Conner McClarren this guy used his truck he is dumb to think that the back corner part of the truck is 1000 pounds the engine alone Waze about 2000 pounds
The sledgehammer was misleading, clearly the bricks shattered. the structural integrity of the bricks broke on sudden impact, but it's clear the glue was still holding on. So no fault of flex glue in that test. It was the brick material that failed around the glue, therefore the glue had nothing left to hold onto but dust. and the hangar test it clearly look like you put less Flex glue on the little cube then you did the gorilla glue which is thinner and covered the whole surface. You only put a thin bead across diagonally which probably didn't coat the entire surface of the cube. And who's to say both cubes were as clean as one another? I do automotive painting for a living. You did not prep those metal surfaces and there's no saying one wasn't more adhesive than the other. you should have light sanded both surfaces of both cubes and then cleaned with wax and grease remover and let dry for 15 minutes before you put the glue on. Both of those tests were unfair in Flex glues corner
Then gets shrapnel lodged in balls. Doctor:Hey why do you have brick shrapnel in ur balls? I was trying to test different glues to see which was stronger and a brick shattered.
the one flaw is the lack of time consideration. Clearly, the glue would hold a heavy weight FOR A TIME, but the weight itself acted like a sped up gravity and since the glues are flexible, they bend under the weight and that will cause them to give out in a given timeframe BASED upon the weight. If you left your truck on the ramp for 30 min, it prob would have given out, too. So.... I didn't learn much with this except that gorilla glue foams up and that seems like an undesirable thing in most cases. Plus, did the metal blocks have any abrasive roughness to help the glue cling? That wouldn't matter in a side by side test probably but anyway....
Just for future reference, You should have started the Flex glue off at 10 pounds just like the Gorilla glue and used every weight for the Flex Glue that you used for the Gorilla Glue so that they both endured the same amount of stress from each weight which would make it a more even test. Overall awesome video though!
Its 920... I have to be up at 430.... I have absolutely zero need to know which glue is stronger. Yet here I am, "glued" to these 'Flex' videos. #betterthanslimevideos
very humorous ( were gonna destroy something in this video ) tests the last glued metal blocks . . . everything falls to the floor. xD , and i think i heard a cat . reason both glues did not hold better is because the metal has oil infused in it. heat the metals up first to remove the oil, then try the glues again. awsome video !!
you also forgot to mention the density of metal is considerably higher, less porous than brick, so no penetration = less holding power. If it can't penetrate the metal and bond more thoroughly then you're just relying on the power of the glues adhesive properties itself. Naturally the brick is going to hold more because of this difference of fact.
Gorilla glue is a water-activated epoxy, your supposed to apply a light coat of water to what your fixing then CLAMP because gorilla glue will expand to fill any crevice and harden.
The thing about flex glue is that in the commercial it states that it can hold 1000 lbs when set for 1 week. Now when you let the flex glue dry for only 1 day, I didn’t have its full potential, but I understand that gorilla glue is meant for speed drying but for less power, and flex glue is a slow drying product with tough strength results. So the test with the square pipes is about how much strength each could hold in one day of drying, which is why flex glue lost
Depends on what you are gluing together. I guess both of these are general all purpose glues. Will either work on something that gets very hot or is subjected to freezing tempertures. Certainly gives a good baseline as to what each of the glues can do with regards to steel and bricks. Might go out later and see if I can find some flex glue in the hardware shop, gorrila glue is everywhere
Pro tip: Gorilla glue works best when the bonding surface is wet. Also, clamping is needed because of the expansion. Last, blue tape the bonded crevices to make the most of the glue expansion.
u cant start one later because the other one failed at 30. it failed at 30 with all the other weights added, u gotta start from the beginning with both. love the videos but it makes more sense
If your starting at 45lb with flex glue then its not the same conditions. Going in weight increments is kinda putting stress on the glue and could be slowly separating it.
On the flex glue one inch square strength test. The chain slipped and ment the glue was taking more weight/ downward force as the weight accelerated toward the floor as the chain slipped. And once the weight stopped it wrenched the glue apart. Unlike the gorilla glue which was was gently tested and pulled apart.
As you said there was still brick left ln the flexglue when you hut it with the sledgehammer. This would presumably put the failure point on the bricks, not the flex glue, therefore making it an inconclusive test regarding the strength of flexglue
Gorilla glue is cures with H20, the instructions tell you to rough metal surfaces and then dampen. Not familiar with flex glue but would be interesting to retry this expirament but follow the instructions on both products.
![FLEX TAPE vs. Gorilla Tape: which one is better? [9]](http://i.ytimg.com/vi/Ro-7sAkVB3s/mqdefault.jpg)
We need to weaponize flex products. Flex bullets, flex grenades, Flex propelled grenades, etc
Flex Machine Guns, Flex Flame Throwers, and the ultimate Flex Nuke.
@@somerandomname3124 indeed
Nah, then the enemy can use our ammo against us. Bullets are normally destroyed, but now they will not
Fpg
flex phill pills
Pills that fix y o u
“Gorilla glue, for the toughest jobs on planet earth!”
“Flex glue it even works underwater!”
I think ur kinda late
we are all late guys, the yt algorithm is broken
@@oongaboonga9481 kk, we get it.
Yup
@@oongaboonga9481 Dont know what you mean...
Bruh... the bricks broke before the glue
But it sucked when it was used on an apparently painted metal surface...
The planet broke before the guardsmen did
Great logic
facts
Conner McClarren this guy used his truck he is dumb to think that the back corner part of the truck is 1000 pounds the engine alone Waze about 2000 pounds
The sledgehammer was misleading, clearly the bricks shattered. the structural integrity of the bricks broke on sudden impact, but it's clear the glue was still holding on. So no fault of flex glue in that test. It was the brick material that failed around the glue, therefore the glue had nothing left to hold onto but dust. and the hangar test it clearly look like you put less Flex glue on the little cube then you did the gorilla glue which is thinner and covered the whole surface. You only put a thin bead across diagonally which probably didn't coat the entire surface of the cube. And who's to say both cubes were as clean as one another? I do automotive painting for a living. You did not prep those metal surfaces and there's no saying one wasn't more adhesive than the other. you should have light sanded both surfaces of both cubes and then cleaned with wax and grease remover and let dry for 15 minutes before you put the glue on. Both of those tests were unfair in Flex glues corner
So??
@@yosefsts7977 bruh
@@yosefsts7977 bruh
Yosef Sts bruh
@@yosefsts7977 bruh
Depends. Which glue can fill the cracks in my heart
Elmer’s glue. Nostalgia heals all wounds
I find liquid plumr to give the best results.
Did Phil Swift saw your heart in half to prove the power of flex tape?
_”To show you the power of flex tape, _*_*VRRRRRRRRRRRRRRRRRRR*_*_ , I sawed the relationship in half!”_
for rhat you will need flex seal
*wears safety glasses but wears shorts*
Seems safe
Then gets shrapnel lodged in balls.
Doctor:Hey why do you have brick shrapnel in ur balls?
I was trying to test different glues to see which was stronger and a brick shattered.
They say to let Flex glue fully cure for 7 days. I would like to see it's strength at that point.
rwplm It can stop a bullet and stop nukes
@@brightknowell-trading3434
That sounds like a lot of damage
rwplm sounds? *it is*
it is supposed to dry for 7 days only if you want its maximum strength...IT EVEN WORKS UNDERWATER
@@greenninjaihyt5461 Underwooder*
the one flaw is the lack of time consideration. Clearly, the glue would hold a heavy weight FOR A TIME, but the weight itself acted like a sped up gravity and since the glues are flexible, they bend under the weight and that will cause them to give out in a given timeframe BASED upon the weight. If you left your truck on the ramp for 30 min, it prob would have given out, too. So.... I didn't learn much with this except that gorilla glue foams up and that seems like an undesirable thing in most cases. Plus, did the metal blocks have any abrasive roughness to help the glue cling? That wouldn't matter in a side by side test probably but anyway....
mix the two glues to create a super glue wow
good idea
THIS^
Super duper glue
Flex glue would get weakened by Gorilla Glue
He's too dangerous to be left alive
Just for future reference, You should have started the Flex glue off at 10 pounds just like the Gorilla glue and used every weight for the Flex Glue that you used for the Gorilla Glue so that they both endured the same amount of stress from each weight which would make it a more even test. Overall awesome video though!
You should see how much flex tape it takes for your truck to pull a trailer.
Nina Lan this is actually a good idea he should do it for sure
wow that's a cool idea
FlexRope.
Trex and gorilla tape are the strongest. Ive already watched that video on youtube for no reason at all. Just like this video.
@@BikingWIthPanda yes wait no
FLEX STRING
3:16 imagine how painful that would of been if they didn't break, lmao
I bet Phil is watching being all cocky knowing that it’s gonna pass 😂
Alex Sherfield Damn right i am
Phil is spelled like Phill w 2 l
@@fsaviator4570 nopy
@Jamie McCallum really?
@@HylianKirbo How? I thought it's spelled like that
What a wholesome video, and a nice content creator. I’m proud of him for being a nice person.
3:00 wtf did I jus hear.
Ahhahahah
I thought it was the sign of the devil o was all like oh hell nah
That's satan supporting the destruction of things
You heard a voice changer
I know
I think you have to activate the Gorilla glue with water to maximize bonding potential.
Finally someone else that's used gorilla glue
And you have to wait 7 days for flex seal to fully harden
You're also supposed to clamp what you're bonding.
and don't forget to boil the water before putting in the pasta
@@golden10_21 and to close all your word documents before turning off with the icon on the start menu, not the button
School glue is stronger
Boy
True
And tastier
elmer's glue is the best of all!!!!!!
Iv only tasted 1 so...
Just found your channel tonight man. You seem super down to earth and really enjoy your videos. Hope you get some more growth you deserve it!
Do an "experiment " using flex tape as toilet paper. Report back to us with your results. Thanks!
Jon P Isn’t that you’re supposed to do?
Extreme waxing. Say goodbye to your butt hairs (and your butt cheeks too).
He might tape his butthole buts ok
tape 2 together
Flex Glue like sex lube ?)
I was thinking after the truck didn’t work “what if he just uses a sledgehammer” and that’s exactly what you did.
Its 920... I have to be up at 430.... I have absolutely zero need to know which glue is stronger. Yet here I am, "glued" to these 'Flex' videos.
#betterthanslimevideos
I'm glad you're here :)
@@TylerTube 😁😁😁
Why so early
Say sorry for that joke
@@prestonlant1089 teacher life ✌🏼
"You have my sword." "And my bow!" "And my 4x4!"
You’re so underrated
I was about to say it
I was about to say it
you didnt let the flex glue dry long enough, just saying,
Your editing/speaking at the camera has evolved so much in a few months, you're a really great TH-camr! Been there since about 1000 subs!
Cobain 92 dame same saaameeee
Cobain 92 points for a respectable profile pic👍🏻
I love Metallica!
-Phil swift joined the chat
-Gorrila glue mascot joined the chat
Intense stare at each other glues
very humorous ( were gonna destroy something in this video ) tests the last glued metal blocks . . . everything falls to the floor.
xD , and i think i heard a cat .
reason both glues did not hold better is because the metal has oil infused in it. heat the metals up first to remove the oil, then
try the glues again.
awsome video !!
*awesome
*emosewA
you also forgot to mention the density of metal is considerably higher, less porous than brick, so no penetration = less holding power.
If it can't penetrate the metal and bond more thoroughly then you're just relying on the power of the glues adhesive properties itself. Naturally the brick is going to hold more because of this difference of fact.
Gorilla glue is a water-activated epoxy, your supposed to apply a light coat of water to what your fixing then CLAMP because gorilla glue will expand to fill any crevice and harden.
Daniel Bullock ya that is what I was thinking... test diff epoxies and clamp damn you.
You should make a tent or a hammock from flex tape it would be amazing
i literally said this lmao
He would be stuck to it forever
The thing about flex glue is that in the commercial it states that it can hold 1000 lbs when set for 1 week. Now when you let the flex glue dry for only 1 day, I didn’t have its full potential, but I understand that gorilla glue is meant for speed drying but for less power, and flex glue is a slow drying product with tough strength results. So the test with the square pipes is about how much strength each could hold in one day of drying, which is why flex glue lost
3:21 that's a lotta damage
goku guitar You think identity theft is funny?
@@briandellarocca3670 ok boomer
Depends on what you are gluing together.
I guess both of these are general all purpose glues.
Will either work on something that gets very hot or is subjected to freezing tempertures.
Certainly gives a good baseline as to what each of the glues can do with regards to steel and bricks.
Might go out later and see if I can find some flex glue in the hardware shop, gorrila glue is everywhere
I tried to whip your picture off my screen
I Hammered this brick in half.
Can I go home now?
Chris P. Bacon
No now you must repair said rock.
Coming back to these videos after a harrowing night because they are so calming, thank u for making good reliable content king
soooooooo....Glue sustained better than the actual brick xDD
what happens when you mix flex glue and gorilla glue?
th-cam.com/video/wumgFV_1_HI/w-d-xo.html
Good videos man, keep it up
Your channel is growing very rapidly congrats
Good vids, but i agree with j in the bay. (But dont stop making these!!)
does this channel revolve around flex products now
It’s time for another episode of....
*WHAT’S IN MY RECOMMENDED?*
Elmer's glue beats both
No its not
plush Studios r/whooosh
Does Elmers even work underwater
transfactory
yes..............
Pro tip: Gorilla glue works best when the bonding surface is wet. Also, clamping is needed because of the expansion. Last, blue tape the bonded crevices to make the most of the glue expansion.
NOW THAT'S A LOTTA DAMAGE!
Mistertbones Identity Theft is funny to you?
@@briandellarocca3670 you didn't even answer my question my question was what would happen if you used Flex tape on a trampoline will it still bounce
5:04
*THATS A LOT OF DAMAGE*
I'm actually supposed to be asleep, but I decided to watch this video instead🙃
X austy.frosty X same
Me too
I appreciate the love man
Pubg............same
Sticky situwation
Flex glue wins automatically
*It works underwater*
*And it even dries underwater*
u cant start one later because the other one failed at 30. it failed at 30 with all the other weights added, u gotta start from the beginning with both. love the videos but it makes more sense
Tyler it’s my first video watching you but I already love your videos and ur such a positive guy. Your getting close to 50k congrats
7:15 bug on bottom right of the table
Very good information
3:17 NOW THAT'S A LOT OF DAMAGE
30 + 30 + 30 = 150? I think you need another edit for that one. That's not 3 times better, that's a whole 5 TIMES better.
i dont math
@@TylerTube same
Flood: exist
Flex Glue: hold my beer
丂乇乇尺 Phil Swift: *AND IT EVEN WORKS UNDERWATER!*
Ooo yes i genuinely got excited for this video
The ending is the best thing I've seen in a while haha , so funny!!!
th-cam.com/video/zJ90f_2PkK0/w-d-xo.html
Gorilla Glue on Hair
use both for maximum power!
Y3s
Isn't this channel just amazing? I'm starting to get *glued* to these videos
Lol three weeks ago Tyler was at 17k
Lol that outro, good shit man. This is probably my new favourite youtube channel.
R.I.P Mr Stoned Table
Plot twist: the brick broke and not the part where the glue holds the bricks.
but can it hold my heart together?
don't play horror games for jump scares. glue bricks together and place weights on top of them, and when they snap NOW THAT'S A SCARE
Mah gawd, an angel from heaven only here to test glues.
Don’t think a sledge hammer would be the way to go. That just broker the bricks. That doesn’t show the weight it can take
Test Flex Shot next!!
Yeeeeessssss
Gorilla tape vs flex tape vs scotch tape.
Gorilla glue: 30
Flex glue: 150
Tyler: 8:37 so flex glue made it 3 times better...
Maths be like BRUH
That moment where he used the sledgehammer the brick broke, not the glue. This stuff needs to be used in everything
*I sAWwEd ThiS boAT iN haLf*
The glue and stack of bricks was really cool. Good demo of what happens when you spread the weight out over a large surface area.
8:24 did anyone else notice that big in the lower middle part of the table?
bug*
If your starting at 45lb with flex glue then its not the same conditions. Going in weight increments is kinda putting stress on the glue and could be slowly separating it.
Tyler is stronger than his car
They're bricks, and he's hitting a concentrated spot. His car was spread out, and no force.
Yes, I know this was a joke.
I think the flex glue was weaker when holding together the ttubing was because it might not be designed to stick metal together
Damn that 1x1 square thing was a good idea.
EMAN00619 indeed
I got a Gorilla Glue ad lol
Who came here after finding out the girl that used gorilla glue on her hair
Yessir
0:26 *aNd LeT eM dRy...*
Phil Swift: yeah that's what he said
5:14 he gets scared and backs away XD
He looks like a shy kid
If you read the instructions for gorilla glue you have to wet the surface with water and then put the glue on to activate it.
Nah fam that Elmer’s glue is waaaaay stronger than those
make a video showing which one is better to use as a HAIR SPRAY ALTERNATIVE
Lmao im dead
shut the fuck up.
Thanks Tyler! I was looking to buy Flex Glue or Super Glue. This video helped me out man...great video!
Thanks for doing this.im mounting a fiah finder transducer " 3lbs" to the back of my boat with flex glue.looks like it will be ok!
You look like Kerry King with those "safety glasses".
Flex fan for life!!!
3:00 Oh my, that scared me. Great Video! I luv it!
The dislikes were from flex glue
I support you, keep on doing what you do and don’t let any haters stop you.
Thank you so much this video helped a lot
I’ve been waiting for this for so long
Thank you. Going to get the flex glue for my chair
Mix the flex glue and the gorilla glue to make it so powerful
The dark distorted voice was a nice touch 😂
On the flex glue one inch square strength test. The chain slipped and ment the glue was taking more weight/ downward force as the weight accelerated toward the floor as the chain slipped. And once the weight stopped it wrenched the glue apart. Unlike the gorilla glue which was was gently tested and pulled apart.
A lot of you in the comments suggested putting a car over it.
*SO I'M GONNA PUT MY TRUCK AND SEE IF IT STILL HOLDS*
Well obviously the bricks didn’t break with the back of your truck. As Phil Swift said...
*IT HOLDS **_OVER A THOUSAND POUNDS_*
I honestly think the little snap at 5:01 puts a little too much pressure on the flex glue.Causing it to detach quickly
5:07 when Patrick finally knows where the falling planks are coming from
As you said there was still brick left ln the flexglue when you hut it with the sledgehammer. This would presumably put the failure point on the bricks, not the flex glue, therefore making it an inconclusive test regarding the strength of flexglue
Gorilla glue is cures with H20, the instructions tell you to rough metal surfaces and then dampen. Not familiar with flex glue but would be interesting to retry this expirament but follow the instructions on both products.
Tyler tests the product, not the instructions
Did anyone realise for both of the brick stacking tests he was in the middle of saying "I hear something" and then it just collapses