I Bought a FAULTY Mini Game Box THING on eBay | Can I FIX It?
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2022
- With a very clear desciption of "it doesn't work", this Extreme Mini Game Box Emulation type thing is surely an easy fix?
It doesn't appear to display anything and it's unclear if it powers on or not. This one is going to be fun.
Hope you enjoy!
Steve
PS. I'm not an expert in repairs at all. I do this for fun, and it may not be the best or safest way to go about repairing broken stuff. I'm pretty good at melting plastic though. Please don't copy me - I'm an idiot.
SUPPORT ME on Patreon: bit.ly/ssf-patreon
MERCH: stezstixfix.com
AMAZON WISH LIST: bit.ly/ssf-wish
SUBSCRIBE HERE: bit.ly/ssf-sub
FOLLOW ME on Facebook: bit.ly/ssf-fbook
If you want to make a device donation to the channel, please use the following PO Box. Please note that this is not a repair service, and all items are non-returnable.
PO BOX ADDRESS: StezStix Fix?, PO Box 415, BOLTON, BL4 4AZ
N.B. Please only use this service if you are a UK resident and using Royal Mail.
Some of the magic things I use to break stuff;
My soldering iron: amzn.to/2Isf360
My hot air station: amzn.to/3kPxaBQ
My microscope: amzn.to/2VP3msU
My desoldering gun that goes "moo": amzn.to/3HHt73P
My multimeter: amzn.to/2LjBgnN
My thermal cam: amzn.to/3yPFhmT
My blue mat: amzn.to/3nDVs3A
Filming equipment;
My camera: amzn.to/38IdR7s
My 2nd camera: amzn.to/3Rfjn6U
My microphone: amzn.to/3rCriPc
VOS's mic: amzn.to/3pz2c1L
Links are affiliated where possible to help support the channel. Nice. - แนวปฏิบัติและการใช้ชีวิต
![ไม่ต้องมีที่ที่ให้ฉันอยู่ แต่ขอแค่มีฉันอยู่ก็พอ (Spaceless) - getsunova [SHORT FILM]](http://i.ytimg.com/vi/MuT0d_cvJkc/mqdefault.jpg)
Stupid Extreme Mini Game Box 8Bit Entertainment System Thing.
solid
Nice
Where is the xtreme? Also did you put back the sd card when you test it ? Great video, you are really creative with your flows¡¡
@@svt9800 it was the tune at the end🤣🤣🤣🤣
Interesting. Maybe a big shrink tube and that should take care of the lose wires or 3d print a new case with a larger port. Nice.
It went from "Why can't I fix this?" to "Why *DID* I fix this!?" surprisingly quickly 😆
What an epic bodge! Respect 👍
😊 thanks Chris, one of my best bodges I think!
Fixing that HDMI port sure looked like pain in butt. I wasn't sure you'd go further when it just snapped off from the board 😂. You're amazing 😘
Note to myself: remember to check the port before doing any soldering! 😇😇 SOLID! 👌❤
ˢᴼᴸᴵᴰ
honestly, i can say for myself that resoldering the port for nothing wouldn't be too much of a big deal, removing the solder mask on the other hand....
This channel should have at least 5 million subs, I love it so much, he’s smart, entertaining, funny, has a nice set up and everything
Noticed you left handsome out' just saying.
...and handsome (thanks Andrew) 🤣
@@andrewturnbull1027 and there’s that
“Disillusioned buffoon”, I actually laughed out loud. Excellent content; and you got it to work! Amazing! 😂😂
This also was my favorite part. That and Mario 14 lol
Man, this was painful, but glad you posted it. It’s important to see that extremely skilled people like yourself can occasionally have a project go awry. Reminds the rest of us that it’s okay when our own projects don’t always go TH-cam-perfect.
You could buy a panel mount female HDMI connector, redo the soldering and transplant everything into a slightly bigger case.
In a new video, of course. 😁
Just to let you know since subscribing a month ago I've gone and bought a soldering iron and today I fix a auto tyre inflator with a heavy-duty 12v cable and plug thanks for rekindling the reason people still fix electronic stuff other wise straight in bin 😄👌
Great job, I hope more people follow your example! I'm all for repairing stuff.
Love it! Congrats on the tyre inflator fix! 👍
Love it! The perseverance, or stubbornness, is amazing!! This channel is one of the best around! So entertaining with very cool items awaiting repair for another chance at life! Keep up the great vids, your closing in on 100k subs, so very well deserved and more. Long live Mario 14!
I agree, his perseverance is just magical and the way he keeps his cool hehehe… even if in the end he can’t fix it, it still is very satisfying to see him go through all the process… totally agree with you, the success he is having is totally deserved! Keep it going!
totally agree he never gave up
''love it'' how it went through all the trouble even butchering a HDMI cable or what it was even just so it can be botched to this messy device and in the end play a Mario 14 an ACTION GAME
LMAO OMG ROFL ......
If I haven't already had a OCD or ADHD then now I do, looking at the port and the games so as how it was presented on screen I legit wanted to jump into the screen itself and take it and toss it into the trash XD Because I doubt this even have some ways to mod anything and fix the games even, on top of it being on a trash device anyway that is doomed to fall apart after even a fart XD
On a related note this same masochistic mentality I see with PC gamers, they never seem to learn a damn thing and continue the masochistic way of life till the bitter end POOF. Just a tought is giving me anxiety and a headache imagine doing it .... ooof
Think this is a new comedy show then anything else, hopefully he makes some money on this video at least XD Otherwise I don't see the point LMAO
A lot of what happens here is pretty relatable, honestly. I haven't done any repairs like this, but there are other times when I was doing some tech support and forgot or neglected to check or try something simple before I jumped in to the more complicated parts. The end result being I missed something that should have been obvious and ended up making a hell of a lot more work for myself.
In my case it was something like "Does the pump on this AIO liquid cooler still actually work?", in your case it was "Are the pins on the inside of this port still okay?"
Then you spend hours desparately trying to sort out all the extra work you ended up making for yourself and alternately cursing, crying and quietly seething.
You did manage to get it working again though, so you got there in the end
Yeah and playing Mario 14 was all worth it for sure, an amazing ACTION game ... / sarcasm XD
GET IN THERE!!!! I can't believe you pulled that off! RESULTS!
A little bonus fact - that "Super Mario 14" game is a hack of Kaiketsu Yanchamaru 3, a Japan-only sequel in the short-lived KY/Kid Niki: Radical Ninja franchise.
Steve, mate. You may BE the best repair person on TH-cam with the way you commentate and joke while doing stuff. It's very refreshing. LOVE it.
Came for repairs, stayed for patreon rap! :)
I think the important thing to take away from this is that repairs are not always pretty, not always professional, but what's important is the end result. Does it work? Yes. Was the repair successful? Yes. That's all you need. Great work!
The most satisfying ending! You looked so defeated ☹️
Good Effort Steve, At least you got it working, although it probably wouldn't last too long....
Definitely won't last. I could go back and put heat-shrink over the wiring and add some glue or something, but it's probably not worth it for something like this. I'm sure another one will pop up at some point! 👍
@@StezStixFix Still a great job anyway. You're much like me. I've seen myself spend way to much time and effort on trying to fix stuff that's not really been worth it too!
Captain Bodge to the rescue!!!! With some valuable lyrical and narrative help from the ever helpful VOS!!😅😅
🤣 thanks Greg! Bodge and a half this one!
"Yeah, I can do this, OH! I'll do this, Oh! That's okay I'll recover the situa........." I so resemble this, I'm so pleased it's not just me.
You repaired that to a state of never wanting to plug it in again 😉 Great video as usual Steve - keep them coming
I actually sat refreshing my yt feed earlier, being impatient waiting for a new video to drop. I love the repair attempts, love the troubleshooting and particularly love the "stupid" things you attempt. Honestly, you're an inspiration.
Well done Steve ... just a shame your hard work wasn’t more richly rewarded game-wise. Keep up the great work 😀👍
Thanks Chris! Yeah, maybe should've picked a different game! 😁
Watching your videos gave me the courage to take apart a cheap, digital alarm clock I got that had a terrible rattle. It turned out to be a loose screw that was bouncing around inside the case. I was able to just screw it back in, and now the clock works fine. Simple fix, but something I might not have tried without having some idea of what the inside of the clock would probably look like. So, sincerely, thank you. :)
Since subscribing Steve, I’ve bought a blue mat, wick, solder, microscope, helping hands thingy, heat gun, tweezers, screwdriver set and a load of other “essential” stuff. Probably cost me £300 and I have so far managed to ‘fix’ an old Xbox I bought for £20 that is now worth about £21. But I did need to buy a new laser for it so I am out of pocket. It has been great fun though so thanks for motivating me and hope to make my money back in fixes by the time I either lose my marbles or pop me clogs.
lol, I have a similar story I'm really good at fixing things that cost less than $20, for example a hdmi to vga converter, a 5v dc adaptor both easy fixes, anything worth fixing is a no fix for me.
Ah bless! His little face @ 13:40!
What I love about this channel is there's no egos, he takes all the mess with a great sense of humor. I enjoy this channel a lot.
Hey Steve, Just wanted to say a big thanks. I've watched a fair few of these videos. A while ago I got into DIY synths. Built several units that just wouldn't work. This weekend I figured I'd take another look at them. Seemed that your techniques had been creeping into my brain as I found the faults and reflowed the solder, now it all works.
Great job Steve. fantastic you got it to work.
Thanks Frederick! 👍
Im happy to say this is my 5th channel im subscribed to. i dislike Subbing to channels that have no Worth and iv learned so much from watching that i want to see them all. thank you for your hard work on the videos and making my time on youtube not wasted.
I felt this one in my bones. Been there myself so I appreciated your perseverance. Glad it worked out in the end.
I know the device was originally a dongle. What you could have done was attach the other end of an HDMI port to the board. Then use an HDMI cable to connect the board to the monitor. This would allow connecting it and disconnecting it without stressing the connection on the board itself.
Isn't that exactly what he ended up doing?
@@VanisherXP Not quite. The module dangled only supported by its' wires. Another way would be to solder a socket, rather than a plug at the end of the module, so you could use a normal HDMI cable to connect it to your telly / monitor. Still, impressive that Steve got it to work in spite of the lifted pads.
"I'm so hip, I watched Steve before he became a lockpicker so he could fit all the Patreons into the 'opening sequence'."
Always enjoying whichever stupid game you got off of from ebay for us. :-)
Love it. Especially with morph appearing and your voice getting higher. Love the voiceover Steve. Basically I loved it all and I did chuckle too. Keep it up dear fellow.
That shows what a little determination and the will not to give up will get you. Well done.
Just watched this mate. Had me really chuckling. Loved it like all your vids. Keep up the good work.
Omg you're going to help me fix soo much, I'm frickin excited!
I really like this channel because i often do absolutely terrible looking repair job like that. it's good to find someone with the same spirit.
I would have throw that thing into the garbage after the first fail, you have WAY more patience than me.
I'm a recent subscriber and my immeasurable joy at the release of a new video was only tempered by the soldering near the end. "What is he doing??", I thought. "Fixing it! That's what!". Fine job, well done.
The best fix channel by far. Thanks for keeping me entertained.
I was so happy to see that thing turn on after all the effort put into!
Love your content bud
Love your channel, TH-cam recently recommended it to me. The deadpan British humour and electronics repair make me very happy 😃
This might be your best video yet. Awesome job everyone. Dave, VOS, etc. well done.
I love your sense of humor bro, and love your songs in the beginning keep it up fam ❤️
Great work! And well written lyrics as always :)
Love this channel! Look forward to your videos!
I thought you have failed to fix it! You sure made me smile when you got it working at the end! Congratulations!
I have been following you for a while now love your videos truly entertaining I work industrial maintenance have been showing my coworkers trying to get you more subs I do retro repair in my spare time thank you for what you do
Your perseverance is amazing! It would have probably gone in the bin after an hour if it was mine.
Fascinating, entertaining, educational and relaxing. Just a few words to describe your videos.
OMG that is dedication. Solid in the end :-) Enjoyed the vid thanks for sharing
Such great content! Very entertaining! Thank you!
Love the videos. Informative and funny. They always make me audibly lol.
Stez you done a great job ,great video 👍👍
lol it's alive, ALIVE! Well done Dr, FrankenSTEIN! Well done.
I feel you on this. I use to fix circuit boards when I was younger and sometimes they can be a nightmare.
Thanks man, you made me chuckle more than once!
Best repair I've ever seen!
Bro... your either way more patient or way more stubborn than I. Either way great job man, truly enjoy your videos!
Better than new (sorry Alec), no one will ever know you’ve been in it. This channel has everything, music, comedy, suspense and even a bit of electronics. Keep it up Steve, it really is a joy to watch!
you baffle me with your bars every time lol nice job!
I cant believe after all that ,you actually got it working. Great upload 👍.
Brilliant. Better than factory 🤣 Great video, Steve!
LOL! I guess you must watch Northridgefix too.
You took it to the EXTREME!!! .. keep up the great work ✌️
This is one of your best tracks i must say.
Enjoyable informative video as always 👍👍
Absolutely howling with laughter. 😂 Great videos.
My favorite video of yours so far. Reminds me of me snd my projects. Love the song at the end. My wife says your goofy.
i want to say i come here to expand my knowledge, but the truth is i love the funny editing a bit more. awesome stuff
Now that looked like some of my attempts lol good job!
I love the way he looks at that rat's nest of wire and cold solder joints and goes "NICE!!!". I'm cringing because I would never let anyone see my solder joints look like that. He is freaking hilarious.
I like that you even fix things that Aren't worth alot of money. Its cool you try to fix all kinds of crazy things :D
This gave me a much needed laugh, thanks 👍
Never skipping the best part of the video - best singing ever!) Thank you for videos!)
This may be the best of all of these videos.
Best one yet. This is totally something I would have done out of sheer inability to admit defeat. Awesome.
Excellent work
Nice interesting always enjoy watching your content 🔧🔧
Yey. I was wondering where you video was, turns out you were just taking the time to make it extra entertaining.
Annoyed steve is great.
Your best fix yet Steve, great entertainment, shame the games weren’t as good
Congrats on the fix.
Steve man your bars are... SOLID
This is the best one ever. I'm in tears 😂
5:12 well played Steve. Well played.
SOLID effort Steve.
😁 thanks Raccon!
"Disillusioned Buffoon" - LOL.... Not saying a word, mate!!
Your suffering makes me smile. When the HDMI came off I nearly cried with laughter. Keep up the great work.
I click for the task of "Mario with a stick" , BUT I stay for the singing at the end. always a joy :}
when the HDMI port popped off like a horror movie i had a hearty laugh!
Your vids are great, I wish I was capable of fixing things like this. I'm not a messy solderer but no way could I work on something as small as a hdmi jack. Am looking forward to your next upload.
I think the focus issue may have been the soft light reflection+blank screen messing with the auto focus? It seemed fine once your hands were holding the EXTREME device in front of it.
I'm amazed there were screws on the board and it wasn't just, like, glued into the casing. And those weak, bent anchor points? I bet the HDMI port got pushed in too hard when it wasn't fitting properly and it lifted all those traces. Wild how rough people will be with stuff. XD
Yeah, I think you're right on the focus, I need to angle the screen a bit next time I think! Those anchor points were terrible, no wonder it bent and ripped the pads. Terrible design! 😬
You can also test by placing a (green) post it note on the screen. Usually the camera then will focus on the post it note.
You Frankensteined the board. :)
Thanks Steve, great video as usual. Where did you get the microscope stand from?
Well that was fun.... your super bodgie fix worked like a charm !!!!! :) Nice work brother.
Great bodge work, Captain Bodge! 😁😁😁
Thanks Pedro! 👍
This video is exactly why I'm subscribed.
Amazing insanity to get that working
I've been there many a time, you know it's a lost cause but nevertheless for some unexplainable reason you press on, 9 times out of 10 it's a bin job but , like in this case, you get spawny ! Brilliant stuff!!
Sorry mate you had all that grief but you did persevere I hope you do get a proper plug on well done Steve keep up the good work 👍😊