I went to Good Works this morning and bought a BC-4200 and could not be happier ! Great product and very nice working with Good Works Tractor Thanks again Courtney
I bought the brushcrusher 4200 a year and a half ago for my JD 3032e. I thought I would just pick up the larger limbs, but when they came out with the extra teeth, I just bought the lower teeth to keep the weight down. Now I can pick up small limbs also along with bigger leaf piles. I love it.
Thanks for your very informative videos. I would really like to see the bc4300 in action. I am on the fence on purchasing one. There just isn't much out there to research and you are putting out the best info and well done videos I have seen. Good work 👍
The BC-4300 will function in the same manner as the other Brush Crushers. I'm sure I'll make a video with one at some point, but not sure when exactly right now. Thanks for watching!
Hi Courtney! Tim needs you guys to have another "play day" with tractors behind his house..........LOL Thanks for the great demo and vids. Can you just put a grapple seed in the ground, throw some dirt on it, water it and get a grapple?
Both of them seem to work great! I agree that the BC Crusher with the 3rd tooth I think would be a bit more versatile. But both are pretty cool especially not needing hydraulics. I do have one question. Should we be concerned about putting that much weight on the front end/axle, bearings etc on a small tractor?
Those were good shots. Like that Brush Crusher. Based on what I saw in the video, it looks like the middle row is worth having. At least on the bottom. Thanks for sharing!
Great video Courtney - Thanks for sharing how these grapples work - In my opinion, I think the BC-4215 is the best bang for the buck - The center teeth will make it invaluable for small brush etc. At 285 pounds the BC-4215 is only about 100 pounds more than the weight of the 53" bucket on the 1025r which will still give you about 600 pounds of lift capacity... I'm saving up to order one from you - Thanks....
I seen video recently where the brush crusher on JD is putting pressure on the loader pins and damaging mounting bracket area anyone seeing that also. And does SSQA bc 4300 version have a similar issue to be concerned about
The brushcrusher is impressive. I liked when you only had control of the shorter log with one side of the grapple it didn't seem to display excessive flex.
I am impressed, looks like a well engineered product. I believe the center section would be a necessary part to have, it would really ramp up the versatility. How stable was the tractor with the larger log? Looks like the operator should take it slow & easy to avoid any uh ohs. Excellent video, Courtney, of what looks like a real back saving attachment!
Morning! Yes, center section is definitely nice to have...downside is the additional weight for the subcompacts. I was doing my best to be straight up and down any inclines or hills, so tractor felt very stable with the log clamped with either grapple. Thanks as always!
I'm considering buying a Brush Crusher and am researching it. I'm curious, did lifting those logs damage the lynch pins in your skid steer quick attach mounts? I've seen others state that they had to replace those mount brackets because the lynch pins actually pulled through the mount bracket.
I think this might be the year I go after that worksaver. You might be hearing from me in the next couple months. Im getting too old to saw wood on the ground my back talks to me for weeks afterward.
Courtney, can the work saver clear the bed sides of a Ford F 150 using a 1025. I do not own a trailer so I need to take my brush to the local transfer station in my truck. It looks like the brushcrusher won’t because it has to be in a vertical position to dump. Gary
Dumb question... can you use the rear hydraulic lines for the the backhoe connection to somehow operate a hydraulic grapple? The 3rd function kits seems stupidly priced to me
I know this video is about the grapples, but I really like the duel wheels on the tractor, especially for loader or grapple work. I bet they are a big enhancement to the stability of the tractor. Thanks for the comparison video on these grapples. I'm sure that you are the only one with a video like this on the tube.
Awesome video. thankya for sharing!!! I would love to have the Westendorf BC4200 with the middle row of teeth on both top & bottom rungs for my JD1025R. How much for that complete setup???
@@truckerray7533 4215 has top and bottom middle teeth installed. The newer 4200 has predrilled holes to upgrade if one choses. I have a 4200 vintage 2018 without predrilled holes. Great tool to have available.
Good works tractors Wondering if you could give me an estimate on what it would cost to replace the elective grapple motor. I'm trying to decide which one I want. I'm planning on buying a tractor next spring and like the brush crusher since there's no extras to go wrong but I'm also considering the self leveling bucket and I've heard you can not use the brush crusher on that one. Thanks and look forward to your response.
Good question, but I'm not sure the answer. If you haven't bought the tractor yet, I would get the extra hydraulics or add the Summit diverter and get a hydraulic grapple.
@@GoodWorksTractors thanks for the advice. I was just thinking I would save the couple thousand john deere wants to add the hydraulics for a grapple and use that money to buy one of the grapples from you. But I will look into the overall costs a little more. Thanks again for the advice.. looking forward to more of your videos.
I was already a subscriber, but definitely added a "like" to this! I've been wanting to pull the trigger on a Brush Crusher (BC-4215 for a JD 3038e? -- I don't know much about loader types or whatever), but needed to watch more actual "at work" videos to talk myself into it. I think this may have done it. And my wife watched this with me, so that's an added benefit, because now it sounds like she's on board with it too! :-) Can you give me an idea of cost for what I need for my JD (I would want the center dentures), and discuss what shipping costs might look like (to southeast GA), esp. compared to buying from my local JD dealer. (I understand you probably don't want to provide an actual "quote" -- just generalities would suffice. Or I could contact you directly if that would work better for you.) Thanks for the info that I hope you'll provide, and just thanks for the video. It was SO helpful!
Hi Tim, Glad to hear it! Yes, this would work just fine on your 3038e too. Shoot me an email for exact pricing, but the BC-4215 is $1,699 plus tax and freight. Freight will depend on if it's a commercial or residential address, but it typically quite reasonable as they come in a compact crate. I'd be happy to help and thank you for watching!
Possibly in the future, but not imminently. Will do another in a month or two. However, functionality is the same as the other brush crusher shown in this video.
BUY One Large 7" x 12" Mirror! amzn.to/2Uit8ox BUY One Large 7" x 12" Mirror w/Bracket! amzn.to/2yMGvpV BUY Two Large 7" x 12" Mirrors w/Brackets! amzn.to/2wZCQUF
Awesome Video keep up the great content! What’s the price on a brush crusher w center teeth w skid steer quick attach? I have a new holland tc33. Any idea what shipping would be to Ann Arbor? Thanks
Hi Pete, I'd probably just have one of my guys deliver to you in Ann Arbor. $120. I don't think there is a version with center teeth on the ssqa version. I'll have to do a little more homework on that. Thanks for watching!
Thanks! Yes, there is a model, but I'll have to get details on exactly which one it is and the price. Do you have the JDQA, Global, or SSQA on your loader?
I’m a new subscriber and I was wondering what the price was for the second grappler with the middle section of teeth? Also I am wanting to purchase a wood chipper for my JD 3203 what do you offer as far as chippers?
Howdy, Here's a link to the 3 teeth Brush Crusher. www.goodworkstractors.com/product/brush-crusher-bc-4215-grapple-for-john-deere-loaders/ I can get you any chippers from Wallenstein. Thanks!
I have a JD 3038E and an older Westendorf Brush Crusher BC-4200, love it, has out preformed my expectations. It has a little JD Green paint left on it. ha ha. It did not come with the middle part as you're showing at the time of purchase. I heard that you can buy the top or the bottom separately, is that true? I think it would be best to order both top and bottom together. Is your price below for both top and bottom? What about Ag exemptions also?
Howdy, yes you can buy the top and bottom together or one or the other. If it were me, I'd just get the set. The $425 is for top and bottom. Yes, I accept farm use tax exemptions. Thanks!
Courtney I've been watching your vids for almost a year now. They keep getting better and better. It's weird it's like you can read my mind. I bought a 2025r and everything I'm interested in you end up doing a video on it. STOP READING MY MIND! Where can I get some info on your tar river tillers for my 2025? Thanks for the informative videos.
You'll have to email me on that one...those wheels/tires are for my personal tractor, but I can always get more. Shoot me a message at goodworkstractors@gmail.com if interested, thanks!
Good Works Tractors thank you for your quote for a brand new John Deere 1025R with Mauser cab w/heat, loader, bucket, grapple, snow blower, 60 inch auto-connect deck, 3 point blade, and a bunch of suitcase weights for $4,252.54. LOL, I’m kidding.
The pressure on loader arms is probably ok , but .. pressure on (fulcrum) bottom pins of of jd quick attach is not , it probably rip the pins off or through, $$$$, not a good idea
Hmm, not sure why you think that. I still think it's an excellent product, very innovative. It accomplishes the work of a grapple at the lowest price point. No other connections required, simple. I like simple :)
Oh, well yeah, similar to tractors, I don't think anyone makes the perfect grapple. I like the vertical nature of the bottom jaw on the Worksaver. However, that doesn't mean I don't like the Crusher. The limitation of the Crusher is when loading into high sided trailers as you cannot roll the grapple to unload. It has limitations, but that is not an issue for most folks.
Almost 300lbs for a grapple on a subcompact is way too heavy IMO. 285lbs is almost 100lbs more then a land pride grapple. Thats 100lbs less lift available...
I agree, however, I am selling far more of the 285 lb BC-4215 compared to the 200 lb Hydraulic mini grapple, 238 lb BC-4200, and 240 lb Electric mini grapple. So, you and I appear to both be in the minority on that one.
i don't think it such a great idea to show u running the mid-mount mower on while being in the woods. too easy to take off so its not gonna get all bent up.
@@GoodWorksTractors i feel when u fellas on u-tube are showing this equipment to say thousands of people u should be at ur best behavior---in other words take the thumping mower off, instead of running over a hidden stump or a pretty good size tree limb. and no it didn't look like u was on the edge of ur yard, while u was boring into the leaves clear up to the mower. too easy to take the mower off.
I went to Good Works this morning and bought a BC-4200 and could not be happier ! Great product and very nice working with Good Works Tractor Thanks again Courtney
Thanks again Jim! Hope it treats you well and Merry Christmas!
@@GoodWorksTractors And Merry Christmas to you sir !
Your honesty about saving weight will save a lot of folks many headaches. Most dealers will not advise to that hoping to sell a larger grapple.
I bought the brushcrusher 4200 a year and a half ago for my JD 3032e. I thought I would just pick up the larger limbs, but when they came out with the extra teeth, I just bought the lower teeth to keep the weight down. Now I can pick up small limbs also along with bigger leaf piles. I love it.
Nice! Thanks for watching!
The 3rd function is a must to get the most out of a grapple. Enjoyed the video. Well done!
Yes, at a higher price. Many folks prioritize price above all else which is the reason these products exist. Thanks for watching!
@@GoodWorksTractors These things are $2800. Where is the savings?
This guy actually replies to questions instead of just liking them :)
I try, but definitely can't always get to them all. Thanks for noticing!
Appreciate the vid. The demo and comparison works great for those of us deciding on implements/attachments prior to purchase. Kudos on the editing.
Thanks for the demo Courtney!
Thanks for watching GP 🤠
Great demo of the grapples Courtney! They did a good job of picking up the log and yard waste!
Thank you Photo!
Good video, man. You''re the first to demonstrate the electric grapple out in the field, I'm pretty sure.
I loved it, can't wait to take it to my hunting lease.
Good job 👍 you did really good! Thanks Larry
Thanks Larry!
Thanks for your very informative videos. I would really like to see the bc4300 in action. I am on the fence on purchasing one. There just isn't much out there to research and you are putting out the best info and well done videos I have seen. Good work 👍
The BC-4300 will function in the same manner as the other Brush Crushers. I'm sure I'll make a video with one at some point, but not sure when exactly right now. Thanks for watching!
Hi Courtney! Tim needs you guys to have another "play day" with tractors behind his house..........LOL Thanks for the great demo and vids. Can you just put a grapple seed in the ground, throw some dirt on it, water it and get a grapple?
😂That would be fun. Hmm, grapple seeds 🤔Might be on to something there!
great vid, Ive looked at the brush crushers, nice to see them all in action! thank you
Thanks Mike. Good to hear from you.
@@GoodWorksTractors Question: what is the benefit of the dual wheels on the rear of the tractor ?
Super informative, This is truly a great inside scoop on Grapples. Thanks Big C an so sorry about Rosie :(
Both of them seem to work great! I agree that the BC Crusher with the 3rd tooth I think would be a bit more versatile. But both are pretty cool especially not needing hydraulics. I do have one question. Should we be concerned about putting that much weight on the front end/axle, bearings etc on a small tractor?
Great video I been wanting to see more of the brush crusher grapple.
Those were good shots. Like that Brush Crusher. Based on what I saw in the video, it looks like the middle row is worth having. At least on the bottom. Thanks for sharing!
Thanks man! I agree, middle teeth would be nice...just a weight concern
Great video Courtney - Thanks for sharing how these grapples work - In my opinion, I think the BC-4215 is the best bang for the buck - The center teeth will make it invaluable for small brush etc. At 285 pounds the BC-4215 is only about 100 pounds more than the weight of the 53" bucket on the 1025r which will still give you about 600 pounds of lift capacity... I'm saving up to order one from you - Thanks....
Yeah, that BC-4215 is really nice with those middle teeth. Thanks for watching CCC!
Nice timing on the video. Looking forward to the BC 4215 I just ordered from you.
Thanks John! Yep, I think you're gonna love it 👍
Your videos are very informative thanks for taking the time to show these and explain the do’s and don’t s!
I seen video recently where the brush crusher on JD is putting pressure on the loader pins and damaging mounting bracket area anyone seeing that also. And does SSQA bc 4300 version have a similar issue to be concerned about
The brushcrusher is impressive. I liked when you only had control of the shorter log with one side of the grapple it didn't seem to display excessive flex.
I agree
Can I use my hydraulics from my backhoe attachment when not in use to use on a grapple long as I have a switch put on
I am impressed, looks like a well engineered product. I believe the center section would be a necessary part to have, it would really ramp up the versatility. How stable was the tractor with the larger log? Looks like the operator should take it slow & easy to avoid any uh ohs. Excellent video, Courtney, of what looks like a real back saving attachment!
Morning! Yes, center section is definitely nice to have...downside is the additional weight for the subcompacts. I was doing my best to be straight up and down any inclines or hills, so tractor felt very stable with the log clamped with either grapple. Thanks as always!
Please tell me about your dual wheel setup? Where can I find such a kit, and do you notice any notable difference in handling with them on?
DUAL TIRE INSTALL ON 1025R! WARNINGS & LIQUID BALLAST WEIGHT th-cam.com/video/m40nph0P_RA/w-d-xo.html
I absolutely love the increased stability.
I'm considering buying a Brush Crusher and am researching it. I'm curious, did lifting those logs damage the lynch pins in your skid steer quick attach mounts? I've seen others state that they had to replace those mount brackets because the lynch pins actually pulled through the mount bracket.
I think this might be the year I go after that worksaver. You might be hearing from me in the next couple months. Im getting too old to saw wood on the ground my back talks to me for weeks afterward.
Courtney, can the work saver clear the bed sides of a Ford F 150 using a 1025. I do not own a trailer so I need to take my brush to the local transfer station in my truck. It looks like the brushcrusher won’t because it has to be in a vertical position to dump. Gary
Hi Gary, what is the height you need to clear? I can take a measurement.
It’s 54 inches high. I am Guessing the brushcrusher is to low but worksaver might work.
Dumb question... can you use the rear hydraulic lines for the the backhoe connection to somehow operate a hydraulic grapple? The 3rd function kits seems stupidly priced to me
You would have to add in a valve with controls somewhere along the lines.
How much do you think a 5ft bucket weighs? Just to compare to a grapple.
Not sure, a few hundred pounds maybe?
How's the clamping force compared to a hydraulic grapple? Do you have one instock for a JD 2025R with a 120R loader? thanks!
Love your videos. However, could your videos cover more info using, say a JD 3038E, size?
I know this video is about the grapples, but I really like the duel wheels on the tractor, especially for loader or grapple work. I bet they are a big enhancement to the stability of the tractor. Thanks for the comparison video on these grapples. I'm sure that you are the only one with a video like this on the tube.
Thanks for watching Allen and, yes, I absolutely love the duals. I know they aren't for everyone, but it's an incredible difference in stability.
Great job brother, Band of Brothers and Sisters
Thank you!
Man, I was waiting for you to bring in the Kubota to see if it would lift that big log that the 1025r did!
😂 I'm not really sure if it would or not!
How do you like the double rear tires so far?
Love them!
Awesome video. thankya for sharing!!! I would love to have the Westendorf BC4200 with the middle row of teeth on both top & bottom rungs for my JD1025R. How much for that complete setup???
Yeah, pretty slick. $1,699 plus tax and freight for the BC-4215.
@@GoodWorksTractors Thankyou. so the BC 4215 is the one with the factory drilled holes for the top & middle rows of teeth????? or have i misunderood?
@@truckerray7533 4215 has top and bottom middle teeth installed. The newer 4200 has predrilled holes to upgrade if one choses.
I have a 4200 vintage 2018 without predrilled holes. Great tool to have available.
@@boydmasonlake1995 Thankya sir. I appreciate the feedback.
Good works tractors Wondering if you could give me an estimate on what it would cost to replace the elective grapple motor. I'm trying to decide which one I want. I'm planning on buying a tractor next spring and like the brush crusher since there's no extras to go wrong but I'm also considering the self leveling bucket and I've heard you can not use the brush crusher on that one. Thanks and look forward to your response.
Good question, but I'm not sure the answer. If you haven't bought the tractor yet, I would get the extra hydraulics or add the Summit diverter and get a hydraulic grapple.
@@GoodWorksTractors thanks for the advice. I was just thinking I would save the couple thousand john deere wants to add the hydraulics for a grapple and use that money to buy one of the grapples from you. But I will look into the overall costs a little more. Thanks again for the advice.. looking forward to more of your videos.
How do you like the duals? I use my 1025r for tree work, we regularly get one or both rear wheels off the ground lol.
Love them
Great videos, you scrunch your face every time you close the grapple lol
Does the bottom jaw of the Work saver have replacement teeth or are the part of the jaw
Hi, it's part of the jaw
Do you have a video of you installing the dual wheels
Great video! Will the 4200 fit the 3032e? Thanks!
Yes sir, it sure will!
@@GoodWorksTractors Awesome! Thank you!
Welcome!
I was already a subscriber, but definitely added a "like" to this! I've been wanting to pull the trigger on a Brush Crusher (BC-4215 for a JD 3038e? -- I don't know much about loader types or whatever), but needed to watch more actual "at work" videos to talk myself into it. I think this may have done it. And my wife watched this with me, so that's an added benefit, because now it sounds like she's on board with it too! :-) Can you give me an idea of cost for what I need for my JD (I would want the center dentures), and discuss what shipping costs might look like (to southeast GA), esp. compared to buying from my local JD dealer. (I understand you probably don't want to provide an actual "quote" -- just generalities would suffice. Or I could contact you directly if that would work better for you.)
Thanks for the info that I hope you'll provide, and just thanks for the video. It was SO helpful!
Hi Tim,
Glad to hear it! Yes, this would work just fine on your 3038e too. Shoot me an email for exact pricing, but the BC-4215 is $1,699 plus tax and freight. Freight will depend on if it's a commercial or residential address, but it typically quite reasonable as they come in a compact crate. I'd be happy to help and thank you for watching!
I'm still like the electric one! Was digging the music!! Lol
😂
Are you planning on posting video with the Kubota?
Possibly in the future, but not imminently. Will do another in a month or two. However, functionality is the same as the other brush crusher shown in this video.
what is the 1025r loader mounted mirror part name and number and where can I buy it?
BUY One Large 7" x 12" Mirror! amzn.to/2Uit8ox
BUY One Large 7" x 12" Mirror w/Bracket! amzn.to/2yMGvpV
BUY Two Large 7" x 12" Mirrors w/Brackets! amzn.to/2wZCQUF
Great Video! . I like seeing how the stuff works, gives me Ideas( an excuse) to buy one !
Haha, I know what you mean!
What tires are on the dually, and are they hard on turf in a single wheel configuration?
Looks like the brushcrushers bottom support will scratch and maybe stress out lifting arms. Not sure if I'd like that.
Great video, thanks.
Awesome Video keep up the great content! What’s the price on a brush crusher w center teeth w skid steer quick attach? I have a new holland tc33. Any idea what shipping would be to Ann Arbor? Thanks
Hi Pete,
I'd probably just have one of my guys deliver to you in Ann Arbor. $120. I don't think there is a version with center teeth on the ssqa version. I'll have to do a little more homework on that. Thanks for watching!
What tires are those on that last 1025r?
Cool feature but I'm eyeballing these dual rear tire setup lol Need to know more
@9:46 I thought an episode of "This Old House" was starting 😂
🤣👍 Love it!
Very good video, do you sell a brush crusher for a JD 5065E
Thanks! Yes, there is a model, but I'll have to get details on exactly which one it is and the price. Do you have the JDQA, Global, or SSQA on your loader?
@@GoodWorksTractors JDQA
I've asked the manufacturer.
Hi David,
I heard back and you'd want the BC-4255. Shoot me an email with your zip code and I can work up a quote, thanks!
I notice The dually tires make a big difference
will this fit 2305 with a 200 loader
great review
Thanks!
I noticed that you advertise used tractors and wondered if you sell the new ones also. The grapple seem to work just fine on the John Deere tractor.
Hi Sidney, I only sell used tractors.
Yes
Will the BC4200 or BC4215 fit a 120R loader
Yes, both will fit
I’m a new subscriber and I was wondering what the price was for the second grappler with the middle section of teeth? Also I am wanting to purchase a wood chipper for my JD 3203 what do you offer as far as chippers?
Howdy,
Here's a link to the 3 teeth Brush Crusher. www.goodworkstractors.com/product/brush-crusher-bc-4215-grapple-for-john-deere-loaders/
I can get you any chippers from Wallenstein. Thanks!
I dont need the 4200, already have it. Just the middle part, upper and lower! How much?
$425 plus tax and freight for the middle section by itself.
Sounds great, I'll pay the tax and you pick up the freight! Then we have a deal!
Ha, freight will be quite reasonable for ya.
I have a JD 3038E and an older Westendorf Brush Crusher BC-4200, love it, has out preformed my expectations. It has a little JD Green paint left on it. ha ha. It did not come with the middle part as you're showing at the time of purchase. I heard that you can buy the top or the bottom separately, is that true? I think it would be best to order both top and bottom together. Is your price below for both top and bottom? What about Ag exemptions also?
Howdy, yes you can buy the top and bottom together or one or the other. If it were me, I'd just get the set. The $425 is for top and bottom. Yes, I accept farm use tax exemptions. Thanks!
Courtney I've been watching your vids for almost a year now. They keep getting better and better. It's weird it's like you can read my mind. I bought a 2025r and everything I'm interested in you end up doing a video on it. STOP READING MY MIND! Where can I get some info on your tar river tillers for my 2025? Thanks for the informative videos.
😂Sorry! Here's the TXG Series...thanks! www.tarrivermfg.com/tar-river-implements/tar-river-compact-rotary-tiller
Awesome channel thank you
We’re do you get the electronic cylinder
It comes with the grapple
Good Works Tractors is that a frontier grapple
@@jasongray6145 It is manufactured by Worksaver, Inc.
Looking for a jd 3520 with the cx loader with low hr
I'll keep it in mind
Subscribed
How much $$ is the brush crusher?
Howdy, pricing is on my website for all the options. www.goodworkstractors.com/products/tractor-attachments/
This almost feels like a tractor time with Tim TTWT episode lol but hey it's a good one. We can see them a work. It's a good idea
That's a good thing, right? 😂🤠👍
@@GoodWorksTractors yes indeed
Duals on a John Deere. Well that size. Cool
👨🌾😎👍
Why duals?
I wanted to! 😂 Stability mainly...I think these tractors are really tippy side to side
@@GoodWorksTractors yeah very true
I have a Case 45 CVT compact tractor. Looking for an electric ( don’t have the 3rd function) . What do you recommend?
That would be for a grapple
How about a Brush Crusher BC-4300?
@@GoodWorksTractors I took a look at them. I think that would work. Do you have to move hoses or just drop the bucket and put the grapple on?
Great video and explanation. Looks like you were having fun too.! Btw was that you whistling during the first song? 🤔
Haha I have zero musical skills
Checking in for 1st from California - is that 1025?
Yes sir, both used in the video are 1025r's
@@GoodWorksTractors nice - I have a lot of trees that are on the grounds this spring. Might be reaching out later. Thanks
Enjoy that California sunshine! We have some here in Michigan today too!
Good God man. $2900 or $2500 ?!?
Holy smokes you might wanna call Tim
How much for the 1025r with double wheels & brush crusher?
You'll have to email me on that one...those wheels/tires are for my personal tractor, but I can always get more. Shoot me a message at goodworkstractors@gmail.com if interested, thanks!
Good Works Tractors thank you for your quote for a brand new John Deere 1025R with Mauser cab w/heat, loader, bucket, grapple, snow blower, 60 inch auto-connect deck, 3 point blade, and a bunch of suitcase weights for $4,252.54.
LOL, I’m kidding.
The pressure on loader arms is probably ok , but .. pressure on (fulcrum) bottom pins of of jd quick attach is not , it probably rip the pins off or through, $$$$, not a good idea
i clean thos products
Well.....watching this channel is getting expensive
I was Carrying a log with my brush crusher on my 4320 and I destroyed it
You destroyed the log, the Brush Crusher, or the grapple?
Sadly I would have to say it was my brush crush but with a trip to the steel yard
, some welding and some yellow paint it’s good to go
Sounds like after watching more recent videos you're not that big of a fan of the brush crusher.
Hmm, not sure why you think that. I still think it's an excellent product, very innovative. It accomplishes the work of a grapple at the lowest price point. No other connections required, simple. I like simple :)
@@GoodWorksTractors Just because you said you like the work saver quite a bit better and the brush crusher has quite a few limitations.
Oh, well yeah, similar to tractors, I don't think anyone makes the perfect grapple. I like the vertical nature of the bottom jaw on the Worksaver. However, that doesn't mean I don't like the Crusher. The limitation of the Crusher is when loading into high sided trailers as you cannot roll the grapple to unload. It has limitations, but that is not an issue for most folks.
These non hydrologic grapples are just as expensive as the hydrologic versions.
Almost 300lbs for a grapple on a subcompact is way too heavy IMO. 285lbs is almost 100lbs more then a land pride grapple. Thats 100lbs less lift available...
I agree, however, I am selling far more of the 285 lb BC-4215 compared to the 200 lb Hydraulic mini grapple, 238 lb BC-4200, and 240 lb Electric mini grapple. So, you and I appear to both be in the minority on that one.
Should of told the price
Poor Christmas tree. It got electric grappled.
😂
Some day when I can talk the wife into it
Its easier to ask for forgiveness than permission
@@davidparadis490 lol you make a good point . But our couch is an uncomfortable son of a bitch.
@@jeffbenjamin6480 haha, I write this from my couch...you get used to it.
@@davidparadis490 I should shut up next I'll be buying a couch
1
Beat me by seconds.....
🥇🎉🏆👏
photo finish! 🤠
@@SummertymeJamz like .....120 seconds😅🤣😂
@@SummertymeJamz like .....120 seconds😅🤣😂
i don't think it such a great idea to show u running the mid-mount mower on while being in the woods. too easy to take off so its not gonna get all bent up.
It was on the edge of my yard Jim, quit nitpicking. 👍
@@GoodWorksTractors i feel when u fellas on u-tube are showing this equipment to say thousands of people u should be at ur best behavior---in other words take the thumping mower off, instead of running over a hidden stump or a pretty good size tree limb. and no it didn't look like u was on the edge of ur yard, while u was boring into the leaves clear up to the mower. too easy to take the mower off.
like my blue and white baby better lol
👍
You had 3 grapples and you show two on a green paint tractor , I have a Mihindra so I guess grapple like this are no good for me.
Okay
Kenneth,
The Worksaver model also is available in a Skid Steer mount, which should fit onto your Mahindra.
I like the content of your videos but the constant stop/start one sentence video editing is painful to watch.
Can't please everyone
Just buy a yard take..