Man your thumbnail is outstanding! I've just started watching the video but when your thumbnail showed up in my recommended videos I knew I had to watch the video. I'll add a reply after I've seen the video.
That's some amazing scenery. I'm glad you added the note at the end about the Gopro rolling down the hill. I couldn't figure out why the two videos were so different. Thanks for posting the video.
@@VISMAFPV i am interested too, did you apply directly or you did a standard laminate first? did you do it with iron or heatgun? i have ordered some vinyl and i will try on mine.
you are too kind, the next episode of the plane long range series I will do it again with the dolphin, but at 6s and in a much nicer location, this video was a kind of inaugural test. this plane is really amazing, tonight i took off with a 4200mah 6s liion, i flew 24km for 17 min and tackling 1200m vertical drop twice, all in the same flight and on landing i still had 3.75v per cell😍
obviously without gopro, I am still in the test phase and before tackling peaks of 3000 + meters and moving away from the home 😃🔥of 10km I prefer to test it well
Wow I e got the bug want to fly long range got 7 inch rig elrs GPS rescue carry full size GoPro motors emax Eco II 1300 KV 6s when did hover test today amp at I to 1.5 when took off half throttle amps went to 50 55 amps 120 c 6s 1500 sucked it from 4.15 volts to 3.49 in less then a min and was not flying battery motor where red hot any ideas what's going off with it any help be great as got set up but something off with it 3to6s ESC X 4 one each arm etc plus 35 amp video feed is a mess only when arm any help please settings to try anything you on Facebook messenger can send you DVR footage if that ok cheers wow I want to send it to the moon brother when flew no camera on quad wow hope you can help me set up my drone Cheer's
I'm working out bugs on my 7" long range quad as well. If your motors are getting extremely hot there may be a simple solution for that. Look up the subject on TH-cam. Joshua Bardwell explains the reasons for hot motors and offers solutions as well. Also, a 1500mah battery is too small for a setup like that. My Chimera 7, for example, recommends 3300mah lipo batteries.
@@doncunningham3124 not going todo long range just fly it make sure all good sucks battery dry in less then 1 min if had 3000 mah with this set up get 2 mins if motors don't explode plus battery get red hot too that should not happen hoover or arm on deck hit 43 amps done video on this please watch and see
@@gadgetman404 did you happen to find out why your motors are getting so hot? That can be caused by many different things but there's usually a simple solution for that problem.
@@doncunningham3124 no are you on WhatsApp or Facebook messenger so can chat more I'm getting into it you already fly it need your.help.setting.up pids etc
@@gadgetman404 th-cam.com/video/xYsIs0zmZR4/w-d-xo.html TH-cam is the only social media I use. Here is a link to a video that may help you. There are a few more if this one doesn't work out. If none of these videos help then let me know. Maybe we can email each other.
Awesome. Great flight. Love the summary at the end. 👍
Yaeh~ so super shots-have a good day~buddy~
Cool flight!
Man your thumbnail is outstanding! I've just started watching the video but when your thumbnail showed up in my recommended videos I knew I had to watch the video. I'll add a reply after I've seen the video.
That's some amazing scenery. I'm glad you added the note at the end about the Gopro rolling down the hill. I couldn't figure out why the two videos were so different.
Thanks for posting the video.
What software are you using on your F405 Wing? Any plans/thoughts on using a GPS in case you lose video?
Use inav with return to home, It works very well🔝😃
@@VISMAFPV Thanks for the information. I haven't tried iNav myself yet. I plan to try it soon though.
Thanks again for the excellent video.
I like the faux carbon fiber vinyl wrap. Looks cool and probably strengthens the aircraft without adding a lot of weight.
if it weren't so difficult to apply vinyl, now it would be even more beautiful 🤣🤣🤣🤣🔥
however it was worth it😍
@@VISMAFPV how do you apply it?
@@VISMAFPV i am interested too, did you apply directly or you did a standard laminate first? did you do it with iron or heatgun? i have ordered some vinyl and i will try on mine.
Verny nice long range video!!! Keep going...
Thank you 😃💥
abbomba!! Sta per arrivare anche il mio !!
Awesome
Absolutely stunning flight. What is your cruise speed/amp draw on your current powertrain and what flight times do you get on it?
Great job
nice cool video. nice spot to fly
haha good landing
🤣🤣🤩
Great presentation
1. What is the range distance ?
2. What type of battery and motor ?
its in the description, its a tmotor f90 1700kv, and a 3000mah 4s lipo, the range is very very dependent on your surroundings.
🔝💣
Great flying location, love it!
Is that built in Hero 8 hypersmooth or did you use reelsteady or gyroflow?
thanks
Thank you Charlie, i use reelsteady go for stabilize video 📹
@@VISMAFPV I crashed my dolphin on the maiden launch, I'm in the process of repairing it now. I hope I can make some videos half as good as this one 👌
you are too kind, the next episode of the plane long range series I will do it again with the dolphin, but at 6s and in a much nicer location, this video was a kind of inaugural test. this plane is really amazing, tonight i took off with a 4200mah 6s liion, i flew 24km for 17 min and tackling 1200m vertical drop twice, all in the same flight and on landing i still had 3.75v per cell😍
obviously without gopro, I am still in the test phase and before tackling peaks of 3000 + meters and moving away from the home 😃🔥of 10km I prefer to test it well
@@grim-upnorth what caused the crash
I said " keren banget ini om 😘😘 "
I hope to learn fpv soon 😄
Do these shapes of plane fly further than a Skysurfer or Seal type traditional plane shape?
yes if you set them up rightly. a little bit more efficient shape.
How did you manage to get that carbon Vinyl on looking sleek with no creases?
Which gopro did you use? I have hero 11 but im told that it's too heavy?
Great video, how do you get the distance out of the dji air unit, I have it in a geprc mark 5 and I don't know what I'm doing wrong.
An Air Unit up front, a heavy battery up front and a gopro up front? What did you put in the back to compensate?
An 80amp heavy esc analog hahahaha
Be careful, you hands. I'm damaged fingers, had to get stitches
Gopro eject feature?
Air Wart. 😂
Whats the AUW?
How far can you go?
13km
Wow I e got the bug want to fly long range got 7 inch rig elrs GPS rescue carry full size GoPro motors emax Eco II 1300 KV 6s when did hover test today amp at I to 1.5 when took off half throttle amps went to 50 55 amps 120 c 6s 1500 sucked it from 4.15 volts to 3.49 in less then a min and was not flying battery motor where red hot any ideas what's going off with it any help be great as got set up but something off with it 3to6s ESC X 4 one each arm etc plus 35 amp video feed is a mess only when arm any help please settings to try anything you on Facebook messenger can send you DVR footage if that ok cheers wow I want to send it to the moon brother when flew no camera on quad wow hope you can help me set up my drone Cheer's
I'm working out bugs on my 7" long range quad as well. If your motors are getting extremely hot there may be a simple solution for that. Look up the subject on TH-cam. Joshua Bardwell explains the reasons for hot motors and offers solutions as well. Also, a 1500mah battery is too small for a setup like that. My Chimera 7, for example, recommends 3300mah lipo batteries.
@@doncunningham3124 not going todo long range just fly it make sure all good sucks battery dry in less then 1 min if had 3000 mah with this set up get 2 mins if motors don't explode plus battery get red hot too that should not happen hoover or arm on deck hit 43 amps done video on this please watch and see
@@gadgetman404 did you happen to find out why your motors are getting so hot? That can be caused by many different things but there's usually a simple solution for that problem.
@@doncunningham3124 no are you on WhatsApp or Facebook messenger so can chat more I'm getting into it you already fly it need your.help.setting.up pids etc
@@gadgetman404
th-cam.com/video/xYsIs0zmZR4/w-d-xo.html
TH-cam is the only social media I use. Here is a link to a video that may help you. There are a few more if this one doesn't work out. If none of these videos help then let me know. Maybe we can email each other.