Thanks for watching my video. If you found this or any of my other videos helpful, maybe you could consider supporting my channel by using the ‘Thanks’ button below each of my videos. Your support would be really appreciated, thank you ! 👍 Screwsnutsandbolts
With this video you simply saved my car from a dishonest dealer. Totally cost me free(I have just got cleaned my camshaft sensor). Even though mine is a 2014 1.0l Toyota Yaris it's pretty similar to the old one.
When I put the new sensor in it didn’t sit flush like the old one There’s a small gap there is this correct also I didn’t feel the clip click in Any suggestions?
Absolutely amazing step by step guide mate it helped me a lot this did. Do you know how to access the TPS and Crankshaft sensor? Would be much much appreciated. Keep up the good work!
Hello great video😊 would this cause the engine light to go on?, has been on a diagnostic and it gave the code P1340, Googled it and it says camshaft sensor is the the same thing?, incase you can’t tell I’m not good with this stuff!!
Hello, the speedometer of my Yaris vehicle does not work, the odometer does not advance either, could the speed sensor of my Yaris 2005 vehicle be faulty, where is it located on the engine, can you help?
I have no fault codes on my Toyota Yaris 1.0L (2004), new spark plugs, new air filter, cleaned throttle budy, clean MAF sensor, also tested camshaft position sensor and checked ignition coils - but still have vibration on idle and some hesitation after fast/sharply pressing the gas pedal (hesitation from idle to 1500-2000 rpm, like if the engine is choking), but if I give gas smoothly - the engine normally gains speed and power.... also no luck of power from 2000 to 7000 rpm.
Thanks for watching my video. If you found this or any of my other videos helpful, maybe you could consider supporting my channel by using the ‘Thanks’ button below each of my videos. Your support would be really appreciated, thank you ! 👍
Screwsnutsandbolts
With this video you simply saved my car from a dishonest dealer. Totally cost me free(I have just got cleaned my camshaft sensor). Even though mine is a 2014 1.0l Toyota Yaris it's pretty similar to the old one.
Glad it helped. Thanks for watching !
What error code does this OBD give? about this fault
Excellent Video. You should be a Camera Man rather a Mechanic.... Thanks for guiding with clear video. May God keep you sound and healthy.
Thanks very much 👍
@@screwsnutsandbolts What is adjacent to the Camshoft Sensor??
Would be better if u suggest some of the symptoms of this parts when gone wrong
shaking on idling, hasitation, +1L fuel consumption
Hi great video
What's the wire above the camshaft sensor ?
Thanks
It's an ignition noise suppressor. It filters out electrical interference that can come through the radio system.
HI! can somedy told me how to change the crankshaft position sensor of A Yaris 1? where is that device exactly? Thanks for your answer
that is located just left of the crank pulley
When I put the new sensor in it didn’t sit flush like the old one
There’s a small gap there is this correct also I didn’t feel the clip click in
Any suggestions?
It should be flush like the one you removed. Are you sure it's the exact same type of sensor ?
@
Thanks bro appreciate it
@@safeehussain You're welcome !
Do you take off the cable of the battery first ?
You don't have to, but if you don't, just make sure the ignition is off while you carry out the job
Absolutely amazing step by step guide mate it helped me a lot this did.
Do you know how to access the TPS and Crankshaft sensor? Would be much much appreciated. Keep up the good work!
Thanks very much, I don't have the Yaris any more, sorry.
@@screwsnutsandbolts thats fine not a problem. Keep doing your thing 👊🏼
@@MohammadAli-wg8up Thanks :)
Hello great video😊 would this cause the engine light to go on?, has been on a diagnostic and it gave the code P1340, Googled it and it says camshaft sensor is the the same thing?, incase you can’t tell I’m not good with this stuff!!
It could be but it could be other things too. Have you already looked at this ?:
www.engine-codes.com/p1340.html
@@screwsnutsandbolts thanks for your reply, no will have a look now ty
Does this exist for the 1.33 vvti?
What was the thing you unplugged just above the sensor what is it called
I don't actually know. I spent the last hour looking at engine diagrams and I can't find out what it is !
ScrewsNutsAndBolts I’ve done some research myself and it’s a Suppression capacitor so you don’t get ignition interference on the radio
@@ryanblake4423 Really ?, I never heard of those. Thanks for the info !
What is the name of the adjacent sensor to Camshaft Sensor?
Also looking for this answer
My cable is a 3 pin connector with 3 wires on it, for a 2006 yaris. Would a 2 pin also work?
No you'll have to replace it with a similar 3-pin sensor
Me too. And i never found it............
Hello can u telll me where is the CRANKSHAFT for a toyota yaris2 year : 2006 please :)???? thank you so much, i cant find it
Hi, thankyou for the video. A question for you, but exist a second sensor? Or it is only one? Thanks
You're welcome. I think it's just the one sensor on this vehicle
Great content man, can you make a video how to change front fog light bulb on toyota yaris?
Thanks, I'll get around to it as soon as I can
this sensor going bad can lead to a crank no start
Hello, the speedometer of my Yaris vehicle does not work, the odometer does not advance either, could the speed sensor of my Yaris 2005 vehicle be faulty, where is it located on the engine, can you help?
Gracias amigo por el video.
You are welcome ! 👍
What error code does this OBD give? about this fault, I see P1340 fault code, ıts true?
Yes that usually the code but it could be caused by other issues: www.engine-codes.com/p1340.html
Hı guys again, There are A and B camshaft sensors, which sensor did you change?
is there just one camshaft sensor?
I think there's only one on this Yaris
Thank you!
@@jamesmoran5885 You're welcome 👍
Would this cause a long crank?
It's one possibility
Is there 2 sensors?
I think there's only one camshaft sensor on this engine
Is this sensor P01346? Thanks
P01346 is usually a fault with the Variable Valve Timing (VVT) Sensor
@@screwsnutsandbolts is it the same sensor or different location?
@@emersonmanabat5193 It's similar to this: th-cam.com/video/GONhPP6OcOE/w-d-xo.html
Is this p0016 error?
Is the yaris 1.3? Or 1.5?
This was a 1.0 liter engine
How can we clean these
Check this link: www.easycarelectrics.com/how-to-clean-camshaft-position-sensor/
I have no fault codes on my Toyota Yaris 1.0L (2004), new spark plugs, new air filter, cleaned throttle budy, clean MAF sensor, also tested camshaft position sensor and checked ignition coils - but still have vibration on idle and some hesitation after fast/sharply pressing the gas pedal (hesitation from idle to 1500-2000 rpm, like if the engine is choking), but if I give gas smoothly - the engine normally gains speed and power.... also no luck of power from 2000 to 7000 rpm.
How high is the mileage on the car ?
@@screwsnutsandbolts 167 000km
Where can I buy it from?
You can pick one up on ebay,com
What waz the simptoms
No symptoms. Just demonstrating how to replace the sensor.
mine is stuck.How to take it out ?
Just try to gently wiggle it and rotate it back and forward as you pull it out. Be careful not to break it if your using plier tools
I face p0016 error what i can do?
This video might help: th-cam.com/video/extiOvtV8_Y/w-d-xo.html
I see p0340 ıs this him true?
Yes P0340 can be a camshaft sensor issue
Cam shaft sensor hilux 2010
Why changing
Just for demonstration
👍
Thanks !
This video not help for Toyota Yaris sedan LE 19
No this is for the 1999 to 2005 model Yaris
Eso es el sensor cmp no de ciguenal
Crankshaft position sensor