THANK THANK YOU! I've been trying to get my oven door back on and your video was only one I found with exact same hinges, got it back on and my wife is happy again. 😁
Such a huge help... Thank you for making and sharing this video. I know I'm not calling a appliance repair service. THANKS TO YOU . YOU SAVED ME AT LEAST $80 FOR A SERVICE CALL NOT INCLUDING THE LABOR. ! NOW I'M ORDERING THE HINGE AND FIXING IT MYSELF..
Thank you so much for this video. I spent 50 plus min trying to figure out how to put my oven door hinge back in place until I finally found your how to video!
It worked, thanks! One tiny detail is that the new hinge came with the catch retracted and it wasn't obvious how to open it. But it opened when replacing door. Thanks again!
Mine broke cuz my cat tripped me while the oven door was open. I was so scared it would need to be like professionally repaired and cost a ton but im so glad this video exists and explains so well. Thank uou!
thank you, thank you - On putting the door back in I could not get the door to shut properly, even after rotating locking tab, it would close to high, (couldn't figure what I was doing wrong) - but as you suggested I then aligned the *hinge notch* - rotated the locking tab and then door shut correctly. Note while I was doing these procedures I kept the door in the open position.
Thanks again AppliancePartsPros! This time, the kids and I fixed the hinge on the oven door! $45 in parts, 1/2 hour of labor. I think I should take us out to dinner for what we just saved in a service call!
Thanks for the very helpful video...it gives us confidence in putting our oven door back together and installing it! We appreciate you doing it and will buy parts from you in future! Beth
For putting the door back together, one may find it easier to flip the door and lay the inside cover on the table/floor first as opposed to the opening/disassembly procedure where the inside cover faces you.
I have a Bosch wall oven with lower hinges. I have seen older videos which don't use up to date models. I can't get the door apart to get to the hinges. The door seems to not want to come apart at the top and there are no screws to get to the top or handle.
great vid but I never could get right hand side to release. All I had to do was replace oven element so it wasn't a big deal. Wish I could figure out why right side wouldn't release. ??
Got the door off and apart on my own, but then I was in trouble trying to get it back together. Thank you! The only thing that makes me mad is the realization that my $1500 Kitchenaid stove is the exact same as a $500 Maytag.
Lol, this has got to be the most ridiculous design for an oven door. Literally need to line up a thousand things and only at the end hold it down with what? 4 screws. What a joke to save 2 cents worth of material. Hope you were able to succeed!
My current predicament 🤦♀️ I didn't think it would be so difficult to put back together. I just wanted to clean all the glass 😂 now I've got pieces of over door everywhere mixed up all the screws. Got the insulation wet. Hot mess express over here. I was ready to just go buy a new stove 😂
+Chris Anspach You can go to our website and enter your appliance model number to view the part list to be sure you get the correct part for your model.
Very helpful Got hinges replaced and door back on but hinges seem to be very tight and door will not stay open all the way without my knee holding it back. Do these hinges relax overtime?
I would double check with your model number to make sure you got the correct hinges. They do make similar hinges with different springs. For example a stainless steel door is heavier than glass so it would have a different spring. If they are correct then double check that they were installed properly.
Have an amana took 6hours to remove door after changing the igniter door no close . The locks wouldn't come out .tabs broke off impossible job .sawzall required only releases when door closed
All the models vary but yet they are all similar. You will have to take the door off the oven. Then set it on a table and take the door apart to get at the hinges. You can go to our site and enter your model number, then look at the breakdown of the door to view it all apart. You can also post the question on our repair forum and the techs will help you out.
gonepriused I'm not sure I follow what the problem is. You can post any questions along with the model number of the appliance, on our repair forum and the techs will help you out.
The hinge on my Jenn-Air model JDS9860ACB does not come away with the door as shown in this video. There is no movable tab that allows you to remove the door with the hinge attached. The hinge stays with the oven when you remove the door and is held to the door frame with two screws. . The spring broke on one of the hinges, and it is necessary to replace the whole hinge--part #74011142. Because the spring was broken I was able to extricate the old hinge, but I'm unable to install the new one. It has to be inserted from behind the door frame, and there doesn't seem to be enough clearance to get the hinge positioned. Am I doing something wrong?
My 27 yr. old stove must be made different. I don't have that piece you show to manually move before taking the door off. My problem is that sometimes the door will only shut so far--where the door would be considered ajar. Funny thing is that it opens with no problem. I usually can get it shut by opening fully and trying to shut it a few times. Tonight it just won't shut. To take my door off, all I have to do is lift up and pull out. I was hoping that maybe I just have one side out too far and have to wiggle it into place and it will shut, but so far no luck. Do you think I just have to properly align it or do you think I need new hinges? GEEZ, being so old and sold by Kenmore, if I need hinges I hope they still sell them. Thanks for sharing your video.
UPDATE: This morning while the sun is in the kitchen I managed to find the problem. The right hinge would move until the "ajar" position, then it gets stuck and pushing on the door just makes it lift out of position. I remembered I had a can of WD-40 and gave it a spray/move door/wait/repeat and now all is well. The hinge is still making a funny noise so I imagine it will have to be replaced eventually (if the stove doesn't die first). The only markings I can see on it is that it's a Sears Kenmore Mark 3 and I know it was purchased in 1979. Is that enough info to find a hinge?
Matt, this was such an excellent video. It walked me through the entire process with incredible clarity. Thank you so much for your effort. Well done!!
We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
The new hinge with the spring attached seems to be stuck or something. The part that sticks out the top simply just does not move. Is it defective or is this normal and I'm supposed to do something.l?
A few different things could be causing that. It could be that these aren't the correct hinges for your model, the incorrect hinges from the kit could have been installed or not installed on the correct sides, or the parts could be defective. Give us a call, and we'll help work through the issue with you. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
No problem! If you have any problems during or after the installation, we'll be glad to help. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
This video isn't for your exact model number, but it should give you enough reference to be able to do the repair. th-cam.com/video/MGKTxalmiSY/w-d-xo.html
+Ismael Garcia Without know what you have I could not say, most hinges are the same but sometimes the left and right are different. You can also post the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
Watch this video for reinserting the door of a Whirlpool Oven, WFE770HOFZ2. The manufacturer instruction book is poorly drawn, and instructions are not correct in my view. We spent 45” trying to use the book. Using this video, we had it reinstalled in less than 60 seconds. Thank you!
We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
You should be able to replace the hinges on your oven door, but I can't point you to a correct part or give you a price quote without a model number for your appliance. You can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx Any time you have appliance questions, remember that we offer free technical advice and diagnosis 7 days a week. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/.
It looks like the model number you gave me is for a range hood, not a range or an oven. This is the diagram for that model number www.appliancepartspros.com/parts-for-ge-jv348l2ss.html. If you need help locating the model number for your oven, you can do so using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
This video may apply to Whirlpool, Sears, Kenmore, Roper, KitchenAid, Estate, Inglis, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, or Norge electric ovens. We may have a video for your model, though, and if not, give us a call and we'll talk you through the process. We offer free technical advice and diagnosis 7 days a week. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
THANK THANK YOU! I've been trying to get my oven door back on and your video was only one I found with exact same hinges, got it back on and my wife is happy again. 😁
Such a huge help... Thank you for making and sharing this video. I know I'm not calling a appliance repair service. THANKS TO YOU . YOU SAVED ME AT LEAST $80 FOR A SERVICE CALL NOT INCLUDING THE LABOR. ! NOW I'M ORDERING THE HINGE AND FIXING IT MYSELF..
Thanks! You saved my buns!!!! I could NOT have gotten the oven door back together without your video! Hubby was about to get a whole new oven
Great video!! Even 10 years later your video is still helping!
Thank you; I couldn't for the life of me remember how the trim went on when I finally got the part in to replace my hinge; you're the bomb
You're welcome!
Tremendous help! Cannot thank you enough for oven door issues videos! Was about to spend $$$ on a new oven until ran into your channel!
Thank you so much!!! Your step by step guidance helped us replace the hinge! Took us 3 hours 🥴, but we're proud, thank you 😌
Thanks a million, had to a replace an oven door and this video saved us hundreds of dollars 👍
Thank you so much for this video. I spent 50 plus min trying to figure out how to put my oven door hinge back in place until I finally found your how to video!
You're welcome! Sometimes all it takes is watching someone else do it first. Glad we could help!
Marriage saving video lol. Appreciate your video very much. Fixed my oven without any issues.
It worked, thanks! One tiny detail is that the new hinge came with the catch retracted and it wasn't obvious how to open it. But it opened when replacing door. Thanks again!
You just saved me so much money. Thank you from the bottom of my heart. 🙏🏾🙏🏾🙏🏾
Mine broke cuz my cat tripped me while the oven door was open. I was so scared it would need to be like professionally repaired and cost a ton but im so glad this video exists and explains so well. Thank uou!
thank you, thank you - On putting the door back in I could not get the door to shut properly, even after rotating locking tab, it would close to high, (couldn't figure what I was doing wrong) - but as you suggested I then aligned the *hinge notch* - rotated the locking tab and then door shut correctly. Note while I was doing these procedures I kept the door in the open position.
You are welcome. If we can help you with anything in the future please let us know.
Thanks again AppliancePartsPros! This time, the kids and I fixed the hinge on the oven door! $45 in parts, 1/2 hour of labor. I think I should take us out to dinner for what we just saved in a service call!
Awesome good job on getting the oven fixed and I definitely think dinner is in order!
+AppliancePartsPros
Are both hinges supposed to be “tight”? I replaced one, but the other one moves freely. Does it need to be replaced?
Thank you for such a thorough, well-done video!
Thanks for the very helpful video...it gives us confidence in putting our oven door back together and installing it! We appreciate you doing it and will buy parts from you in future! Beth
For putting the door back together, one may find it easier to flip the door and lay the inside cover on the table/floor first as opposed to the opening/disassembly procedure where the inside cover faces you.
I have a Bosch wall oven with lower hinges. I have seen older videos which don't use up to date models. I can't get the door apart to get to the hinges. The door seems to not want to come apart at the top and there are no screws to get to the top or handle.
What is the model number of your oven?
great vid but I never could get right hand side to release. All I had to do was replace oven element so it wasn't a big deal. Wish I could figure out why right side wouldn't release. ??
Got the door off and apart on my own, but then I was in trouble trying to get it back together. Thank you! The only thing that makes me mad is the realization that my $1500 Kitchenaid stove is the exact same as a $500 Maytag.
Lol, this has got to be the most ridiculous design for an oven door. Literally need to line up a thousand things and only at the end hold it down with what? 4 screws. What a joke to save 2 cents worth of material. Hope you were able to succeed!
My current predicament 🤦♀️ I didn't think it would be so difficult to put back together. I just wanted to clean all the glass 😂 now I've got pieces of over door everywhere mixed up all the screws. Got the insulation wet. Hot mess express over here. I was ready to just go buy a new stove 😂
Once you have the hinge replaced, flip the assembly over and work backwards. It will save you a ton of hassle trying to line everything up
Thank you for the very helpful video! You saved me big time.
Thanks, thanks so much! I have the feeling we did that together! 😂😀
The side trim broke on my stove so I need to take the whole door off to replace it?
Why is my hinge not moving now? The locking mechanism is jammed. There is 0 information online on how to fix this .
Just incredible video. Thank you for saving me…
You are very welcome! If there is anything we can help you with in the future please let us know.
Where would I find a replacement for the whole door?
How to be sure you have the exact hinges for your Kenmore appliance. I do have the model number and the serial number. Thx!
+Chris Anspach You can go to our website and enter your appliance model number to view the part list to be sure you get the correct part for your model.
Very helpful Got hinges replaced and door back on but hinges seem to be very tight and door will not stay open all the way without my knee holding it back. Do these hinges relax overtime?
I would double check with your model number to make sure you got the correct hinges. They do make similar hinges with different springs. For example a stainless steel door is heavier than glass so it would have a different spring. If they are correct then double check that they were installed properly.
@@appliancepartspros hey,I took my door off for cleaning now one hinge is locked
Is there a way to release it?
Thanksss
@@annapolski hey, We're having the same issue. the one with spring on the right is locked. Were you able to figure out how to unlock it?
I may have missed it but why is there three hinges if only two are needed? Thanks in advance
Incredibly helpful followed it directly work great thanks
Have an amana took 6hours to remove door after changing the igniter door no close . The locks wouldn't come out .tabs broke off impossible job .sawzall required only releases when door closed
Hi Appliance Pros, How do i replace the hinges for a model # Maytag MER5875RAS? Im having a heck of time figuring it out.
All the models vary but yet they are all similar. You will have to take the door off the oven. Then set it on a table and take the door apart to get at the hinges. You can go to our site and enter your model number, then look at the breakdown of the door to view it all apart. You can also post the question on our repair forum and the techs will help you out.
are using both hinges with the springs on each side, cause one side is a passive hinge the otherside is a Active hinge.?
gonepriused I'm not sure I follow what the problem is. You can post any questions along with the model number of the appliance, on our repair forum and the techs will help you out.
AppliancePartsPros 008i76322q11ssdffgjkjkl)
. 1××30621325
You just saved my life
Thank you for your excellent video!
This video had everything that I needed to reassemble my oven door. THANKS!
You're welcome!
Do you have a similar video for Frigidaire electric models? Or would everything be the same for hinge replacement as this one?
Lauren Fleming This video may be helpful to give you an idea how doors come apart but the Frigidaire will be different.
The hinge on my Jenn-Air model JDS9860ACB does not come away with the door as shown in this video. There is no movable tab that allows you to remove the door with the hinge attached. The hinge stays with the oven when you remove the door and is held to the door frame with two screws. . The spring broke on one of the hinges, and it is necessary to replace the whole hinge--part #74011142. Because the spring was broken I was able to extricate the old hinge, but I'm unable to install the new one. It has to be inserted from behind the door frame, and there doesn't seem to be enough clearance to get the hinge positioned. Am I doing something wrong?
Eileen Beaudine With this style you may have to pull the oven out enough to access the hinges.
My 27 yr. old stove must be made different. I don't have that piece you show to manually move before taking the door off. My problem is that sometimes the door will only shut so far--where the door would be considered ajar. Funny thing is that it opens with no problem. I usually can get it shut by opening fully and trying to shut it a few times. Tonight it just won't shut. To take my door off, all I have to do is lift up and pull out. I was hoping that maybe I just have one side out too far and have to wiggle it into place and it will shut, but so far no luck. Do you think I just have to properly align it or do you think I need new hinges? GEEZ, being so old and sold by Kenmore, if I need hinges I hope they still sell them. Thanks for sharing your video.
UPDATE: This morning while the sun is in the kitchen I managed to find the problem. The right hinge would move until the "ajar" position, then it gets stuck and pushing on the door just makes it lift out of position. I remembered I had a can of WD-40 and gave it a spray/move door/wait/repeat and now all is well. The hinge is still making a funny noise so I imagine it will have to be replaced eventually (if the stove doesn't die first). The only markings I can see on it is that it's a Sears Kenmore Mark 3 and I know it was purchased in 1979. Is that enough info to find a hinge?
Matt, this was such an excellent video. It walked me through the entire process with incredible clarity. Thank you so much for your effort. Well done!!
You're welcome! Glad we could help.
Excellent video! Thank you for the step by step video!
You're welcome!
GODDAMN this was a lifesaver
I meant it opens only a little and it won’t go further down . What do you think problem could be ?
We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
Thank you so much
It really helped me
You're welcome! Glad we could help you out!
The new hinge with the spring attached seems to be stuck or something. The part that sticks out the top simply just does not move. Is it defective or is this normal and I'm supposed to do something.l?
A few different things could be causing that. It could be that these aren't the correct hinges for your model, the incorrect hinges from the kit could have been installed or not installed on the correct sides, or the parts could be defective. Give us a call, and we'll help work through the issue with you. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
No problem! If you have any problems during or after the installation, we'll be glad to help. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
Thanks. This helped a lot.
On a Kenmore 790 9462990, when is the door supposed to latch?? What tells the door to latch?
How to only change the Handel on Maytag MER5870ACB
This video isn't for your exact model number, but it should give you enough reference to be able to do the repair.
th-cam.com/video/MGKTxalmiSY/w-d-xo.html
my whole left part of the oven door hinge is completely gone ,do I follow this same process to fix it
+Ismael Garcia Without know what you have I could not say, most hinges are the same but sometimes the left and right are different. You can also post the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
Thanks Im sure this video saved me quite a bit of money :)
Super helpful, thank you!
Watch this video for reinserting the door of a Whirlpool Oven, WFE770HOFZ2. The manufacturer instruction book is poorly drawn, and instructions are not correct in my view. We spent 45” trying to use the book. Using this video, we had it reinstalled in less than 60 seconds. Thank you!
This is awesome, except I cant get the face of the oven off because its stuck shut
I have General Electric oven and door only open this much what could be the problem
We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
what do you do if the hinge become Jammed... right side hinge got stuck, guest be ordering new one.
+MARCELLINO GUARNERO If it is bent or damaged somehow you would have to replace it. They usually sell the hinges as a complete assembly.
+MARCELLINO GUARNERO "CHECK" and make sure your 'door-removal' clip is in place! Push 'down' with screwdriver so it is flush with open channel.
This video was very helpful! Thank-You!
Thanks, I'm glad the video helped.
Thanks. Very helpful
You're welcome!
Thank you very much you are doing a great job i learn how to replace it.
You're very welcome!
Hey,I cleaned my oven and now One hinge is stuck 😳😳😳 what can I do
I back together it but now everything is loose and I don’t know what I did wrong I guess I didn’t put those plastic stick things back in correctly 😅😅😅
Is there anything we can help you?
I have a parmco and cannot get the oven door back on
We do not have any information on this model. You might try a forum closer to home or try the manufacturer.
hi does this work for GE stainless steel model? about how much are they?
You should be able to replace the hinges on your oven door, but I can't point you to a correct part or give you a price quote without a model number for your appliance. You can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx Any time you have appliance questions, remember that we offer free technical advice and diagnosis 7 days a week. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/.
AppliancePartsPros thanks a bunch. Do you also carry washer and dryer parts?
Yes, we do!
AppliancePartsPros model number is JV348L2SS ..........serial number is HD833760U
It looks like the model number you gave me is for a range hood, not a range or an oven. This is the diagram for that model number www.appliancepartspros.com/parts-for-ge-jv348l2ss.html. If you need help locating the model number for your oven, you can do so using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
Thank you. You very very help me
Thank you, sir!
That was excellent. Thank you very much.
Glad the video helped you out!
every time I try to put the door back the hinges snap closed.
Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
+AppliancePartsPros I figured it out. It was a 2 person job and it needed to be lined up perfectly.
I need instructions to eliminate squeaking oven door when open and closing.
The first thing I would try is to apply a high-temperature oil to the hinges and see if this stops the problem.
Very helpful!
Thx. Still relevant
You are welcome. If there is anything we can help you with in future please let us know.
Awesome video. Thanks!
Glad the video helped you out!
I can't for the life of me get the door frame into those tabs, pretty sure my whole oven frame is just messed up
For clarity, the locking hinge won't rotate. Brand new part!
Does this work for Samsung?
This video may apply to Whirlpool, Sears, Kenmore, Roper, KitchenAid, Estate, Inglis, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, or Norge electric ovens. We may have a video for your model, though, and if not, give us a call and we'll talk you through the process. We offer free technical advice and diagnosis 7 days a week. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
cute hair
good video, thank you
Great video
chookvalve Thanks, hope the video helped you get the hinges changed!
Thank you
This is torture to watch. Who needs water boarding when we have video like this?
Have you ever heard of a cordless drill?
Sweet mustache!
Hope the video helped you get the oven fixed!
+AppliancePartsPros it did, absolutly! The oven door is now fully functional and I now have a righteous "No shave November" plan😉
That plastic door trim can go to hell. Good video though.
Hi
Hello. Is there something we can assist you with?
@@appliancepartspros
Hi,
Mi electric stove stoped working for 3 days now, I need it to be fixed
Thank you
انابندرمن قنات بندر٠٩٠
گوگل ترجمه نمی دانست چه که به معنای، اما من امیدوارم این ویدئو به شما کمک کرده!
Lol...
Z Ack I wrote my comment four years ago and now I see it funny, hahaha
This video not worth my time I mess up on my oven following ur steps
Derp...