I literally just got done doing the exact same thing! I used the video as a reference for the wiring and it worked perfectly, I ordered a cheap Amazon bar though for $18, pretty much identical to the moonsmc one.
@@PkwyDrive13 Did you need a wiring harness or was there enough wire on the light bar to use? I wish you would have made your own video on installing it!
@@Highzenplug I didn't use a harness.. Just tied it into the wiring for the headlight. So when the headlights on, so is the light bar, and when I turn my high beam on, the light bar goes off
what is the AMP draw on this circuit??? did you need a higher rated circuit breaker??? and those soctchlok connectors are used at trailer rentals for a fast short haul ... they will fail quickly i have replaced those from water getting in and causing rusting the wiring, just so you know...
With the way they wired it, any time the ignition is on the light bar will remain on also. The only time it will turn off is if the high beams are switched on, or if the ignition switch is set to off.
I always ride with high beam on and that’s where I have it running with H.Beam.. Or u can run a wire harness and run on and off when u like!!! I bought a wire harness and added to 4”led pods on my bike.... just buy harness on eBay $8-15.00 and install it easy.. ground,power,switch that’s it
@@thatguyjaykay shouldn't they be on when the highbeams are also on? Seems like that would make the most sense. The whole idea would be to see better and make yourself more visible.
unless your low beams stay on when your high beams are (i think typically US vehicles have this disabled) then yes, the LED bar would turn off in this configuration.
Hi, I’m trying to get all need it for my new quarter fairing, question about the length of your quarter fairing spacer? Is it of 1in? And your screw is it of 3in? Thanks
What would look really good as well is led indicator inserts showing as white driving lights and flashing yellow when indicating using clear or smoked lenses
@@wolfhausco.3250 Just an observation if you fed the wires through the headlight rubber grommet you could do your joining inside the headlight much tidier i think hope you dont mind me saying,i do want one but the postage is nearly as much as the light which is a stumbling block for me,all the best Hirsch.
Aces High There is a disclaimer in the product description on our website regarding the way the LED Bar. Thanks for your opinion on the music selection! Hope you have a great day.
Why not splice the wires inside the headlight bucket? thanks!
So when you turn on the high beams the light bar will turn off?
I literally just got done doing the exact same thing! I used the video as a reference for the wiring and it worked perfectly, I ordered a cheap Amazon bar though for $18, pretty much identical to the moonsmc one.
TylerDD would you be able to forward the link from Amazon? Thanks
@@_MHICKO_ www.amazon.com/dp/B07DQL6M6T/ref=cm_sw_r_cp_apa_i_p2crFbEBV0ACW
@@_MHICKO_ comes with 2..had mine installed for 2 months now on my 2016 FXDLS and it's been perfect
@@PkwyDrive13 Did you need a wiring harness or was there enough wire on the light bar to use? I wish you would have made your own video on installing it!
@@Highzenplug I didn't use a harness.. Just tied it into the wiring for the headlight. So when the headlights on, so is the light bar, and when I turn my high beam on, the light bar goes off
what is the AMP draw on this circuit??? did you need a higher rated circuit breaker??? and those soctchlok connectors are used at trailer rentals for a fast short haul ... they will fail quickly i have replaced those from water getting in and causing rusting the wiring, just so you know...
Nice walk through. But come one dude, Nuts and Bolts are two different things.
Lol
Anyone know if it causes any load issues to splice the red wire from LED bar to both the running lights and hi beams?
is there a way to wire it in where the bar stays on the whole time the bike is on?
With the way they wired it, any time the ignition is on the light bar will remain on also. The only time it will turn off is if the high beams are switched on, or if the ignition switch is set to off.
I always ride with high beam on and that’s where I have it running with H.Beam..
Or u can run a wire harness and run on and off when u like!!! I bought a wire harness and added to 4”led pods on my bike.... just buy harness on eBay $8-15.00 and install it easy.. ground,power,switch that’s it
@@thatguyjaykay shouldn't they be on when the highbeams are also on? Seems like that would make the most sense. The whole idea would be to see better and make yourself more visible.
Thank you guys so much! I couldn’t have done it without this video!! Million thanks
When you turn on the high beam does it turn off?
unless your low beams stay on when your high beams are (i think typically US vehicles have this disabled) then yes, the LED bar would turn off in this configuration.
Simple and looks awesome. Well done.
Hi, I’m trying to get all need it for my new quarter fairing, question about the length of your quarter fairing spacer? Is it of 1in? And your screw is it of 3in?
Thanks
As a TH-cam mechanic I needed this
Where can I buy this (with the bracket) in Europe ? Or any USA website willing to ship it to France ?
My LED is on its way !!! Real confident after this video!! 💪 RideBright💡
Size t bars?
Is the link below a click bait?!? Trying to order but it takes me to shop now or something like that...
There out of business
Good shit bro thanks 🤙🏽
Are u guys based in Canada ?
BC van ? Let’s ride gye !
What would look really good as well is led indicator inserts showing as white driving lights and flashing yellow when indicating using clear or smoked lenses
Hirsch Moss You're absolutely right! That's why we're selling a LED turn signals + smoked lens package on our website 😎 Go check it out 🙌🏽
@@wolfhausco.3250 Just an observation if you fed the wires through the headlight rubber grommet you could do your joining inside the headlight much tidier i think hope you dont mind me saying,i do want one but the postage is nearly as much as the light which is a stumbling block for me,all the best Hirsch.
Should’ve staggered the piggy back connectors so that the tape job didn’t look as bulky.
Thanks guys! Good video!
Is this light bar better than Rouge Riders?
Where can I buy headlight bracket?
Noom Noom The bracket comes with the LED bar when purchased from our website.
Wolfhaus Co. sorry, I m meaning a small piece your holding on timing 1:47
"Next thing u wanna do is give urself a cool nickname."
Coming from a dude named Michael Cooper 😎 might want to start with being cool before you give yourself a cool nickname bra
Has anyone seen these installed on a road king?
Family Golchehreh Nope, it would probably look sick though!
Bruh I clicked on the link in the bio in it said viruses detected 😂
cmon fix yalls website, i clicked on it n it said virus detected, smh
The worse wire ties to ever use in the world, they will come lose and end up shorting out the lights
Please remove the ridiculous bar mounted turn signals
SO NEVER ANSWERED ANYONE REGARDING THE LIGHT GOING OFF IF YOU SWITCH TO HIGHBEAM?? MUSIC WAS AWFUL TO HAVE TO HEAR
Aces High There is a disclaimer in the product description on our website regarding the way the LED Bar. Thanks for your opinion on the music selection! Hope you have a great day.
K money wow no wonder you have line 75 subs🤣😂🤣😂🤣