Those numbers are right up there. Mine made 388hp and 394tq with a dyno tune as well. Could’ve gone for more but the knock sensors start to pull timing at 6.2k RPM.
@@zap091000 all car manufacturers show off Crank HP not wheel HP. My numbers are to the wheels. Horsepower to the wheels will always be lower than to the crank.
Should have done a few runs with the hood down to see what it really makes. Youu drive down the street with the hood open. Just curious to see the difference. Nice truck!
I notice from this clip your tailgate spoiler what brand is that? I'm planning to do the simular long tube headers high-flow cats, I think the dyno tune is the right way to maximize performance.
what all is on this truck mod wise? just headers,exhaust system and a intake with the dyno tune? if so not bad thats 450hp-460hp at the crank. a good 55hp-65hp over stock.
@@Trail.Blazer902 at the crank stock they make 400 straight pipe and cai could realistically free up so much and get you by 440 I’m pretty sure that truck is at 500 right now
That boy Doug got his truck moving 🤘🏼🤘🏼
Hell yeah
Yeah brotha this guy is legit. He did my challenger with headers and a Borla and gave me 45hp and 50 tq
Very legit and good dude
let's see the dyno with the 6.4 manifolds. 🔥
Start getting some runs in 💪🏾💪🏾
What drop was on the truck? I recently bought a 2020 but not sure on what to do with. I like the set up.
He needs the 6.4 mani next made a nice diffrence on mine
That power level is impressive. Tell me everything you did to the truck. I have a 2020 Laramie Longhorn and want to duplicate your mods!
So what did he do besides removing the Rev Limits?
Those numbers are right up there. Mine made 388hp and 394tq with a dyno tune as well. Could’ve gone for more but the knock sensors start to pull timing at 6.2k RPM.
why is your hemi not getting the full stock 395hp rating to begin with? im soo confused
@@zap091000 all car manufacturers show off Crank HP not wheel HP. My numbers are to the wheels. Horsepower to the wheels will always be lower than to the crank.
Is there a way to help with knock sensor issue?
@@-ouv run better fuel like e85
lame
What exhaust other than long tubes do you have?
What was the HP gain?
What spoiler is that on tail Gate
Should have done a few runs with the hood down to see what it really makes. Youu drive down the street with the hood open. Just curious to see the difference. Nice truck!
3/5 drop? or 4/6
What tune you get
How Much Did He Charge You?
I notice from this clip your tailgate spoiler what brand is that?
I'm planning to do the simular long tube headers high-flow cats,
I think the dyno tune is the right way to maximize performance.
What have you done to this
Sheshhhhh
How much did he charge you
You know these 8speed hemis are hard to dyno due to the gear shifting to much
You can lock it to a specific set of gears
OK....AAAAAND????? RETARD
top sp
what all is on this truck mod wise? just headers,exhaust system and a intake with the dyno tune? if so not bad thats 450hp-460hp at the crank. a good 55hp-65hp over stock.
Headers, exhaust, new intake and 6.4L manifold with 6.4 injectors
Isn’t he still on the 5.7 manifold ?
Cause 6.4 manifold doesn’t have the throttle body facing upwards like the 5.7 ones
@@luis_5643 no not in this video he doesn’t have it but he does have it now video coming out for it soon
Messaged you guys on instagram, looking for details on the lowering kit used on the RAM. Truck looks and sounds awesome.
Lowering kit is from ihc suspension 4/6 drop
why is your hemi not getting the full stock 395hp rating to begin with? im soo confused
Your talking about to the crank, there talking about to the tires, probably 450 - 460 hp to the crank.
@@Trail.Blazer902 at the crank stock they make 400 straight pipe and cai could realistically free up so much and get you by 440 I’m pretty sure that truck is at 500 right now
where you get that tailgate wing from?
BMC extreme customs
Did it change the top speed or still 105?
Yes sirrr no more limit
Aye man y’all from the h? Would your friend be down for some fun runs? I got a 4th gen tune only
Hy we in the h let’s set it up😈
@@low57ar58 I live about a hour and a half away lemme get your insta, and see when I can get it in my schedule
I got longtubes on mine almost cut .5 sec off my 1/4 mile
Longtubes make a difference specially with a tune😈
Do you recommend these on a ram bro I have a ram to
Yes
Did y’all have to change the computer for him to tune it
Yes you have to get an unlocked pcm
@@-ouv where would I get an unlocked pcm and what year is that bad boy new to the channel
what is the drop and the wheel tire size on the ram? could you give the offset as well. thanks for any info.
The drop kit is from IHC suspension 4/6 drop. The wheel set up on this video was honeycombs 22s thanks for watching.
Did he have to modify the wheels or they fit perfect????
What catback are you running and is this with or without cats?
Catless longtubes or “race pipes” with straight pipe to duals