Thanks for this, very useful. For others doing reassembly, I found that taking off the bottom plate and feeding the spring right through was easier. That way I could get the top (with more of the moving parts) settled with the pins in nice and easily, then just wrestle with the spring and baseplate.
No worries 🙂 And you're right it is way easier to go through the bottom for the follower and spring but TBH I often do it with one hand and the other one just holds everything in place. The fastest possible way 🤣 more time for shooting!
I also found out that undoing the baseplate on top of undoing the upper is easier than only the latter, as wrestling in the spring from the upper while still needing to hammer the pins together is a much bigger pita than wrestling the spring from below
Thanks for another helpful video, Ollie! Unfortunately, the tiny spring in the guide arm went flying into the void as I disassembled. Any idea what size spring I need to replace it?
The original TM ones are hard to come by at the moment, as is a lot of TM stuff annoyingly. However T8 do some, here's a link to JK who ship worldwide shop.jkarmy.com/riw-t8-enhanced-magazine-lip-for-marui-tm-mws-mtr-m4-gbbr-1pc.html
Thanks for this, very useful.
For others doing reassembly, I found that taking off the bottom plate and feeding the spring right through was easier. That way I could get the top (with more of the moving parts) settled with the pins in nice and easily, then just wrestle with the spring and baseplate.
No worries 🙂
And you're right it is way easier to go through the bottom for the follower and spring but TBH I often do it with one hand and the other one just holds everything in place. The fastest possible way 🤣 more time for shooting!
I also found out that undoing the baseplate on top of undoing the upper is easier than only the latter, as wrestling in the spring from the upper while still needing to hammer the pins together is a much bigger pita than wrestling the spring from below
Thank you!!! Very useful!!!
You're welcome!
Thanks, this is very helpful!
No worries, I've got loads of MWS stuff on my channel 😁
Thanks for another helpful video, Ollie! Unfortunately, the tiny spring in the guide arm went flying into the void as I disassembled. Any idea what size spring I need to replace it?
im not sure but if you check on the TM GBB owners discord it will have come up before so someone will know.
Same thing happened to me. I took apart an old mechanical pencil and cut the spring to fit.
좋은정보 감사합니다.
Hey Ollie, What size and dimension is that o ring at 2:03? Ive been trying to find ones that fit because of a mag leak. thanks!
hi where can i buy this mag lips? thank you
The original TM ones are hard to come by at the moment, as is a lot of TM stuff annoyingly. However T8 do some, here's a link to JK who ship worldwide shop.jkarmy.com/riw-t8-enhanced-magazine-lip-for-marui-tm-mws-mtr-m4-gbbr-1pc.html
Dude how tf did you remove those pins I can't get mine
A bloody hard smack, especially the first time