The sound of that clutch on the minibike brought back memories of my go-cart. So many miles I put on that thing, so many drive tire (yes, tire) replaced, and that clutch ringing was just icing on the sheered-off-bolt-welded-back-on cake.
I have one just like it. You would be very surprised at how torque-y these 2 speed mini bikes are. Mine is all original and pulls me and my dad both on at the same time up a steep grade with no problem at all. Then hit the highway and the second clutch kicks in and it's smooth sailing from there. Whoever came up with this dual clutch jack shaft design is a genius.
To be a kid in the 70s... I was riding mini bikes with 3 and half. Or 5 hp . briggs and Stratton whrn i was 8, 9 , 10, till i got my 1st dirt bike wich was a 72 cl Honda scrambler.... You guys are having fun ! But I lived it when I was a kid.... Im 53 now.... I still love motorcycle and atvs
Man that 2 speed bike is sweet hope you guys do a resto build with that. That frame you ended up with looks like it could make a sweet mini drag bike. Can't wait to see more! This build off is a good idea
simple: two ratios, two clutches set at different rpm. once the engine picks up in rpm, the second clutch kicks in. allows you to run a very short ratio AND still have some speed. i've seen this on antique bikes where belts take the role of the clutch.
Côme Thiburs neither your picture or description make it clear, you may assume your explanation is simple, but not everyone processes information the same. I happen to be someone who processes best through visual demonstrations. For example; I had trouble understanding how a limited slip rear end worked based on reading about it. After watching a video of one in action I fully understand.
It might be the right time with the right vintage mini bike to do a full-on restoration project. That bike appears to be a complete survivor so, all you have to do is rebuild it and make it look like new.
Y'all inspire me so much. When I see a go-cart minibike or a predator 212, I think about y'all. I'm personally working on an engine and I think, what would John and Ike do 😂
Man I am so jealous. Didn't know you'd all be down there. Wish I lived in the states! That is epic. Looking forward to the next vid bros. You're legends.
The Bible says. Were not supposed to envy. But. Holy Moly Gentlemen. You guys are having so much fun. Good for you guys. I had a lot of fun watching y'all.
I could have watched another hour of this video. I think Chris Craft is the most underrated of all you guys. But I watch every one of your channels very awesome.
man this is awesome ya'll need to go picking and go to swap meets and i love seeing all my favorite youtuber's together you should do more collabs man so cool!
Back in the 60s their was a Tote Goat type thing called a Sherpa that had a high low range. But it wasn't shift on the fly. It was like road range and offroad range. Had really big tires and was more motorcycle size.
Duddeee you guys being paired with rather b welding is so legit, Nothing personal I'm just not a huge red beard fan. But rather b welding had me excited
I was about to drive 10 hours to come see you guys! And not to mention that swap meet looked awesome! Love the vids! Hope ya'll got that 2 speed back home!
YOU BET!! just give me the date and I'll be there! Haha! Hey! Got me a Murray explorer kart I'm modding and putting an ex500 on it! Maybe I'll bring it to the next meet! Lol
Hey guys, my son 13, bet me you good gentlemen did not know what a RUPP is. I told him “o yes they do” he says this because you have never shown or talked about a rupp minibike. So fellas, please, beg borrow or steel one so he understands what true minibike heads you really are. Thank you from a brother head. Robert is my sons name. He is a good kid so please tease him all you want.
You guys should really check out some of the dragster mini bikes at Detroit Hood TV on TH-cam I'm a big carsandcameras fan and can't wait to see the rest of this build
Heathkit Boonie bike had a two steep manual with a lever shifter in the middle of the frame. You needed a free hand to shift which was kind of hairy considering how hard it was to ride with such a wide back tire,
I have a feeling that all the footage you've shot is going to make for some bloody good content! I can't wait *:)* P.S What is going to happen with the new minibike? Are you going to leave it as-is, or do some sort of light restoration?
Do you guys plan on getting the vintage two speed minibike back home? I'd love to see yo guys spruce it up and see just what it can do, who knows maybe you could try a similar set up on a budget build bike but with newer bits? ether way with how quirky and weird and cool it is I think it'd be a perfect addition to your fleet.
My husband had the same clutch on his motor for 30 years and it lost all its bearings Springs in the first year he had it and it still works just fine with a little grease, then you're off and going. It's a Max Matic clutch setup to a 2-speed gearbox manufactured in Issaquah Washington by a Co. called Truly Trooper. Early 60s and 70s. It also had a step through frame and cargo box over rear wheel along with a front pack plate that acted like a fender. He still has owner's manual. I can't find anything on Google about it...👀👀❓
You guys are gonna need to buy a warehouse for all these mini bike and go carts you have I can wait to see your museum 1 day its gonna be awsome...you guys need to find and buy and old Honda oddesy and rebuild it better then read beards garage and then race them...
hey guys, did yall get that 2 speed shipped back home from tx?.so rbg bought a already complete build?..that's so dissapointing ..i thought it was a build off not a buy off...anyways i hope yall are staying cool..it's almost 90 here in bama and supposed to get to 95 this weekend...love and stars from Bama
The sound of that clutch on the minibike brought back memories of my go-cart. So many miles I put on that thing, so many drive tire (yes, tire) replaced, and that clutch ringing was just icing on the sheered-off-bolt-welded-back-on cake.
I want see more of that 2 speed set up. Lol haven't seen that set up in 30yrs. Keep up the shows!
i picked up yesterday a 1969 rupp with a two speed...
I have one just like it. You would be very surprised at how torque-y these 2 speed mini bikes are. Mine is all original and pulls me and my dad both on at the same time up a steep grade with no problem at all. Then hit the highway and the second clutch kicks in and it's smooth sailing from there. Whoever came up with this dual clutch jack shaft design is a genius.
I can't wait to see this thing once it's done. That 2 speed was a great find.
I love the way you buy the parts to build the mini carts and go bikes then go out and drive them around in circles while everyone is watching you!
To be a kid in the 70s... I was riding mini bikes with 3 and half. Or 5 hp . briggs and Stratton whrn i was 8, 9 , 10, till i got my 1st dirt bike wich was a 72 cl Honda scrambler.... You guys are having fun ! But I lived it when I was a kid.... Im 53 now.... I still love motorcycle and atvs
Man that 2 speed bike is sweet hope you guys do a resto build with that. That frame you ended up with looks like it could make a sweet mini drag bike. Can't wait to see more! This build off is a good idea
Please bring that 2 speed back with you . Would love too see more of that
Dam i have to wait till monday. That sucks
Part 2 of this: th-cam.com/video/-P1gH3WmzgA/w-d-xo.html
Never seen Chris in such good quality, amazing!
Please do a detailed explanation of how the two speed works on the mini-bike
simple: two ratios, two clutches set at different rpm. once the engine picks up in rpm, the second clutch kicks in. allows you to run a very short ratio AND still have some speed. i've seen this on antique bikes where belts take the role of the clutch.
i.redditmedia.com/KKUVWvfheMDcvjwy4Hyh0H7Kie92OHAyiSprYvypNzM.jpg?w=1024&s=b87184aea09b784c428e62541f0b3579 here's a pretty clear picture.
Côme Thiburs neither your picture or description make it clear, you may assume your explanation is simple, but not everyone processes information the same. I happen to be someone who processes best through visual demonstrations. For example; I had trouble understanding how a limited slip rear end worked based on reading about it. After watching a video of one in action I fully understand.
bob francis, I asked because I like the style of their videos and when they do a good job of explaining stuff in an entertaining way.
Yes, they are the best at explaining their builds
It might be the right time with the right vintage mini bike to do a full-on restoration project. That bike appears to be a complete survivor so, all you have to do is rebuild it and make it look like new.
Y'all inspire me so much. When I see a go-cart minibike or a predator 212, I think about y'all. I'm personally working on an engine and I think, what would John and Ike do 😂
Man I am so jealous. Didn't know you'd all be down there. Wish I lived in the states! That is epic. Looking forward to the next vid bros. You're legends.
Texas Pate Swap is sweet... I remember go too it 35 years at when the museum was still open outside of Benbrook.
Just watch some of your videos... I'm hooked, love the team work, love all the builds the two of you have been doing over the years... good stuff men
MinNitro thanks
The Bible says. Were not supposed to envy. But. Holy Moly Gentlemen. You guys are having so much fun. Good for you guys. I had a lot of fun watching y'all.
I love these combo shows with other teams... esp Red beard wish I had friends cool like you guys. Keep building and well keep watching !
That sliding door transition at around 48 was on point guys, Loving the cinematography!
Show more of that 2spd set up please!
It's super cool that you guys are teaming up with rather B welding! He has some super cool projects
You guys build a mini bike with a dual engine that's insane but I like it can't wait for Monday's reveal of how you guys built it the rest away😅😈
I could have watched another hour of this video. I think Chris Craft is the most underrated of all you guys. But I watch every one of your channels very awesome.
man this is awesome ya'll need to go picking and go to swap meets and i love seeing all my favorite youtuber's together you should do more collabs man so cool!
respect for not molesting that vintage 2-speed minibike
That looks like a Heathkit Boonie bike y'all picked up. What a gem!
Have you guys seen anything like this before??
Up here in Northern Ontario we don't even get swap meets :( I can't find a Trail 70 or any other mini bike eligible for the road for that matter :(
Ya 2 speeds were junk thats why not alot were made lmao
CarsandCameras I had one but it was in bad shape
CarsandCameras nope
Heathkit boonie bike
I have never seen a mini bike like this before 🙀
Have you seen the movie dumb and dumber?
TaNkSaLoT100 thanks a lot dumb ass
Seeing that Colt mini bike has made me want to get into this.
Back in the 60s their was a Tote Goat type thing called a Sherpa that had a high low range. But it wasn't shift on the fly. It was like road range and offroad range. Had really big tires and was more motorcycle size.
Really cool video! You guys have so much fun :)
Duddeee you guys being paired with rather b welding is so legit,
Nothing personal I'm just not a huge red beard fan.
But rather b welding had me excited
I guarantee y'all will like the upcoming episodes! I promise you that awesomeness is on the way! My lips are sealed. 73s from TEXAS!
I watch rather b welding,build break repeat and this channel all the time
Cool to see all u guys together.
some cool stuff there .like the roadster gokart ect
Keep up with mini bikes videos I love them
miniature motorcycles are one of the most fun things in the world
I hope we get to see more of the mini bike
thats very rare, i hope you guys get it back home and restore it.
no but really cool that there are some things like this back then....
keep up the best work yet
Love the ring of that clutch
I was about to drive 10 hours to come see you guys! And not to mention that swap meet looked awesome! Love the vids! Hope ya'll got that 2 speed back home!
So we'll see you next year, right??
YOU BET!! just give me the date and I'll be there! Haha! Hey! Got me a Murray explorer kart I'm modding and putting an ex500 on it! Maybe I'll bring it to the next meet! Lol
Cool video guys.
Mini bike with a powerglide. Awesome.
I think all of you guys should do one big build together
Super awesome video guys can't wait to see the full build it's going to be badass love the video
Best editing on TH-cam.
Haha hory shet! That’s the exact bike from the movie dumb and dumber! xD
Sweet! Its a Atlas Mb4000 2 speed Minibike from Right here in St Louis MO.
I want to get out of Ca. This looks like a slice of Heaven. How often is this swap meet held. I want to be there.
glad you guys didn't chop up that colt mini bike. never heard of a two speed mini bike before.
Different video from you guys, like it alot! good find there. Keep the good feels cooming :)
Ooo I'd like to go there and get a mini bike frame.
Wish 2 speed jackshafts were still made.
They are still made: www.ebay.com/i/162971301491?chn=ps
Rather B Welding could make you one.
That Greg... you have to watch those guys from Tennessee. 🙃🙃🙃
Please tell me you're going to bring the 2 speed mini bike back with you. That would be awesome with some mods on that Tecumseh
0:45 - Drivin' in the 'Bu.
wheel barrow side car... would be cool
i have just found your site and SUBSCRIBED to it and i have watch all your video's and i LOVE IT keep up the GOOD WORK and VIDEO'S /UK.
Im going next year! Its a must!!!
GreatCall on not cutting that thing up
Hey guys, my son 13, bet me you good gentlemen did not know what a RUPP is. I told him “o yes they do” he says this because you have never shown or talked about a rupp minibike. So fellas, please, beg borrow or steel one so he understands what true minibike heads you really are. Thank you from a brother head. Robert is my sons name. He is a good kid so please tease him all you want.
Please put up more video on this crazy 2 speed.
*infinaty wars is the biggist cross over in history*
go power sports : back up marvel
saiaddict that would make me Stan Lee
Cars and cameras + mighty car mods + roadkill, Need to colab.
Ike is forever eating!
That thing at like 3:27 was a sprint car, vintage one!
You guys should really check out some of the dragster mini bikes at Detroit Hood TV on TH-cam I'm a big carsandcameras fan and can't wait to see the rest of this build
That 58 cadi is dope down in Tucson AZ they have one for sale for 3000
rupproadster187 Wow, cheap! Four door or two?
TammySue PattyPan 4 sitting outside ace hardwares hobby shop in Tucson AZ off 22nd and kolb
Nice!!!
Hey!! Go Power Sports was established the same year I was! :-)
Cool deal
Am I blind or is there a reason I can't find part 2?? Keep the content coming guys love it here in Scotland lol
BOOST CABOOSE!!! Hahaha! I love it!!
Need to make a kart u stand up to ride with no seat. Lol
Heathkit Boonie bike had a two steep manual with a lever shifter in the middle of the frame. You needed a free hand to shift which was kind of hairy considering how hard it was to ride with such a wide back tire,
Damn chris made ike it some crow on that 2 spd lol
$7K AWESOME !!!!!!
Best engineers colab
Sounds just like the Chevy motor pop pop pop pop pop
Lol. Good luck fitting the 700r4 hahaha
Come to San Antonio we have a awesome place called K1 speed a go kart track that has a nascar
Why don't you guys do a Tote Gote???
Awesome bikes from the 1960's!!!
I have a feeling that all the footage you've shot is going to make for some bloody good content!
I can't wait *:)*
P.S
What is going to happen with the new minibike? Are you going to leave it as-is, or do some sort of light restoration?
, you know you're a true fan when you hit the like button before you even start watching these guys are awesome
Rej Johnson 👍🏻👍🏻👍🏻
1:55 eeeeyyy it's ma boii
Where do you find all the frames like the junk ones and stuff?
Craigslist, through friends, facebook marketplace and other buy/sell apps!
Do you guys plan on getting the vintage two speed minibike back home? I'd love to see yo guys spruce it up and see just what it can do, who knows maybe you could try a similar set up on a budget build bike but with newer bits? ether way with how quirky and weird and cool it is I think it'd be a perfect addition to your fleet.
Nice chemtrail sky's you guys have there in Texas
nice boys
Man I’m jealous! I loved visiting Texas a few years back! Y’all experience Whataburger while there?
I had it last time!
Bring back the YERF DOG please!!! More power mods
Hey will we see the 2 speed mini bike ever again???
Charlz Ford its at gopowersports. I hope so
My husband had the same clutch on his motor for 30 years and it lost all its bearings Springs in the first year he had it and it still works just fine with a little grease, then you're off and going. It's a Max Matic clutch setup to a 2-speed gearbox manufactured in Issaquah Washington by a Co. called Truly Trooper. Early 60s and 70s. It also had a step through frame and cargo box over rear wheel along with a front pack plate that acted like a fender. He still has owner's manual.
I can't find anything on Google about it...👀👀❓
Go power sports Will help ya
You guys should do a lil Honda 83 pa 50cc
You guys are gonna need to buy a warehouse for all these mini bike and go carts you have I can wait to see your museum 1 day its gonna be awsome...you guys need to find and buy and old Honda oddesy and rebuild it better then read beards garage and then race them...
Please restore that two speed
finally rather b welding!!!!
hey guys, did yall get that 2 speed shipped back home from tx?.so rbg bought a already complete build?..that's so dissapointing ..i thought it was a build off not a buy off...anyways i hope yall are staying cool..it's almost 90 here in bama and supposed to get to 95 this weekend...love and stars from Bama
Jane Ames red beard did some mods to his to add his own touch to it
Gotta buy it to build it.
I got bored with rbg.