I Built One Of The Star Wars Rarest Tanks Star Wars In LEGO!
ฝัง
- เผยแพร่เมื่อ 29 ก.ค. 2024
- I Built One Of The Star Wars Rarest Tanks Star Wars In LEGO! My lego star wars UT-AT moc is finally finished and it's time to see the finished result! It's just under minifig scale has posable has room for 15 plus minifigs and has the most play features of any moc I've ever built!
If you would like early access to content as well as exclusive content or be featured in my next Moc checkout my Patreon!: www.patreon.com/user?u=52674170
Want to help support the channel even more? Buy a Tee-shirt: coconut-bricks-studios.creato...
Follow me on Insta: instagram.com/ - บันเทิง
Only thing I don’t understand about this canonically is that ability to go over uneven terrain, for the most part isn’t that the point of walkers in Star Wars in general? I feel like the AT-TE with its 6 legs can arrange them in better positions over terrain to get a stable firing position than this relatively flat, low to the ground vehicle can. Just unsure how this thing fits into the Republic army in general… same with that obscure gun boat from Utapau. Great build of an obscure vehicle though!
Not sure, but I think the UT - AT had the advantage that the repulsorlift made it lift above the ground, so the weight of the vehicle is not forced onto the terrain. Other Vehicles like the AT - TE can get stuck in unstable terrain like mud or sand because there weight causes them to sink in.
It's not for uneven terrain, it's for unstable terrain, places that can't handle the weight of a bigger size walker and it's vibrations and impact from the steps
Ice, thick mud, and (correct me if I’m wrong?) deep water, or a weakened bridge that could collapse (the lore reason for their creation) are all the reasons why this rank was created
The Utapau gunboat are actual flying vehicle. They are designed for high speed atmospheric reentry.
Unstable terrain like a bridge that’s falling apart that if you had really heavy steps from something like an AT-TE would risk collapsing part of the bridge
Repulsors would spread the weight across a wider area refusing the psi
Goated moc
Amazing to see this beast finished! You can really be proud.
I do think the light gray side panels do take away from the look significantly tbh, i think replacing them with a light blueish gray assembly would be a worthwhile upgrade.
Love the finished product. Absolutely fantastic and definitely unique!🎉
I need one of these in my collection. I also need an AV7 cannon. I realized this morning that i don't own a droid tri-fighter but have ordered all the exclusive parts for quite a few SW sets over the last few years and so i just went through my collection and was able to build one so im in a good mood today
That's awesome! I love when I am able to build something with just parts from my collection.
Im finally back, and i can’t wait to see the moc when is done
dude you've done a superb job on the UT-AT and next to AT-TE it looks amazing, for anyone that didn't know it could easily be a Lego set and I would have it proudly on display any day of the week 👊🏼
Thanks! I am so glad the tank has been well received it's really boosted my confidence.
This is a really cool build and i think its gonna uplift the the Mygeeto Moc by a lot. Really fun seeing the progress on it week by week and impressed with how clean you made the angles
For not being a claimed vehicle builder…dang, that is awesome! 🔥🔥. Would love to see you take the time, sometime, and make it minifig scale! Solid work Coconut.
That is really awesome. I think that you should make a separate series on building the magnum octupara tri droid.
Bro I absolutely love this design. I think is probably my favorite tank in the star War universe at least ground unit. Keep up the great work and see you next time
Great build, I am amazed at your work. Love the side build series, I think it is a great way to show off something in more detail!
Final design looks great Coconut! Keep it up!
You did a great job with this build! From start to finish watching how you solved each and every design issue that arose was most enjoyable. I was rooting for you the whole time, great end result!! I look forward to seeing this featured in the final Mygeeto Moc. Rock steady my dude!
✌️❤️🌮's
Thanks man! It was fun to sit down each episode and just build until I found a solution the small scale of the vehicle meant I had to spend less time with boring filler building!
Looks great! So excited for Mygeeto!
Such a great build.
That is the best looking utat I've ever seen.
Thanks.
Incredible work
I love the tank your the best builder ever love the clones and the phase 1 clones
Much appreciated!
This looks phenomenal dude! Love this Mygeeto series and keep up the good work dude!
Amazing build and looking at the actual image of the UT AT it’s actually pretty close to minoring scale
Thank you.
This tank is so awesome! It looks better than all LEGO Star Wars tanks put together! It's been real fun seeing it come together piece by piece. Happy building!
Now we need instructions for this beauty.
Watch the intro.
Neat! does look cool on the war damaged bridge with the snow on the bridge with the troops in the front.
Would be so cool if you add this in the moc with the rear door open and some light inside so week-end could see all the work you've achieved
Omg that is awesome keep up the good work!
It’s cool
Looks great!
Thanks man.
Looks amazing man you have done a great job on this project !!!!!
Much appreciated bro!
Bro this is sick, honestly the best one of these I’ve seen. Keep up the work. You’ve inspired me to start my own channel
Thanks I'm happy to hear that.
Truly amazing build! Love the finished product!
(Are you sure you can't make the design on brick studio or something? I would love to try and build something like this for my collection!)
Looks great 👍🏻
Appreciate it Chef.
This UT AT is perfect !
Thanks man!
It turned out amazingly, thanks for the shout outs😊.
Thanks for your help! I am enjoying the naboo series.
@@coconutbricksstudios Were getting a lot of progress done every upload. Great job, let's party!!!🥳🎉
"Oh it's beautiful"
Next time you do something like this can you do a full build and recorded it so we can build it I think it would be awesome so can you please think about it
I made a full series of it being built, it's on my channel.
You should have bought the custom tank from republic bricks, it’s much easier to build and is still VERY COOL. You could also see if it actually is a good site for custom sets or not, they deal with Star Wars stuff
Republic bricks steals other peoples designs, I'll stick with my own builds.
@@coconutbricksstudios it does?? I did not know that, btw could you do the battle of kamino for your next moc??
It looks so coooool! Love it! Are you gonna light up the headlights for the final display? ❤
No lights for the tank.
The panels are impressive. Angles are tough with LEGO but I think you pulled it off pretty nicely here. Come a long way from even the ones on the senate building :)
Thanks the senate roof helped set me up for builds like this
I wanna use your design for stop motion !
You can make so much money if you post instructions!
Woah that ut at is really dope looking. Hey any advice working on building a custom at te moc?
Use lots of reference material.
@@coconutbricksstudiosthanks I just finished mine and it came out quite well. Also love your Mocs and you have been a big inspiration for my mocs
Beautiful tank! Missed opportunity though not to make instructions for it nor to provide the brick count.
Missed opportunity how? A piece count will do nothing for me and all the time I would spend creating instructions would be better used elsewhere since I would sell maybe 15 of them. Time management is really important when building large mocs.
Are you making build directions for it?
I address that in the intro.
I guess you’re just going to have to reverse engineer this puppy and then get us them instructions
I am music
zajebiste
I missed so much progress I’m sorry 😭😭😭😭
First hour
Are you gonna make instructions for this?
Couldn't even get 30 seconds into the video! 😅
Watch the intro.
Ok and