Holley Pro Dash 12.3 - Create Analog & Digital gauges on a new background

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 5

  • @ONEG360
    @ONEG360 2 หลายเดือนก่อน

    Thanks!

  • @chrisbennett293
    @chrisbennett293 หลายเดือนก่อน +1

    Unrelated but do you have a video showing where you mounted the Dominator ECU? Just trying to get ideas on harness routing.

    • @TurboMalibuV6
      @TurboMalibuV6  หลายเดือนก่อน

      I don't have a video but here's how it's run. I made a mounting bracket for the ECU that bolts in the same place as the screws on the glove box door. The bracket extends towards the firewall underneath the A/C case at a slight angle. The connectors on the Dominator are facing towards the rear of the car. The harness comes out of the Dominator, circles towards the transmission tunnel, then loops around behind the ECU. Then they go towards the passenger kick panel and out of through the firewall in the OEM location. I have a 4L80e in my car and ran the J4 connector towards the steering column and out of the OEM speedometer cable hole and down to the transmission. I plan to make a short "curtain" that will cover the connectors on the ECU when you look down at the passenger footwell.

  • @floydharrington9365
    @floydharrington9365 หลายเดือนก่อน

    where do you go to download backgrounds to load onto the dash ?

    • @TurboMalibuV6
      @TurboMalibuV6  11 วันที่ผ่านมา

      Search Facebook for them.