as all they want to do is take everything off of you through divorse. What's even worse is they go around marching in DC looking like idiot's wearing vagina costumes and acting stupid.
Hey Dianne, you a THICC granny
TIP: Pinch off rubber fuel /gas/petrol line with locking Vise grips so it doesn't spill all over or pour gas out into pan out of fuel tank, doing two people is easier. Those holes are what feed the fuel to the engine & small pieces of grass, dirt or even plastic from manufacturing can plug them. As well this drians any possible water that may have collected in the fuel bowl.
Thx, Tried n Done, Started n Kept running on 1st pull...
Much easier than other tips... A+
Glad it worked for you! Thx for watching!
I was going to make fun of this but the bread tie is a great carb cleaning tool. Of course not all mowers are the same, but it seems like you've helped many people which is neat! Really if you empty the old gas from the tank and bowl, change the oil every year or two, and run a little Seafoam the first of the year, your mower should be very low maintenance. Don't let it get water in it, and check the oil before you use it. $175?? Wow. Also be sure your blade doesn't become loose or too dull. And any time you work on a mower it's not a bad idea to disconnect the spark plug wire.
Barrett Barker, It's okay to make fun of youtube videos from time to time. Yes, this seems to have helped a lot of people....and all the things you suggested are fantastic additions to keeping a machine running well for years. Thanks for watching and don't forget to subscribe! DANDLINC.
Lawn mower was dead. I made a mess with left over gas leaking all over the place, and the holes didn't look blocked at all.......but....it worked! Thanks for sharing!
John Kairalla same for me!
Yes, great advice!!
After wasting time over the weekend trying to get my mower to start, I saw your video this morning, went home at lunch and tried it and it started on the first pull!!!
Thanks, I paid $85 bucks last season with the same issue.
Thank you for posting this video. My mower had been running 'just fine', though I'll admit that it probably wasn't, it just ran well enough to cut the grass, and then - this weekend, 'suddenly', it wouldn't start.
I'm not the most handy person when it comes to engines - but I followed your recommendations. I disassembled the air intake, and used a stripped bread-tie, and poked several of the gasoline ports, and then worked on the air filter which was totally caked and clogged with grass and dirt. I scraped the gunk off and then poured a tiny bit of gasoline through the sponge (after removing it to a pan to catch the nasty run off ) and then let it air for a few minutes, before reassembling everything. The mower started right up, and it ran much better than it has for a while. Saved me from buying a new one or paying a repair shop. Thanks again!
I got a mower running.I found it on the side of the street in the trash
I love hearing stories like this!! Kudos! Congrats! Way to go!! (Thx for watching too)
I agree!
My grandfather picks up weed eaters and push mowers at township clean up days. Literally people throwing away $250 self propelled with no rust or fading and fresh blades. 90% of the time he takes the carb off and soaks and cleans the gunk out and what do you know
memztv same i found one might have bad spark plug but it ran for a min or 2 then shut back off now it won't start so I'm gonna try to get a new spark plug
clean the carb.
Now I know who stole my mower...
As a woman, I get so excited when I learn new things. Always ready to get my hands dirty. I love outdoor maintenance. Thank you..🌺
As a man, #metoo
ฯMsRoniฯ you have a kitchen outdoors?
@@cashmoneyzo3589 is this a trick question?
@@cashmoneyzo3589 ooooh okay. lol. yes, I'm never too lady like to get my hands dirty. Just put up a storage in the backyard, wooden fence to separate me and the neighbor, walkway from my bedroom to my gazebo to name a few.
By the way... Lawnmower still working. And still walk to my mustang with style, sofistication and maturity. 100% Lady.
@@cashmoneyzo3589 To the guys getting upset about women trying to learn how to fix a lawnmower... can one of you please come over here and fix it for me, then? lol
Thanks! This worked. I clamped off the fuel hose first..Though I had to pull it 20 times...
Thank you!!! I was so ready to drop kick my lawnmower to the curb. This trick worked perfectly.
For a four year post this worked like a charm. Although I forgot to put the washer back on and I filled up the gas tank . I'll have to put it back on next time. Thanks again
I worked on my mower almost all day...wouldn't start. Eventually I gave up and thank God I found this video. I was able to fix the mower in a few minutes.
Thank you!
Thank you for taking the time to share your info. I put this knowledge right to use and immediately went from zero to hero. Bolt hole was clogged as you mentioned and after clearing it, mower started on first pull. Its amazing what can be accomplished when theres someone there to explain what to do.
Great video, thanks. Try letting a little gas run though the fuel line to the bottom of the carburetor when you remove the bowl - catch it with a paper towel so you can see if any gunk is coming out of the gas tank and fuel line with the gas - the same kind of gunk that clogged up the holes in the first place. After cleaning the bolt, be sure to turn it upside down and gently tap it on a fairly soft surface to remove any gunk that might still be in the bolt. I noticed the gasket around the bolt appeared to be torn - think about replacing it to avoid future leaks from the bottom of that bowl.
After only using my brand new mower for about 5 times it stopped turning on. I checked Briggs and Stratton web site for hours couldn't come up with any solution. After watching this video and 15 minutes hands on, my brand new mower started like it was first time. THANK YOU DANDLINC.
Arthur Mansuryan did it have a plastic carb?
Wow I spent 2 hrs trying the filter ,new spark plug,fresh gas and nothing ,but thanks to your video I was able to make it work in minutes .. 10 years after you loaded this video you’re still saving money to a lot a people,thank you.
he sounds like stephen wonderboy thompson 😂
Instead of using that "twisty tie", for about $1 you could buy and use a welding tip cleaner. BTW, that O-ring gasket looked a bit sloppy too.
all these freaking years and i never thought to do something that makes sense and so simple to do....thanks for the tip.
Thank you for your assistance. Using your video I fixed my mower in five (5) minutes. Final cost $5.00. I purchased a can of carb cleaner and a new air filter. Thank you again.
Great George! Glad I could be of assistance. Now get mowing! If I really helped you, feel free to support my channel via a small donation...even the smallest amount goes a long way to helping me make more videos. Regardless, thx for watching!
Thank you so much !!! I tried it and it worked ! There is so many things I would never attempt to try since I wouldn't have a clue what to or how to do it. If it wasn't for TH-cam video's like this one, I would never even tired . THANK YOU SO MUCH, I APPRECIATE IT !!
Fantastic! Thx for watching!
I had a brand new Toro lawn mower that ran flawlessly the first year, but by the 3rd or 4th use of the mower the second year, it was hard to start and then ran only briefly. From the very beginning, I noticed the plastic gas cap was hard to close. I did a little head scratching and came up with the idea that the cap wasn't sealing properly, allowing the more volatile component of the gasoline to evaporate. I emptied all the old gas out & replaced it with fresh fuel. It started right up and has run perfectly since. Bottom line : regardless how much of a pain in the neck securing the gas cap is, make sure it is completely tight. I also went on Toro's website to let them know about the gas cap tighening problem, but I've not heard back.
Great tip! I tried everything to get my lawnmower to start, including changing the spark plug and emptying the gas, this trick worked!!
Hope this comes back to you! the money you've saved people, thanks again feel all the love too❤😊
Thanks a million! My husband tried everything to get our mower started. The next step was the repair shop. I found your video and had my husband watch it. He said it was worth a try. It only took a couple of minutes and the mower started right up.
Awesome! Glad I helped. If you're so inclined, feel free to make a small donation to my channel...just click support on the main page. Every bit of support goes a looong way. Thanks again for watching!
Thank you sooooooooooooooo much and it really really work!
We will donate to DANDLINC. Thanks again
bam! fixed my lawnmower right up! thanks!
Worked great! My mower isn’t quite the same, but your video gave me inspiration on where to look. After taking apart the carburetor (and leaking a bit of gas onto my hands) and reassembling, it started on the 3rd pull! I was about ready to just go out and buy an electric mower, but your trick saved me hundreds. Thank you!
Yeah, sounds great but my mower doesn't have this bolt! now what?
Take carb off and clean out the jets
I mistakenly put gas with oil in my gas tank, already replaced with new gas, it run normally one time 2 weeks later it wouldn't start anymore, replaced spark plug still no start. anybody know what could it be
now days,leaving old fuel in causes the seat up inside that bowl to swell up. it is pressed in and has to be removed with a dental pick. If your mower floods,or will start on choke or primer only,chances are that seat is swelled up. you will have to remove the carb,turn it upside down,remove the float and needle. that little seat is only a few dollars. next year,drain the gas,dont leave it in. Number one problem with mowers now is gasline gets disolved by bad gas and plugs the jets and the seat swells up. plan on changing the gas line also. I use snowmobile clear gasline now,it doesnt break down.
Yours is a good idea to concentrate on the main fuel jet, and clean it with a fine wire. Beyond that, however, the entire carburetor is all too often fouled with fine dirt and needs further cleaning (for which there are many other videos of varying quality).
For example, on the Briggs and Stratton Quantum engine series, the primer bulb, when pressed, creates a pulse of air which is transmitted to a very small hole on the carburetor mounting face. This hole is prone to clog with dust, and is most easily cleaned with a jet of carburetor spray cleaner.
In fact, the standard prescription for cleaning is to unbolt the carburetor (taking care to secure the fuel line against leakage), and disassemble this relatively simple mechanism. The one precaution for disassembling a carburetor-- even a simple one from a mower-- is to work over a large sheet of plastic (a garbage bag will do in a pinch). With that sheet beneath, a lost float hinge pin or other small part is relatively easy to find.
thanks! It worked and cleaned my mower THANKS!!!!! :)
Glad it worked! Thanks for watching.
What if you do this trick and clean out the carb bowl and it still doesn't start? I started it up twice this year already, but the other day I tried mowing, and it died at the end, then wouldn't start up again, and hasn't since. I tried this, and cleaning the bowl, but nothing.
Thanks Bud !!!...I changed my spark plug, air filter and oil ..still wouldn't start... until I tried what showed me and it started right up!!!
SuperNick090! Thx for watching and I'm stoked it worked for you! Woot Woot!!!!
Used strands from wire brush for years. This is better. Don't have to remember where I put that last batch I pulled out. Worked good but this is as good and have bread ties every where
After taking that bolt out,above the bolt is a jet valve. You can use the same wire and stick it through the valve to clean it out also. A can of carb clean with the straw,stick the straw in the hole of the jet vale and blast carb cleaner into it. Most of the time it will stop it from idling up and down.
+Camp Freedom VT Excellent tip. Thx for watching!
Camp Freedom VT up
Fantastic to see a good mechanic at work, there's possibly a position for you were l work.
Rolls-Royce Aerospace UK
Thank you, thank you, thank you!! I mow my lawn and my neighbor's lawn, front and back once a week here in Austin, TX 8 months out of the year and I've had a very hard time keeping my mower running. I've been told that water gets in the line and then I need a carb rebuild, and tune up while their at it. Ha, this very simple fix saved me $175 once or twice a year getting my lawn mower working again. Granted, I did pour Iso Heet in my gas tank before the gas and that may have helped finish the cleaning, but it was definitely this tip that got it running again!
Just saw this note...Glad it helped!
Yep or use something like Sea Foam which basically keep things from getting mucked up. When mower sits with gas there will be a varnish deposit in those places which keeps the fuel from flowing properly. Sea Foam will help remove this varnish.
chascorn
Paul Rebman, Use seafoam. 1oz. per gallon plus a little extra in the tank, it works wonders.
Paul Rebman
If you are careful you may get it back together without damaging the gaskets. But if not or when it still won't start or constantly stalls when hot, etc. Just order a new carb for your mower engine. They are cheap $20, and are very easy to replace. Then never ever put ethanol gas in any lawn mower or other small engine. The carbs are so dang small and finicky, they are easily gummed up, and are too difficult to service. Save yourself a lot of time and aggravation - just order a new carb.
Got caught stealing the twisty ties off the loads of bread at the grocery store, super embarrassed getting walked out by the store janitor :/
A GEM of a comment! LMAO. Thanks for watching Emanuel!!!! DANDLINC. (Don't forget to subscribe)
Dude, next time just by the bread & hot dogs, after your work done and enjoy, the work you've done and you didn't steal a tie, stale somebody's bread and raised the price of food.
This comment is great nice one never was expecting this on a fix it video
I'm gluten intolerant. I find this comment highly offensive.
thank you so much. i did this and it works
This really works I just fixed my mower. Thank you man.
Pro Tip: Also: make sure your tires aren’t flat, and the paint job is fresh and shiny.
daryl fitz yes and inflate to 40 psi and don’t paint it blue, it won’t start, has to be red, pro tip, 👌.
I'm dirt poor and did this and I can't say thank you enough. Runs like it was new again. South Alabama and already having to cut first of March. Never seen such a warm winter in all my 69 years
I just want to thank you for the video and saving me time and money . I was about to throw it out today and something told me check TH-cam and your video came right up.
That shouldnt be enough to keep something from running. Major design flaw!!
Thanks, this is what worked for us. God bless you Sir for your video.
Glad it worked! Thank you for watching! Now get mowin'
Thanks so much...it worked perfectly to let my mower keep running!!
Edward, glad it worked! Thx for watching!
You need to repair mowers for a side job.
I looked at a half-dozen other mower repair vids before I found this one - this one is the most helpful by a big margin. thanks for fixing several mowers with this one vid!
I did exactly as you indicated and my lawnmower stared right away. Thanks for posting the video.
+Carlos C Rodgers Fantastic!
Who did it stare at? JK, I know what you meant. ;)
you are a life saver sir.. thank you.. mine worked...
It worked!!!!!! I owe you $80 for a shop repair! Or case of your favorite beverage!
it worked for me too ☺
+Steve wGØAT Just saw this note...I'm glad it worked. Pls consider supporting my channel via the 'support' button on the main page. Every penny goes a long way. Thx for watching!
I owe him money for hamburgers. I will pay him next Tuesday. . .
Steve wGØAT good
Worked like a charm!!! In order to avoid draining the gas, I flipped the mower up side down. Used compressed air instead of a twisty tie (the compressor was closer than the kitchen).
It is not free,you have to buy a loaf of bread to get the thingy with the paper or plastic on it??
lol a loaf of bread is like $.99 where I live
Go to the produce section of the store. They usually have the twist ties to close bags for veggies and they are free. But why not buy something you can drink after mowing the lawn?!
+Mark Brad I save all those ties off each loaf of bread I have a drawer full for projecst such as this they are handy.
+POt123ga You call that bread,God help America.
+john palma what do you mean?
I just do the same thing to a junk mower today and and works well now😁 thank you for sharing bruu!
If you have acess to a compressor use compressed air to blast out the main jet with;
then you dont have to buy a loaf of bread to clean out the carb. main jet!
Yeah you can buy small tins of compressed air for not much more than a loaf of bread & you can use it for all sorts of applications.
but I want to make a sandwich after getting the mower started and cutting the grass. You can't do that with compressed air :)
The bolt is the carb jet. And yes, cleaning the jet solves the problem 9/10 times.
use premium fuel in small engine , for some reason it works better and does not gum up in a carburetor after long storage ,
second if you have a fuel valve turn it off while the engine is running and wait until the fuel dries out from the carburetor ,
Fuel left in the carburetor for a long time will dry up and damage the carburetor , installing a fuel shut off valve is easy ,
If engine is hard to start remove the spark plug and use a propane torch burn off the Corbin residue and whatever might be on the spark plug , I do it until the Central Electric and the ground electroid get red hot , of course wait until the spark plug cool down before reinstalling it , in the Old Country Palestine we used to put a small amount of gasoline on the ground put the spark plug in the middle of it and set it on fire , that always worked to get us out of a jam ,
That is excellent advice. A few more pennies a week can save hundreds in repairs.
Nidal Shehadeh it's ethnol that kills the small engines.
I can't see what you are doing, how it's taken out and put back, because your hand is there.
My problem wasn't the bolt on the carborator, it was clean as a whistle, the gas was just old. But your video got me to drain out the old fuel and found a nasty clogged air filter. Thank you.
Awesome! Glad it inadvertently worked! LOL. Thx for watching.
Thanks ! I hate to wait on something to get fix..Now can do it myself...thanks again.
That was exactly what it needed. THANKS!!
Putting new oil in the engine would help a lot, also.
Too True! Thx for watching!
My mower is fixed. Thanks a million
Awesome! I'm glad it worked for you! Feel free to support my channel if you're so inclined. Donations are never expected...but they're ALWAYS Appreciated! Thx for watching!
30 min later couldn't start it...called mower guy roughly $80 10min later watching your video fixed!!!!!😢ain't got much money so I thank you so much!!off to mow my grass!!💃💃
+samoan Warrior Awesome! Glad to hear it helped. Thx for watching!
I tried everything else first and nothing worked. I found your video and this got my mower working again! Thanks so much!
+Glenn Burn Glad it helped Glenn, thanks for watching. If you're really happy, feel free to make a donation to my channel. Now get mowing!
Fresh gas, fresh oil, cleaned carb, changed air intake gasket, changed brake control (didn't have one) checked spark plug, checked gaps will not start! What as I missing? Put a teaspoon of fuel in the spark plug hole. ran for a few seconds then stopped, I feel the fix is something very simple, but I can't figure it out. Also changed the spark plug boot and internal clamp(pretty badly rusted)Changed primer bulb also. did the wire thing as you suggested,what as I missing!
How old is the mower?
My lawn mower does not have the metal bolt in the bottom. It has plastic one and it doesn't have the holes in the bolt. What do i do?
Drill some holes in it.
safeer ahmad this model that he is showing has a Tecumseh engine. Yours is likely either a Briggs & Stratton engine, or a Honda engine. If you can take off the plastic engine hat on top there is usually manufacturer sticker on the engine underneath if you want to be sure what model you have. If you're not too picky about being exact just take a picture of your carburetor for reference and look for a carb cleaning video that has a carb that looks like yours.
Ray Robinson haha 😂😂😂
8Jory no stickers lol
Cool
Just fixed my mower with bread tie and ur video.. Thanks.. I'll sub.
worked like a charm! thank you so much!
5kyg898
My lawn mower sat around for 5 years and would not start, but after watching your video I was able to get it running in just a few minutes. I had no idea that the bolt had holes in it so I did not know to clean it.Your video may not pertain to everyone, but it worked for me!THANK-YOU !!!
Thanks so much ! Worked like a charm !
+Will G Great News! I'm glad it helped and thx for watching!
Worked for me :) I guess I don't have to give my lawnmower repair guy $75 now.
I didn’t believe you. I did a bunch of work, sprayed my eye with carb cleaner, and ultimately did exactly what you said and my mower I got from my neighbors trash pile is perfect now.
Great work, thank you
Didn’t work. Now what? And now it leaks gas every time I tip it over.
Recently my 3 yo mower started playing up on me. It could start a few times in a day and then I'd have to wait for the next day to use it again. After watching this video and some other related videos I decided to give it a go. I cleaned that bolt with a paper clip, also replaced the filter. Along the way I tilted the mower the wrong way while checking the blades and caused petrol leak..haha....but over all, the mower is now easy to start as the day I bought it. I had also checked the service cost in a local mower shop, which quoted about 120 to 200 NZD. This video saved me the money. Thanks man.
Fantastic to hear! Congrats. Thx for watching...feel free to slide some of that saving my way via a teeeenny tiiiiiiiiiny donation. LOL!
This was so useful! I didn't need to remove anything but I learned where to lightly knock that got my lawnmower working.
Make sure you use premium gas and this usually won't happen in the first place.
i was charged 90 bucks for that
Oh man, thanks so much for sharing this! It was the first vid that popped up and your trick worked like a charm. I owe you one!
100% worked. Just wish I would have not filled the gas before. Could have saved a step.
Glad it helped! Please subscribe to help me grow and if able, support us via paypal.me/DANDLINC
Even the smallest amount goes a long way to helping me make more videos. Thanks!
Thank you so much. I owe you a case of beer haha.
I'm still trying to figure out how I got my Weiner lodged in the fuel bowl.
It happens...mine small enough It won't get stuck