I dont know how this channel doesn't have more subscribers. You make it so easy to understand. I have been watching laser vids for years but just finally bought a 100 w co2. I have figured out some of lightburn but figured i would just go back and start from scratch instead of just figuring it out slowly.
Like many others I've watched lots of tutorial videos to try and get to grips with my Atomstack laser. I have to say this was by far the most informative of them all, well done and thank you.
Please do more Lightburn video's....this one was great. You are awesome at explaining things. Thank you for going slow, some other people just go so fast and click so fast before I can see what's going on and follow.
You are a great teacher! I first downloaded Lightburn and thought I'd never be able to figure it out, but with your simple explanations you just might be able to teach an old lady some new tricks...keep the videos coming!
EXACTLY what I needed. Thank you. I like when the presentation is made by an old guy. Because that tells me that you had to feel the same pain like I feel. Don't be offended, I am ~10 years older than you 😉. Again, thank you....Bernd
I just found your channel today! I received a xTool D1 for Christmas and have been having a lot of fun with it. I am also new to Lightburn and your videos have really been helping me out! Thank you, thank you, thank you!!!
Young man . I want to thank you . Ive been oulling my hair out trying to learn this stuff . Watching lits of videos and even the instructions baffles me . Ive always had a bad learning curve and have had a great time in life gettingvit all half right . . I got nowhere with sll 8f them . You just clearly taught me this stuff to get me started . Half way though i already had text and photos in the work area and editing thank you so much . Now if I could just get the program to talk to my laser I need a newer computer.
Hi i am new to this, and at the age of 62, I give it a go I have a ortur laser master 2 , it’s only a small laser, and lightburn software, I am dyslexia, and I have looked on lots of videos of lightburn, ,which is hard to follow, but know I have found your videos on lightburn , it’s starting to make sense, a big thankyou to you for your time and skill ,Neil
I got Lightbourn to connect what it was. The whole time was a cable USB cable that came with my laser was no good so I went and got another one. Everything showed up my driver everything so I’m now I’m trying to learn how to do the engraving. Thank you again.
@@computercreationz yeah I’m still learning it. I’m trying to make my first engraving, but I don’t know where to start. I gotta bring files into my library and watching videos on TH-cam help me out a lot but sometimes they go too fast cause I try to follow along with the video, but hopefully I’ll figure it out cause I’m excited to do my first cut.
@@computercreationz as a newbie to LightBurn ... do you have a video out on how to set up the colors on the bottom of the page and transferring art to screen?
Thanks for teaching so that I understand. I have learned more watching this one video then I did watching 10 of someone else’s. Please continue to teach I’m a subscriber
THANK YOU! I know it has been awhile since you posted this, but I just got my XTool D1 and I have been struggling with positioning my material. Your video cleared all the fog! Keep up the great work!
Thank you finally someone that knows how to TEACH . I don't have to go get the book laser for dummies. Thank you I need to figure out how to send you a gift much appreciated. I am very new to this game of of Lasering.
This has been the BEST video I have watched on Lightburn so far. Your simple explanations make it easy to understand and comprehend exactly what you are explaining. I can't wait to watch your other videos and see what you have planned for the future! Thank you so much.
I've wondered about all the icons on the bottom. I'm glad I'll be able to rename and input the Spd/Pwr. That alone was worth watching the entire video. 😁
You're awesome! Seriously! Thank you so very much for doing all of these videos! I still have months until my laser arrives...but I'm trying to use this time and take all of this stuff in so I can get rollin' right away! Again...THANK YOU!!!!
Congrats on your laser purchase, I know before I got my laser I spent allot of time on TH-cam taking in anything I could watch, It really helped. I appreciate your comments!
This video was very helpful and starting to learn Lighburn on my new laser. Enjoy your new sub; looking forward to watching more of your very informative videos. Continued successes to you!
Great video for beginners!! Really appreciate it! Moving from Inkscape/Glowforge to a much bigger machine with lightburn and this bridged a huge learning gap for me!!
Excellent video. Helped me get up to speed much more quickly with right level of tell us and then show us. Video pacing was just right and I really enjoyed working along in lightburn. Thanks. John Z
I'm new to laser cutting and Lightburn. My Mira9 is on order and won't be here for awhile, but I'm trying to learn and familiarize myself with the software. I think this was a great video! Even though I haven't had an opportunity to use it, this video has made it not so intimidating already! Can't wait to watch the others. Thank you so much for your time!
Love your videos. Each one has clear, uncomplicated instructions for each step. One of the best Laser/Lightburn channels I’ve watched (and I’ve watched plenty!) Look forward to more.
Thanks so much for this very clear demonstration and tutorial. This was the best training I've seen by far, you did it at a speed I could easily follow. Really appreciate that. You earned a subscription sir...and a like!😂 Andrew
Really found some good info on this video. I am now a subscriber, going to check out all your other videos, they're just what I need. Many thanks for your efforts.
Thanks for the tip about the notes, that one I didn't know. A counter opinion about making adjustments at the controller. I try not to make any adjustments at the controller unless I have to because the membrane switches on the controller have a very finite lifespan. Once one of the membranes breaks, that button will stop working and they cannot be repaired only replaced. Since these membrane switches mount directly to the main PC board in the controller, if any moisture gets through a cracked membrane your controller is not long for the world. Your computer mouse is much easier and cheaper to replace.
Very nicely done, learned a couple things. Didn't know what the T colors represented when they were added, and the big one for me was being able to drag the screen around. Been using the scroll wheel to zoom in and out, especially using the editing tool, but the lack of pan bars drove me nuts. One thing about changing the settings of the colors, something I found that can be done if you wish to keep default on start up, but want to change a few for a specific job. Open TWO lightburn sessions, work in one where you make all your changes, and when done, close it first. When you close the second LB window, all the default settings will be saved. This way if you have them all laid out for average jobs, and you need to modify one for just one particular job, you can without disrupting the normal levels and names. What I like about Lightburn is that you can run multiple windows at once, though only the first controls the laser, it allows you to import an SVG or DFX with multiple parts, and you can cut out individual parts, work on them in another window, and save them as single parts. I do a lot of RC airplane parts and this is very helpful for me. If I want to test cut the parts, I import into the second LB window and cut them from there so I can cut from the primary window. I just with is had a dimensioning tool for those angled slots, so the proper degree can be made.
Oh thanks a million, you solved a big problem I’ve had!👌🏼👏🏼it was so difficult to solve as I didn’t know what to do a search for. Tip number 8, where instead of outlining the object, I can outline my design. So appreciate this & each video you make. You are so down to earth & talk in basic language making everything so understandable. Kind regards, Denise in Australia 🇦🇺 😊
Awesome , never knew how to change power on the fly using the controller , I would always change it in Lightburn and resend the file , great tips , thank you for all your hard work making these videos to benefits others 👍
Hey, I've been watching your videos and this one is really helpful , thank you so very much. Being very new to and actually my very first time using any graphic designer tool, I am very appreciative of all you do for us newbies.
Thank you so much for your super user friendly video. Brand new to laser (just got mine set up tonight). Looking forward to more. I use a silhouette cameo and the software for that is very similar to this so thank goodness it wasn’t all gibberish ☺️. Very easy to learn from ya, thank you!
Mate what a great video, i know it’s a couple of years old but thank you for the way you explain things. As a new user this is so valuable as it is easy to understand. Many thanks. Nb have you done any updates on this with most recent versions of lightburn
FINALLY someone who I understood step by step. Thank you
Rochelle, thank you for the comments, I appreciate it!
Uo
I dont know how this channel doesn't have more subscribers. You make it so easy to understand. I have been watching laser vids for years but just finally bought a 100 w co2. I have figured out some of lightburn but figured i would just go back and start from scratch instead of just figuring it out slowly.
Thank you for the kind comments, I appreciate it!
I learned more from these tips than I've learned from multiple videos I've watched. Thank you!
Like many others I've watched lots of tutorial videos to try and get to grips with my Atomstack laser. I have to say this was by far the most informative of them all, well done and thank you.
Awesome, thank you!
Still battling with my Atomstack m8
What a Guy Pure natural teacher
Will be back on a regular basis
Thanks very much
You're very welcome!
Please do more Lightburn video's....this one was great. You are awesome at explaining things. Thank you for going slow, some other people just go so fast and click so fast before I can see what's going on and follow.
Thanks, will do!
You are a great teacher! I first downloaded Lightburn and thought I'd never be able to figure it out, but with your simple explanations you just might be able to teach an old lady some new tricks...keep the videos coming!
I appreciate the comments and thanks for watching. I too learn something everyday.
I feel the same way!
EXACTLY what I needed. Thank you. I like when the presentation is made by an old guy. Because that tells me that you had to feel the same pain like I feel. Don't be offended, I am ~10 years older than you 😉. Again, thank you....Bernd
Glad it was helpful!
Thanks so much I'm 50 and I just bought my first laser nova 63. Your videos are super helpful geared for the everyday guy. I thank you
I appreciate your comments, congrats on the big boy! that’s awesome!
Sometimes I feel so stupid. You're still the best. Thanks ..... Nat
AS a new beginner, I'm enjoying the simple way you explain things. You are awesome Thanks
Glad to help! Thanks for watching.
I just found your channel today! I received a xTool D1 for Christmas and have been having a lot of fun with it. I am also new to Lightburn and your videos have really been helping me out! Thank you, thank you, thank you!!!
Awesome! Thank you!
Excellent instructional presentation. I learned more in this presentation than I have from many others. Thanks, I will seek out your other tutorials.
Awesome, thank you!
Young man .
I want to thank you . Ive been oulling my hair out trying to learn this stuff . Watching lits of videos and even the instructions baffles me . Ive always had a bad learning curve and have had a great time in life gettingvit all half right . . I got nowhere with sll 8f them . You just clearly taught me this stuff to get me started . Half way though i already had text and photos in the work area and editing thank you so much . Now if I could just get the program to talk to my laser
I need a newer computer.
I appreciate your comments, so glad this content is helpful to you.
As a new laser user, I find more information on your channel than all of the other post put together. Thank you!
thank you for your comments, I appreciate it!
Thank you for all this information. You do not know how you have been a life savior to us newbies in the world of laser
I appreciate the comments
Hi i am new to this, and at the age of 62, I give it a go I have a ortur laser master 2 , it’s only a small laser, and lightburn software, I am dyslexia, and I have looked on lots of videos of lightburn, ,which is hard to follow, but know I have found your videos on lightburn , it’s starting to make sense, a big thankyou to you for your time and skill ,Neil
I appreciate your comments
Thank you from the bottom of my heart ❤️ when I opened up light burn it was I bit intimidating now just watching this video I feel more confident
You're so welcome!
I got Lightbourn to connect what it was. The whole time was a cable USB cable that came with my laser was no good so I went and got another one. Everything showed up my driver everything so I’m now I’m trying to learn how to do the engraving. Thank you again.
I hear about bad cables all the time so glad upi got it figured out !
@@computercreationz yeah I’m still learning it. I’m trying to make my first engraving, but I don’t know where to start. I gotta bring files into my library and watching videos on TH-cam help me out a lot but sometimes they go too fast cause I try to follow along with the video, but hopefully I’ll figure it out cause I’m excited to do my first cut.
I literally just got lightburn and ordered my ts3 laser, only used the wainlux k6 but that was super basic with only 3 settings. Thanks for teaching!
My Pleasure
Although I have a diode laser, without an onboard controller, your tour through LightBurn was very helpful. Thanks!
Glad it helped!
Just got LightBurn ... and was semi clueless ............ you have really helped me out !!! Thanks .. I'll be watching all of yours.
Thanks I appreciate you input. Thanks for watching.
@@computercreationz as a newbie to LightBurn ... do you have a video out on how to set up the colors on the bottom of the page and transferring art to screen?
@@seagnatprepper9613 check out my video on Lightburns art library, very handy
Thanks for teaching so that I understand. I have learned more watching this one video then I did watching 10 of someone else’s. Please continue to teach I’m a subscriber
Glad it was helpful! thank you for the sub!
I love that you start with ‘thank for stopping by’. That’s spectacular. You’re a righteous dude!
Thanks Ginny, I appreciate the comment. Have a great day!
Agreed, much nicer than hey, whats up that everyone else uses.
THANK YOU! I know it has been awhile since you posted this, but I just got my XTool D1 and I have been struggling with positioning my material. Your video cleared all the fog! Keep up the great work!
Glad it helped! thanks for the comment
Liked and shared.
These tips are priceless for those of us that are just beginning.
thank you for your comments!
That was a great video. Thanks for those tips. They will make my early weeks of laser engraving much easier.
Glad it was helpful!
Great in-depth tutorial sir!!!! My questions have been answered.
Glad it was helpful!
10 stars if i could! best videos to easily understand and get burning on this laser !!! thank you !!
Thank you
Frame speed is so good to know, it was too fast that I used to frame it to many times until I thought I was right. Thank you
Glad it helped! Thank you for watching
Thank you
finally someone that knows how to TEACH .
I don't have to go get the book laser for dummies. Thank you I need to figure out how to send you a gift much appreciated.
I am very new to this game of of Lasering.
I appreciate the complement, thank you for watching.
This has been the BEST video I have watched on Lightburn so far. Your simple explanations make it easy to understand and comprehend exactly what you are explaining. I can't wait to watch your other videos and see what you have planned for the future! Thank you so much.
Thanks you for your input, I appreciate it. Lots of great stuff in the pipeline!
Thank you so much Sir. I got my laser today and you ve given me a life long lesson
Happy to help, thank you for watching!
Incredible information! We thought we had Lightburn down, but this brings us up to another level!
that’s great news! I appreciate the comments and watching my videos!
Just got my laser and this video was amazing. All the tips were exactly what I needed.
Glad it helped!
I've wondered about all the icons on the bottom. I'm glad I'll be able to rename and input the Spd/Pwr. That alone was worth watching the entire video. 😁
thanks for the comments
BEST VIDEO. I learned so much.. thank you so much!!
Glad it was helpful!
You're awesome! Seriously! Thank you so very much for doing all of these videos! I still have months until my laser arrives...but I'm trying to use this time and take all of this stuff in so I can get rollin' right away! Again...THANK YOU!!!!
Congrats on your laser purchase, I know before I got my laser I spent allot of time on TH-cam taking in anything I could watch, It really helped. I appreciate your comments!
Thanks for the good direction yur video is easy to follow and for a new laser and lightburn user I appreciate your instruction.
You're very welcome!
Thank you so much for spending the time on this video I have basic computer skills and this is so informative. I sincerely appreciate it!
You're very welcome!
Totally satisfied, you are a great teacher, explained so briefly , superb BOSS
Many many thanks
This video was very helpful and starting to learn Lighburn on my new laser. Enjoy your new sub; looking forward to watching more of your very informative videos. Continued successes to you!
Awesome, thank you!
Best tutorial I’ve ever seen for the lightburn sofar👍🏻👍🏻👍🏻👍🏻👍🏻
Wow, thanks!
Thank you!!! 🙏🙏
By far one of the most useful videos I've ever found here or anywhere. You've saved me a lot of frustration.
Glad it helped!
Great video for beginners!! Really appreciate it! Moving from Inkscape/Glowforge to a much bigger machine with lightburn and this bridged a huge learning gap for me!!
Glad it helped!
Excellent video. Helped me get up to speed much more quickly with right level of tell us and then show us. Video pacing was just right and I really enjoyed working along in lightburn. Thanks. John Z
Glad you liked it!
Glad I found this video. Answered a few questions I had about basic LightBurn functions. 👍
Glad it was helpful!
Fantastic video, took me a while to find a video with these type of instructions, how to use my laser to send a design for the very first time!
Glad you liked it!
This was super helpful. Looking forward to my Longer Ray5 arriving tomorrow
Glad it was helpful!
Fantastic tutorial!!! One of the best!
I want going to try lightburn, but now I will.
You are a wonderful teacher
lightburn is a great software, give it a try
GREAT JOB, VERY INFORMATIVE, GREAT FOR ANYONE NEW TO LASERS
Glad you enjoyed it. Thank you
Brand new to laserering. Quite. informative. Where are your other lightburn videos. You do a great job
The majority of my 160 videos are LightBurn related, spend some time on my channel. You will see I cover allot of topics
Great, great video and tips. New to this laser stuff and waiting for my machine to come. Will download light burn and have it ready to go!
Have fun!
I'm new to laser cutting and Lightburn. My Mira9 is on order and won't be here for awhile, but I'm trying to learn and familiarize myself with the software. I think this was a great video! Even though I haven't had an opportunity to use it, this video has made it not so intimidating already! Can't wait to watch the others. Thank you so much for your time!
Congrats on your new machine, LightBurn is great software and you can do allot with it. Thanks so much for your comments and input.
An excellent tutorial on LightBurn! Thank you for putting this together. It is appreciated very much. I am glad I found your channel!
Glad it was helpful!
This is just what I've been looking for. New to Lightburn.....So Thank You very much! Jim
Glad to help!
Thank you for this video. For a graphic designer moving to CO2, this a walk in the park
Glad it was helpful!
I needed this video..before totally being a noob last night .my lettering was even mirrored somehow
allot of the time it’s because your home origin is not set correctly
Outstanding videos - I am brand new and have learned more from your videos than any other....Thank you !
Thank you for your comments
Love your videos. Each one has clear, uncomplicated instructions for each step. One of the best Laser/Lightburn channels I’ve watched (and I’ve watched plenty!) Look forward to more.
Wow, thanks! really appreciated your comments.
Thanks so much for this very clear demonstration and tutorial. This was the best training I've seen by far, you did it at a speed I could easily follow. Really appreciate that. You earned a subscription sir...and a like!😂 Andrew
I appreciate the kind words. Thank you!
Learnt a lot on your channel. wish I would have used this as the very first Lightburn tutorial . thank you very much. new subscriber for sure
Thanks for the sub! and the comments
Just bought a used Atomstack P7 and this was really useful in getting to know some settings. Will be watching through other videos. 👍
Glad it was helpful!
Love the way you presented this. Liked and subscribed.
Thanks for the sub!
Best Training for sure! I'm so impressed Robert! Thx for your time and expertise - and the easy teaching style!
I appreciate your comments!
thanks so much! i think you explained framing better than another popular laser youtube guy. i won't say his name
Thank you for your comments, I appreciate it!
Really found some good info on this video. I am now a subscriber, going to check out all your other videos, they're just what I need. Many thanks for your efforts.
Awesome, thank you!
Thank you very much SIR , your tutorials are Amazing .
thank you I appreciate your commemts
What a great help that was!! I will be watching it several more times. This really helped to fill in a lot of blanks. THANK YOU!
Glad it was helpful!
Thanks!
Debra, thank you very much for the contribution to my channel. I truly appreciate your comments and the donation. you just made my day!
@@computercreationz you make my day every time I watch your videos. I'm so glad I can do the same for you today. Thanks for all your hard work
Great video, well explained, very useful. Well done.
Many thanks! I appreciate your comments
Thanks for the tip about the notes, that one I didn't know.
A counter opinion about making adjustments at the controller.
I try not to make any adjustments at the controller unless I have to because the membrane switches on the controller have a very finite lifespan. Once one of the membranes breaks, that button will stop working and they cannot be repaired only replaced. Since these membrane switches mount directly to the main PC board in the controller, if any moisture gets through a cracked membrane your controller is not long for the world. Your computer mouse is much easier and cheaper to replace.
Thank you so much. Brand new to lasers. Love all your videos! Would love to see more!
Thank you! will be making more
Very nicely done, learned a couple things. Didn't know what the T colors represented when they were added, and the big one for me was being able to drag the screen around. Been using the scroll wheel to zoom in and out, especially using the editing tool, but the lack of pan bars drove me nuts. One thing about changing the settings of the colors, something I found that can be done if you wish to keep default on start up, but want to change a few for a specific job. Open TWO lightburn sessions, work in one where you make all your changes, and when done, close it first. When you close the second LB window, all the default settings will be saved. This way if you have them all laid out for average jobs, and you need to modify one for just one particular job, you can without disrupting the normal levels and names. What I like about Lightburn is that you can run multiple windows at once, though only the first controls the laser, it allows you to import an SVG or DFX with multiple parts, and you can cut out individual parts, work on them in another window, and save them as single parts. I do a lot of RC airplane parts and this is very helpful for me. If I want to test cut the parts, I import into the second LB window and cut them from there so I can cut from the primary window. I just with is had a dimensioning tool for those angled slots, so the proper degree can be made.
Thank You I appreciate your comments. I know when I found some of these options it made getting around so much easier.
@@computercreationz I actually let out a WOOHOO when I saw where you can move the screen with the mouse!
Oh thanks a million, you solved a big problem I’ve had!👌🏼👏🏼it was so difficult to solve as I didn’t know what to do a search for. Tip number 8, where instead of outlining the object, I can outline my design. So appreciate this & each video you make. You are so down to earth & talk in basic language making everything so understandable. Kind regards, Denise in Australia 🇦🇺 😊
Thank you for the comments, I appreciate it. Glad I could help!
Loving that framing speed tip!!!!
Yes, now you can slow it down so you can see exactly what’s going on. Thank for the comment
I’m just starting out - this is soooo helpful - thank you.
Glad it helped
Thank u sir , it helps me a lot.
God bless you 🙏
Always welcome
Awesome , never knew how to change power on the fly using the controller , I would always change it in Lightburn and resend the file , great tips , thank you for all your hard work making these videos to benefits others 👍
Glad I could help! that is a big time save for me as well. thanks for your comments I appreciate it.
excellent video and very helpful. thanks so much for taking the time to share your knowledge.
Glad you enjoyed it! Thanks for watching!
Amazing video, my laser comes tomorrow and I feel a little less intimidated now
congrats on your new laser, glad these vids helped
Excellent tutorial 😊
Hey, I've been watching your videos and this one is really helpful , thank you so very much. Being very new to and actually my very first time using any graphic designer tool, I am very appreciative of all you do for us newbies.
thanks for the comments and watching my videos
This is an awesome training for newbies. Thank you so very much for doing this video. I give you 💯 and subscribed to your channel
Thank you for your comments, I am glad its helpful.
another good video for a newbie
Thanks for the comment and watching my videos
This is really helpful. Thank you!
Glad it was helpful!
Thank you so much for your super user friendly video. Brand new to laser (just got mine set up tonight). Looking forward to more. I use a silhouette cameo and the software for that is very similar to this so thank goodness it wasn’t all gibberish ☺️. Very easy to learn from ya, thank you!
I appreciate your comments, thank you so much for watching. Congrats on learning how to create on a laser, it’s so fun!
Great tips for Lightburn, Thank you!
Glad it was helpful!
Excellent tutorial . It was just what I needed.
Glad you liked it!
Mate what a great video, i know it’s a couple of years old but thank you for the way you explain things. As a new user this is so valuable as it is easy to understand. Many thanks. Nb have you done any updates on this with most recent versions of lightburn
Glad you enjoyed it, yes I have a couple of others that are more updated on my channel. they all have a black background so they are easy to find
thank you for this video, I am just looking into which laser i am going to buy and this video will be so helpful and looking forward to more.
Glad it was helpful!, good luck with your search in finding a laser there is allot to choose from
@@computercreationz well we took the plunge and ordered a 80w from OMTech. now to learn Lightburn. fingers crossed. =)
@@jeaneenbeagley1637 Congrats on your new laser, Im sure you will love it. Once you get the hang of Lightburn the sky is the limit!
Congratulations on your 1000 subs! 🙌🏼🙌🏼🙌🏼
Thank you so much!! I enjoy your channel !
@@computercreationz aww thank you, fellow TH-camr. Here’s to an awesome 2021!
You are a wonderful teacher!! Thank you for taking time out to record these videos. MUCH appreciated!! ~Pam
Thank you for your comments, I appreciate it!
Thank you , You are helping me lot with this video.
You are most welcome
Love your tutorials
Glad you like them!
Thank you for this video... It was a great help
Glad it helped!
Awesome great video! Thank you
Glad you liked it!
I didnt know the push scroll. Thanks.
Always left thumb on keyboard.
thank you for the comment
Thank you very much for detail video
You are welcome, and thanks for watching my videos
Awesome video for someone new like me. Going to sub. Thank you
Thanks for the sub!