Looking forward to some of the 5 axis lessons to get upgraded with mastercam tutorials. I’ve finished everything mastercam from the academy, and finished all the free classes from mastercam university. Can’t find much multi axis stuff though. Again, I love what you guys are doing over there. Maybe I’ll camp out in your parking lot in flower mound until Titan gives me a job someday! 😆😆😆
Iam from kerala. Iwould like study more about mastercam and 5axis tool paths. I also folws yours tha great Titans acadamy.Your calasses very helpful for us.Thanhs👏👏👍💕
Fusion 360 version please! Don’t forget about all the commoners like me just starting up. Fusion 360 has value and catching up quickly. No way would I ever buy Mastercam. Maybe NX subscription though🤔
AWESOMENESS BY THE WAY. WE BARELY HAVE A 4TH AXIS IN OUR SHOP, THAT WOULD BE COOL, BUT I WOULDN'T KNOW WHERE TO START TO PROGRAM THAT. 4TH AXIS I CAN DO, 5TH MIGHT BE A CHALLENGE
Cool toolpath. Too bad I'm not doing 5 axis yet. I should be by now though. Gotta setup those tool holders properly for these types of toolpaths. Do you use the machine sim in verify?
You can download the educational version from the Mastercam website for free. (You cannot post G-code, but you can learn to program multi-axis for free with their educational videos)
@@jaxnaturals dont forget about the cost of postprocessors ;) for each 5Axis machine that can cost between $3k-'$10k (plus maintenance cost for 5x posts) but an home learning version is for free
Yes this is great it works also in parallel, along curve, and rotary toolpaths
I prefer rotary roughing but it all works
Looking forward to some of the 5 axis lessons to get upgraded with mastercam tutorials. I’ve finished everything mastercam from the academy, and finished all the free classes from mastercam university. Can’t find much multi axis stuff though. Again, I love what you guys are doing over there. Maybe I’ll camp out in your parking lot in flower mound until Titan gives me a job someday! 😆😆😆
Morph is a super powerful toolpath. easy to understand and easy to use. Titian, make more video with multiaxis toolpaths plz.
I agree with you it is also one of my favorite ones
Yes it’s super easy to program too
We use this technique for finishing
ASPE I like your videos too :)
@@robertsoso7093 thanks
That is a really cool technique, Stuart. Nicely done!
Pretty slick, always neat to see how 5 axis is done
Great Video! Just noticed it said Mill Supervisor, Congrats Stuart!
Iam from kerala. Iwould like study more about mastercam and 5axis tool paths. I also folws yours tha great Titans acadamy.Your calasses very helpful for us.Thanhs👏👏👍💕
Fusion 360 version please! Don’t forget about all the commoners like me just starting up. Fusion 360 has value and catching up quickly. No way would I ever buy Mastercam. Maybe NX subscription though🤔
I love your videos Titans of cnc.
Always great posts
AWESOMENESS BY THE WAY. WE BARELY HAVE A 4TH AXIS IN OUR SHOP, THAT WOULD BE COOL, BUT I WOULDN'T KNOW WHERE TO START TO PROGRAM THAT. 4TH AXIS I CAN DO, 5TH MIGHT BE A CHALLENGE
We’re making free tutorials for our Academy.titansofcnc.com
5th axis is actually easier than 4th axis so it shouldn’t be that hard for you
Stuart ROCKS!
Cool toolpath. Too bad I'm not doing 5 axis yet. I should be by now though. Gotta setup those tool holders properly for these types of toolpaths. Do you use the machine sim in verify?
Great video .. is this part a functioning aerospace component or is it a test piece ??
Awesome! thanks for sharing your work!
Very good
Go Stuart!!
Thanks max !
Just awesome! 😀
Looks great! Can you share the Mastercam file for this?
That’s so awesome!!!
Great technique!
I'm cnc turning programmer after watching this video I must do work in 5axis
I use that strategy but for finishing... I'm using Alphacam thought
cool isnt it
Awesome!
I love this! awesome!
I used to like to follow along when you used Fusion 360 but I can’t do that now as you have, for some reason, switched to Mastercam.
Probably sponsor reasons
Or its because fusion doesnt have all 5 axis capabilities
We still do both... Mastercam has better 5 Axis capabilities and is ITAR compliant.
Yes I understand, it’s a pity that Mastercam doesn’t offer a scaled down version for non-commercial users who wish to learn the software like Fusion.
@@tj9382 wouldnt work because then mastercam must be cloud based so they can remove features later and let you pay if you want to use them again.
They actually do and it’s free... go to the resources tab on our academy.titansofCNC.com
Hello i hope you will notice my concern can you pls help me how to start in 5 axis programming
Any reason you're not using a centric vice for this kind of work?
Wanted the extra clamping force.
@@TITANSofCNC maybe look at Schunk KSX?
Looks like the five axis in Mastercam is moduleworks
How many times do you "go ahead" in a day?
431
how much cost this machine?
5axis machines are not cheap :(
niceeeeeeee
Why not work from the top of the part down ?
The tool is a shoulder mill, they are not designed for plunging hence why he went bottom up.
not wth this type of tool
Great video! How can i have this Mastercam program?
Thank you!
You can download the educational version from the Mastercam website for free. (You cannot post G-code, but you can learn to program multi-axis for free with their educational videos)
The cost for the full version will run you $4k+ to $40k depending on options plus yearly maintenance
@@jaxnaturals dont forget about the cost of postprocessors ;) for each 5Axis machine that can cost between $3k-'$10k (plus maintenance cost for 5x posts)
but an home learning version is for free
👍
Looks like you have gone west young man ))
How make it on VF2? 😂
Can i make this on a tormach 440? 🤔😂
Same process with a trunnion
the same settings as on the vid