Just bought the fastace and doing this job. I mostly knew what to do, but I picked up some info from here that I did not know! Thanks again Luna! Also where can I get that 3 way allen wrench?
Very good install video. My stock fork bearings seems to tighten up over time for some reason. Even when I have not dumped it and twisted the stem, lol. Is there any torque spec on the top bolt? I’m also considering a direct connect stem…
I have Fast Ace forks on my bike now, I just bought the 2.0 from you guys. Can I just slide the fork tubes out and slide the new updated ones in my existing upper and lower crown ?
@@donsurron76 not sure but ebikezilla has it for like 15. If you took it up to any auto parts store they could probably grab you a match for a few dollars. I would replace it while I had it all apart.
Please do a video on how to put new seals in these specific forks. Cheers
Just bought the fastace and doing this job. I mostly knew what to do, but I picked up some info from here that I did not know! Thanks again Luna! Also where can I get that 3 way allen wrench?
great tutorial, not many of us own those fancy tools 👍
Very good install video. My stock fork bearings seems to tighten up over time for some reason. Even when I have not dumped it and twisted the stem, lol. Is there any torque spec on the top bolt? I’m also considering a direct connect stem…
The bearings are probably dry. Take it apart and regrease it before you ruin the bearings. Trust me from experience lol @jimboinvt
I want to install these forks on my surron. Is the bearing on the forks the same as the surrons? Or do I need to change the bearing.
Can you add air pressure on the ace2.0 like the factory forks??
is this same procedure as installing on mx4? i might want to change my factory fork to fastace gold 60lbs
Thank you!!🔥🔥
I have Fast Ace forks on my bike now, I just bought the 2.0 from you guys. Can I just slide the fork tubes out and slide the new updated ones in my existing upper and lower crown ?
How important is that spacer? Just noticed it’s not on my bike any more?
Important the black dust seal is even more crucial then the two spacers
How do you check air pressure on these forks??
would this be the same
for the xxx
Pretty much just did it on mine.
@@solomindedi cant get the forks off, any tips?
@@Luv_3xT DId you unscrew thew top screw? It should slide off with everything unscrewed. Make sure the head clamps are loose too.
Factory 2.0 all the way psi to 100-110 and your set
How did you fill them and from red or blue side?
Or hear me out I order a replacement bearing for 4 dollars before I do this.
What is the size
@@donsurron76 not sure but ebikezilla has it for like 15. If you took it up to any auto parts store they could probably grab you a match for a few dollars. I would replace it while I had it all apart.
Thank u will check it out@@jeffmathews3746
fork is complete crap! During city driving it started leaking after three months!!!
The fork seals just blew its normal for that to happen and it does often. It’s a cheap and easy replacement process.
Can you add air pressure on the ace2.0 like the factory forks??