I don't even have a driving license let alone know how to fix stuff but I always watch your videos from start to finish. You have a great way in front of camera.
I have considered making a ramp truck/hauler out of one of those before. Iv worked on a good number of them as small box trucks. Most of them iv messed with had little underpowered 4cyl diesels in them
Mount the O2 sensors in a tin can. The air in there is super clean. I believe that'll work versus having them disconnected. Hopefully you have the pre-cat oxygen sensors installed for fuel mixture.
Looks awesome! When you you started shrinking the one wire and didn’t put your shrink wrap on I was yelling at the TV. I’ve done that same thing sooo many times lol.
Nice job you did on the truck. I’ve enjoyed all the jolly green videos too. I grew up right down the road from the old time power show/museum and my great uncle showed his oxen there for years. My family business is still right there on route 9, you sound like you’re not too far away. 👍🏻
Man you should really have a guard on a grinder especially with a cutting wheel I understand it makes it easier to see what you’re doing I do the same thing
Don't know if it was mentioned but the reason the old pump died is no sock on the bottom and it sucked up sediment, rust and dirt from the bottom of the tank. Swirl pot area should ALWAYS have the sock in place. That wiring is definitely something that could cause headaches too. Use some non insulated butt splices and heat shrink over the top of the joints. You'll never have to worry about the wiring again. Stay humble bro, I love your channel. 👍👍
Cheers for an update video bro, never had the 350 Isuzu small trucks here in NZ which is a shame as they would have gone well here with all the hills some roads are built on. Safe travels up your way.
In order to get your mice in jolly green take a five gallon bucket and mice catcher with lots of peanut butter on the flap and make sure it's filled with windshield washer ,the blue one ...it will kill them instantly as fall in bucket and keep the smell if Thier body's rotting too .
Happy to see a new video, I barely recognize the truck with the flatbed on it, awesome to hear it running again. Have been wondering what happened to camper build for the S10
Awesome truck with that v8 in it in would like one to replace my hilux 4x4 it’s v8 as well I’ve owned to for 24 years now to engine rebuilds real work horse Great job always wiring with them fuel pump problem Is that a high lift forklift awesome thing seen one going back a bit great thing Best of a truck 👍💯
Good video again good see you again keep making videos please Keep making good good videos my friend you would read my mind I was going to ask you in a comment when are going to get back to Freightliner be safe my friend
Ok tried that b12 chemtool in the gas tank. So far I’m gonna say good results cleaning some tank skuz line funk and injector Skyme. Had seen on Vice Grip Garage. Might help your project. Like all your videos. Good closeups when doing the intricate parts. Thumbs up
Looks like you could be a premium pine shavings sponsorship coming your way, loll nice 👍🙏🙏🙏👍👍👍👍🙏🙏🙏👍👍👍👍🙏🙏🙏🙏👍👍👍👍lol kool BigAl California.tractor supply company oh yeahhhhhhhh, good job, thanks BigAl
The only reason I can see for two OEM pumps to fail is if you run the truck on low fuel in the tank, remember that the fuel keeps the pump cool. Try not less than a quarter tank.
The pump sits inside of the cup that fills with the returned fuel, running below 1/4 tank wont hurt it but running completely out of fuel will. The problem was all the contaminates in the tank and the old pump was a delphi pump(rebranded by GM) which has the sock inside the bowl and this design is not meant to have contaminants inside the bowl. The GM/Delphi pump is a far superior design over the traditional sock on the outside, but a deign will only go so far in a tank filled with trash, it's only a matter of time before the new sock plugs up and burns out the new pump.
Oh I see now , that’s why it looked taller, it’s spring loaded, da, I should of known that, nice, what engine is in it big block, or something else, nice , thanks BigAl.
"Our OTHER cabover" That's a cute little truck, never realized they came with small block Chevies. I think I've only seen diesel powered ones. As I watched I said, "you forgot the heatshrink". Oh well, been there done that... I had to google that Hudson Valley Old Time Power...never heard of it...I might have to check it out sometime as it's not far from me either...
Well long time man just say happy holidays to and how’s the weather their our is get in the middle 20 and the snow storm is west of us so it is a miss !!! 😀
I changed the fuel pump about 10 years ago. I'm pretty sure it needs a new fuel pressure regulator now. I have to start it with ether but it runs great.
There is old pick up replacement filler tubes at the local parts houses, I love this ramp truck wrecker, nice what is the hauling capacity??!! Nice , how’s is jolly green giant, nice work, thanks BigAl California.
Hey Mike buddy how's it going. This was a great video you put together. I want to wish you and your family a Merry Christmas. I hope you enjoy this special holiday. Thank you so much about the information on the Crocs man. I was able to find a pair in a XXXL sz15 with my foot barely fit in it. It was crushing & hurting my toes. I had to cut a section out in the toe box of each crocs so two of my toes can hang out because my toes are 6 1/2 inches wide from my big toe to my lil toe. It's a big wide foot man. My foot outgrew shoes & socks 30 years ago & flip flops is the only footwear that will fit on my foot. But since I broke both of my feet beginning of last year from a truck 🚛 accident I was involved in wearing flip-flops in 30 degree temperatures in the winter time is getting brutal. These Crocs should really help keep my toes warm since I cannot get socks to fit on my foot. It is always awesome to see you wearing your Crocs in your videos buddy. It is awesome to see that you are a Croc fan & thank you so much for wearing them in your video. Again Merry Christmas to you and your family. PS. Did you get a new pair of Crocs for Christmas?
I enjoy your videos. Have you considered replacing the fuel lines to and from pump? Twenty years puts the fuel line near or at end of life. On my truck I was having trouble starting and it ended up being the old fuel lines sucking air, even though they were not leaking, causing engine to loose prime.
The only other problem that the fuel system can have on the 350 vortec motors is that the injection spider in the intake can get wore out and gm came out with a new design I had a hard start issues on my 99 Tahoe with the same motor and that was what worked for me
the very first video i saw of yours was of this truck. sure have missed seeing your videos. hope you and yours are doing well. baffles are not needed because the fuel pump assembly has one built in. driver side window letting all the crud come in and accumulate on the head liner? or was it a leak from the light mounted on the roof letting it mold? she sure looked happy to get that metal for a barn. nice score. did you get rid of the duramax?
I have a 96 Chevy 4x4 I’ve put several fuel pumps in myself But the last one I forgot to put the strainer filter on the bottom of the pump and I haven’t had any trouble since It’s got a filter on the inside of the frame I’m thinking maybe to much restriction
the reason i always found that the pumps keep going is that the fuel pressure regulator under the upper intake on the engine is no good and leaking or the entire injector assemble is no good.
From watching the video, it appears that the crud on the ceiling of the cab was from the roof vent being open and letting the weather blow into the truck as it sat parked up for a long time.
So what did you sell ? The green cabover gets done when it gets done ! That Isuzu ain’t a bad looking and running truck ! I’d like one but ain’t got much use for it ! QUESTION -> I’ve notice over the years of travel in the NE part of the country those stone walls everywhere along the roads , how old are they , are they from the 1700’s ?
Since it has a Chevy motor then its isuzu cabover. I know i drove several UD with nissan strait 6's in them and i will say one bad thing about them. Do not put more weight on the bed than it says to. They do t stop worth a damn . They will haul more than the bed says but they dont stop worth a dang
You’ve gotta hotrod that thing some how. Still trips me out that they came with a gas V8 in the USA. Underpowered shit diesels everywhere else in the world.
I don't even have a driving license let alone know how to fix stuff but I always watch your videos from start to finish.
You have a great way in front of camera.
Thank you I really appreciate it!
I would sure love to see more of this truck working. I own a squarebody and that's what brought me here, but I really like the Isuzu.
Nice job! I couldn't believe how the interior cleaned up. It almost looked new.
Lol that was crazy!!!!! I think even Nike was shocked lol
Love the nprs…I have a 2007 gmc w4500 with a 16ft box / lift gate and won’t trade it for anything!145k miles diesel
I have a 1997 Isuzu NPR with the 350 Chevy. I bought it in 2007.
Excellent job reviving the cab over ramp truck it's gonna be nice they'll last forever
Great trucks they last forever also clean the tank or replace it and do a sea foam to it
What is this so called "sea foam" for the tank? Amd yes he should probaly replace it with a plastic tank because they don't rust
Great vehicle no doubt…
your spine won’t like it after
4 years.
Ok now I see the engine 602 604, LS , nice , thanks BigAl good ol truck, thanks for the vlogs I like watching the tinkering, nice 👍 , thanks BigAl.
$20 says there's a fuel pump sock floating around in the bottom of the tank or in the bottom of the box the last fuel pump came in.
Nailed it
Nice job with the repairs Mike! 🙂👍 That truck sounds pretty good. I hope your projects are going well. Take care 🔧
Wassup Zane
@@michaelhartloff3833 hey Mike! 👋🙂
Nice a video from ya.Missed ya bud. Been watching since ur older videos.
I just re started re runs last night. Found an episode I haven't seen yet. Took me by surprise lol
I have considered making a ramp truck/hauler out of one of those before. Iv worked on a good number of them as small box trucks. Most of them iv messed with had little underpowered 4cyl diesels in them
Like the little cab over. Good video
Enjoying your videos. Looks like you have plenty of projects to keep you busy! I think you have a great gal there. Better hang on to her. Peace
Mount the O2 sensors in a tin can. The air in there is super clean. I believe that'll work versus having them disconnected. Hopefully you have the pre-cat oxygen sensors installed for fuel mixture.
Ive always wanted 1 of those trucks but they can be spendy even blown up Glad u fixed it! 👍👍🙏🙏
yep Nice job I couldn't believe how the interior cleaned up. It almost looked new.?!
👍👍👍👍👍👍
Nice to see ya Mike, hope your well 👍😁
Looks awesome! When you you started shrinking the one wire and didn’t put your shrink wrap on I was yelling at the TV. I’ve done that same thing sooo many times lol.
Lol absolutely!
Sweet little rig! Glad to see you again dude!
Glad to see another of your videos! Missed ya.
Loved mine, your gonna keep it!
Nice job you did on the truck. I’ve enjoyed all the jolly green videos too. I grew up right down the road from the old time power show/museum and my great uncle showed his oxen there for years. My family business is still right there on route 9, you sound like you’re not too far away. 👍🏻
Man you should really have a guard on a grinder especially with a cutting wheel I understand it makes it easier to see what you’re doing I do the same thing
Don't know if it was mentioned but the reason the old pump died is no sock on the bottom and it sucked up sediment, rust and dirt from the bottom of the tank. Swirl pot area should ALWAYS have the sock in place. That wiring is definitely something that could cause headaches too. Use some non insulated butt splices and heat shrink over the top of the joints. You'll never have to worry about the wiring again. Stay humble bro, I love your channel. 👍👍
Glad to see a new video. Nice job on the little cabover. Be safe.
Enjoy the content, maybe you can box around the fuel pump area so you still have support for the bed and access to the fuel pump.
Cheers for an update video bro, never had the 350 Isuzu small trucks here in NZ which is a shame as they would have gone well here with all the hills some roads are built on. Safe travels up your way.
There's plenty of small Isuzu trucks in nz
you should put a bed spray liner so it lasts longer
Another interesting video. Thanks for sharing 😎👍
In order to get your mice in jolly green take a five gallon bucket and mice catcher with lots of peanut butter on the flap and make sure it's filled with windshield washer ,the blue one ...it will kill them instantly as fall in bucket and keep the smell if Thier body's rotting too .
Mike you should use a guard on your grinder for safety reasons.
Like that little truck. Looks like it has some power as well. Rarely seen in England.
Awesome Job
Merry Christmas to you and the family
Good truck, very nice shape with power, it's a keeper !
Happy to see a new video,
I barely recognize the truck with the flatbed on it, awesome to hear it running again.
Have been wondering what happened to camper build for the S10
Awesome truck with that v8 in it in would like one to replace my hilux 4x4 it’s v8 as well I’ve owned to for 24 years now to engine rebuilds real work horse
Great job always wiring with them fuel pump problem
Is that a high lift forklift awesome thing seen one going back a bit great thing
Best of a truck 👍💯
Good video again good see you again keep making videos please Keep making good good videos my friend you would read my mind I was going to ask you in a comment when are going to get back to Freightliner be safe my friend
100% just the connection! I would have left the pump
Good job.
Ok tried that b12 chemtool in the gas tank. So far I’m gonna say good results cleaning some tank skuz line funk and injector Skyme. Had seen on Vice Grip Garage. Might help your project. Like all your videos. Good closeups when doing the intricate parts. Thumbs up
Looks like you could be a premium pine shavings sponsorship coming your way, loll nice 👍🙏🙏🙏👍👍👍👍🙏🙏🙏👍👍👍👍🙏🙏🙏🙏👍👍👍👍lol kool BigAl California.tractor supply company oh yeahhhhhhhh, good job, thanks BigAl
great video, hope to be able to see more coming
The only reason I can see for two OEM pumps to fail is if you run the truck on low fuel in the tank, remember that the fuel keeps the pump cool. Try not less than a quarter tank.
The pump sits inside of the cup that fills with the returned fuel, running below 1/4 tank wont hurt it but running completely out of fuel will. The problem was all the contaminates in the tank and the old pump was a delphi pump(rebranded by GM) which has the sock inside the bowl and this design is not meant to have contaminants inside the bowl. The GM/Delphi pump is a far superior design over the traditional sock on the outside, but a deign will only go so far in a tank filled with trash, it's only a matter of time before the new sock plugs up and burns out the new pump.
Oh I see now , that’s why it looked taller, it’s spring loaded, da, I should of known that, nice, what engine is in it big block, or something else, nice , thanks BigAl.
"Our OTHER cabover" That's a cute little truck, never realized they came with small block Chevies. I think I've only seen diesel powered ones. As I watched I said, "you forgot the heatshrink". Oh well, been there done that...
I had to google that Hudson Valley Old Time Power...never heard of it...I might have to check it out sometime as it's not far from me either...
New content!!!!!!! Love it Bro!!!!!!
Well long time man just say happy holidays to and how’s the weather their our is get in the middle 20 and the snow storm is west of us so it is a miss !!! 😀
I changed the fuel pump about 10 years ago. I'm pretty sure it needs a new fuel pressure regulator now. I have to start it with ether but it runs great.
There is old pick up replacement filler tubes at the local parts houses, I love this ramp truck wrecker, nice what is the hauling capacity??!! Nice , how’s is jolly green giant, nice work, thanks BigAl California.
Hey Mike buddy how's it going. This was a great video you put together. I want to wish you and your family a Merry Christmas. I hope you enjoy this special holiday. Thank you so much about the information on the Crocs man. I was able to find a pair in a XXXL sz15 with my foot barely fit in it. It was crushing & hurting my toes. I had to cut a section out in the toe box of each crocs so two of my toes can hang out because my toes are 6 1/2 inches wide from my big toe to my lil toe. It's a big wide foot man. My foot outgrew shoes & socks 30 years ago & flip flops is the only footwear that will fit on my foot. But since I broke both of my feet beginning of last year from a truck 🚛 accident I was involved in wearing flip-flops in 30 degree temperatures in the winter time is getting brutal. These Crocs should really help keep my toes warm since I cannot get socks to fit on my foot. It is always awesome to see you wearing your Crocs in your videos buddy. It is awesome to see that you are a Croc fan & thank you so much for wearing them in your video. Again Merry Christmas to you and your family. PS. Did you get a new pair of Crocs for Christmas?
I originally came for the squarebodies, but this is my favorite truck of yours. Would love to see more footage of it working.
I enjoy your videos. Have you considered replacing the fuel lines to and from pump? Twenty years puts the fuel line near or at end of life. On my truck I was having trouble starting and it ended up being the old fuel lines sucking air, even though they were not leaking, causing engine to loose prime.
The only other problem that the fuel system can have on the 350 vortec motors is that the injection spider in the intake can get wore out and gm came out with a new design I had a hard start issues on my 99 Tahoe with the same motor and that was what worked for me
the very first video i saw of yours was of this truck. sure have missed seeing your videos. hope you and yours are doing well. baffles are not needed because the fuel pump assembly has one built in. driver side window letting all the crud come in and accumulate on the head liner? or was it a leak from the light mounted on the roof letting it mold? she sure looked happy to get that metal for a barn. nice score. did you get rid of the duramax?
Happy New Year
And the new one looks taller, right, are they the same height ??!! Nice 👍 thanks BigAl.
Hell yeah, Forky!
I would have added a flange to the deck plate and then bolted it down so it could be removed again without cutting it again
you replaced 2 fuel pumps and now you had to cut the steel decking off? How did you replace the other ones?
I miss jelly green
What happened to green giant?
Have you thought about replacing the inline fuel filter
Very odd trucks but certainly a really cool rig.
Were these made with a 5.9 cummins?
I'm guessing you had to buy the filter separately for that old pump.
I have a 96 Chevy 4x4 I’ve put several fuel pumps in myself
But the last one I forgot to put the strainer filter on the bottom of the pump and I haven’t had any trouble since
It’s got a filter on the inside of the frame
I’m thinking maybe to much restriction
the reason i always found that the pumps keep going is that the fuel pressure regulator under the upper intake on the engine is no good and leaking or the entire injector assemble is no good.
From watching the video, it appears that the crud on the ceiling of the cab was from the roof vent being open and letting the weather blow into the truck as it sat parked up for a long time.
Your tank seems to be almost empty...the fuel is used to cool the pump so you should keep your tank full as much as possible ...
Really enjoyed the video as always. Isuzu sounds good. Maybe not quite as good as old red.. How's that S10 going I notice its got a flat tire?
But whats the situation with that giant garage behind tge truck you don't seem to be using? A clean up of cluttered garages are quite popular nowadays
I was happy to see your new video. Nuce phone. Hiw is Jolky Green doing , any plans ?
I thought you were supposed to crimp those butt connectors together before heating the glue/heatshrink?
It’s weird hearing a Isuzu truck that sounds like a Silverado
I get some weird looks from time to time lol
@@NOT_FOR_HIRE haha yeah well
People see new things every day
I wish we had GM V8 powered Isuzu’s here in Australia
That cool old strobe light bar work?
So what did you sell ? The green cabover gets done when it gets done ! That Isuzu ain’t a bad looking and running truck ! I’d like one but ain’t got much use for it ! QUESTION -> I’ve notice over the years of travel in the NE part of the country those stone walls everywhere along the roads , how old are they , are they from the 1700’s ?
Have you had a chance to work on the driveway at your property ?
Not yet but I might go down there today and make a video
So what is happening with the freightshaker like to more on it
I just bought one of these trucks. What’s the wheel base on this truck? I would like to do the same and make it a ramp truck
22:58 Must been one of those Car warranty has expired calls.
Since it has a Chevy motor then its isuzu cabover. I know i drove several UD with nissan strait 6's in them and i will say one bad thing about them. Do not put more weight on the bed than it says to. They do t stop worth a damn . They will haul more than the bed says but they dont stop worth a dang
Are they selling that blue 2500hd GMC Sierra? If so lmk interested will buy it!
Your close to me Maryland bay bridge
Just imagine how much it would cost to get the lumber and roofing at a store
How's Jolly Green going with those LED headlights?
Good so far!
33:44 what tractors are them? Little new here and spotted them antique jems
👍
Do the lights work on the truck ?
Aww please tell me you didn't sell the tow truck?
Maybe a lot of water in fuel system because of bad filler.
Since your replacing the one that's on the fuel pump with the fuel pump
Hi, at clock count #32:29 isn't that your fork lift machine on the right? nice truck.
I am in upper Marlboro
How much for the truck with fuel problem
You’ve gotta hotrod that thing some how. Still trips me out that they came with a gas V8 in the USA. Underpowered shit diesels everywhere else in the world.
Looking for a trailer on my pa property.
Any interest in trading that for a model a rat rod 1930? I'm located in RI
Man, too bad it isn't the diesel version
Nice van but should not use your phone when driving.....
Why don’t Americans use safety guards on angle grinders ?