Petrol Gas LPG NG Generator Carburetor Conversion Installation
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Installing the petrol-gas (LPG) carburetor converter is very easy. Watch and install yours in minutes.
If you have any questions/comments/correction/suggestion regarding this video, please drop them and I'll respond as much as I can.
Apologies for the wrong words used at the wrong times. I hope you understood the video as that's what this video is about.....to make it simple for you to do.
Every other thing is secondary.
Get yours HERE (2kva - 2.8kva)
paystack.com/p...
Likeeey and SUBSCRIBEEEY please. - แนวปฏิบัติและการใช้ชีวิต
Very detailed.
Much appreciation and love from Uganda
@@esuthefarmer6540 you are welcome
from Iraq... I did this experiment, , saving fuel and money. Thank you for making this
you are welcome.
شكرا جزيلا على الرغم من اني لا اتحدث الانكليزيه لاكن فهمت بصوره بصيطه جدا وشرح كان مفصل ودقيق شكرا جزيلا لحضرتك الكريمه.
You are welcome Boss. I'm glad you found it useful.
Best video instruction I've come across so far clear and concise
Thank you. I'm glad it was useful.
Thank you so much Bro, this video is the best for gas carburettor installation.
More grace
You are welcome. Appreciate.
شكرا لك على هذا المجهود الرائع
You are welcome.
Thank You very much for that detailed video
You are welcome!
You will make a great teacher👍
Smiles.....thank you.
hi, I just want to ask if where did the gas came from and how it was transferred from the cylinder using the generator.Like where did you connect the biogas to enter from the cylinder.Because i'm doing a research about it.I hope you will respond immediately.THANK YOU....
Here is the flow or touch points
cylinder - regulator - hose - gas carburetor - generator
do you understand?
I'm an engineer SLY by name.. I came in contact with ur video!! So want to ask what really make the gas carburetor go off after 30mins or 1hr, then also the gas carburetor always give hard start compared to the fuel, why??
Hello Engr Sly. thanks for watching my video.
1. Most times the gen goes off when the gas doesn't flow enough to sustain the generator's operation. If you didn't open the regulator's knob enough, please open it "half turn" and observe. By this, I'm certain it won't go off anymore.
2. When you say 'hard start', do you mean it doesn't start easily?
I think is that knob on the converter, you need to push it in so it will keep drawing gas from the cylinder to the generator, just as you would turn your fuel pump on when the generator is on ...
Thanks for the video.
My question is, the converter is the same for all generator carburetor and the gas hose what's the size?
Can one use his cooking gas cylinder for the operation?
1. The converter is different for each generator's capacity group (2.0kva - 4.5kva, 4kva - 6kva, etc)
2. Yes, you can use gas hose. Use the correct size that will fit perfectly on both the carburetor and regulator inlet.
3. Yes, you can use cooking gas cylinder for the operation.
Lastly, please check all your fittings and ensure you don't have a leak.
Good evening please whenever I switch to petrol my generator starts immediately but when I'm using gas it takes 10 to 15 minutes And even take it up to 20 minutes for you to start with gas then for that regulator there's NG there's LPG is it when the NG is pointing vertically up that's when we should use it for the LPG should be the one pointing vertically up
Using this other video's link of mine, you will get answers to the questions you asked.
th-cam.com/video/ae79GzihlSE/w-d-xo.html
labelling on the gas carb
skip to: 1.05
delay in starting using gas carb
skip to: 3.52
more questions? ask me.
Very useful content, thank you so much!
You are welcome
Yeah! The choking is similar with my generator. Just installed mine yesterday
Great. I hope it's working fine.
I have installed on my gx390 engine but it rarely powers 1hp Air-conditioning nor regular water pump unlike before. It's so annoying I wonder if anyone experienced same
@@frankiefeller9079Whats your gens capacity please?
What country are they producing these carburator..
No idea......
china ?
How can I order those carburator
I am an engineer Kross,I did my as well,but it consumption was too much how do we adjust the gas from the gen,for a lesser consumption,sir
What was your consumption like? What was your load like? If you can provide some information, that can help to figure out why. Lastly, from your consumption comparted to petrol, does it pay?
I have same issue
I use 3kg for 6hrs
While I have a friend of mine used it for 11hrs. Same 3kg and same gen
Hi. Did you buy the carburetor from the same place please? I've been made aware that there are inferior of those carburetor that won't work well.
same gen, same 3kg, ,SAME LOAD?
@@easyfind01 no
Just came across your video on TH-cam
@seyigloriousdoubledouble Oh okay. Glad you found it informative. Load actually determines how long it'll last as well. If your friend's load is say 30% and yours is like 60/50, you will definitely have a lower duration. The way to look at it is that you compare your usage while using petrol with YOUR Own gen VS LPG. Do you get it please?
This engine can run on h2o geas
Are you serious? Which one is H2o Gas by the way?
Is it normal to hear noise when the cylinder is connected
@@obanibimonifelix4531 what kind of noise? Like a hissing sound?
@@easyfind01yes very serious one and the Gen refused to start
@@obanibimonifelix4531 where is the noise coming from? Cylinder side (hose or regulator) or from Gen side (hose connected to gas carb, carb itself or from the generator itaself)?
There should be no noise at all.
Alert: check your engine oil ⚠
@@easyfind01 it's from the carb and it's a heavy noise
@@obanibimonifelix4531 you might need to change the gas carburetor as the noise from my experience kind of means that the knob you press before starting the gen has pressed and stayed in the pressed position. Meaning it's constantly drawing gas. It's DANGEROUS. Please see if you can take apart the gas carb and repair. If you can't, you need to change it please.
Super une bonne rénovation
merci beaucoup
nice work bro, i did mine but when d gas gets to quater of cylinder level it goes off, pls what could be cause of that
How did you know it's a quarter remaining?
If it worked fine from when you fill up the cylinder to when the pressure is low. Then your setup is fine and I really don't think there is anything that can be done. Once pressure is low, the generator starts to stall.
@@easyfind01 i know because am using a transperent cylinder
Oh that's cool. However, as I stated earlier, I think we'll have to take the stalling as it is. I see no way around it. It's a good thing you have such cylinder, you can easily switch the gen off once it's approaching the quarter mark cos the stalling from this gas usage in my opinion can damage gadgets if you don't switch it off quickly. What do you think?
Ok, thank u
@@brightlucky4177 you are welcome
I used this for the first time today. It worked fine then i turned it off. When i tried to turn it on again, it starts then backfires. What could be the cause
Please start by checking your spark-plug. Remove, clean and/or replace (as the case maybe), and try again. One more thing, be sure the gas is being supplied to the carburetor.
@@easyfind01 is this universal
I urgently want one...how can you assist
@@tenaziomwanza634 what's your location? send me a mail and we pick it up from there.
@@easyfind01 hi
I'm located in lusaka ibex area...
@@tenaziomwanza634 checking.....
@@tenaziomwanza634 Shipping alone to Zambia, Lusaka will cost approx 4k kwacha. I'm guesting that will be too costly. You might want to check in your vicinity.
How much is the carburator?
@@MongokiMoitsiniki $20
when are you go to make your 2nd phase video for update on how long does 1kg runs
The update will be uploaded today.
th-cam.com/video/JDeqFybvJ0c/w-d-xo.html
The orange switch on the cabuerator, what does it do?
@@efeanderson689 it is to switch the carburetor to either LPG mode or NG mode. However, this one came as LPG by default.
@@easyfind01 what direction is the Lpg mode, cos mine is on the right by default
Need to know what size pressure regulator and hose I need to get any information would be greatly appreciated
The regulator I used is called "campingaz regulator". It's a low pressure regulator and the hose size is 8 x 14.5mm gas hose.
Nice one 👍
Thank you
Most of you complaining about the consumption check is your gas component has leakage somewhere
Thank you.
Great!!! engine run even smoother...
Yes it does!
Please may you create a video how to connect a gass cylinder on petro egine water pumps. Thx
I could try. However, I do not have the machines/materials at my disposal. What is the petrol engine pump's capacity you intend to convert to gas please? I could guide you on how to install it if I see it.
i need ur contact ans how ican get the gas conveter
please send a mail to genuineelectronix@gmail.com
or
Get it here (2kva - 2.8kva)
shorturl.at/dgEIK
Hoy to order?
@@easyfind01❤
Please what could be the problem.when I use gas with my generator it won't work but when I switch to petrol it will work
Hmmmm, this is quite strange. It should work. Let me start by asking: have you used the gas with the generator before? I mean has it ever worked with it before?
I think the generator is not a gasoline generator.
Not all generators work with gas, check if your generator is gasoline...
Please provide details of the generator; name, model number etc.
How can I get 1..??am from Papua New Guinea..
I have one brand new which can be sent to you incase you do not have it in your vicinity.
How can u send 1 to me..
@@BanahHamps when do you want it?
@@BanahHamps send a mail to me via adeyemiadepo@gmail.com and we will take it from there. I can get it over to you as fast as possible.
Nice video ❤
Glad you liked it
How long can 6kg last on 2.8kv generator heavy load?
By saying heavy load, I assume you mean using >= 70% load on 2.8kva gen. Using preliminary result of my tests, you should have about 15 hrs usage. However, details of my tests will be uploaded soon.
If your correct 15 hrs for 6kg then it will be useless on my view because the price of filling 6kg is similar to the price of petrol to run more than 15hrs
@@simonpeter4884 Please take note of the word "preliminary". I can only conclude when I'm done with the test buddy.
th-cam.com/video/JDeqFybvJ0c/w-d-xo.html
Mine rarely powers heavy loads . It stutters and goes off!
Very educating, l need one
Please visit here to get one: paystack.com/pay/petrolgascarb_diysimple
Will it fit with any generator?
what is your generator capacity?
I'm interested
I have, if you want.
A kg goes for 3 hrs 18 min on my elepaq 4500 watts
Meaning if you use 6kg cylinder, you will be getting about 19hrs usage? That's wonderful. What's your load like?
How much does is this convertor
30k or there about.
Please how can we get the carburettor and the price.
Get yours HERE (2kva - 2.8kva)
paystack.com/pay/petrolgascarb_diysimple
I have the regulator as well and could be packaged together. Let me know if you want the two.
I can help you buy the carburetor and fix it please your location
How many hours did the 3kg Gas last?
I am on the 3rd set of test i.e utilization of 3kg three times in a row. I should exhaust the 3rd soon. I will upload details of the results.
th-cam.com/video/JDeqFybvJ0c/w-d-xo.html
What’s the work of that pink thing on the carburetor?
@@seyigloriousdoubledouble it's to change the carburetor mode to either LPG or NG. By default, I think they all come locked to LPG.
@@easyfind01 ok
How is that done
Saan pede pagawa Ng Cpu auto Lpg
Saan ka nagmula?
Were can I find it?
Find what? You mean the carburetor?
@@easyfind01 yes
it's readily available in most generator parts market. it's price ranges from 18k - 28k.
if you are unable to get it, I can get you one, message me at genuineelectronix@gmail.com
Share the buy link
@@narrendravishwasharma1359 You can get yours here 👉👉 paystack.com/pay/petrolgascarb_diysimple
😮😮😮😮😮😮😮😮
what? Lol