Turnigy 9X 2.4GHz radio control system Version 2 review (Part 1)
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- A quick look at the new Turnigy 9X version 2 from Hobby King. This video looks at how the radio performs on the bench and how to bind it. The next video will show the flight test and some more details on the performance of the new FHSS module/receiver.
![เปิดใจ พี่ญา คนรุม หลังทัวร์ลง หนักสุดในชีวิต!! l [Nickynachat]](http://i.ytimg.com/vi/2-OJZRtclro/mqdefault.jpg)
16 primary frequencies to counter radio interference does sound excellent to me. I am extremely interested in that test flight review part.
So far you've got some extremely good reviews, thanks a lot. :)
Bruce thanks so much for the review. I've had my eye on the Turnigy for over a year but kept avoiding it due all the V1 problems. Looks like Turnigy have really cleaned things up with V2 and I feel it is good due to your technical investigation. As long as I keep up the "It's only $60." mantra I think I will like it just fine.
This is the best priced rc system and product in rc history.
54$!!!!! Amazing
Correction. The difficulty in sliding the switch is not related to the screws but the bending of the circuit board the switch is connected on. The circuit board has two long, springy metal tabs that make contact to the back half of the TX. With the shaft from the 9Xs neck strap loop removed, the circuit board will bend slightly when putting the two halves back together. My fix was a 7/8"x5/8"x1/4" piece of wood and foam cut to the same dimensions. Slide it foam side up under the circuit board.
RCModelReviews Rocks :) Thanks a lot Bruce for all the info you are giving to us :)
Difficulty in sliding the power switch can be related to the tightness of the two small screws holding it in place. Today I replaced the neck strap loop with a 3rd party one and had to remove the shaft that was holding up one side of the circuit board the power switch is connected to. As a result I really tightened the two small screws holding the other end of the circuit board. The power switch is much more difficult to slide than how it came from the manufacturer.
This radio seems to have such potential, but FlySky does not seem to see beyond offering the cheapest solution.
At $60 plus $11 for additional receivers this is a great option for the casual weekend flyers as is. Pending the flight tests of course.
Upgrades to look at are a LiPo battery, A plug for firmware updates, third party firmware, at least one allows resetting the low battery warning level.
Other receiver options would be a wonderful addition as well. Both higher end and lighter weight
Great review with great content. I really like how you present it.
Thanks
Good review! I got the Turngy 9X a month ago and I am extremey impressed to say the least. I got it for $38 dollars plus shipping from hobbyking and the backlight kit was an extra $5. Its remarkable what you can do with it. It is by far the most programmable radio ive used. Only dislikes are the reciever is too big, the batteries are hard to get in and out and that annoying beep every button you push. Otherwise A+
Great review.
For the rest, you are all very critical of this Radio. You must remember what you are paying for this system. If you want it all expect to pay $500+. Just enjoy this hobby and remember even the best radios cant make you an great pilot. Happy flying.
Bruce, First I want to thank you for the clear concise videos you produce. Next, I want to replace my son's Dx5e but have lost confidence in DSM2 due to too many signal loss induced crashes. The difficulty we have in getting away from Spektrum is the fact that he already has a number of Parkzone Ultra Micro flyers.
Here's my question. Do you consider the Dx6i to be more reliable than the Dx5e and do you know of a DSM2 module that can be used with the Turnigy 9x?
Hey Bruce - just stumbled across this vid and your others on spectrum analysis. Thanks so much for this. I have a 9X and a DX6i so it was great to see the difference between the true frequency hopping of this radio and the older DSM technology. I have greater respect for my $60 radio now! In truth I liked it already. May get another and do the FrSky conversion if I feel the need for failsafe, though I notice there is a failsafe setting in the 9X menu - does it not work in your experience?
Great quickie review Bruce. I'm interested in seeing how much the software has improved. My V1 software is driving me nuts - ok, ok its a $60 radio but decent software aint that hard to do. Also interested how I could fit my Assan module. On the V1 it waggles about so I had to tape it on.
Hi Bruce, Good intro review, good points raised on the V2.. I like the rf freq hopping now, but the wired in module "option" is a total step backwards. What are they at (flysky) thinking? Propriatry only thinking..? Its an 'open systems' world now with people wanting to use existing modules out there or other brands & not even backwards compatible with their earlier v1.4 modules..
is there a part 2 loved the review was wanting even more info thanks :)
@xjet oh ok sounds good im looking at getting my first digital radio and am extremely computer savy so i thought going the Turnigy route might be ok instead of going the Dx6i. i look forward to the video and watching all your videos - Cody
Please Bruce , I'm waiting for part 2 !!!!!!!
@travellingpurdy I have this Turnigy 9x v2 Tx and it has no range issues whatsoever. I just don't know how well it goes beyond about 350m as that's as far as I've ever flown one of my plane with it.
No glitches or anything though, rock solid signal strength, so it's not near the edge of it's range with 350m for sure! In comparison many other Tx reach 1,5km without problems, so it wouldn't be too much of a surprise if this one can do the same. I just haven't confirmed this yet myself though.
Thank you so much for this review.
@KaldekBoch The problem is that this radio used to have a 72mhz module in it on v1, so when they removed it the tx became unbalanced.
@VETTE811 In mode 1 the throttle is on the right and in mode 2 the throttle is on the left. Very important to know, otherwise you'll have problems...
@Aabish72 @RCModelReviews I too am very much looking forward to this video!
I was wondering if it would be a wise idea to convert the antenna into an SMA connector instead. This way boosters and what not could be added very easily? Also when using a module with its own antenna it can be easily unscrewed?
Thanks Bruce for your work. Where about in Australia are you from?
We have reached 5km with stock receiver and module, using 2.4ghs patch antenna and fpv system. Its quite good for 50$ radio.
I bought one without module and receiver, just the transmitter.
It was always losing centerpositions on sticks, I have send it back and hopefully I'll get one without that problem.
@RCModelReviews I don't use the neck strap either, seems like I want to keep a thumb above the gas stick anyway all the time when not flying.. Plus it's just in the way.. It doesnt feel safe..
hold bottom right stick trim left, and the left sticks throttle trim up to put it in calibration mode.
Thank You, for a great review, what kit would I buy to do your conversion and where is the best place to buy them from? You should open a Hobby Shop you would make a lot of money!
Hi there bruce , Thx for all your hard work making these very informative vids , just read your 8$ diy battery mod and are woundering could i use a 2s 2800mAh 30c lipo ? and just solder the transistor in place to get rid of the anoying bips
@RCModelReviews Fair enough, tough guy! I'll see if it changes when my Lithium Ion battery cells arrive for the $8 battery mod. :)
Thanks for sharing the video!!! Great! Wich one would you recommend, Spektrum DX6/7 or the Turnig 9X? thanks
Bruce, do you find that the 9x feels a bit bum-heavy? I always use a neck strap and found that the position of the loop on the radio is too high, resulting in the radio requiring more effort to hold it horizontal (as compared to my DX6i anyway).
Ya I have seen the smaller 6 channel reciver for the 9x but I cant seem to find one anywhere. There not on hobbyking or even ebay for that matter. If I cant find one, ill try to use another brand that has been known to work
Obrigado(Thanks) Bruce, por suas valiosas explicações - Ciro Brazil.
What happened to Part 2? I was looking forward to it...
Ten years ago $60 would barely get you two servos from a local retailer... Actually, those prices mostly remain true, except for those who buy from HobbyKing and resell the products onward.
@RCModelReviews LOL, nice one Bruce!
excellent review, thanks
Since this is an FHSS system I think that why they didn't put the fail safe in there because there is a lower change of getting interference and plus its 2.4 ghz so there even less change of getting interference. I'm guessing that your only getting about one glitch per radio maybe more, maybe less by 3 or 4.
Did you do the video on using other modules and getting rid of the wire hanging on the module?
do you make your videos in a hanger ? Are there only modelplanes?
you've probably got this question but how did you change the knobs and which knobs are those that you have on your imax 9x?
@xjet lol this vid is like 2 years old... but i still loved it
The Leader Hobby version of this has the antenna as part of the module so it isn't hard wired but I dunno if its v2 hardware or what..
what is the range for the flysky th9x v2?(the one with the antenna stick out at the module)and is there any way to get more model memories?and is it good for long range fpv?
Hi there Bruce
I loved your reviews on the turnigy 9x, I recently upgraded mine with the Frsky Diy module and I also placed a Smartie parts board and uploaded the Er9x software. I really like how it works. I would love to know your thoughts.
sincerely
Joe your biggest fan in Washington state, USA
I have seen on your website that u have converted to Li-ion batteries in all of your apps, can you please make a video on different kinds of li-ions, and their prices are hugely differs per mah at ebay , don't know how to select batteries for my tx and to power my models.
Hello what is the software and hardware you use to to find out how many hop on frequency?
I have had nothing but issues with the turnigy radio. It has been responsible for the demise of two planes now and I am done until I can get the frsky dyi kit. Besides the frsky, is there any others I can use with this transmitter?
around 700m range and you have to change the fermware to get more models
Hi RCmodelreview. I have this radio. Is it safe to use it on a .25 size funfly plane or .50 size plane? Please help. Im totally confused. Thank you,
Hi. I have managed to bind 2 of the Turnigy 9 Ch. receivers with my new 9x (V2) transmitter, and can run servos on the elevator, aileron and rudder channels, but cannot get my motor to respond to throttle. Confirmed that the motor is OK...it works when using an alternate ESC/Tx/Rx from Dynam. Any suggestions?
Not bad..no problem..easy and very good radio to mod ER9X
you say at around 8.45 that by putting a module in the turnigy and having the modules ariel behind the built in one it will suck the energy. what exactly do you mean when you say it will "suck the energy" and will I have this problem if Install a FrSky hack module with its ariel mounted beside the turnigy's ariel. cheers
Can the 9x trims be programed to a switch(es)? I'm looking for a 2.4Ghz Tx that will be compatible with Tamiya tanks. Thanks.
I just ordered the FlySky FS-T6 but now i'm wondering if I made the right choice, where I live the FlySky is cheaper by 30$ but i'm worried because I have read that while they are basically the same, the Turnigy has better range, is thet true ?
can you help...?.............. i checked the firmwier on my eurgle 9x and now my al,ele,rudder doesnt work now. do you know what the problem is?....
i just wanted to know how good this radio is for some one who has not got much experiance of using radio controls?
WHAT IS THE DIFFERENCE OF THE TURNAGY 9 CH MODE 1 AND 9CH MODE 2????? AND ARE THEY ANY DIFFERENT FROM THE FLY SKY 9 CH
What was the range, I test mine for many flights without problems but sudennly everytime y turn to landing position suddenly turns ailerons like crazy!!! What could it be. Range 300 mts
sorry for my question, but you would recommend this radio for thrust vectoring system?
mode 1! good on ya!
Can someone please explain how to configure aileron and rudder mixing for the AXN?
This thing didn't happen to come with a battery charger, did it?
What kind of range can one expect from the 9x..... I don't think it would be much especially for $50
@lihwoei Then again there are some flaws in the firmware that some people might not tolerate, even for only 60 bucks.
I agree with you though, for it's price the Tx is awesome.
will this work for most flight simulators? like Pheonix?
Do you have a way to fix a Turnigy 9x 8channel receiver? I accidentally inserted the bind plug on CH8 then the battery on BAT row where it should be the bind plug is at BAT and the battery is on the BIND row.
My receiver is not working anymore. No lights at all.
Jayson Ragasa hi! do u still have the receiver ,if so , i can help u out with the repair .
cheers!
does the flysky th9x have the same fhss?
Nice one Bruce and i've been looking forward to this as i'm in two minds to get on or not but i'll go take a look at the website before i do make my mind up,like you say it is only $60 but whats the manual like mate as we all know the Asians ain't to sharp and there manuals or translating them should i say ;-) thumbs up.
what is freqency hoping?
What's the range?Plz tell me
I calibrated it, but there was no change about that.
'
what country make this R/C system turnigy,,,
can this R/C turnigy use on the ground surface,,,
not need it use airplane / helicopter
where is part 2?
today i just crashed a plane with this radio, took off well but 20 seconds into the flight, and the radio just didnt answer to my movements, i tried to turn the aircraft and suddenly it made a roll, after that it went out of control and ka-boom.
Flysky version comes with a manual.
Wich is a good thing if you dont want to turn off your transmitter by accident!
Wheres the flying video?
you did an unboxing LMAO :)
@ocastanontube I get about the same range as yourself. 250-300m. Oh well, the tx module and rx is pretty worthless.
I know others have upgraded with pcb mods & their own software versions. A factory software update thats user friendly would be a good start..but hey that would sell them less (flysky, turnigy, eurgle, imax..etc) "new " rx & tx units..and off course leave it toooo easy for other "chinesse pirates" in their own backyard paddy field to reverse engineer & copy it! ... "Anyway its a $60 radio" ..Must write that one down 100 times to remind myself.. its a $60 radio... its a $60..
Pretty bad design! wiring in a changeable module, if this is sorted out and you can buy one without a module and just have the antenna with an SMA plug externally, I would put a frsky module in it.
Can't wait for a video of that far eastern FPV set, what kind of price are we talking? Average far eastern stuff or more the average price for these cameras? I would love to do FPV but I can't really afford all these bloody expensive £100+ cameras!
pwn to the spectrum'ers
im from the uk and ive just paid £90 and you paid $60 fucking uk everythings expensive immergrate i think..
no
what is the complain...??? just only 60 dollars...are u expect to have futaba 14MZ system in it...? really stupid review and comment...i'm using Turnigy 9X for my nitro plane and EP. No problem and complain at all for the price VS system...if u want good radio...just go for 14MZ...but will u able PAY for that...?