Can you detail exactly what parts are needed to install the passenger seat (brackets, screws, nuts, etc.)? I don't think my kit came with all the parts necessary and I'm having a hard time finding somewhere that lists exactly what I would need.
Hello, sorry this video was shot several years ago and we do not recall all the part numbers that came with packaging. All these parts were Yamaha parts. The video explains which hardware comes with the seat kit and which hardware is stock/reused. Take notes of what you think you are missing and contact the place where you purchased the passenger seat.
Sorry we do not have the kit available so we cannot say for sure. Maybe try removing the bolt you have and measuring it or taking it to the hardware store to find a match.
Probably a very dumb question but what are the name of the two screws to install the passenger pegs. I bought a set of passenger pegs like that which no two screws to install on the bike.
Hello, if you are referring to the hardware to secure the passenger peg mounts to the motorcycle frame, just ask your local motorcycle shop for passenger peg mounting bolts (for your specific year/make/model). If you are referring to the hardware that secures the passenger pegs to the mounts, you'll need a cotter pin bolt/clevis pin bolt and the cotter pin or clevis pin.
Hey there Josh. The turn signal was not removed from the frame rail. It is attached from the backside. We just utilized Matt's extra hands and he held it while the other brackets were installed. If by chance you wanted to remove or relocate the turn signals, you would trace the wires forward... unplug them at the factory connector, pull them through the frame and then undo the retaining nut on the backside of the turn signal stalk. The nut will slide over the wires and the wires will slip out of the mounting hole when the turn signal stalk is removed from the frame rail. Hope that paints a good enough picture. Thanks for watching! - Kyle & the Chap Moto Team
how did you get the passenger pegs to fit?? I got the kit for just the pegs, and they're yamaha parts, but the holes for the bracket and pegs dont match, and get even worse with the washers... only thing I can think of doing is hacking away at the rubber of the pegs.
+Tom Meixner hey Tom, is it that they don't quite line up? Try pushing the end of the peg towards the bike--it might take a bit of effort. Basically you need the need of the washer to help smoosh the rubber part of the peg to line up the holes.
+Chaparral Motorsports oh, alright, have never installed pegs before on a bike before. any tips to get the needed pressure to get the holes to line up? thanks!
Hey Harry, sorry just saw your message. Is it #26 in this diagram? You can get the part number and order from our customer service department by calling (800) 841-2960. Hope that helps
Just bought r-spec Bolt and subscribed and look forward to more tutorials.Thank you
Thanks for watching!
I'm needing to know who to purchase the items from. I just purchased a sissy bar and I am afraid it isn't going to have the mounting bolts
Just what I was looking for. Great!
Can you detail exactly what parts are needed to install the passenger seat (brackets, screws, nuts, etc.)? I don't think my kit came with all the parts necessary and I'm having a hard time finding somewhere that lists exactly what I would need.
Hello, sorry this video was shot several years ago and we do not recall all the part numbers that came with packaging. All these parts were Yamaha parts. The video explains which hardware comes with the seat kit and which hardware is stock/reused. Take notes of what you think you are missing and contact the place where you purchased the passenger seat.
Matt is the mvp of this video
Ride on.
What size of bolts are the ones holding the sissy bar ? I lost mine and I don’t what size are they.
Sorry not sure. It's been several years since we filmed this.
Cool. Is available a thicker serial passenger seat pad for more comfort? I didn`t find that.
I don't think one is offered from Yamaha, maybe the aftermarket has one that is thicker and will work.
What are the fender bolt size that come in the kit? One of my fender bolt holding the sissy bar bracket fell off during my road trip.
Sorry we do not have the kit available so we cannot say for sure. Maybe try removing the bolt you have and measuring it or taking it to the hardware store to find a match.
Probably a very dumb question but what are the name of the two screws to install the passenger pegs. I bought a set of passenger pegs like that which no two screws to install on the bike.
Hello, if you are referring to the hardware to secure the passenger peg mounts to the motorcycle frame, just ask your local motorcycle shop for passenger peg mounting bolts (for your specific year/make/model). If you are referring to the hardware that secures the passenger pegs to the mounts, you'll need a cotter pin bolt/clevis pin bolt and the cotter pin or clevis pin.
whats the size of the bolt of the sissy bar? thank you
Sorry not sure--it's been too long since we recorded this.
Is there a place that i can buy just the mounting brackets for the seat i already have the seat but no brackets
I got the 2023 yamaha bolt r spec what is the i need this kit what is the kit number
Hello, Yamaha is showing it as Not Currently Available. Sorry.
Great video thank you for posting
Thank you for watching Dan! - Kyle & the Chap Moto Team
Do you have to detach anything with the rear turning signal lights? Or just have someone hold it temporarily?
Hey there Josh. The turn signal was not removed from the frame rail. It is attached from the backside. We just utilized Matt's extra hands and he held it while the other brackets were installed. If by chance you wanted to remove or relocate the turn signals, you would trace the wires forward... unplug them at the factory connector, pull them through the frame and then undo the retaining nut on the backside of the turn signal stalk. The nut will slide over the wires and the wires will slip out of the mounting hole when the turn signal stalk is removed from the frame rail. Hope that paints a good enough picture. Thanks for watching! - Kyle & the Chap Moto Team
Hey buddy.
I have a 2024 yamaha bolt and i was wondering where can i buy the passenger seat and foot pegs besides the dealer.
Sorry not sure. The dealer is your best option.
Great video, Thanks a ton!
Yes Sir! Thank you for watching Sid!
how did you get the passenger pegs to fit?? I got the kit for just the pegs, and they're yamaha parts, but the holes for the bracket and pegs dont match, and get even worse with the washers... only thing I can think of doing is hacking away at the rubber of the pegs.
+Tom Meixner hey Tom, is it that they don't quite line up? Try pushing the end of the peg towards the bike--it might take a bit of effort. Basically you need the need of the washer to help smoosh the rubber part of the peg to line up the holes.
I can try that, wouldnt that make the pivot from up to down really hard, though?
+Tom Meixner no. It's that tension that helps keep the peg from flopping around as you ride.
+Chaparral Motorsports oh, alright, have never installed pegs before on a bike before. any tips to get the needed pressure to get the holes to line up? thanks!
How do you hook up the mini fairing?
Thanks for watching Ismael. This Video link th-cam.com/video/3f01g48FbRo/w-d-xo.html features the fairing. -- Kyle & the Chap Moto Team
I'm worried the bolts above the rear wheel, with a passenger on board may rub? i've cut off a little bit but with enough weight , they'd hit?
bolts in the kit were particularly long
That is strange. Or kit didn't seem to be excessive.
@@chaparralmotorsports what size should the bolt be?
I have question... is there difference between Yamaha bolt and bolt r spec on passenger seat ?
Great question. We will need to look at the mcirofiche part numbers to verify.
Im thinking of 2" fork extensions for mine.So far theres only one company that makes em.
What size bolt to screw in foot peg mount
Hello, you should be using the stock bolt.
@@chaparralmotorsports I bought mount and pegs separate but it didn’t come with bolts to screw into frame, so I don’t know what bolts to use
Why are the fender covers so difficult to get lined back up? I found the M10 bolts especially hard to get back in.
CJ Bonnier btw thanks for doing these videos guys, super helpful.
What size are those washers and do you sell them? Thank you.
Hello, sorry it's been so long I do not recall the size. I think they came with the kit.
@@chaparralmotorsports thank you for the reply!
Unreal thanks for posting helps me so much
Scott Fraser No problem!
What rear fender is good for a 2014 Yamaha bolt if i want to add a passenger seat ??
Hi, not sure what you are asking? The stock rear fender is totally suitable for a passenger seat.
@@chaparralmotorsports sorry is that when i bought my bike it was modded and had the rear fender removed
Hey bud I lost the screws that attached the foot peg mount bracket to the frame. Please help.
Hey Harry, sorry just saw your message. Is it #26 in this diagram? You can get the part number and order from our customer service department by calling (800) 841-2960. Hope that helps
Gracias me ayudó demasiado!
+Alejandroxmas De nada :)
Where can I find the passengers pegs with all the bolts
Hi Mark, here you go: www.chaparral-racing.com/product/yamaha-passenger-seat-kit/1tp-f47e0-s0-00.aspx#2015_-_YAMAHA_-_BOLT
I just need the bolts for the pegs. What size do I need to buy? I don't want to buy the whole kit, just need the bolts.
The bracket bolts
Is this the tall or short sissy bar?
+Andy Nguyen We used the tall sissy bar www.chaparral-racing.com/product/yamaha-tall-sissy-bar/1tp-f16c0-v0-00.aspx
I’m having trouble finding the sissy bar online. I have the passenger seat already installed, but can’t seem to find the backrest kit to purchase.
They are no longer... Good luck in your search.