Fork Install on 2024 E-Ride Pro SS 19” by Stealth Tahoe
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Anthony from Stealth Tahoe goes over the installation of a Fast Ace fork on a new 2024 E-Ride Pro SS 19”
Please disregard the short time lapses, we will improve on those in future videos.
Feel free to ask questions or give us any suggestions for future videos in the comments. We appreciate it!
We were unable to take their bike for a test ride due to the snow storm currently hitting Truckee Ca. Stay tuned for a ride video in the future.
Thanks!
Siiiiick, nice work guys. Can’t wait to try one of these out
FastAce fork should be the first upgrade.
Awesome video bro! Keep it up, hopefully soon I'll be and to get an e-bike from you guys soon.
Was the new headset required or could you have installed the fork with factory parts? Going to install this fork soon and want to make sure I have everything
Is fast ace fork really better than stock ones?
have you heard of "building " the stock forks on the ss?
No I have not
Mind linking all the upgrades?
The fork was purchased though FastAce FASTACE ALX13RC 1.0 SUR-RON ORIGINAL FACTORY FRONT FORK SUSPENSION FOR SURRON TALARIA STING ERIDE PRO SSwww.fastace.com/
The brakes are Magura MT7
www.jensonusa.com/Magura-MT7-Pro-HC-Flip-Flop-Brake-2?loc=usa&gad_source=1&gclid=CjwKCAiAzc2tBhA6EiwArv-i6SgaQjFCRhpfuvVbP5np2w_og-mG_a2oh6ktg-aKU5ck96ZWgO3Z7hoCTVUQAvD_BwE
I do not have a link for the rear shock.
The tires are Shinko 241 19" x 2.75"
www.revzilla.com/motorcycle/shinko-sr-241-series-golden-boy-tires?gad_source=1&gclid=CjwKCAiAzc2tBhA6EiwArv-i6XMrwfQuU_DIWqCkC7lo2_wXODZ7afCV-tKJi6dux_fZgurYeDtVohoC9h0QAvD_BwE&sku_id=594595
cool work shop!!!!!!!!!!!!! keep it up bro
Thanks! Will do!
Great video! Do you know if I buy the talaria factory fork from Luna cycle, is that plug n play or will I also need to get a bearing and cup for the bottom?
Good question. The reason we had to use a new bearing a cup for the bottom on this install is because we couldn't remove the stock crown race and bearing clean enough without damaging them to reuse. If you're able to get the bottom bearing and crown race off your stock fork without damaging them they should work on your new fork.
Have you had to replace a lot of "jet shocks" on the pro ss?
We have only had 1 Eride Pro in the shop since they've been out in the wild. The fork that come on the bike functioned, just not the best.
That fork is not that much better then stock. What a waste of money. EXT Ferro Fork all day!