Turbo Malibu V6
Turbo Malibu V6
  • 53
  • 981 665
Holley Pro Dash 12.3 - Create Analog & Digital gauges on a new background
This video assumes that you have acquired or created an ALL-NEW background for your Holley Pro Dash. Once you have one loaded on a USB drive, you can follow this video to set up the gauges on it.
มุมมอง: 105

วีดีโอ

What's on my Holley Pro Dash 12.3"
มุมมอง 17821 วันที่ผ่านมา
I go through all the different dashboards on my car showing the way I have them set up. #holley #prodashboard #holleyefi #gbody
Turbo Malibu
มุมมอง 2552 หลายเดือนก่อน
#malibu #turbocharged
Dual Fuel Injected Buick Grand National Engine
มุมมอง 1553 หลายเดือนก่อน
Way back in 2004, I designed a dual fuel system for my car. I designed it to automatically switch from 87 octane pump gas to 116 high octane race gas. It's a system that does not allow the fuels to mix. Forget high dollar aftermarket ECM's....this can work with factory ECM's regardless of the engine size. It still works flawlessly after all these years. Video of it switching... th-cam.com/video...
Turbo Malibu on Cruise Control
มุมมอง 853 หลายเดือนก่อน
Turbo Malibu on Cruise Control
PADDLE SHIFTERS - G-Body with a 4L80e Transmission & Holley Dominator ECU
มุมมอง 2233 หลายเดือนก่อน
DETAILED INSTALL HERE - www.turbomalibu.com/malibu-paddle-shifter.html Here's a short, to-the-point video about how I made paddle shifters to work on a stock steering column. This is a mid-80's GM steering column on a G-Body car from 78-88. I'm sure other GM columns are exactly the same so this procedure will still work as long as your steering wheel has enough room on the back side of it to al...
HOLLEY Pro Dash - How to set up SHIFT INDICATOR POSITIONS.
มุมมอง 3005 หลายเดือนก่อน
Follow this easy software set-up procedure to get them working. A 0-5V sensor must be installed on your shifter or on the side of your transmission.
4L80e - G BODY SWAP - How to Column Shifter Linkage Set up
มุมมอง 6125 หลายเดือนก่อน
Here's my solution for hooking up a column shifter to a 4L80e in a G-Body. #gbody #4l80e #montecarlo #grandnational #cutlasssupreme #grandprix #malibu
Holley Dominator Dual Boost Solenoid Response
มุมมอง 418 หลายเดือนก่อน
This DEMO shows the responsiveness of the wastegate solenoids controlling *commanded* dome pressure. I have it set up using the throttle position sensor to increase and decrease the pressure on top of the wastegate. A steady 100psi of air pressure is coming from a C02 tank. You will not be using a *commanded 100psi* of dome pressure to control 20 pounds of boost in your engine. I'm using 100psi...
1978 Malibu - Turbo Intercooled V6 - Rear View
มุมมอง 302 ปีที่แล้ว
1978 Malibu - Turbo Intercooled V6 - Rear View
Wide Open Throttle
มุมมอง 9172 ปีที่แล้ว
Wide Open Throttle
Turbo Malibu V6 - 6.59 at 107mph - Dragy Pass
มุมมอง 2272 ปีที่แล้ว
Turbo Malibu V6 - 6.59 at 107mph - Dragy Pass
3800 V6 FAST START Ignition RETROFIT on a Grand National Engine
มุมมอง 1522 ปีที่แล้ว
3800 V6 FAST START Ignition RETROFIT on a Grand National Engine
Buick Turbo V6 with late model FAST START Ignition System
มุมมอง 1552 ปีที่แล้ว
Buick Turbo V6 with late model FAST START Ignition System
FAST START IGNITION on a Turbo Buick V6
มุมมอง 2963 ปีที่แล้ว
FAST START IGNITION on a Turbo Buick V6
Dual Fuel Injection - Automatic Switching - Turbo Buick V6 nudging 30psi of boost
มุมมอง 2724 ปีที่แล้ว
Dual Fuel Injection - Automatic Switching - Turbo Buick V6 nudging 30psi of boost
FYI - L5P Duramax MPG while EXHAUST REGEN is active. 75mph Cruise - 2019 Denali HD - 2500 4x4
มุมมอง 10K5 ปีที่แล้ว
FYI - L5P Duramax MPG while EXHAUST REGEN is active. 75mph Cruise - 2019 Denali HD - 2500 4x4
FYI - L5P Duramax MPG at different speeds - Not Towing - 2019 Denali HD - 2500 4x4
มุมมอง 6K5 ปีที่แล้ว
FYI - L5P Duramax MPG at different speeds - Not Towing - 2019 Denali HD - 2500 4x4
Vector Robot - No Music - No Editing - Just sit and watch what he does.
มุมมอง 7K5 ปีที่แล้ว
Vector Robot - No Music - No Editing - Just sit and watch what he does.
Snap On VERUS Wireless - Upgrade Your WiFi Card for FASTER SPEEDS!
มุมมอง 2.1K6 ปีที่แล้ว
Snap On VERUS Wireless - Upgrade Your WiFi Card for FASTER SPEEDS!
Snap On VERUS - How to install Windows 7 & Diagnostic Suite 17.2 on your older VERUS!
มุมมอง 20K6 ปีที่แล้ว
Snap On VERUS - How to install Windows 7 & Diagnostic Suite 17.2 on your older VERUS!
Snap On VERUS Wireless - 1 Minute Boot-up Into Diagnostic Suite using Windows 7 Embedded!
มุมมอง 5486 ปีที่แล้ว
Snap On VERUS Wireless - 1 Minute Boot-up Into Diagnostic Suite using Windows 7 Embedded!
Snap On VERUS Wireless - 90 Second Boot Up into Diagnostic Suite with Windows XP
มุมมอง 8696 ปีที่แล้ว
Snap On VERUS Wireless - 90 Second Boot Up into Diagnostic Suite with Windows XP
Snap On VERUS Wireless - 90 Second Boot Up into Diagnostic Suite - Windows 7 Ultimate
มุมมอง 4127 ปีที่แล้ว
Snap On VERUS Wireless - 90 Second Boot Up into Diagnostic Suite - Windows 7 Ultimate
[4K] Snap On VERUS Wireless - Windows 10 Pro - 24" Touch Screen
มุมมอง 4.8K7 ปีที่แล้ว
[4K] Snap On VERUS Wireless - Windows 10 Pro - 24" Touch Screen
Snap On VERUS Wireless with Windows 7 & Windows 10 installed
มุมมอง 5K7 ปีที่แล้ว
Snap On VERUS Wireless with Windows 7 & Windows 10 installed
Damn! That KUKA is fast! - 55 Seconds from start to finish
มุมมอง 25K9 ปีที่แล้ว
Damn! That KUKA is fast! - 55 Seconds from start to finish
1978 Turbo Malibu - DYNO 555HP 517TQ
มุมมอง 7039 ปีที่แล้ว
1978 Turbo Malibu - DYNO 555HP 517TQ
1978 Turbo Malibu - DYNO 600HP 530TQ
มุมมอง 8129 ปีที่แล้ว
1978 Turbo Malibu - DYNO 600HP 530TQ
1978 Turbo Malibu - DYNO 580HP 579TQ
มุมมอง 4919 ปีที่แล้ว
1978 Turbo Malibu - DYNO 580HP 579TQ

ความคิดเห็น

  • @donnyhaines1871
    @donnyhaines1871 5 วันที่ผ่านมา

    Can I buy one of these please?

  • @itskamel
    @itskamel 12 วันที่ผ่านมา

    Is this possible to do straight to the Pro Dash?

    • @TurboMalibuV6
      @TurboMalibuV6 12 วันที่ผ่านมา

      Yes. The dash has a 5V supply and a sensor ground. You can configure the input on the dash itself using input io.1 through io.13. Just scale the sensor in the settings like in the video. Then you can make a gauge to show on the dash.

  • @ONEG360
    @ONEG360 14 วันที่ผ่านมา

    Thanks!

  • @nz715
    @nz715 14 วันที่ผ่านมา

    Video on how you setup the sensor?

    • @TurboMalibuV6
      @TurboMalibuV6 14 วันที่ผ่านมา

      th-cam.com/video/wQzRWogXpeg/w-d-xo.html

    • @TurboMalibuV6
      @TurboMalibuV6 14 วันที่ผ่านมา

      1:20 also shows you what the settings are for setting up the INPUT in your ECU.

  • @seanadams9924
    @seanadams9924 16 วันที่ผ่านมา

    Nice Camera work.

  • @parsnipdream
    @parsnipdream 18 วันที่ผ่านมา

    My grandfather is rolling in his grave laughing at you new age country people with your fancy pants truck. bet it even has an espresso machine.

  • @seanadams9924
    @seanadams9924 26 วันที่ผ่านมา

    That is Awesome!!!

  • @gregzmanson
    @gregzmanson หลายเดือนก่อน

    Very smart and clever way to add paddle shifters to an G-body..

    • @TurboMalibuV6
      @TurboMalibuV6 หลายเดือนก่อน

      I'm an expert at over-complicating stuff with additional costs and labor to get things to work like I want. I should stop thinking out-of-the-box so much. 😅

  • @maradallibya5791
    @maradallibya5791 หลายเดือนก่อน

    Does the relearn free or not on this tool I ve bought a used verus edge 23.2 And when i tried to do the relearn function its asked for wifi connection And i could not connect and the massage Restrict appeard

  • @MarkVanWey
    @MarkVanWey หลายเดือนก่อน

    You are not a "car guy". You are an automotive artist.

  • @michaelchambers9971
    @michaelchambers9971 2 หลายเดือนก่อน

    Brilliant !

  • @District_57_Toastmasters
    @District_57_Toastmasters 2 หลายเดือนก่อน

    Smooth, man. Always liked the looks of this car

  • @212rain
    @212rain 2 หลายเดือนก่อน

    Cool car. What is it?

  • @wattsperformance
    @wattsperformance 3 หลายเดือนก่อน

    This is sooo cool!

  • @caplife3558
    @caplife3558 3 หลายเดือนก่อน

    One of a kind special built not brought car.

  • @caplife3558
    @caplife3558 3 หลายเดือนก่อน

    Whats your plans with her now? Do you take it to car shows ?

    • @TurboMalibuV6
      @TurboMalibuV6 3 หลายเดือนก่อน

      I've done a few car shows with it when I restored it back in 2005. It's showing it's age now as far as how clean it is. I'm doing a drivetrain upgrade at this time. Engine and transmission. Hope to get upwards of 800hp to the rear wheels. That's not a lot by today's standards...even with a turbo V6.

  • @caplife3558
    @caplife3558 3 หลายเดือนก่อน

    You got me inspired to build something like your car , came across your video a while ago when your parents were driving with the turbo 6 in it . Nice to see you still have it

    • @TurboMalibuV6
      @TurboMalibuV6 3 หลายเดือนก่อน

      That was long time ago. I've had the car since 1986. It's been though some good times and some bad.

  • @michaelbradley1137
    @michaelbradley1137 4 หลายเดือนก่อน

    I just popped a chub! 😍

  • @GodlikeGTZ
    @GodlikeGTZ 4 หลายเดือนก่อน

    Holy shit! Nice setup

  • @dandan821
    @dandan821 4 หลายเดือนก่อน

    Can I still update the software with out changing the windows because the windows can’t be changed to windows 7 or 10 so all I’m asking can the software be updated to 17.2 with out changing the windows?

    • @TurboMalibuV6
      @TurboMalibuV6 4 หลายเดือนก่อน

      No. The only way I've heard is if one of the old dealers didn't sell a copy of the 17.2 with the REQUIRED key. There could be someone out there in the software programming field that could hack the software and not require the key to install.

    • @hotpackjay
      @hotpackjay หลายเดือนก่อน

      @@TurboMalibuV6unlikely, snap ons cryptography methods and embedded security measures are pretty damn tight. Remember, they charge the most. They can afford to have beefed up security. If your tools already bricked I don’t see why trying isn’t an option!

  • @TurboMalibuV6
    @TurboMalibuV6 5 หลายเดือนก่อน

    I can't believe I have 14K views on this video. There's literally no content in it other than me going around in circles. However, when I posted this video 11 years ago, Google was paying me for placing ads on it, so I did get some money out of posting it. Since then, Google took the revenue away from us unpopular channels so I make no money at all on any of my video's anymore due to "lack of subscribers". Companies like to "hook you" and reel you in when they're a growing business and when THEY'RE in need of customers. Then, when they reach their goal, they cut the little guys off. Rant over.😁

  • @joefair3391
    @joefair3391 5 หลายเดือนก่อน

    How did you get the OBD2 engine to play nice with the OBD1 car?

    • @TurboMalibuV6
      @TurboMalibuV6 5 หลายเดือนก่อน

      I used a 1999 Pontiac Bonneville SSEi as a complete donor car. It's using an OBDII ECM from the Bonneville. I took the entire drivetrain out of it (including the OBDII engine wiring harness) and adapted the harness to the LeSabre under-dash harness.

    • @joefair3391
      @joefair3391 5 หลายเดือนก่อน

      @@TurboMalibuV6 that makes sense. I hate electrical work, otherwise, I have an itch to L67 swap a GM A-Body. Ideally an AWD Pontiac 6000.

  • @irvingferginspud2070
    @irvingferginspud2070 6 หลายเดือนก่อน

    I have this exact model. Over the years I have had to replace the starter twice, The gear at the bottom of the steering shaft (because I left it in the weather and didnt grease it) re-attach the wiring to the PTO because i let it get tangled in the belts.. three batteries. and now the Differential is making a popping sound it reverse. I think its jumping teeth. Oh im still on the original drive and deck belts. And The Kohler engine starts easy never had a moments problem with it.

    • @TurboMalibuV6
      @TurboMalibuV6 6 หลายเดือนก่อน

      The popping you're hearing is the reverse engagement coupling. The tips of them get rounded off and then it will slip out of the mating coupling and then re-engage in the next groove. That's the pop you're probably hearing. I took a die grinder and shaved them both enough to remove the rounded edges. Also, the forward one also needed the same thing done in mine. On top of that, they really don't engage very deep anyway. I still have my mower but I only use it to tow my utility trailer around the yard.

  • @tyreegreen1496
    @tyreegreen1496 7 หลายเดือนก่อน

    👍

  • @ClutchKickerNation
    @ClutchKickerNation 7 หลายเดือนก่อน

    cant download the win 7 17.2 starter file any chance you could uploade a new link

    • @TurboMalibuV6
      @TurboMalibuV6 4 หลายเดือนก่อน

      drive.google.com/drive/folders/12-nxEfjC5ULZoRpQWHbcL_1faWn-Qnll?usp=sharing

  • @austindove2320
    @austindove2320 8 หลายเดือนก่อน

    Where did you get those rims? With the spinners?

  • @WiPri0371
    @WiPri0371 9 หลายเดือนก่อน

    I used to work at Michelin. We had these exact same robots in operation before I left. But it wasn't for anything but repetitious motion. They cleared out a whole dept. Went from 25+ ppl to less then 5. Yay progression. 🤨

    • @ElvargMovies
      @ElvargMovies 8 หลายเดือนก่อน

      Which Michelin Plant? In Germany?

    • @WiPri0371
      @WiPri0371 8 หลายเดือนก่อน

      No. In the States.

  • @markhellman-pn3hn
    @markhellman-pn3hn 10 หลายเดือนก่อน

    it barely looked good on a Monte ... this car is 100% HORRIBLE !!!

  • @johnnysprocketz
    @johnnysprocketz 10 หลายเดือนก่อน

    DOPE

  • @mrcease211
    @mrcease211 11 หลายเดือนก่อน

    Can you do a video where you hit the gas so we could hear that baby purr?

  • @PInkSlipMyGSXR
    @PInkSlipMyGSXR ปีที่แล้ว

    Bro I actually drop a tear when I seen this bike,I have a similar looking one,not as nice but still clean!

  • @kalshark2917
    @kalshark2917 ปีที่แล้ว

    Is something wrong with your server I have downloading your verus img on different devices and networks and can never get over 5gb until it fails ?

  • @nathanwalden224
    @nathanwalden224 ปีที่แล้ว

    Does anyone have a license for a Verus Pro? Version 16.2.1 or later. I upgraded, and I guess the program they have on their website to update diagnostic suite doesn't update the license file, so I'm having problems with updating the OS

    • @TurboMalibuV6
      @TurboMalibuV6 ปีที่แล้ว

      You can't use anyone else's license on your Verus for Diagnostic Suite. You'll have to use your original license to activate the version that your Verus originally had.

    • @nathanwalden224
      @nathanwalden224 ปีที่แล้ว

      @@TurboMalibuV6 The version I originally had was 15.4 I updated to 16.2.1, but the license is still for 15.4 Have you ever tried rolling back? I've tried a few things but no luck

    • @nathanwalden224
      @nathanwalden224 ปีที่แล้ว

      @@TurboMalibuV6 any ideas? Not trying to bug ya, just curious what you had tried before.

  • @baileyscream4044
    @baileyscream4044 ปีที่แล้ว

    has anyone got a link for the image and files as nothing opens when i click on the links

    • @TurboMalibuV6
      @TurboMalibuV6 ปีที่แล้ว

      I've got the files in a ZIP folder that you can download directly from the link I provided in the description. You can RIGHT CLICK on the link and select SAVE LINK AS. After you hit SAVE, you might have a pop-up if you're using Microsoft Edge browser. If you do see it, it may say the file is unsafe. Just hover your mouse over the file and select KEEP....and then select KEEP ANYWAY. The file will start downloading. That's how I just downloaded it. The Licenses that are in the download WILL NOT work on YOUR VERUS.

    • @TurboMalibuV6
      @TurboMalibuV6 4 หลายเดือนก่อน

      drive.google.com/drive/folders/12-nxEfjC5ULZoRpQWHbcL_1faWn-Qnll?usp=sharing

  • @BehzadEghtesad
    @BehzadEghtesad ปีที่แล้ว

    thanks for this video. i was going to buy a Verus D10 20.2 updated today ( for 1Kbox) after i scan my car and showed codes, to go forward each code had FIX IT botton and was forced to connect to web using a QR code but we did not have wifi that area. Q. the snap-on must be connected to WIFI for full scan functionality? 2. to use the tool we have to subscribe of snap on? how come some older models just work without wifi and no subscription as i see in shops around.

  • @BehzadEghtesad
    @BehzadEghtesad ปีที่แล้ว

    dose the D10 works on Win 10 too?

  • @CodaCM
    @CodaCM ปีที่แล้ว

    I just got a Neato VS Signature off for Mercari, I’m hoping it will arrive later this week. (I’m hopping by friday feb third. I probably will make a test between my Roomba 880 and it. I have been looking for a new one for a wile sense my D85 stopped powering on last year. (2022) I will try to add updates to this. If I forgot, just send a reply to this comment so I will remember.

  • @ironbuster
    @ironbuster ปีที่แล้ว

    Great Idea! Do you have a part number for the Blocking Diodes used?

    • @TurboMalibuV6
      @TurboMalibuV6 ปีที่แล้ว

      I used IN4002. This system was installed back in the mid 2000's. I've never had any to go bad and it's still working perfect after all these years. They are located at the rear of the engine in a wire harness getting all the heat possible from the engine compartment.

    • @ironbuster
      @ironbuster ปีที่แล้ว

      @@TurboMalibuV6 Thanks, going to try and duplicate it on a V8 Application

  • @anthonychisolm679
    @anthonychisolm679 ปีที่แล้ว

    NICE AF. But there's no way in hell that I'm doing all this to my Bike because I'm just building mine's for my weekend entertainment, HP AND SPEED. Not all this extra SHHHH! Just gonna slam it, stretch it much further out than this short extension right here with the BIG FAT 300 TIRE KIT on it and do the other workings on it and that's a wrap after that #2001SUZUKIGSXR1000👍🏽 👌🏽

  • @tmedocianis
    @tmedocianis ปีที่แล้ว

    If you had done "UPGRADE" instead of trying to do a fresh install, all of your buttons would work!

  • @ariccze
    @ariccze ปีที่แล้ว

    anyone successfully upgrade to a faster WIFI card (replace hardware) under windows 7 ??? that would be a great benefit to updating the OS.

    • @TurboMalibuV6
      @TurboMalibuV6 ปีที่แล้ว

      th-cam.com/video/zSZ5Z4rBL7g/w-d-xo.html

  • @saesae4175
    @saesae4175 2 ปีที่แล้ว

    How can I give you my phone number or is there an email I can use

  • @saesae4175
    @saesae4175 2 ปีที่แล้ว

    Hi I have a few questions about upgrading how can I get in contact with you p.m. maybe

  • @saesae4175
    @saesae4175 2 ปีที่แล้ว

    Question I know you did a scanner long time ago upgrading windows is it possible that you can help me with mine

    • @TurboMalibuV6
      @TurboMalibuV6 2 ปีที่แล้ว

      What model scanner do you have? Mine is a EEMS-325. If it's anything other than that EXACT model number then I can't help.

  • @devindraranjitsingh3696
    @devindraranjitsingh3696 2 ปีที่แล้ว

    where can I get the lighted Suzuki emblem?

  • @deepcreep9849
    @deepcreep9849 2 ปีที่แล้ว

    Racing toward the beautiful sky. Nice.

  • @MarcusOrciuch
    @MarcusOrciuch 2 ปีที่แล้ว

    nice pull

  • @kflorence7005
    @kflorence7005 2 ปีที่แล้ว

    Gawd daum that shit moves

  • @IntenseVLT
    @IntenseVLT 2 ปีที่แล้ว

    Why was this recommended to me?! Enjoyed it anyway!

  • @theProtocaster
    @theProtocaster 2 ปีที่แล้ว

    Why so slow? 👀👀 hope that was on a private road. Lol