Detail configuration S7 1500R connection with I/O Device, HMI TP comfort panel & Managed switch S2
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- - Instruction configuration hardware
- Instruction configuration software
- Instruction establish connect S7 1500R with managed Switch SCALANCE & I/O Device
- Instruction establish connect S7 1500R with HMI TP700 Comfort panel
* At the end of the video, because I plugged the port for the HMI to port 1, the switch reported an error.
* When you configure, remember to check the HMI port
Good luck!!!
- Các câu hỏi và thắc mắc inbox cho mình vào zalo: 0962239296.
- Trên kênh các bạn cần PLC, Biến tần Siemens hãy liên hệ với mình giá cạnh tranh hàng mới BH -12 tháng.
#S71500R/H #SystemRedundancyS71500R/H #RedandancyS71500 #Stormy
Thank you friend
It was very useful video
Highly appreciated effort
Best regards
Thank you for your video. I learned a lot of thing from here
Yes many thanks. If you have further questions don't hesitate to contact me.
Excellent , Thanks
Thanks ... very good video, But I have a question ... Have you written any script in TP700 comfort for redundancy? Can I use KTP700 for this configuration instead of TP 700?
Awesome video. Why is the setup still red at the end of the configuration and commissioning?
I forgot because I plugged in the wrong port of HMI comfort
But why primary red?
Hi AD, mình xin hỏi switch chuẩn S1 và S2 mà AD nói là gì nhỉ?. Mình hiện đang vướng 1 vấn đề đó là các trạm ET200SP của mình ở xa nhau phải chuyển đổi qua cable quang, liệu có ảnh hưởng đến hệ Redundant này ko?
Is it possible to remove one CPU from both and disable the redundancy from the system? My client would like to run one CPU only in the system
your's video is very useful .however,i have a issue when i connect from scalance xc 208 to PLC . can you help me ? ..