Thanks for taking the time to share, but if you had 4 cell phones, and you don't press the "hang up button"... it does the same thing. AKA. when I use these, C will talk to Rider D, but when they are done talking press the "PHONE" button to end the call. THEN rider C can talk to rider E, then when they are done one of them has to hang up. If you would have had the microphones hooked up in this tutorial I think you would have realized they were still on vs looking at lights flashing. So if you are reading this, hook the gear up to them so you hear the "BEEPS" or else you may as well grab a snickers we're gonna be here a while.
I had same issue. And now it's fixed. Your Unit 2 is also consider as a primary unit that's why you have the issue. Put Unit 2 ON and press letter A until blue/red light then shutdownthe unit. Do same thing for each letter. Next start your primary unit and the unit 2 and do again the pairing from your master.
Thank you for your video, I has having a hell of a time trying to connect 3 of them so they can all talk to each other
Thanks for taking the time to share, but if you had 4 cell phones, and you don't press the "hang up button"... it does the same thing. AKA. when I use these, C will talk to Rider D, but when they are done talking press the "PHONE" button to end the call. THEN rider C can talk to rider E, then when they are done one of them has to hang up. If you would have had the microphones hooked up in this tutorial I think you would have realized they were still on vs looking at lights flashing. So if you are reading this, hook the gear up to them so you hear the "BEEPS" or else you may as well grab a snickers we're gonna be here a while.
If you hold the button fir 2 seconds. Will that work.
the headset you made did you wire the plug what was the wiring order on the 4 pole plug.
Thank you for sharing about EJEAS products!
I want vedio how to connect 3 v6pro
@@bba_bba1994 th-cam.com/video/hz671rFzMLg/w-d-xo.html
The volume when I use it with bluetooth is fine but when another rider wants to talk to me on a noise street I can't hear them. Any advice? thanks!
It sounds like from the manual you should be syncing the "child" units using the "A" button. Not sure if that will make a difference or not.
Good job bro
All this pairs is v6?
comment sychronisez deux v4 à un v6
its very complicated
I had same issue. And now it's fixed.
Your Unit 2 is also consider as a primary unit that's why you have the issue.
Put Unit 2 ON and press letter A until blue/red light then shutdownthe unit. Do same thing for each letter.
Next start your primary unit and the unit 2 and do again the pairing from your master.
All i want to know is, can all the four units talk to each other at the SAME TIME?
@@marvintahusoproductionsmat3495 with V6 nope, just one at the time
I bought on Ali... very good intercom, my max distance was 1.8 km = cca 1.1 mile
unit 2 should be the master
Unpair 2 before connecting to 3 then unpair 3 before connecting to 4
We are 3 rider can we communicate with each other at a time
Not with the v6. Turns out with v4 you can.
You 3 can connect with each other at the SAME TIME?
@@sargenthp so maybe i should go to v4?
Marvin Tahuso Productions MATAPRO That is what I understand.
Shite.