2013-2015 Nissan Altima iJDMJOY Switchback LED Complete Install - LED Headlight Conversion
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Todays video is 2013-2015 Nissan Altima iJDMJOY Switchback LED Complete Install - LED Headlight Conversion.
Don’t forget to subscribe to support the channel!
Follow me on Instagram for content for the videos are released!!
Instagram - / customdiyguy
Email - CustomDIYGuy@gmail.com
Address
CustomDiY
4120 Douglas Blvd STE 306-507
Granite Bay, CA 95746
Can you explain what you did to the resistors? What’s the black tape set up? Could you also explain the fuse box a bit more too? Thank you for the video it was still helpful
The resistors just plug into the old turn signal socket, then I used electrical tape to secure the connectors together. Then I used a couple zip ties to secure the wiring and resistor up to the factory harness, making sure that the resistor had nothing touching it.
In the fuse box, the top left connector, purple or brown wire top right will be your 12v switch power, then 3 wires below that one should be your dimmer wire (you don’t have to use that one. The far right connector tap the black ground wire or bolt directly to frame or negative battery terminal.
The white lights work but not the orange ones❓
Orange is just blinkers. But they work when the blinkers are on.
That looks awesome on that 2015 altima...man I really need some advice on my 2015 altima.. my low beams are very dim can't hardly see anything at night
Check out my Amazon store. I have the leds on there that we use. Amazon.com/shop/chrisbuildsit
Beautiful home man
Hello! Are you willing to do it, in other Altima’s?
If your in my area I would do it for you. Send me an email, link is on my TH-cam page.
Thank you 🙏🏾
Hey, are your DRLs still functioning as new? I remember installing a set of these a few years ago but then after a few months they started to flicker and some of the leds went dead. Also, after about 10 car washes over the course of the 3-4 months, I noticed that water was getting inside them. I was so disappointed because these lights make the car look 1,000 times better and they are really bright. Would love to give these another shot, but I just wanted to get some feedback from someone else's experience.
Thanks! Yours look great btw.
My daughter drives the car back in the Midwest, I won’t see it again till this summer. Haven’t heard of any issues but not sure she would notice if there was. Lol.
@CustomDIY Lol got it, thanks for the reply!
Leds go bad when the resistors in the circuit go bad. Maybe try another brand, a little better quality. It makes a difference
I do the same step by step but when my headlight are off and put my blinker, stars blinker both side yellow en white.
19:21 the orange light on the side of the headlight of the 2015 altima mines doesn’t come on yk why ? i have a 3.5 sl btw
My guess would be parking light fuse or bad bulb. Does it come on with remote start?
@@chrisbuildsitall no
So I used your video to guide me installing everything. I followed everything pretty much step for step. May have some wiring a little less pretty but besides that I have all my wires tapped in to the same place. But I get no lights at all. Any idea or suggestions to the problem? Thank you
I remember that I had an issue with mine also, just double check your ground and 12v switched source. Also may just hook them straight to the battery to confirm they work. Shoot me an email if you have more issues and I’ll help you out. chrisbuildsitall@gmail.com
Wait so what are these headlights called because I need to replace mine
The headlights are stock, just used some high quality LED bulbs.
I tapped into the purple 12v but when I plug back the negative battery terminal, the voltage drops to zero . It has me questioning if I am using the correct slot from the fuse box.
Basically I have two wires 12v and ground leaving the fuse box but I cannot get 12v.
I have a 2013 3.5 S altima
Wiring could be different. Know that I had to do some searching to find the correct wire. Use your volt meter and find a 12v that turn on and off with the key. I grounded mine in the fuse box also.
Love my Altima
Great cars!
Great job they look good
I can’t seem to locate those socket resistors anywhere.. I never ask for links but what did you look up?
I have them on my Amazon store.
Amazon.com/shop/chrisbuildsit
Donde puedo conseguir los cuartos para mi altima
www.amazon.com/iJDMTOY-Daytime-Assembly-2013-2015-Assy/dp/B01AGRWRWU?ref_=ast_sto_dp
Where can I order these
Wanting to switch out my
Old ones for new brighter updated ones.
Amazon
Where did you get they resistor from, or did you make it yourself?
Came with the jdmjoy lights
Should put a link where you got the headlights from
Everything was from Amazon.
can 9006 headlights fit in Altima 2015?
Don’t think so. Should use an H11 and H9 I think.
I know you said you wasnt doing the highbeam, but i want to put led highbeams in mine also, but i cant get to it under the finder. Any suggestions? If i gotta take the front bumper off forget it
I honestly am not sure. My daughter drives the car so I only see it a couple times a year. I would guess the bumper cover has to come off though.
@@chrisbuildsitall ok thanks, i thought so, but not doing that
@@chrisbuildsitall⁰o0⁰pp0⁰pp⁰⁰p⁰0⁰p⁰p⁰