How are you liking your Lomax cover on your Tacoma in 2020? Still thinking it is the best one? Also, have you removed the cover to make full use of the bed occasionally? Is that easy?
I actually sold my truck so don’t have it anymore but I did use the cover until the end. I still like it. I don’t remove it a lot but when I do, it’s pretty straight forward.
I just got my Lomax for my Toyota Tundra (without deck rails). In my box is a weather strip, but the instructions have no mention of the weather strip, and every other Lomax install video I have seen does not use a weather strip. Is the weather strip only needed because of the deck rails you have?
My truck bed does not need to be waterproof, I just want a cover to keep things out of sight. I also don't want to drill into the metal frame or bed. Can this be installed without the gasket, or will it then shake around too much?
That’s a question to double check with the manufacturer. I’m sure you CAN install it without the gasket but I’m not sure why anyone would without it considering the benefits and ease of install.
No cover is secure if someone really wants to get in. It's a deterrence and makes it more inconvenient for most would be thief. With that in mind, it does fine.
Nice video, just installed mine. One thing threw me off. When you first installed the weather strip, you ran it all the way from the rear. I did the same and when I closed the tailgate it got all jammed up. Ended up trimming that off.
Hi you cleared a few things up for me how is this cover as far as security? I know if they want in they will get in just wondering what your thoughts are.
I watched another install video and they guy said he slanted the weather stripping down at the rear of the truck bed to facilitate closing of the bed. Is this recommended?
Well, if the manufacturer themselves don’t have the parts then it’s probably going to be an uphill battle. I hope whoever you bought it from has a good return/exchange policy.
Wow! Really low profile nice!... How about a 1 year review please 🙏.... Any pros/cons, how it holds up to Off-Roading, any fading of the material, etc?
I thought about the Diamondback but it just doesn't fit the way that I use a truck bed. I bought this from AutoAnything but buy it wherever you can find it for the cheapest. Not sure what you mean by black urethane.
Yeah, and the Diamondback has more height than I wanted, and I have been trying to find exactly what you installed. This seller lists three color options. shop.agricover.com/product/lomax?_ga=2.266200847.1666020019.1575722344-1550935632.1575722344&_gac=1.54299098.1575766038.CjwKCAiAuK3vBRBOEiwA1IMhukppJrRK5DwaKnaoEQG3-Ek7nFLGim_2MnJuqaMOILOeXwwNwIzMCBoC-AEQAvD_BwE
Hai Tran Okay, thanks! I will have to do some research as to which makes more sense for me. A matte finish would look better if the other one is glossy, in my opinion.
Hey great video very detailed and great explanation on everything. Quick question, is the 3rd gen Tacoma and 2nd gen Tacoma short bed length exactly the same? I went on their website and there is no option for any years of gen 2 Tacoma’s. Im pretty sure its the same but I just wanna double check before I spend $1000 on something that doesn’t fit my truck. Any help is appreciated thanks!
Believe me, if I had the money, I would've kept both. I'm hoping that in a few years when we get a fourth generation Tacoma, I'll have the money to pick that up! Also, good luck with the Lomax. I hope it serves you well 👍🏽
It's technically an optional add-on but it's been preinstalled on every Pro that I've seen come to the dealerships around here. Knowing this, it can be negotiated for free.
How are you liking your Lomax cover on your Tacoma in 2020? Still thinking it is the best one? Also, have you removed the cover to make full use of the bed occasionally? Is that easy?
I actually sold my truck so don’t have it anymore but I did use the cover until the end. I still like it. I don’t remove it a lot but when I do, it’s pretty straight forward.
Did you have to buy new side rail covers for truck bed? My tacoma side rail covers have cut out sections from the previous bed cover.
No, my truck was new so nothing was cutout from it.
I just got my Lomax for my Toyota Tundra (without deck rails). In my box is a weather strip, but the instructions have no mention of the weather strip, and every other Lomax install video I have seen does not use a weather strip. Is the weather strip only needed because of the deck rails you have?
I won't be able to tell you, I don't have a Tundra. You may want to contact the manufacturer for a clear answer.
@Blake Jones Did you ever find an answer to this? I have a Tundra and will not get rid of the rails so I'd like to know.
My truck bed does not need to be waterproof, I just want a cover to keep things out of sight. I also don't want to drill into the metal frame or bed. Can this be installed without the gasket, or will it then shake around too much?
That’s a question to double check with the manufacturer. I’m sure you CAN install it without the gasket but I’m not sure why anyone would without it considering the benefits and ease of install.
How secure would you consider the cover? Love the look but my biggest worry is someone breaking in.
No cover is secure if someone really wants to get in. It's a deterrence and makes it more inconvenient for most would be thief. With that in mind, it does fine.
Does the metal top have bare aluminum on the sides? Looking at weathertech and it's bare metal. They look very similar. Tia
I've sold the cover so don't have an answer for this.
Nice video, just installed mine. One thing threw me off. When you first installed the weather strip, you ran it all the way from the rear. I did the same and when I closed the tailgate it got all jammed up. Ended up trimming that off.
That’ll happen. I just trimmed off a little at a time so I got it as close to the tailgate as possible.
Hi you cleared a few things up for me how is this cover as far as security? I know if they want in they will get in just wondering what your thoughts are.
Like you said, if they someone really wanted to, they’d get around any cover. This one is no exception. But I assume it’s about the same as others.
Did you put the weather strip along the bed of the truck uo against the cab as well?
I did not.
why did you decide to go with lomax instead of buying another fold-a-cover G4 like on your previous truck?
I’m just too short for the ability to lift the cover panels at either ends to be useful. Might as well save some money with a cheaper design.
I watched another install video and they guy said he slanted the weather stripping down at the rear of the truck bed to facilitate closing of the bed. Is this recommended?
I just cut the excess off but I suppose if it doesn’t get in the way, the excess can just be repositioned.
Also do you still have it on your truck how’s it holding up?
I actually sold the truck and also sold the cover so I don't have any updates on it.
Is the weather tech cover just a re-branded lomax cover?
They definitely look very similar but I can’t confirm with absolute certainty.
Hey man I just got the same top and it didn’t come with the channel inserts? Know where I can get them? Thanks!
The manufacturer?
Tried. They don’t seem to have them on the website separately. I’ve already tried to call.
Well, if the manufacturer themselves don’t have the parts then it’s probably going to be an uphill battle. I hope whoever you bought it from has a good return/exchange policy.
Did the 4x4 logo on the tailgate come stock?
Yes, it did.
Hey man great video is this the matte black Color way ?
I believe it is.
OK thanks
You're welcome!
Wow! Really low profile nice!... How about a 1 year review please 🙏.... Any pros/cons, how it holds up to Off-Roading, any fading of the material, etc?
Unfortunately, there will be no updates as I’ve already sold the truck and cover.
Thanks for the video! I had planned to buy the Diamondback tonneau cover. Where did you buy it? And did you get the black urethane?
I thought about the Diamondback but it just doesn't fit the way that I use a truck bed. I bought this from AutoAnything but buy it wherever you can find it for the cheapest. Not sure what you mean by black urethane.
Yeah, and the Diamondback has more height than I wanted, and I have been trying to find exactly what you installed. This seller lists three color options. shop.agricover.com/product/lomax?_ga=2.266200847.1666020019.1575722344-1550935632.1575722344&_gac=1.54299098.1575766038.CjwKCAiAuK3vBRBOEiwA1IMhukppJrRK5DwaKnaoEQG3-Ek7nFLGim_2MnJuqaMOILOeXwwNwIzMCBoC-AEQAvD_BwE
After some research, I believe that I have the standard matte black finish. The black urethane is something that was just recently released.
Hai Tran Okay, thanks! I will have to do some research as to which makes more sense for me. A matte finish would look better if the other one is glossy, in my opinion.
Hai Tran It looks to me that WeatherTech has put their name on the Lomax cover.
Which rubber seal did you use?
This was some time ago but I’m pretty sure the one that came with the cover.
Thanks for posting!
You're welcome!
Where can i buy it?
Have you tried searching on Google?
Very nice, product and review 👍
Thanks 👍
Hey great video very detailed and great explanation on everything. Quick question, is the 3rd gen Tacoma and 2nd gen Tacoma short bed length exactly the same? I went on their website and there is no option for any years of gen 2 Tacoma’s. Im pretty sure its the same but I just wanna double check before I spend $1000 on something that doesn’t fit my truck. Any help is appreciated thanks!
I never owned a 2nd gen so can't answer your question. Google will work out a lot better for you.
Great video 👍🏼
Thanks
I miss your truck !!! It was so fly !!!!!!!
Lol so is life. Have to look forward and enjoy what we have now.
So true, need the truck and supra now that's life !!! lol.. im installing my lomax from your video. thanks !!!
Believe me, if I had the money, I would've kept both. I'm hoping that in a few years when we get a fourth generation Tacoma, I'll have the money to pick that up! Also, good luck with the Lomax. I hope it serves you well 👍🏽
the lomax came out great very nice and well fit..your video guided me didn't even use instructions , thanks !!
Glad to hear that and you're welcome!
is this on your 2020..
going to buy this was going to by the g4 but I was checking this out
I see it was anywys looks nice im going with the black urethane its new color.will go good with my midnight black trd pro. just bought truck ..
Good luck!
Yep just ordered , love the way it looks on your pro good luck also ..!!!
Yeah, it’s a very clean look.
Where did you get the bed lights ?
They were installed before I bought the truck.
Hai Tran did you pay extra or they come standard on trd pro
It's technically an optional add-on but it's been preinstalled on every Pro that I've seen come to the dealerships around here. Knowing this, it can be negotiated for free.
Seems like it would be easier without gloves on.
Whatever works for you 👍🏽
go to here
Here👇🏽? Not over there 👉🏽?
I dont even a car....
Different life priorities.