Wow, the new line up of automotive tools coming out is amazing. Retired military mechanic with 21 years of experience in diesel maintenance on heavy equipment. The cordless impact guns, the ratchets, die grinder, and the hand tools with sockets design with anti-roll technology built into them is amazing. I am particularly excited about the ratchets with the extended necks and the die grinder. To have one with no air hose or the need of an air compressor just opens up the versatility of utilization tremendously. A lot of times because of those pesky air lines you were force to remove an entire housing to conduct repairs, but now with this cordless die grinder the possibilities and flexibility to conduct repairs on sight has just been multiplied. I kind of wish the home depot's would carry in store the mechanics hand tools, so that you can see them and get your hands on them. For sure the stubby cordless impacts in 1/4, 3/8, and 1/2 will be put on my to get list as well as the die grinder. Thank you for an amazing video and to allow us to be with you through this video at the Milwaukee TSP. Very Respectfully, Carlos.
milwaukee is stepping it up with the new automotive service tools... dewalt has no NPS or new tools coming out every year.....they have the same boring stuff year after year...this is why milwaukee is leading the industry and selling more tools 👍
I just did a ball joint and tie rod end on my work car..I primarily use my tools in automotive applications.. ( Hobby- DIY stuff)...I have these Milwaukee combination wrenches and ratcheting combo wrenches... Love em... so much I gave my co-worker all of my previous wrenches.. ~$300 worth of Gearwrench and Tekton. .. Fairly new wrenches... As far as combo wrenches the Milwaukee are my go-to now... they've got a great automotive tool line.. Thanks Vince for the "behind the scenes". ..🔧
My grandfather used to go on long rants about how awesome Milwaukee was. Looks like my future grandson will be hearing me continue that tradition. I got on the bandwagon this year with several M18 fuel tools and picked up the M12 stubby.
Funny I have over 40 grand in snap on tools...never paid this fake interest you made up. Senior master ford tech and only had issues with a couple breaks over the years that have been handled by the tools warranty and never damaged a customers car with cheap tools breaking because I never bought cheap shit and pretended it was better than the quality tools.
Great to see Milwaukee making wrenching faster and easier!! That's a technician's job, FAST and EASY!!😂🎉 They be crushin it in the construction tools!!😂
One more year and about 80% of my air tools are going out the window But i think is going to be a few more years before they can retire my air hammer... lol
A lot of the tool trucks in my area have a full inventory of Milwaukee tools. I heard Mac Tools sends mystery shoppers to the tool trucks to see if the franchisees are selling off brand stuff.
I really like that die grinder and the 1/2" drive impact gun. I have a pneumatic angle die grinder that works ok but hauling that air hose around is a pain. I also have an older DeWalt DCF 820 18V 1/2" drive impact gun that is almost worn out and batts are very expensive to replace so that Milwaukee 1/2" impact gun is def on my need list when it comes out. Thanks for sharing. Cheers!
Milwaukee also has an awesome M18 Fuel Die Grinder that's been out for a while now & it's Sweet ... Can't Wait to get my hands on the new M12 Fuel die Grinder though ...
Im a mechanic by trade and what I need is to be able to undo really stubborn bolts in tight spaces. That Impact wrench looks Legit! Im thinking more like 150mm length max and 900NM of torque, I know you dont understand that in America but I dont know the conversions. Also Angle grinders for tight spaces Milwaukee Fuel 115mm M18 is class leading
Grate line of tools !!!! I do have a ton of DeWalt tools ,,but very rarely anything new, and I have seen a few new Milwaukee tools I would love to grab !!!!! Maybe I have a change in tool brand coming up soon !!!!!!!!
That die grinder is cool, 25,000rpm is a lot. I have the Milwaukee M12 12-Volt Lithium-Ion Cordless Variable Speed Polisher/Sander which runs at 2800rpm for the polisher speed and 8,300rpm for the sander speed. Granted it's not 25,000rpm but at 8,300rpm it does a great job of sanding!👍
Those new sockets and wrenches look great! I love that torque wrench too, but I havent a clue how I could justify purchasing one lol maybe if I change professions then I'll look into it Haha. Same deal with the M12 Rivet Gun, I want it, but have no real use for it yet and itd just collect dust instead of making me money lol great job VCG. Also, special thanks to Nick for editing these videos! I did 4 years of video editing (For school and personal projects) I know it's not easy and often is under appreciated. Rock on my man and I'll catch you on the next one.
That reactionless ratchet is really cool, my standard Milwaukee M12 3/8" ratchet doesn't have that feature, I do have an air ratchet with that feature and it is awesome it sure as heck saves your knuckles from getting busted!
Wow over 90K already! Silver Play Button on the way dudes. I just got your latest comment, but it disappeared? Either way, thanks for checking out the vid! Only reason I haven't been lurking with the Very Cool Gang more lately is I'm too broke for the new tools and trying to get these cars moving fast!
@@VCGConstruction Yeah! Really strange. If I go to it from the studio app it just says "This comment is no longer available." Must be the DeWalt execs paying off TH-cam. ;)
They need comfort grip on ratchets and breaker bars, locking flexhead ratchets! 1/2 tq wrench isn't enough at 150ftlbs max. Should be 250ftlbs. U can get a gearwrench digital tq wrench for 150$ Precision Instruments split beam with thumb dial 165$ They missed the mark at 150ftlbs for 599$
The price is high and even though they say it obviously can be used for automotive work, like Vince said in the video, it was designed for other fields. Not really for automotive work.
@@fattygamer94 stop it! I dont see the flat rate master and all the other auto guys that were invited torq solar panels. Dont try to answer something u dont know
@darkjedi351 snap on is over priced on tq wrenchs. The gearwrench digital does Tech angle also. For half the price as a standard tq wrench Milwaukee made
if they have these tools about 2 years ago, then I won't be paying high price for snap-on, I got my M12 3/8 Impact driver, love it, way better than any other brands out there.
Torque wrench is sweet but theres a couple things i would want it to have before i buy it. First would be to have a range of up to 250 or more ft. Lbs. No way im spending 100s on a wrench that cant be used for every job. Second would be a flex head, personal thing i really like flex head torque wrenches, they make a huge difference in accessability
@@juliogonzo2718 good question, the just need to build a smaller electric jack hammer. An air hammer is just an air operated version. We would like one that is smaller and accepts our automotive air bits. Milwaukee already built the cut off tool in the M12 line
@@jeffgenchi5863 I watched a video on a Bosch electric jackhammer after, it had a piston on a crankshaft driving another piston that was the hammer. I wonder if it could be made as small as an air hammer and have as much force? I might look at the cutoff wheel it would be handy if it's a 4" one. One of those and some cordless hydraulic rebar shears would be a burglars dream lol. I'm not a burglar by the way
That note about the torque wrench not being developed for automotive use is important. Obviously you can if you want but they may design the next gen one to be more automotive friendly with high torque settings and angles.
Question about the Milwaukee torque wrench. Does it have an angle mode on it like my matco torque wrench? I deal with head bolts that require being torqued to spec (say 55 ft/lbs) then go back and add 90° to each bolt. My matco has this function built in so i dont have to get out an angle finder or mark the bolt and check it. Just set it to angle mode, set my spec, and start turning and it beeps when i hit the spec. Not trying to flex matco, but would be nice if the milwaukee has this as well.
Can you make the m12 grinder with the quick chuck like the impack driver, with the hex bit shaft,, so i don't have to have a tool to change the wire brushes or sanding pads and do the moto tool with the 1/8 and 3/32 in hex shafts please, and you can make the circular saw and cutoff tool with cam lock blades so you can make them tooless tool changes and you guys will finally be getting out of the dark age tools and a pencil grinder that is m12 battery that has wired cord to the grinder and make a belt clip holder for the battery and make it tooless tool change, please thank you and keep up the good work !!!!
I got the m12 3/8 ratchet and its wicked then i bought the 3/8 stubby m12 and its perfect for my needs i switched over to pack out and im going to retire my mastercrap ratchet and socket set for the milwaukee full set thats packout ready.
Super excited for all of the new tools coming out. I have only one gripe though. I really wish they’d develop an m12 ratchet with the pass through style sockets. The gearwrench pass through sockets are the same as the craftsman ones, and like others as well. So pass through sockets have become a standard in their own right. As of now, craftsman has made the c3 max axess cordless pass through ratchet, but this was years ago. One of the main tool companies are going to eventually bring this idea back from the dead and reintroduce it to the market with updated brushless and battery technology, and I’d really be bummed if dewalt or makita did it. Someone who knows anyone at Milwaukee, please pass this up the chain?!
I really hope Milwaukee will come out with the electric torque wrench that does angle torque. I'm pretty sure every BMW tech would want to have one. Pretty much all bolts are torque to yield
I'm going to try that 1in impact. If it stands up to the punishment it will get in an oilfield repair environment, it will take whatever else you can throw at it. I will let you know. P.S. I'm real hard to impress, if it won't work and hold up, it can't stay!
Great tools, but the guy in the beginning needs more than a simple dust mask when grinding on aluminum. You definitely need a ventilation system and a respirator.
Id love to know what the warranty is on there hand tools. Are they marketing to compete with matco and snapon or is this more for the home diy guys. Also if they wanna sell that torque wrench to mechanics 250ftlbs would be my minimum and I would also like to know if they do angle torque as well as if it does newton meters.
Same here! And the torque wrench for my ATV motor rebuilds. Yeah its overkill but soooo damn cool! Lol I have soooo many m12 tools but not all and I cant keep up! They keep popping out with something new!
I think they are shooting themselves in the foot on the 1/2 in torque wrench. I get it it's only a 12v ratchet but just about every other 1/2 in torque wrench goes to 250-300 ftlbs
Milwaukee has continued innovating. I've been in the electrical trade for 20 years. I've watch as contractors move from dewalt, to Bosch, and now Milwaukee. They dont even bother with dewalt any more. Bosch still has great tools that fill in the gaps Milwaukee hasnt covered or they just still have the tool that wont die. I'm currently getting away from dewalt in my personal tools, and moving to Milwaukee.
i have been so waiting for a cordless die grinder. im almost 100 percent away from air!!! i know theres times i have to use it but i hate it! idk about the sockets id prefer a super shallow set for these fwd cars. been doing this 39 years and its getting harder on me so any thing that makes it easier and faster im all for!!!! i see the die grinder and 1 inch in my future!!!! i love the fuel line!!!!
Man i wish they would think about beefin up their bigger impacts with some kind of ip rating. I work in the oilfield and constantly have to worry with water, dirt, or mud with my gun and thats really the only thing that kills em out there. Maybe this might be doable in the future
FFS! I just dropped $700 on my SnapOn Torque Wrench! I'm still needing an M18 fuel Monobolt Gun though. The M12 rivet gun is awesome. I use that thing almost everyday. All I do is work on 53' trailers. Please, please, PLEASE Milwaukee I really need an Monobolt gun!
Wow, the new line up of automotive tools coming out is amazing. Retired military mechanic with 21 years of experience in diesel maintenance on heavy equipment. The cordless impact guns, the ratchets, die grinder, and the hand tools with sockets design with anti-roll technology built into them is amazing. I am particularly excited about the ratchets with the extended necks and the die grinder. To have one with no air hose or the need of an air compressor just opens up the versatility of utilization tremendously. A lot of times because of those pesky air lines you were force to remove an entire housing to conduct repairs, but now with this cordless die grinder the possibilities and flexibility to conduct repairs on sight has just been multiplied. I kind of wish the home depot's would carry in store the mechanics hand tools, so that you can see them and get your hands on them. For sure the stubby cordless impacts in 1/4, 3/8, and 1/2 will be put on my to get list as well as the die grinder. Thank you for an amazing video and to allow us to be with you through this video at the Milwaukee TSP.
Very Respectfully,
Carlos.
Thanks very much Carlos we appreciate you!!
YOU DO KNOW THAT THEY DO HAVE AN M18 FUEL DIE GRINDER ALSO RIGHT ... LOL....
@@rlshipley96 but it's not like the m12 version
@@Iroc_twan True , Cant Wait to get it Myself Cuz ...
anti roll technology hahahah as if they just discovered that square things dont roll away
milwaukee is stepping it up with the new automotive service tools... dewalt has no NPS or new tools coming out every year.....they have the same boring stuff year after year...this is why milwaukee is leading the industry and selling more tools 👍
We’d love to go to a DeWalt new product launch!! These new 12volt tools look promising!!
@@VCGConstruction good luck with that....dewalt will never have a new product launch event like milwaukee does
kingofthecrease30 that’s because Dewalts automotive section of tools is known as Mac tools
@@VCGConstruction
Please, review BOXO tools and boxes.
I just did a ball joint and tie rod end on my work car..I primarily use my tools in automotive applications..
( Hobby- DIY stuff)...I have these Milwaukee combination wrenches and ratcheting combo wrenches... Love em... so much I gave my co-worker all of my previous wrenches.. ~$300 worth of Gearwrench and Tekton. .. Fairly new wrenches... As far as combo wrenches the Milwaukee are my go-to now... they've got a great automotive tool line.. Thanks Vince for the "behind the scenes". ..🔧
My grandfather used to go on long rants about how awesome Milwaukee was. Looks like my future grandson will be hearing me continue that tradition. I got on the bandwagon this year with several M18 fuel tools and picked up the M12 stubby.
Snap on doesn't even have brushless yet... Milwaukee out here killin the market in every tool category they dip into at a damn good price.
Yet dumbasses still buy for some reason
Hey now. $50/week at 24% intrest for the rest of your life is pretty good deal. 😂🤣
taylor Jams shiiit
Funny I have over 40 grand in snap on tools...never paid this fake interest you made up. Senior master ford tech and only had issues with a couple breaks over the years that have been handled by the tools warranty and never damaged a customers car with cheap tools breaking because I never bought cheap shit and pretended it was better than the quality tools.
They should come out with a M18 Keurig Machine for Jobsite Coffee breaks.
Mike Shea I would buy
I would buy a cooler that keeps things cool. But I guess that requires a mobile fridge.
Great to see Milwaukee making wrenching faster and easier!!
That's a technician's job, FAST and EASY!!😂🎉
They be crushin it in the construction tools!!😂
One more year and about 80% of my air tools are going out the window But i think is going to be a few more years before they can retire my air hammer... lol
This is great for people who work on their cars or trucks! 👍
So when do we get Milwaukee tool trucks lol
Probably the same time harbor freight has one.
That’s what I’m saying! lol
A lot of the tool trucks in my area have a full inventory of Milwaukee tools. I heard Mac Tools sends mystery shoppers to the tool trucks to see if the franchisees are selling off brand stuff.
Thanks Vince! The reviews and questions are very informative and helpful to those of us looking to use these tools within our careers.
I really like those flat sided sockets I have gotten sick and tired of chasing sockets down my drive way. Thanks for the video. 👍
Man what a serious push towards automotive on Milwaukee.
So awesome.. I almost wish I was still turning wrenches full time. I wish I had this technology 20 years ago.
I need all .Working with milwaukee tools is great.
Love your videos . Where is the best place to send you broken Milwaukee tools
They are making great things happen in the tool industry!
I agree
Because they (Milwaukee ) listen to what people want.
I Use to buy and use dewalt but after owning just a few Milwaukee power tools I have to say Im doing a complete switch over to all Milwaukee tools !
I really like that die grinder and the 1/2" drive impact gun. I have a pneumatic angle die grinder that works ok but hauling that air hose around is a pain. I also have an older DeWalt DCF 820 18V 1/2" drive impact gun that is almost worn out and batts are very expensive to replace so that Milwaukee 1/2" impact gun is def on my need list when it comes out. Thanks for sharing. Cheers!
Thanks William we appreciate it!!
Milwaukee also has an awesome M18 Fuel Die Grinder that's been out for a while now & it's Sweet ... Can't Wait to get my hands on the new M12 Fuel die Grinder though ...
Thanks you there jobs made easy now
Lord have mercy. I love Milwaukee tools.
Im a mechanic by trade and what I need is to be able to undo really stubborn bolts in tight spaces. That Impact wrench looks Legit! Im thinking more like 150mm length max and 900NM of torque, I know you dont understand that in America but I dont know the conversions. Also Angle grinders for tight spaces Milwaukee Fuel 115mm M18 is class leading
Beautiful beautiful beautiful 💓
Would love to get my hands on the die grinder. Would love the higher output tension wrench.
Grate line of tools !!!! I do have a ton of DeWalt tools ,,but very rarely anything new, and I have seen a few new Milwaukee tools I would love to grab !!!!! Maybe I have a change in tool brand coming up soon !!!!!!!!
Just got my 3/8” combination socket/ratchet set today, waiting for the 1/4” to show up. Now I need the big SAE and metric ratcheting combo wrench sets
Sweet cuz!!
Borescoped I was thinking about getting both of those sockets sets also. Did you order them from home Depot online..? Like $180 for both huh?
David Marks yeah, the 3/8 set when it was deal of the day, $75 off. And the 1/4” while it was $70
Borescoped alright man you scored! Just ordered both sets also. $194.00 it will be here on the 24th
Are they lifetime warranty like snapon?
That die grinder is cool, 25,000rpm is a lot. I have the Milwaukee M12 12-Volt Lithium-Ion Cordless Variable Speed Polisher/Sander which runs at 2800rpm for the polisher speed and 8,300rpm for the sander speed. Granted it's not 25,000rpm but at 8,300rpm it does a great job of sanding!👍
I was really hoping Milwaukee would announce a lawnmower to go with their yard tools.
Give us that mower to end all mowers Milwaukee!!!
Those new sockets and wrenches look great! I love that torque wrench too, but I havent a clue how I could justify purchasing one lol maybe if I change professions then I'll look into it Haha. Same deal with the M12 Rivet Gun, I want it, but have no real use for it yet and itd just collect dust instead of making me money lol great job VCG.
Also, special thanks to Nick for editing these videos! I did 4 years of video editing (For school and personal projects) I know it's not easy and often is under appreciated. Rock on my man and I'll catch you on the next one.
@darkjedi351 in the video they said 750 for the kit and I think 6 for bare tool
Milwaukee is killing it
That reactionless ratchet is really cool, my standard Milwaukee M12 3/8" ratchet doesn't have that feature, I do have an air ratchet with that feature and it is awesome it sure as heck saves your knuckles from getting busted!
I for sure want one of the M12 Fuel 90 degree grinders , hope the make an M12 Fuel straight grinder brother !
Wow over 90K already! Silver Play Button on the way dudes. I just got your latest comment, but it disappeared? Either way, thanks for checking out the vid! Only reason I haven't been lurking with the Very Cool Gang more lately is I'm too broke for the new tools and trying to get these cars moving fast!
Disappeared? Did you check the spam folder for comments?
@@VCGConstruction Yeah! Really strange. If I go to it from the studio app it just says "This comment is no longer available." Must be the DeWalt execs paying off TH-cam. ;)
I put another comment on the video, let’s see if the “DeWalt Execs” delete that comment!
@@VCGConstruction Nope, got it! Thanks again. Can't wait to see you at 100K!
@@VCGConstruction Also *sigh* I'm so broke. I'mma need me one of those angle grinders though.
I can't wait to get my hands on that right angle dye grinder. I see alot of applications for that puppy! Nice vid fam! #VCG4LIFE!!
You da man Amos thanks!!
Awesome new auto motor vehicle tools
I have that full set of Milwaukee 1/4 sockets, and they are holding up great.
Thanks for the feedback!!
They need comfort grip on ratchets and breaker bars, locking flexhead ratchets! 1/2 tq wrench isn't enough at 150ftlbs max. Should be 250ftlbs. U can get a gearwrench digital tq wrench for 150$ Precision Instruments split beam with thumb dial 165$ They missed the mark at 150ftlbs for 599$
@darkjedi351 well they aren't at 150ftlbs on a 1/2in snap on tq wrenchs split beam are Precision Instruments
The price is high and even though they say it obviously can be used for automotive work, like Vince said in the video, it was designed for other fields. Not really for automotive work.
Their new digital torque wrench isn't even for Auto Mechanic's from what I've heard it's for solar panels and something else , I Guess ...IDK ...
@@fattygamer94 stop it! I dont see the flat rate master and all the other auto guys that were invited torq solar panels. Dont try to answer something u dont know
@darkjedi351 snap on is over priced on tq wrenchs. The gearwrench digital does Tech angle also. For half the price as a standard tq wrench Milwaukee made
Wow.... did you all see that damn torque wrench!!!!???? Freaking amazing! Team red boyyyyyy
And I was wondering where to spend my bonus check thanks Vince great idea✌️👍👍
Amazing I am very glad you guys have moved to Automotive tools keep up the great work on the best tools in the world...
Hey man, thanks for all the vids!! It really has helped me make an educated decision on buying Milwaukee tools. I’m sold!!
if they have these tools about 2 years ago, then I won't be paying high price for snap-on, I got my M12 3/8 Impact driver, love it, way better than any other brands out there.
Torque wrench is sweet but theres a couple things i would want it to have before i buy it. First would be to have a range of up to 250 or more ft. Lbs. No way im spending 100s on a wrench that cant be used for every job. Second would be a flex head, personal thing i really like flex head torque wrenches, they make a huge difference in accessability
I have been begging for the 90 degree die grinder. Now I need a air hammer in m12 or m18
Jeff Genchi I was just looking for a cordless air hammer from Milwaukee! I’m glad I’m not the only one!
@@StefanThePro I want one for sure
I don't know how they would make an electric air hammer as it's a piston reciprocating. I would like a cordless cutoff wheel
@@juliogonzo2718 good question, the just need to build a smaller electric jack hammer. An air hammer is just an air operated version. We would like one that is smaller and accepts our automotive air bits. Milwaukee already built the cut off tool in the M12 line
@@jeffgenchi5863 I watched a video on a Bosch electric jackhammer after, it had a piston on a crankshaft driving another piston that was the hammer. I wonder if it could be made as small as an air hammer and have as much force? I might look at the cutoff wheel it would be handy if it's a 4" one. One of those and some cordless hydraulic rebar shears would be a burglars dream lol. I'm not a burglar by the way
That note about the torque wrench not being developed for automotive use is important. Obviously you can if you want but they may design the next gen one to be more automotive friendly with high torque settings and angles.
Very true Jose!!
They need to make an electric air hammer without the air. Lol
Iv been hoping someone figures out how to make one for a couple years now!!!!
Some things just work better with air. Enter the air hammer.
Question about the Milwaukee torque wrench. Does it have an angle mode on it like my matco torque wrench? I deal with head bolts that require being torqued to spec (say 55 ft/lbs) then go back and add 90° to each bolt. My matco has this function built in so i dont have to get out an angle finder or mark the bolt and check it. Just set it to angle mode, set my spec, and start turning and it beeps when i hit the spec. Not trying to flex matco, but would be nice if the milwaukee has this as well.
I think Milwaukee tools should get a tool truck that like snap on
BROOO, thanks for this video!!!!!!!!!!! I love Milwaukee
Have you reviewed the Milwaukee m18 jobsite radio? The rectangular one with out blue tooth?
Only Wish I could Like it More than Once and Share it more than Twice!! You Da Man Vince!!
Just bought the stubby impact 3/8. They better not come out with a smaller more powerful model, wait a least a year please.
I did too! lol Its always my luck something new is just around the corner and I don't know about it!
Another great video Vince thank you
Awesome 👍👍👍👍
Interesting line up of tools , but my question is when will Milwaukee come up with a needle gun ?
Anything like the ryobi garage door opener coming soon?
I'm pretty sure I'm gonna order like 15 of those die grinders just because.
I'll be returning my 18v brushless back into the shop to get fixed tomorrow
Thanks brother I’ve been waiting for this!! Love yinz guys keep up the awesome videos!!!
Alright I'll take a tool box.
is anyone else nerdy enough to notice most of the lighting in that place is done with their own lighting devices?
Ok I'm glad I wasn't the only one noticing that
Can you make the m12 grinder with the quick chuck like the impack driver, with the hex bit shaft,, so i don't have to have a tool to change the wire brushes or sanding pads and do the moto tool with the 1/8 and 3/32 in hex shafts please, and you can make the circular saw and cutoff tool with cam lock blades so you can make them tooless tool changes and you guys will finally be getting out of the dark age tools and a pencil grinder that is m12 battery that has wired cord to the grinder and make a belt clip holder for the battery and make it tooless tool change, please thank you and keep up the good work !!!!
I like to see new and improved brakes bars
Awsome video
Thanks Grimaldi we appreciate it!!
Maaaan that 1" high torque wrench is siiiiick "cough cough"
VCGGGG THE ONE INCH IS HEREEEEEEEEE..VINCE Y'ALL GOTTA DO A VID ON THAT MONSTERRRRRRRR JUST FOR US YA VCG COMMUNITY..
That torque wrench is legit! I like the coverage of automotive tools VCG
A quarter inch torque wrench like that would be great for a few aviation applications
OMG! I need that Torque Wrench!! Like Now!!
The Torque Wrench is pretty awesome!
I got the m12 3/8 ratchet and its wicked then i bought the 3/8 stubby m12 and its perfect for my needs i switched over to pack out and im going to retire my mastercrap ratchet and socket set for the milwaukee full set thats packout ready.
Super excited for all of the new tools coming out. I have only one gripe though. I really wish they’d develop an m12 ratchet with the pass through style sockets. The gearwrench pass through sockets are the same as the craftsman ones, and like others as well. So pass through sockets have become a standard in their own right. As of now, craftsman has made the c3 max axess cordless pass through ratchet, but this was years ago. One of the main tool companies are going to eventually bring this idea back from the dead and reintroduce it to the market with updated brushless and battery technology, and I’d really be bummed if dewalt or makita did it. Someone who knows anyone at Milwaukee, please pass this up the chain?!
I really hope Milwaukee will come out with the electric torque wrench that does angle torque. I'm pretty sure every BMW tech would want to have one. Pretty much all bolts are torque to yield
I would like to see the m18 wire stripper kit if you’re taking suggestions
That torque wrench do torque angles??
Where can I find out about these kind of hands on events?
I'm going to try that 1in impact.
If it stands up to the punishment it will get in an oilfield repair environment, it will take whatever else you can throw at it.
I will let you know.
P.S. I'm real hard to impress, if it won't work and hold up, it can't stay!
Let us know Kelly!!
Is the sockets and ratchets made in USA?
Vince you a badass dude 👊
Great tools, but the guy in the beginning needs more than a simple dust mask when grinding on aluminum. You definitely need a ventilation system and a respirator.
Id love to know what the warranty is on there hand tools. Are they marketing to compete with matco and snapon or is this more for the home diy guys. Also if they wanna sell that torque wrench to mechanics 250ftlbs would be my minimum and I would also like to know if they do angle torque as well as if it does newton meters.
So are the mechanics tool life time warranty like snapon?
The torque wrench is sweet I could use that
It doesn't do torque to yield bolts. Pointless in the automotive world
@@williammilbert7142 that's good to know very useless then
That's the power of RED FUEL
I definitely want to get the m12 right angle grinder!
Me too I also like the 3/8 extension ratchet as well I was hoping they make one cause snap on have one last year
Same here! And the torque wrench for my ATV motor rebuilds. Yeah its overkill but soooo damn cool! Lol I have soooo many m12 tools but not all and I cant keep up! They keep popping out with something new!
I think they are shooting themselves in the foot on the 1/2 in torque wrench. I get it it's only a 12v ratchet but just about every other 1/2 in torque wrench goes to 250-300 ftlbs
How long should the die grinder run before over heating?
Milwaukee has continued innovating. I've been in the electrical trade for 20 years. I've watch as contractors move from dewalt, to Bosch, and now Milwaukee. They dont even bother with dewalt any more. Bosch still has great tools that fill in the gaps Milwaukee hasnt covered or they just still have the tool that wont die. I'm currently getting away from dewalt in my personal tools, and moving to Milwaukee.
i have been so waiting for a cordless die grinder. im almost 100 percent away from air!!! i know theres times i have to use it but i hate it! idk about the sockets id prefer a super shallow set for these fwd cars. been doing this 39 years and its getting harder on me so any thing that makes it easier and faster im all for!!!! i see the die grinder and 1 inch in my future!!!! i love the fuel line!!!!
Do your wrenches fit snugly on the head of a bolt, or sloppy like Gearwrench. I'm not HAPPY with my Gearwrench wrenches.
Nice
Awesome Video Vince!!
Did you see that tool box with the soft close
Man i wish they would think about beefin up their bigger impacts with some kind of ip rating. I work in the oilfield and constantly have to worry with water, dirt, or mud with my gun and thats really the only thing that kills em out there. Maybe this might be doable in the future
New ratchets are nice
Really cool torque wrench!
FFS! I just dropped $700 on my SnapOn Torque Wrench! I'm still needing an M18 fuel Monobolt Gun though. The M12 rivet gun is awesome. I use that thing almost everyday. All I do is work on 53' trailers. Please, please, PLEASE Milwaukee I really need an Monobolt gun!
They had me at torque wrench with motor in it and OneKey
When is the safety glasses coming out?
When is it available ? I was looking for on Home Depot and Milwaukee .com and never found it. Can you help me ?
Looking Agriculture usage with these power tools maybe service toolbox that I can carry from truck to farm equipment that weather proof.