Simple, Quick and Easy Way to Remove Foam From Your Bench Seat {Jon Boat to Bass Boat} Lowe 1436
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- DON'T MISS THIS ONE!!! A big part of this jon boat to bass boat conversion is to gut my middle bench out to create storage. In this video you will see exactly how I went about my jon boat foam removal from the bench seat. This technique works out to be faster and with less effort than any other technique I have tried in the past to remove foam from my jon boat. This is one of the most effective ways to add storage to your jon boat. You won't want to miss this one. Enjoy the video!!!
Please tap that like button and subscribe to our channel to stay up to date for future videos!!!
For boat builds, please message me at:
Instagram: / bass_brothers_fishing
Facebook: / bassbrothersfishingdmv
Email: bbfishing.dmv@gmail.com
TBNation 5% Off: tbnation.net/?...
TBNation checkout code 5% off: BBF5
Amped Outdoors Affiliate Link: ampedoutdoors.com?aff=7
YOLOtek 5% off: www.YOLOtek.co...
YOLOtek checkout code 5% off: BBF5
Top playlists on our channel:
Lowe 1436 Boat Conversion: • Lowe 1436 Boat Conversion
Lowe 1448 Boat Conversion: • Jon Boat Conversion
Pelican Bassraider: • PELICAN BASS RAIDER 10e
Alumacraft 1232 Boat Conversion: • Alumacraft 1232 Boat c...
Vibe Kayak Mods: • Vibe Kayak Mods
Send us stuff at:
Bass Brothers Fishing DMV
PO Box 71
Spencerville, MD 20868
Links down below to various products used in my builds for your convenience. Affiliate links help to support the channel and allows us to share this content with all of you.
EVA Foam: amzn.to/3eDTbUT
Tools Links:
Angle Grinder: amzn.to/3QvRdnV
Jig saw: amzn.to/3Qxnev... Saw: amzn.to/3HHjrZ2
Band Saw: amzn.to/3HHjrZ2
Reciprocating Saw: amzn.to/3Omqw33
Tin Snips: amzn.to/3bbS6lu
Drill/Driver: amzn.to/3Hxt0ts
Impact Driver: amzn.to/3tKvmPU
Compact Impact Drill: amzn.to/3N3H92s
Manual rivet Gun: amzn.to/3mWYwrc
Cordless Electric Rivet Gun: amzn.to/3mZdehn
Heat Gun: amzn.to/3baPtAp
Fish Tape: amzn.to/39yUxhB
Wire Cutter, Stripper, Crimper: amzn.to/3QvYPXr
Gloves: amzn.to/3N1x2LO
Safety Glasses: amzn.to/3N4fWg0
Ear Muffs: amzn.to/3O2V4HF
Tape Measure: amzn.to/3OsMkdD
Level Tool: amzn.to/3bePP9j
Speed Square: amzn.to/3zMv2DV
Orbital Sander: amzn.to/3zMJcVY
Metal Filer: amzn.to/3N3LEdp
Camera Gear
GoPro 7 Black: amzn.to/36Tt6Lq
Gopro 7 Silver: amzn.to/30P4tMj
External Mic: amzn.to/2GYgjg8
Lavalier Microphone Wind Screen: amzn.to/3lyMXnj
Rode Wireless Go: amzn.to/34HEwiY
Saramonic 3.5mm Plug and Play Mic: amzn.to/3iJUwpn
GoPro Case: amzn.to/3nEWwCX
Camera Video Light: amzn.to/3dgTpfI
Camera Light Rechargeable Batteries: amzn.to/36TCT4c
External Battery Small: www.amazon.com...
External Battery Large: amzn.to/3lDld0L
Rod & Reels
Lew’s Mach 1 Combo 6’ 10”: amzn.to/33MrQYx
Lew’s Mach 2 Combo 7’ 1”: amzn.to/3nG0CL6
Lew’s Mach Crush Combo: amzn.to/30RORHM
Drop Shot/Ned Rig Setup:
Lew’s Drop Shot/Ned Rod 6’ 10”: amzn.to/33MqQUh
Reel Shimano Stradic Ci4+: amzn.to/3lAighK
Disclaimer: I am not a professional fabricator or builder. Modify your boat at your own risk.
#jonboattobassboat #jonboatconversion #bassbrothersfishingdmv
This suggestion is coming from an aerospace engineer. In my line of work people's lives are at stake which is not the case here. In aircraft and aircraft engines sharp inside corners are avoided at all cost since they concentrate stresses and are thus prone to promote fatigue cracking. I suggest you drill 4 holes at the corners as large as possible, but still allowing the frame of your hatch to fit.
Thanks for posting this excellent video and others documenting your Jon Boat mods.
I have a G3 Jon Boat and converted the live well (center seat) to a battery compartment including a cam lock to keep the honest people honest. This required buck riveting an aluminum plate (with 3M adhesive sealant) to the bottom of the boat to seal off the stand pipe hole in the hull. Installed the biggest marine AGM battery (Optima) I could find and a Noco charger. I worked for Honda so I got a good deal on a 20 HP BF20 outboard along with a mid-grade trolling motor. Added a "Bullnose" rudder attachment (Amazon) to the shaft of the trolling motor and highly recommend it. I use the trolling motor when maneuvering around the dock and the rudder/trolling motor combination allows for very controlled maneuvering at slow speed, especially when coasting. Moved the fuel tank forward of the center seat to counterbalance the heavy weight of the outboard, trolling motor and captain. Routed the extended fuel hose in the side channel of the hull inside split loom for avoidance of abrasion/sharp edge damage to the rubber. Always safety first. Keep up the good work.
Not gonna lie after I saw the foamed removed I was thinking that you do everything so clean I wouldn't be surprised if you painted it to match inside the seat hatch. Nice work and I'm loving this build. Plan on doing something very similar! Thanks for all the info and tips
Hi - really enjoy your channel. I am local too and fish Rocky and Tridelphia mostly - your videos on the 1448 conversion were awesome and I am thinking of upgrading/redoing my boat. Question on the epropulsion 6.0 - how fast can you get it up too? I am running a 55lb thrust on back and have a front trolling as well - I max out at about 3.5 - so looking to upgrade speed and considering all the electric options - my boat is just under -16ft slight v-hull and prob heavier than yours - any feedback appreciated but kinda thinking the 20hp Elco - thx so much and maybe see you out at Rock sometime
Hey. I typically get an average of 8mph and that's on a flat bottom bost which are typically slower than a V or Mod V boat. The batteries are Lithium but to power these motors those batteries are very heavy. I haven't been out to rocky since the levels dropped but hoping to for the fall season. If you see us say hi.
Awesome video! Your channel seems really cool!! Just subbed too!👍
Thanks and welcome to our channel.
I didn’t have all the tools you had when I did a similar thing. You always make things look professional. Great job! Tight lines
Thanks D!!!
Good stuff, thanks for sharing. You're giving me inspiration for a future project! 👍
Awesome man. Thats why I post these vids. 🤙🏾👍🏾
"If you're doing it, you might as well do it right." Words to live by. Thanks Naeem!
Ha ha. I try.
@@BassBrothersFishingDMV Seriously, like I've mentioned in the past, your work is always detailed, well thought out and spot on. I used a lot of your ideas when I re-wired, remodeled and updated my river rig last winter
Great video! Couldn't find any videos after this one on the 1436. Really wanted to see everything you did.
Thanks. I'll be posting more on this build soon
Thanks. I'll b looking forward to seeing it. I have a Lowe 1436 that was given to me. Appreciate all ur knowledge.
What are the pool noodles on the edges for
To prevent you from scuffing up the gunnel rails during the build out.
Good stuff as always Cuz!!🙌🏾
Thanks Cuzzo
Nice saludos fron puerto rico😂
Thanks.
Looking good
Thanks 👍🏾