Cheap Windows 10/11 Office/ Steam & Gaming Keys available from affiliate links: www.premiumcdkeys.com/mikesunboxing Discount code: MIKESUNBOXING 7.5% Off
My tx3 mini is unresponsive. I've plugged in the power cable but the blue notification light on the front doesn't appear but just the red light at the back of the box
Hello I connect successfully but at 9% I get error (0x30405004)UBOOT/Partition_aml_dtb/Verify partition/Error result” while formatting. I tried older fw version, didnt help though. Any idea how to fix this?
I used usb port on my laptop (used the same usb port and the same usb cable which I used previously few times successfully for some other android boxes.
I can't login to my tx2 box after upgrading to v 7.1.2. Have tired deleting all google memories but it still does not work. Factory reset also does not work the only way I can get it to work partially is to run the upgrade again but then it goes gray in the middle of me setting up the account. So I am back to square one. Have tired to log in with youtube after updating with Aptoide and a number of the ways but always fails. Love to get some more ideas if you can think of any? Many thanks.
Hello budy, how are you? could you help me in my tx3mini box is appearing on the boot display how do I fix this deito with your explanation of the error at 7%, have other software to restore bootoriginal?
@@vitorgustavo6922 a versão do software estava errada com o aparelho ,estava tentando usar a tx3 em vez da tx2 que seria a correta,depois disso foi bem
Hello Mike, what could cause device to be not recognized by TV now and then, ie. when turning TV on it says like No HDMI input. Tried on two TVs same behavior. Original firmware, original OS, android 7.1. Thank you in advance.
With this method does erase user data? I have damage my Android recovery mode and I want repair/fix recovery mode without data loss.I don't have exactly this device but I believe that are similar,I have x96 max+.I haven't adb/oem/usb debug enable maybe I use nand sort method.Thank you.
Mike, appreciate your video, however the links to the firmware doesnt work, can you provide alternative please. Mine is the 1GB/8GB version. Thank you.
Ola tenho uma tx3 mini 4/32 ela da erro não ralação será por qual motivo tentei pelo update do aparelho com o arquivo zip será q pelo cabo USB daria certo ? Tenho medo de que a tom esteja errado.
my tanix bricked, i was uptading it and had a error on screen, than I pull the power supply and tried again, but after that, it doesnt make any signal of life :( When I put the USB cable, show "boot" on screen, but nothing happens at my PC, i'm waste :((
@@mikesunboxing i tried to change firmware to my android box but after installing it from pc, when i plug into my tv i only see green light, it wont turn on..
0x10103005 .. every time i try to flash my TX3 Mini this error comes up. I have tried with three different computers but no result this error is irritating me. I have tried two different cable. Can anybody tell me what's wrong?
i have a problem i want to do the firmware tx 3 mini but the process is terminated after 9 percent writes error how can i do my friend. can you give me a link tx3 mini firmware
After making reset and image successfully I face main problem with WiFi on my android box it shows (Turning wi-fi on .... )without showing any network ???
Hello, My Box stuck as "Boot" after using the Upgrade via USB Drive "ext" So i'm trying using Your Method but he didn't Work. how can you Help Me please
@@mikesunboxing I have The Tx3 mini, i'm a QA Tester for i had to use it for Testing a streaming app like the HBO , I install the app it say that Device is rooted, even if off this option from the settings. now i'm try to erase this root: the box stuck from Android logo, now I try to erase the firmware via TF Usb ext" as mentioned in the user Manual but now it's stock in the "b o o t" little screen.. It's seems the NAND is Down! I'm from Haiti, can you contact me, I want to buy another , via DHL shipment
Hello mate, I bought the tx3 mini a few weeks before and at the beginning working properly. The last days seems to slow down. I reset it and for a few hours was working fine again. Now it seems to appear the same problem... Do you know what is the reason - solution for that? Thanks in advance!! Keep up the good work
@@mikesunboxing Just flashed confirmed 7.1 OS. Is there any chance I can get a copy of your platform.xml from system >etc>permissions mine I can't write to my SD card hence why I tried to flash to solve.
@@mikesunboxing Yeah, that's right I was using USB on the back of the pc, but I think it's my cable. Because I hear the sound of a connected USB device, but when I start the burning tool, it reaches 4 percent and it sounds like it was disconnected, and when it reaches 7 percent throw [0x32030201]Uboot/Get result/DiskInitial error. Do you think is the cable?
Are you using a USB on the back of the computer? That error is common when using pass through or extensions you should really try and use a motherboard port from the rear of the IO if possible
Love your content I frequently use your videos as a guide to either buying or "fixing" android tv boxes Hope you can help me I have the Tanix TX3 Max It works fine but suddenly it says my external hard drive (Seagate 2TB) is corrupted and needs formatting I connected it to my PC I did a Checkdisk (Windows 10) for errors I even defragmented it just in case Nothing helps I must admit I just transferred a lot of movie files But I also did that previously without any problem Just to be clear The Tanix recognized the external hard drive before, but suddenly it gives me this message Can you help me?
@@mikesunboxing Update I checked another external hard drive NTFS And it's ok So it seems it's the Seagate specifically I know what happened I deleted the "android folder" and I think als the "Lost.Dir" on the external hard drive I think that's it because I connected the drive with another android box and it didn't see the drive Please need help I know Stupid of me to delete those specific folders
Fabio padilha Thanks for the feedback! Please consider sharing the video and information on your social media, it really helps to get the message out there.
Hi Galata, Thanks for reminding me, I totally forgot to make a follow up video with the different ROMS that are available to Tanix box users. Is Mini Librelec your favourite? Or any other recommendations?
Hello friend, I want to ask you something. My box is different from the TV box TX9 and I flashed it firmware with that of the TX3 mini and after flashing the TX9 firmware it turned off the clock on the display. Can you tell me what to do to get his display clock back on??
Cheap Windows 10/11 Office/ Steam & Gaming Keys available from affiliate links:
www.premiumcdkeys.com/mikesunboxing
Discount code: MIKESUNBOXING 7.5% Off
My tx3 mini is unresponsive. I've plugged in the power cable but the blue notification light on the front doesn't appear but just the red light at the back of the box
does it appear in the software when trying to flash it?
thanks, it really works for my tx3
Glad I could help
Thnx for your good explain . i've a question about bleutooth not exist in this tv box can i add it . thnx again
Hello
I connect successfully but at 9% I get error (0x30405004)UBOOT/Partition_aml_dtb/Verify partition/Error result” while formatting. I tried older fw version, didnt help though.
Any idea how to fix this?
did you use the rear motherboard usb ports and a good quality usb cable?
I used usb port on my laptop (used the same usb port and the same usb cable which I used previously few times successfully for some other android boxes.
@@fanaticoss12345 HEY I HAVE THE SAME PROBLEM :(
HI dear, can you tell me if is possigle soldering a battery on PCB to hold the clock working out RTC from internet?
I don’t know sorry but sounds a bit sketchy
I can't login to my tx2 box after upgrading to v 7.1.2. Have tired
deleting all google memories but it still does not work. Factory reset
also does not work the only way I can get it to work partially is to run
the upgrade again but then it goes gray in the middle of me setting up
the account. So I am back to square one. Have tired to log in with
youtube after updating with Aptoide and a number of the ways but always
fails. Love to get some more ideas if you can think of any? Many thanks.
Mine got the same problem too..still got no solution till now
you can't log in to youtube or google services?
Hello budy, how are you?
could you help me in my tx3mini box is appearing on the boot display how do I fix this deito
with your explanation of the error at 7%, have other software to restore bootoriginal?
@Leonardo Cavalcante sim, obrigado!!!
@@Manoelsst como resolveu seu problema?
@@vitorgustavo6922 a versão do software estava errada com o aparelho ,estava tentando usar a tx3 em vez da tx2 que seria a correta,depois disso foi bem
Hello Mike, what could cause device to be not recognized by TV now and then, ie. when turning TV on it says like No HDMI input. Tried on two TVs same behavior. Original firmware, original OS, android 7.1. Thank you in advance.
Hi i upgrade the version of tx3 by online but not good i want to downgrade to original , which version is in the video and how can I find old one
the version in the video is at least 5 years old now, and hard to find online
Hi, where do i find where my usb is allocated on the box home screen
Sorry I don’t quite understand your question
@mikesunboxing when you put a usb stick into the usb port, where will I find my files on it
Where to find your flash drive was good media player to play things off
Hi my computer wont recognize my Tanix box. How do i do about that? my computer not detecting the USB.
try another cable or USB port
hi mate ive been on all afternoon trying to add the irmware to the usb burning software and evertime it says parse burning image failed help
Not sure what is happening with that ?
i cant find firmware i go to threr site and had email sent and i click on the link and page not avaliable
yeah i think this device is no longer supported as it is an older device now
@@mikesunboxing ok so I have one that is working is there a way I can clone it
I got the same issue as you. Anyone can help?
Hi. Thanks for this. Hugely helpful even now :) Cheers!
Glad it was helpful!
Hey the button not working can you tell me another way to go to recovery mode
not that i know of sorry
With this method does erase user data? I have damage my Android recovery mode and I want repair/fix recovery mode without data loss.I don't have exactly this device but I believe that are similar,I have x96 max+.I haven't adb/oem/usb debug enable maybe I use nand sort method.Thank you.
the USB method wipes the drive and replaces in with a new image
@@mikesunboxing Thanks from Greece for your answer.
Hello
mine lights up but does not display anything on the tv overnight tomorrow has come
how to do please
did you try the method in the video?
@@mikesunboxing not yet
Bro, my tx3 mini reset button dose not work. And my box is now hang. What can i do? Please get me any solution.
it the reset button is broken it will need replacing most likely
Bro my TV box reset button is given in av cable
yes that is right
Mike, appreciate your video, however the links to the firmware doesnt work, can you provide alternative please. Mine is the 1GB/8GB version. Thank you.
sorry i think they have been moved or taken down, i am in the process of finding new sources. My apologys
Same issue
Mike do you have any firmware?
Maybe try to upload it on mega... I've been trying to get the firmware
Mike do you happen to have a backup
i'll have a look. I did keep one somewhere but it might have been on a drive i used in a NAS
@@mikesunboxing please and thank you..otherwise this thing is a paperweight
any luck on a back up?
Ola tenho uma tx3 mini 4/32 ela da erro não ralação será por qual motivo tentei pelo update do aparelho com o arquivo zip será q pelo cabo USB daria certo ? Tenho medo de que a tom esteja errado.
sorry i don't understand this
Will this fix my already corrupted firmware(I have uninstalled a key module by accident)
my tanix bricked, i was uptading it and had a error on screen, than I pull the power supply and tried again, but after that, it doesnt make any signal of life :( When I put the USB cable, show "boot" on screen, but nothing happens at my PC, i'm waste :((
oh dear
can you do this same process using a mac and not a normal pc or windows laptop?
I'm trying to get that video made. Need to fire up a hackintosh 😃
Could a hdmi cable work instead of the usb cable
no it needs to be a type a to type a USB cable
Hi mike. Would you upload the img file for us? That would be great. Please sir
I’ll host it on the discord in the technical questions and answers. Edit the file is too big for the server I’ll have to rethink that
I Have an issued stuck on 1% [0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed, do you know how to fixed it ?
use the rear USB on the PC or a different port and run as admin
@@mikesunboxing I already try all but, after I search my ROM is not S905W but S905W2
Hey there, can i use usb c on laptop and regular usb in tx3 mini to connect ?
no sorry the cable must be type a to type a
@@mikesunboxing i tried to change firmware to my android box but after installing it from pc, when i plug into my tv i only see green light, it wont turn on..
My tanix6 disply not opened....box not work...but get power..
What can i do?
try the method in the video, but you will need to find the image yourself
I need to know this box I see a video with a android 8.1 do you have this updated 🤔
i dont understand your question
@@mikesunboxing he saw this box updated to Android 8.1, he is asking if you have the update
I don’t have the update as a file and I think my box is on 7.1 still
hi thanks but not can download the firmware if u have new firmware or update tx3mini
i have a firmware here saved but it is well over a gig in size so not easy to share
0x10103005 .. every time i try to flash my TX3 Mini this error comes up. I have tried with three different computers but no result this error is irritating me. I have tried two different cable. Can anybody tell me what's wrong?
Sounds like that is a faulty ROM or storage device.
Hello My Tanix tx5 max does not display on the TV screen. What should I do?
same problem my Box what to do ?
did you try the things mentioned in the video?
Hi mike, where i get firmware for tx3pro? I've seen the web but nothing there.
Thanks before
i'll see what i can find
@@mikesunboxing can't wait
i have a problem i want to do the firmware tx 3 mini but the process is terminated after 9 percent writes error how can i do my friend. can you give me a link tx3 mini firmware
Here try this www.tanix-box.com/downloads/
@@mikesunboxing e kam shkarkuar kete firmuer dhe nuk e perfundon procesin cfare duhet te bej
After making reset and image successfully I face main problem with WiFi on my android box it shows (Turning wi-fi on .... )without showing any network ???
not sure what to suggest sorry
Same here. From malaysia
does this work on TX3 Mini with Red PCB CS_905W_TX_V1.2? w/ wifi antenna??
it should do, the firmware would likely be different but a similar process to recover it
hello, I follow your instructions step by step but my tx3 mini is still on the boot (having this colourful logo for while then back to tx3 logo)
Sorry i don't have any other advice right now
Which version sir? L or Max for TX3 Mini?
probably the L the max is the version with more RAM i think
@@mikesunboxing your device seems like same with me.
Hello, My Box stuck as "Boot" after using the Upgrade via USB Drive "ext" So i'm trying using Your Method but he didn't Work. how can you Help Me please
what box have you got and rom did you try flashing?
@@mikesunboxing I have The Tx3 mini, i'm a QA Tester for i had to use it for Testing a streaming app like the HBO , I install the app it say that Device is rooted, even if off this option from the settings. now i'm try to erase this root: the box stuck from Android logo, now I try to erase the firmware via TF Usb ext" as mentioned in the user Manual but now it's stock in the "b o o t" little screen..
It's seems the NAND is Down! I'm from Haiti, can you contact me, I want to buy another , via DHL shipment
Hola. Estaba siguiendo los pasos y se detiene a los 7% por el error [0x0069026d] Unknown. Podrías ayudarme con esto?
try using another USB port or maybe the cable is not a good quailty?
@@mikesunboxing yes, I tried changing the USB port and changing the cable but the error persists ...
Hello mate, I bought the tx3 mini a few weeks before and at the beginning working properly. The last days seems to slow down. I reset it and for a few hours was working fine again. Now it seems to appear the same problem... Do you know what is the reason - solution for that? Thanks in advance!! Keep up the good work
possible thermal throttling or bad micro sd card
Hello guys.. is there any know, how i can downgrade to android 6 Marshmallow ? I was searching for a day but can't find the firmware
If you find the firmware let us know okay
@@mikesunboxing hi Mike's finally i found the firmware but after flashing, my box bocome brick and no power led but flashing is 100% successfully..
Please help, Link is not working. I also tried to subscribe to their team and they provide link but its not working.
nothing i can do sorry, i don't have the files myself
please help me, error USB Burning Tool , Uboot/GetResult/Disk Initial error
bad USB cable or use a different USB port on the PC
cant download the firmware anymore, does anyone have a copy on a cloud somewhere?
i'll see if i can find anything
0x30201006 or 0x30201004 , it stop at 7% every time on formating , how can i fix that , thx
That is a usb transfer error try using a different rear usb port
My tx3 mini no os... So no now how to install firmware... Twrp is installed in my box
Same as in the description and video download the firmware and install via usb
hi Mike.. is the upgrade to android 9.0 firmware available?
i think this has been abandoned now, you might find updates for similar speced machines
@@mikesunboxing im just getting started Mate..🙏🙏 actually i got it in Atvx bootloop now, hooe the SD unbrick method will solved it...😬😬
@@azmanahmad2820 Good luck :-)
Can I use an SD card or USB flash drive?
No it has to be a usb debug cable
when i connect my pc it say( usb not regionalized)how to fix this problem...(maybe my desktop is old version?can't support?
Did you use the front mounted usb ports on your computer? Try using the ones on the io panel on the rear of the PC
hola tengo un modelo ZQ04-X3MINI-V1.3 MARCA SUONO no encuentro firmware
sorry i don't know that model, is there not a support website for the brand?
WiFi is not on in my tx3 mini box. Please help me.
sorry i don't know the answer
WAS THE INSTALLED FIRMwARE GOOGLE PLAY STORE CERTIFIED?
Yes it was
It get Unknown error at 4 percent.... and the process fails...when download UBOOT...
probably a hardware fault i think
I keep getting this error 0x30201004/disk initialise/send command/error result
sounds like the storage is damaged possibly
I'm doing the whole process but my computer does not recognize the tv box
Are you using a good quality cable? And also make sure to use the rear io usb ports to front panel ones. They always cause problems
Hi, Is the OS firmware image Android 7.1? or lower OS??
Yes the image is based on 7.1 or maybe slightly higher but not 8
@@mikesunboxing Just flashed confirmed 7.1 OS. Is there any chance I can get a copy of your platform.xml from system >etc>permissions mine I can't write to my SD card hence why I tried to flash to solve.
My Tx3 Mini stoped in 7% in this process... how can i unbrick her?
Run the process again but try a different USB port
I HAVE TRIED ALL
I followed every step..but downloading is not starting
keep trying the server might have been overloaded and put into offline mode
@@mikesunboxing i meant my laptop didn't recognize my box didn't started the process. What should i do
TQSM MIKES
thanks for watching and commenting
i got the error when i download the firmware please help me out
What is the error message and were and when do you get it?
Farmware link not working. new link please.
i'll see what i can find
firmware download with zip file .And USB_Burning_Tool not support this file ..????
not sure what is going on there
it works for me..tq tq
Thanks for watching the video and commenting. Appreciate it
i have the next error, could you help me?
[0x32030201]Uboot/Get result/DiskInitial error
in no expert but that could be a dodgy USB cable /port or the boxes internal drive is failing or dead
Could you solved?
Yes
How? I have the same problem
FIRMWARE UPDATE BUT DEVICE NOT WORKING ANY PROGRAM
bad flash??
[0x32030201]Uboot/Get result/DiskInitial error
I have this issue, nothing seems to solve.
Is there another way to fix the boot problem?
Are you using a good quality usb cable and the rear usb ports to flash?
How do I know what are the rear ports to flash?
And
Do You recommend the cables of the links in the description?
I was meaning the USB on the back of the pc you are using and not an extension or front panel usb
@@mikesunboxing Yeah, that's right I was using USB on the back of the pc, but I think it's my cable.
Because
I hear the sound of a connected USB device, but when I start the burning tool, it reaches 4 percent and it sounds like it was disconnected, and when it reaches 7 percent throw [0x32030201]Uboot/Get result/DiskInitial error.
Do you think is the cable?
Definitely worth trying a different one just in case. Also maybe worth trying a usb 2.0 or a different usb 3.0 and see if it makes any difference
What in the world!!! I should never bought this little box, now is driving me nerd! 😥
This is my exact experience, so frustrating
i need the firmware link
should be in the video description
hi the link to donwload a image .ing is'n working
i'll see if i can find out what is going on
Tx3 have android 8?
&.1 at the moment but there was an update notification the other day but i didn't read it 🙄
@@mikesunboxing can you check if Twitch app worka well ?
thank you so much....
Thanks Ali
Thank you, its goes well with my tanix tx3 mini-a.
Perfect!
how about tx3 pro?
Same hardware I think
Hey Mike, I get the error: 0x30201004/disk initialise/send command/error result. Any idea?
That is usually the USB port or cable try using a different USB port preferably one on the back of the pc or a older usb2 port
@@mikesunboxing No result. I've tried it on 3 different computers, all USB ports, Windows 10, Windows 7.....nothing. TX3 is now in the trash...
Did you try a good quality usb a to a cable?
Could you help me please? I'm doing the process in a right way, but this messages appears
u boot/partition boot/verify partition/error result
Are you using a USB on the back of the computer? That error is common when using pass through or extensions you should really try and use a motherboard port from the rear of the IO if possible
The crew so be that the firmware you've chosen is not the correct one for the device this is also known with a checksum error
@@mikesunboxing I have de tanix tx3 mini - a
@@mikesunboxing I am using a laptop
Try using a different USB port or maybe a PC if possible
Love your content
I frequently use your videos as a guide to either buying or "fixing" android tv boxes
Hope you can help me
I have the Tanix TX3 Max
It works fine but suddenly it says my external hard drive (Seagate 2TB) is corrupted and needs formatting
I connected it to my PC
I did a Checkdisk (Windows 10) for errors
I even defragmented it just in case
Nothing helps
I must admit I just transferred a lot of movie files
But I also did that previously without any problem
Just to be clear
The Tanix recognized the external hard drive before, but suddenly it gives me this message
Can you help me?
What file system are you using on the drive
@@mikesunboxing NTFS
@@mikesunboxing
Update
I checked another external hard drive NTFS
And it's ok
So it seems it's the Seagate specifically
I know what happened
I deleted the "android folder" and I think als the "Lost.Dir" on the external hard drive
I think that's it because I connected the drive with another android box and it didn't see the drive
Please need help
I know
Stupid of me to delete those specific folders
perfeito
Fabio padilha Thanks for the feedback! Please consider sharing the video and information on your social media, it really helps to get the message out there.
@@mikesunboxing : Hi the link is'n working
I’ll check it out
hi , my 98% stop
tried a new usb cable?
thanks mike!
You are welcome Your majesty :-)
Support comment 🙂
Thanks William :-)
firmare is not free, what a waste of time
is was i'll check there are a few links make sure you are using the right one
tanix mini librelec os is beter than this is older update
Hi Galata, Thanks for reminding me, I totally forgot to make a follow up video with the different ROMS that are available to Tanix box users.
Is Mini Librelec your favourite? Or any other recommendations?
Mike's unboxing, reviews and how to i did update according to video after format I got error message and now my tx3 does not start
What was the initial problem with the box? No boot / crashing / no display?
Mike's unboxing, reviews and how to no more screen will only fire the ethernet lamp
I now press resset button but he does nothing more by updating what should I do now
1st
Congratulations! You win!
Really OMG cool
What do I win
Can I get a shout-out
My Instagram is Alexsilva9566 please give me a shout-out
Hello friend, I want to ask you something. My box is different from the TV box TX9 and I flashed it
firmware with that of the TX3 mini and after flashing the TX9 firmware it turned off the clock on
the display. Can you tell me what to do to get his display clock back on??
it is probably a change in the firmware, maybe the tx3 and tx9 use a different protocol for the clock
hello sir i have installed rom but after burning successfull i plug into tv and it shows me green screen and after that my pc is not detecting usb
green screen can be a HDMI issue and if the HDMI cant configure anything it might not boot
@@mikesunboxing so what to do sir plz