Great video, I learned a lot. I want to use bluetooth headphones with my DI as I practice my bass. I'm wondering how I would pair a set of headphones to this? Or.. would you recommend something else? Thank you!
Thank you for your great video, would no if I had XLR out L/R from my DJ mixer into the L/R of the Sirus DI USB/BT, and USB to my PC/laptop could I send audio signal to my PC/laptop to be broadcast/rec and use the Bluetooth to send to my Monitors wirelessly? Cheers
Question, trying to find a way to use a wireless headset with a focusrite scarlett solo 4th gen, said wireless headset uses a USB A bluetooth dongle. In short trying to figure out a way to use a wireless headset and a xlr mic and still get the zero latency (or as close to it) mic monitoring.
Sorry if I’ve misunderstood, but my understanding currently is that this device will add the functionality that currently exists in a device like the Beringer flow 8 is that correct? I.e. with the Flow 8 there is not only a Bluetooth input, but also routing that you can choose to send the audio out of the interface in the main mix did I get that right? So if I understand correctly, this box has two potential inputs one is the USB and the other is the USB , And the switches allow you to control how it is routed to the XLR outputs. . . Did I get that right?
Hey, very nice and informative video! Eine Frage habe ich noch: Angenommen, ich habe ein Gerät, das Musik wiedergibt. Das Gerät hat nur einen aux 6,35 Anschluss. Kann ich ein Aux-USB-Kabel verwenden, um den USB-Dongle meines Headsets mit dem Musikwiedergabegerät zu verbinden, damit ich die Musik hören kann?
Great product and video, I have a question… is their a Bluetooth transmitter that more than one blue device ie earpiece headphone can connect to at one time. Basically I want to broadcast audio to several Bluetooth devices at one time.. thanks
I have wireless headphones that sound great and want to use them for mixing. If I just set my interface to input and headphones to output in the daw, will that work? I usually use wired sets and I'm not sure if that works
Quick question: How would you send the headphone out audio to a bluetooth headset like the Sennheiser 350BT from say your Scarlett or other USB audio interface?
@@PodcastMeister even though it’s direct monitoring? I usually use headphones when playing guitar through the audio interface but really dislike the fact that I have be tethered to my audio interface.
@@quiksilver78 the issue is not with the headphone output, that‘s direct monitoring, practically latency free - but the bluetooth transmitter will inevitably have a delay. You can probably solve it with pro wireless in-ear monitors, but those are rather expensive.
Quick question. I have an ML audio USB Interface , that i run into my DAW ( i use it strictly for recording guitar ) , and my MacBook Pro has bluetooth…. My question is , can i plug my interface in via USB and then just use the bluetooth from my MacBook to connect to my Air Pod Pro’s or other bluetooth headphones ? And would i be able to hear the audio from my interface into my DAW into my air pods ? Or would it just be easier to buy a bluetooth transmitter, plug it into the headphone jack on my ML audio interface, and connect my Air Pod ‘s ( or other bluetooth headphones) that way ? Hope to hear back from you soon , Thanks ! 😊
Hi, if you go with the MacBook way, you'll experience quite a bit of latency. Not ideal for recording. Trouble is, that you will experience latency anyway if you are about to use bluetooth, but it is going to be slightly shorter when going directly from your interface via a bluetooth transmitter. I don't think you'll enjoy it very much though, I think it is rather disturbing to have a delay between touching the strings and hearing the sound.
Thanks for the tip! I'll see if that solves my issue. BTW I really loved the video editing, esp. the "screen captures" with the zoom in and focus. How did you do this? some special effect / plugin? Thanks!
Hi, thanks and good luck with the setup! The camera angle changing zoom effect is made with a plugin from MotionVFX for Final Cut Pro called „mCamrig“ :) It‘s honestly beyond me how it can be free. (!)
Theoretically yes, although the pairing process may be a trial-and-error and don‘t forget, that it does not send any audio back to your headset, so even if you can pair it, you can only speak into it, but won‘t be able to monitor through it.
Hello Sir. I have behringer audio interface and i m using directly to my android mobile to record my live program in Gurudwara. Now my audio interface needs to be connected with usb on mobile to work. I want to make this via bluetooth. Can It make this bluetooth so that my audio interface can be connected to mobile via this bluetooth device . Please let me know It will be more helpful. And you are genius
Thank you kindly. Not sure I fully understand your situation, but you can certainly connect your phone via bluetooth using this device to an audio interface, and through that, you can play sounds coming from your mobile phone through the audio interface into your computer. But be aware that this is a one-way connection, so only mobile phone > audio interface > computer and not the other way around. So you won’t be able to create a mix-minus and use it for voice conferences over your mobile phone this way.
@@PodcastMeister thanks my flow is Mixer--> Audio interface --> This bluetooth device --> (pc/mobile/anything) So this device takes input from Audio interface via usb and transmit to pc/mobile via bluetooth Can this be possible thru device? Thanks a lot again for the quickest reply. God bless you
@@navjotsinghsohal8191 No, that flow would not work. It needs to be before the audio interface, just like your mixer, as it has XLR-outputs only. This will not send out any Bluetooth signal: but Bluetooth and USB are inputs only, not outputs. So once you send the Bluetooth signal into this device, you will need to connect its output to either an audio interface or a mixer.
very informative, one of the few times I do not skip the intro because there was actual content
thank you!
Great video, I learned a lot. I want to use bluetooth headphones with my DI as I practice my bass. I'm wondering how I would pair a set of headphones to this? Or.. would you recommend something else? Thank you!
Thank you for your great video, would no if I had XLR out L/R from my DJ mixer into the L/R of the Sirus DI USB/BT, and USB to my PC/laptop could I send audio signal to my PC/laptop to be broadcast/rec and use the Bluetooth to send to my Monitors wirelessly? Cheers
This is excellent and very helpful. I also love the that it’s not too long.
hey, great video! just one question. can you pair headphones to the sinus and listen to what is playing from your daw?
Hi, no, the audio from there its one direction only: into the interface.
@@PodcastMeister hey thanks for the response!
Question, trying to find a way to use a wireless headset with a focusrite scarlett solo 4th gen, said wireless headset uses a USB A bluetooth dongle. In short trying to figure out a way to use a wireless headset and a xlr mic and still get the zero latency (or as close to it) mic monitoring.
Hi. What would you recommend for Bluetooth audio transmitting from the audio interface? Let´s say for BT headphone monitoring
This is what I'm looking for too
Thanks a lot for this tip! It saves me a lot of money.
Great to hear, glad it helped!
Good video.Any advice how I may connect cordless headphones to my interface with low latency..
Can you do phone calls through the Sirus if your phone is connected the Sirus through Scarlett? I am using PlayoutOne on my radio station
Sorry if I’ve misunderstood, but my understanding currently is that this device will add the functionality that currently exists in a device like the Beringer flow 8 is that correct?
I.e. with the Flow 8 there is not only a Bluetooth input, but also routing that you can choose to send the audio out of the interface in the main mix did I get that right?
So if I understand correctly, this box has two potential inputs one is the USB and the other is the USB , And the switches allow you to control how it is routed to the XLR outputs. . . Did I get that right?
I want to monitorizing my musics in my daw with wireless headphones? Please help ;)
Can I use the Sirius to play music from my phone through my powered speakers via my Scarlett 212? Will it be stereo?
Thanks for the tips
Hey, very nice and informative video!
Eine Frage habe ich noch:
Angenommen, ich habe ein Gerät, das Musik wiedergibt. Das Gerät hat nur einen aux 6,35 Anschluss. Kann ich ein Aux-USB-Kabel verwenden, um den USB-Dongle meines Headsets mit dem Musikwiedergabegerät zu verbinden, damit ich die Musik hören kann?
hard to understand for beginners
Great product and video, I have a question… is their a Bluetooth transmitter that more than one blue device ie earpiece headphone can connect to at one time. Basically I want to broadcast audio to several Bluetooth devices at one time.. thanks
Hi, it is possible, but not cheap. Here’s an article about it: avantree.com/blog/how-to-connect-up-to-100-headphones-at-the-same-time.html
yamaha mg10xu can be loopback with bluetooth? like this?
I have wireless headphones that sound great and want to use them for mixing. If I just set my interface to input and headphones to output in the daw, will that work? I usually use wired sets and I'm not sure if that works
Quick question: How would you send the headphone out audio to a bluetooth headset like the Sennheiser 350BT from say your Scarlett or other USB audio interface?
You can‘t, unless you add a bluetooth transmitter to the headphone output. However, even if you do so, you will have issues with latency.
@@PodcastMeister even though it’s direct monitoring? I usually use headphones when playing guitar through the audio interface but really dislike the fact that I have be tethered to my audio interface.
@@quiksilver78 the issue is not with the headphone output, that‘s direct monitoring, practically latency free - but the bluetooth transmitter will inevitably have a delay. You can probably solve it with pro wireless in-ear monitors, but those are rather expensive.
Quick question. I have an ML audio USB Interface , that i run into my DAW ( i use it strictly for recording guitar ) , and my MacBook Pro has bluetooth…. My question is , can i plug my interface in via USB and then just use the bluetooth from my MacBook to connect to my Air Pod Pro’s or other bluetooth headphones ? And would i be able to hear the audio from my interface into my DAW into my air pods ? Or would it just be easier to buy a bluetooth transmitter, plug it into the headphone jack on my ML audio interface, and connect my Air Pod ‘s ( or other bluetooth headphones) that way ?
Hope to hear back from you soon , Thanks ! 😊
Hi, if you go with the MacBook way, you'll experience quite a bit of latency. Not ideal for recording. Trouble is, that you will experience latency anyway if you are about to use bluetooth, but it is going to be slightly shorter when going directly from your interface via a bluetooth transmitter. I don't think you'll enjoy it very much though, I think it is rather disturbing to have a delay between touching the strings and hearing the sound.
I've been banging the Bluetooth-on-audio-interfaces drum for years. Manufacturers are slow sltarting to clue in. Thank goodness.
Thanks for the tip! I'll see if that solves my issue. BTW I really loved the video editing, esp. the "screen captures" with the zoom in and focus. How did you do this? some special effect / plugin? Thanks!
Hi, thanks and good luck with the setup! The camera angle changing zoom effect is made with a plugin from MotionVFX for Final Cut Pro called „mCamrig“ :) It‘s honestly beyond me how it can be free. (!)
What software u see to edit your video
@@tedz2000 Final Cut Pro
@@tedz2000 Final Cut Pro :)
Can i transmit a wireless headset to that bluetooth device?
Theoretically yes, although the pairing process may be a trial-and-error and don‘t forget, that it does not send any audio back to your headset, so even if you can pair it, you can only speak into it, but won‘t be able to monitor through it.
@@PodcastMeister thanks. In just lookin for options to use a wireless earset to speak but go thru an interface. Appreciate the help 🙏🏼
Hello Sir. I have behringer audio interface and i m using directly to my android mobile to record my live program in Gurudwara.
Now my audio interface needs to be connected with usb on mobile to work. I want to make this via bluetooth. Can It make this bluetooth so that my audio interface can be connected to mobile via this bluetooth device .
Please let me know It will be more helpful. And you are genius
Thank you kindly. Not sure I fully understand your situation, but you can certainly connect your phone via bluetooth using this device to an audio interface, and through that, you can play sounds coming from your mobile phone through the audio interface into your computer. But be aware that this is a one-way connection, so only mobile phone > audio interface > computer and not the other way around. So you won’t be able to create a mix-minus and use it for voice conferences over your mobile phone this way.
@@PodcastMeister thanks my flow is Mixer--> Audio interface --> This bluetooth device --> (pc/mobile/anything)
So this device takes input from Audio interface via usb and transmit to pc/mobile via bluetooth
Can this be possible thru device?
Thanks a lot again for the quickest reply. God bless you
@@navjotsinghsohal8191 No, that flow would not work. It needs to be before the audio interface, just like your mixer, as it has XLR-outputs only. This will not send out any Bluetooth signal: but Bluetooth and USB are inputs only, not outputs. So once you send the Bluetooth signal into this device, you will need to connect its output to either an audio interface or a mixer.
@@PodcastMeister thanks got the point. Thanks for the wonderful help