Had to pause. That mini tree brought back a memory to 1993. I was in elementary school and they had a book sale at the school. They also sold cookies and small toys and i bought a tree just like that. But it had small wood decorations i hand painted. I gave that tree to my mom in 1993. Now 29 years later she still sets it up. I want to get a Z scale train to put around it. Lol
I actually have one of these that a buddy of mine repainted into the locomotive from Back to the Future Part III and modified to accept a modern Bachmann motor, runs very quietly and VERY smoothly now. And the best part is that since the new motor's much more compact, he was able to add cab detail to it. Hope to see this appear more on your channel, Sierra Railway #3 is a national treasure and a Hollywood legend, and I feel every American/Canadian layout needs a model of her to truly feel complete!
Great looking steamer. Good job getting it running again on your layout. Since your layout is mostly modern era, you can use this steamer as a vintage excursion tourist railroad during the summer and maybe as a Thanksgiving and Christmas season special run. All you need are some older passenger cars to make your excursion train!
Dude! After watching some of your videos, you inspired me to try to repair an old Tyco / Mantua General 4-4-0 that stopped running awhile ago. I took it apart, cleaned it (it was not very dirty), and lubed it up. Also cleaned out the slots between the commutators on the open 3-pole motor. The engine was never a great runner *before*, it made a lot of noise, and did not like to start up much before the V = 9 and the A = 0.5. Afterward - WOW. It runs better than new, quiet, smooth, linear speed increase as V and A go up, and it now it never draws more than 0.3 amp. Thank you so much!!!! You inspire confidence! - Bruce J. in California.
Heavens......hope you gave that poor thing a "bath" with some warm soap and water.....Nice detailed unit... What I love about those old "Mantua's" was that most of them were diecast...and make good "pullers"...... Interestingly....unless the motor is burnt....with a bit of serious cleaning,( and I mean wheels, gears, commutator, brushes, etc.) re-oiling, and re-greasing....odds are you can get it to run again. If you want success with ANY engine.....have the largest/ widest curves you can place in your layout.....the less tight....the more success and trouble-free derailing issues.....
The Problem I had with that type of Locomotive was that the back weels doesn’t have sufficient paralel movement, so derailment always occurs on 18” curves.
Why don’t you get a running test track where the loco can be tested without moving. All wheels a motor actions can be observed even in a particularly dismembered condition
You may want to check the wheel set and bearing under cab they are some times worn out because it is set back on frame, that will cause derail in reverse, hope this helps.
I paid US$ 19.95 new about 1970 for mine sitting in a box in my basement, so you saved a lot of money by choosing to be born 30 years later. I used to do foreign banknote trading so the value of money based on different factors still interests me and I checked the inflated value of that 1970 $19.95 today and it would be $134.50. Crazy.
That model is of an actual Rogers Locomotive Co. 4-6-0. I saw the real one in the train museum in Jamestown California. It's an impressive locomotive to see in person.
Few of the ones i have trouble with are only with finding parts. Like my lionel ho UP f body unit and gt 5511. Those plastic bottom part that hold wheels in the trucks. People try to pull the off and break them. When you need a flathead screw driver to remove them.
Very nice CP Loco and tender, Harrison, as well as the festive Christmas Tree. You should make a Christmas consist for the next live stream with that steamer. Reaching 4.5K subscribers and only a week into December - - awesome. Surprised you're not getting more subscriber mail at your PO Box. In the immortal words of SMT Mainline, "Well Folks," let's stuff the PO Box with Christmas greetings. 🎄🎄🎄
I would also recommend cleaning the armature of the motor and lubricating the bushings on both ends of the motor as well. I've got a Mantua 0-4-0 I picked up for nothing and with cleaning the motor, it's my second best running steam engine I own! Even better than my Rivarossi/AHM Berkshire! Clean that motor and it should creep like a champion!
I love Mantua steam engines. I need to get myself another two at the least but my problem is I model the Nickel Plate Road and I don't believe they made anything like what the nkp used past having to modify a pacific to resemble an L1 Hudson.
Hey, there, SMT. Kind of a weird question to ask, but I figured this might be the right place to do so. I bought an old Athearn N&W Y6B a year or so ago, and tried to restore it, but I've kind of realized I don't really know what I'm doing exactly, so I kind of stopped at one point, before I end up doing any kind of serious damage. Would it be possible to maybe ship it to you at some point for a possible restoration attempt? You seem to know a *lot* about model train restoration, and to be honest, not many shops anymore handle restoration like that, so I think, if anything, someone like you would be my best bet!
SMT - Do you typically oil the armature bearings on that style of motor? In Classic Trains magazine, they have a photo with a couple of tall switch stands, like the one on your curved switch track. They call it a " High Banner " switch stand.
I oiled the bearings off camera, it's not the most important spot but it certainly improves performance. I will have to see what the High Banner switch stand is all about.
Awesome restoration vid and mail vid. Btw let me ask you a curious question are you getting more trains for Christmas or something? For Christmas you might ask I’m getting a Union Pacific centennial with dcc and sound. If you ask the engine is a emd dda40x.
You need a locomotive cradle. You brutally handled that locomotive. You also should get a magnetic screw holder for your screws when you take it apart.
So Can I send you a train that I bought was in Great condition and it comes wheel attached but not how it should be rattling in my engine and it don’t work nor does it move?
These weren't perfectly designed. They had plastic rings between the bearings in the motor and since the locomotive is almost always going forward there is more stress on one, causing it to wear out faster.
Let me Be Honest, Minn,Wis,it dosent matter who out of any states model Railroads Everybody Model Railroads different no matter what. I model Railroad in wis and proud of it I have Friends who Model Railroad in minn and people who Railroad in min love Model Railroaders In wis we all love the hottest hobby in the world.we all have mutal Respect in model Railroading no matter where we all live at. Different strokes Different Folks.
Had to pause. That mini tree brought back a memory to 1993. I was in elementary school and they had a book sale at the school. They also sold cookies and small toys and i bought a tree just like that. But it had small wood decorations i hand painted. I gave that tree to my mom in 1993. Now 29 years later she still sets it up. I want to get a Z scale train to put around it. Lol
I actually have one of these that a buddy of mine repainted into the locomotive from Back to the Future Part III and modified to accept a modern Bachmann motor, runs very quietly and VERY smoothly now. And the best part is that since the new motor's much more compact, he was able to add cab detail to it. Hope to see this appear more on your channel, Sierra Railway #3 is a national treasure and a Hollywood legend, and I feel every American/Canadian layout needs a model of her to truly feel complete!
Very good, glad you got it back to running condition, always good to see a late 1960's steamer still running.
That engine is based off of Sierra Railroad number 3 which is a Rogers 4-6-0 ten wheeler built in 1891.
I have one in the Baltimore and Ohio paint scheme.
Seeing that tree without any train under it causes me pain
I’m getting Vietnam flashbacks not seeing the polar express under it
It can't be seen on video but that table I put it on has a track inside
Great looking steamer. Good job getting it running again on your layout. Since your layout is mostly modern era, you can use this steamer as a vintage excursion tourist railroad during the summer and maybe as a Thanksgiving and Christmas season special run. All you need are some older passenger cars to make your excursion train!
Dude! After watching some of your videos, you inspired me to try to repair an old Tyco / Mantua General 4-4-0 that stopped running awhile ago. I took it apart, cleaned it (it was not very dirty), and lubed it up. Also cleaned out the slots between the commutators on the open 3-pole motor.
The engine was never a great runner *before*, it made a lot of noise, and did not like to start up much before the V = 9 and the A = 0.5. Afterward - WOW. It runs better than new, quiet, smooth, linear speed increase as V and A go up, and it now it never draws more than 0.3 amp.
Thank you so much!!!! You inspire confidence! - Bruce J. in California.
Heavens......hope you gave that poor thing a "bath" with some warm soap and water.....Nice detailed unit... What I love about those old "Mantua's" was that most of them were diecast...and make good "pullers"......
Interestingly....unless the motor is burnt....with a bit of serious cleaning,( and I mean wheels, gears, commutator, brushes, etc.) re-oiling, and re-greasing....odds are you can get it to run again. If you want success with ANY engine.....have the largest/ widest curves you can place in your layout.....the less tight....the more success and trouble-free derailing issues.....
That was the same exact problem with my tyco mantua 0-4-0 shifter you helped me fix
Hey! I got a mention on the SMT channel! Thanks. Nice restore on the Tyco. Looks like a good running train.
Awesome! A steam locomotive restoration! Great job with this one!
Also, love your little tree. 😂
Another engine brought back to life. Outstanding!
Looks like the Engine from Back to the Future 3
It is it's just painted up to look like in Canadian Pacific locomotive
It is the same locomotive.
This is one of my favorite HO steam locomotives. Tyco got a little lazy on the tenders with wood loads and fill to model the water cap.
The Problem I had with that type of Locomotive was that the back weels doesn’t have sufficient paralel movement, so derailment always occurs on 18” curves.
What a beautiful locomotive!
Mine has the same issue with curves, only thing I could say is slow down whilst turning.
Why don’t you get a running test track where the loco can be tested without moving. All wheels a motor actions can be observed even in a particularly dismembered condition
I like your restorations
I see your budget has increased for set design. That’s great. Festive. I’m hoping to see some elf ears next video. Santa hat?
You may want to check the wheel set and bearing under cab they are some times worn out because it is set back on frame, that will cause derail in reverse, hope this helps.
Turn it into a Christmas train! (Like your Centennial Canadiana)
Man that's a great looking old engine a lot of character in it's design
I have 3 of those. 1 converted to DCC. Cute little locos.
Great video SMT. One thing for other people rule of thumb do not yous too much oil because I learned it the hard way there will be a lot of week slip.
Just a thin slick, nothing more is what I usually tell people
Yes just a thin slick
man. I should open a PO box! love your videos, keep up the good work man!
I paid US$ 19.95 new about 1970 for mine sitting in a box in my basement, so you saved a lot of money by choosing to be born 30 years later. I used to do foreign banknote trading so the value of money based on different factors still interests me and I checked the inflated value of that 1970 $19.95 today and it would be $134.50. Crazy.
That model is of an actual Rogers Locomotive Co. 4-6-0. I saw the real one in the train museum in Jamestown California. It's an impressive locomotive to see in person.
Few of the ones i have trouble with are only with finding parts. Like my lionel ho UP f body unit and gt 5511. Those plastic bottom part that hold wheels in the trucks. People try to pull the off and break them. When you need a flathead screw driver to remove them.
I have a loco similar to this there's a spring and collar on the screw for the pilot wheels
SMT I picked up a mehano GG-1 for 20 bucks. It works quite well. it has odd couplers, I cant quite id them.
Beautiful
Very nice CP Loco and tender, Harrison, as well as the festive Christmas Tree. You should make a Christmas consist for the next live stream with that steamer. Reaching 4.5K subscribers and only a week into December - - awesome. Surprised you're not getting more subscriber mail at your PO Box. In the immortal words of SMT Mainline, "Well Folks," let's stuff the PO Box with Christmas greetings.
🎄🎄🎄
I would also recommend cleaning the armature of the motor and lubricating the bushings on both ends of the motor as well. I've got a Mantua 0-4-0 I picked up for nothing and with cleaning the motor, it's my second best running steam engine I own! Even better than my Rivarossi/AHM Berkshire!
Clean that motor and it should creep like a champion!
I love Mantua steam engines. I need to get myself another two at the least but my problem is I model the Nickel Plate Road and I don't believe they made anything like what the nkp used past having to modify a pacific to resemble an L1 Hudson.
Another thing to consider is cleaning the commentator on the motor. Carbon from the brushes can build up on it and cause the motor to stall out.
Derailing is not a hobby, it’s a compassion
You Do Amazing Man, I Cant Even Do This, If I Could Fix Anything, It Would Have To Be A Real Steam Locomotive That I Built
That would be great to turn into the BTTF engine!
10 wheeler.nice
WHAT? 5 BUCKS? NO WAY! Where can I find such cheap trains, SMT?
Try looking for a 482 mountain type steam engine from the Frisco railway.
Hey, there, SMT. Kind of a weird question to ask, but I figured this might be the right place to do so.
I bought an old Athearn N&W Y6B a year or so ago, and tried to restore it, but I've kind of realized I don't really know what I'm doing exactly, so I kind of stopped at one point, before I end up doing any kind of serious damage. Would it be possible to maybe ship it to you at some point for a possible restoration attempt? You seem to know a *lot* about model train restoration, and to be honest, not many shops anymore handle restoration like that, so I think, if anything, someone like you would be my best bet!
Contacts need work. Also fixed wheel base too long for your curves
SMT - Do you typically oil the armature bearings on that style of motor? In Classic Trains magazine, they have a photo with a couple of tall switch stands, like the one on your curved switch track. They call it a " High Banner " switch stand.
I oiled the bearings off camera, it's not the most important spot but it certainly improves performance. I will have to see what the High Banner switch stand is all about.
How are you going to restore the chipped paint in some areas?
I would also make the wheels black. the red sticks out a bit much.
Do you have vids of running oguage locos thanks. Beautiful loco
Mine has a similar problem, but the tender trucks can sometimes be very hot. Any way of fixing that? Otherwise this was a big help for me.
I recently got one for Christmas and it keeps derailing and doesn’t run that smooth. Got any advice?
I'm rebuilding one of these. I got the hardest part done, but I'm having trouble connecting the headlight wire to the motor. Any tips or suggestions?
Awesome restoration vid and mail vid. Btw let me ask you a curious question are you getting more trains for Christmas or something? For Christmas you might ask I’m getting a Union Pacific centennial with dcc and sound. If you ask the engine is a emd dda40x.
I think I'm gonna ask for a Scale Trains Dash-9
Cool I think it’ll be your first scale trains engine isn’t it once you get it?
How many 4-6-0 do you have? or do you prefer the 060 instead.
Seem like you always forget to take the tender off first lol
You need a locomotive cradle. You brutally handled that locomotive. You also should get a magnetic screw holder for your screws when you take it apart.
I have one
This loco can be digitalized?
Where can i buy one of those?
I see you got a Christmas tree for nerf cat
Yep, your boi Nerf-Cat got an X-Mas tree.
Hang Nerf darts on the tree
2 US dollars are worth 2.68 Canadian dollars apparently
What Railroad line had the 4-6-0?
So Can I send you a train that I bought was in Great condition and it comes wheel attached but not how it should be rattling in my engine and it don’t work nor does it move?
Nice job. Why does reverse always seem to go smoother than forward sometimes
These weren't perfectly designed. They had plastic rings between the bearings in the motor and since the locomotive is almost always going forward there is more stress on one, causing it to wear out faster.
@@SMTMainline gotcha
Let me Be Honest, Minn,Wis,it dosent matter who out of any states model Railroads Everybody Model Railroads different no matter what. I model Railroad in wis and proud of it I have Friends who Model Railroad in minn and people who Railroad in min love Model Railroaders In wis we all love the hottest hobby in the world.we all have mutal Respect in model Railroading no matter where we all live at. Different strokes Different Folks.
It looks like the sierra railway N.3
It may be the same model of locomotive.
Hey smt do you have a small steam locomotive shunter I could buy please
Hi
can u run this locomotive in ur next live stream please
Sure
@@SMTMainline thank u smt :)
Because my grandpa gave me a bunch of rolling stock and no locomotives
Smt are you going to stream tonight?
Can't, I'm headed to an event.
Imagine getting 100$ in America
That’s like worth a billion dollars in Canada
@@molliemagill1069 thanks for that brilliant explanation I need it lol
Casey jones
Urghh coloured lights
27k
Is nest
I think I derailed on the curve because the pilot truck was on backwards. I had the same problem with my tyco 4-6-0 till I turned that truck around
Wait you go to Wisconsin? And no, Minnesota is not better than Wisconsin
It's neaf cat or nothing
Can you please send me the 4-6-0 train please do it now