How To Water Pump Replacement & Coolant Bleed For 16-20 Lexus RX350 (SUPER detail) 2GR-FKS

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 มี.ค. 2024
  • Replacing the water pump and bleeding the cooling system in a 2016 Lexus RX350 F sport with the 2GR-FKS 3.5L V6 motor. This guide is for 2016-2020. It can be used for newer than 2020 models, but keep in mind that the water pump part numbers are different for the 2020 and newer.
    Video Guide:
    1:18 Jacking and support points
    1:51 This is where water pump was leaking
    5:27 14mm nut on the bottom of the engine mount
    7:45 Engine Mount Bracket (block side)
    9:29 Close up of engine mount bracket
    10:18 Electric thermostat removal
    10:42 Loosening water pump pulley bolts
    10:58 Belt tensioner - removing serpentine belt
    11:16 Water pump pulley removal
    11:24 idler pulley removal
    11:31 Water pump removal
    12:25 water pump surface cleaning
    14:20 Water pump bolts and torque specs in detail (important)
    18:42 Bleeding cooling system
    www.araparts.com
  • ยานยนต์และพาหนะ

ความคิดเห็น • 11

  • @darrinhull2763
    @darrinhull2763 2 หลายเดือนก่อน

    Seeing your video saved so much money from the stealership, and I used same parts they would have over charged me for as well. Thank you.

    • @araparts
      @araparts  2 หลายเดือนก่อน

      This made my day. Glad to have helped! Have a great weekend!!!

  • @oceanlin2066
    @oceanlin2066 2 หลายเดือนก่อน

    Good Job👍

  • @jorgefong4217
    @jorgefong4217 4 หลายเดือนก่อน

    Saved time & $ . This is by far the most helpful video I found!

  • @Oscarutabaga
    @Oscarutabaga หลายเดือนก่อน

    do you remember what the torque specs were for the water pump pulley and tensioner pulley?

    • @araparts
      @araparts  หลายเดือนก่อน

      I never removed the tensioner, and don’t have the torque specs unfortunately. I do believe it’s reverse threaded (“lefty tighty righty loosey”).

  • @togjmesic
    @togjmesic 3 หลายเดือนก่อน

    Will the ECU be operational when plugged back in or will it need a diagnostic tool from the dealer to program it to work?

    • @araparts
      @araparts  3 หลายเดือนก่อน +1

      It'll be fine. There was no check engine light, and the modules that show any errors will eventually redo their self test and update on their own. There was no check engine light, etc. I used an Xtools D7 ODBII scanner to erase the error codes from the modules immediately.

  • @maoss40
    @maoss40 2 หลายเดือนก่อน

    Their is no need to reprogram ecu?

    • @araparts
      @araparts  2 หลายเดือนก่อน +1

      No need to.

  • @hyeeagle
    @hyeeagle 8 วันที่ผ่านมา

    That’s not easy regular water pump to replace it. You have to know what you doing. It’s hard to do in the shop. Do you imagine if you do on the floor how hard will be and how long will take?Lexus warranty is paid almost 9 hours and it takes almost a day if you do first time. So you saved $2,500 labor right there.