Inside a mechanic's test probe - with schematic
ฝัง
- เผยแพร่เมื่อ 12 เม.ย. 2023
- A very simple, but extremely useful 6-24V test probe that can detect polarity and force energise circuitry in either polarity with the press of a button. It's basically a logic probe for cars and trucks.
The circuitry is refreshingly simple, with just one oddity. It turns out that the original this was probably based off does just have the resistors and LEDs as I described. I wonder where the extra components crept in.
This test probe is widely available on eBay. Target price is around 20.
If you enjoy these videos you can help support the channel with a dollar for coffee, cookies and random gadgets for disassembly at:- www.bigclive.com/coffee.htm
This also keeps the channel independent of TH-cam's algorithm quirks, allowing it to be a bit more dangerous and naughty.
#ElectronicsCreators - วิทยาศาสตร์และเทคโนโลยี
As an ex mechanic of 25 years that specialised in auto electrical I love these teardowns of stuff I just took for granted. Thanks Clive!
I work in R&D for auto electrical trainers. It's always super cool to get inside of all of it and see how it ticks!
As a qualified vehicle electrician I would never use anything like such.
NOTHING is better than a quality Digital Volt Meter.
Guess artists use a power probe.
Pud will know when he probed a Volvo at Sound City in Worthing and he chewed airbag.
Could have killed him and nearly killed me with laughter.
Best result ever, couldn't have happened to a nicer person.
Btw Pud will know who I mean exactly won't you Pud ?
Don't use this shyte, use a quality DVM and learn how to use it
Thanks Sr. Clive.
The Switch is the weak point of these Power probes, Especially with high Current. The Switch is not designed to 'Switch" High loads. To save the switch Press the button BEFORE touching the tip to the Load under test.
The contact points in the Switch will hold High current once connected together before the load is applied.
The Arcing of the contacts is what kills them. They are a light duty Switch..
Mike M.
The brand name version of this came out in the early 90's. It was called a Power Probe and everyone loved them because you could quickly provide power or ground to relays without diagnosing the circuit fault.
Basically you quickly know if the fault is before or after the relay, fuse, or whatever.
Still to this day it is a must have tool that scores a 10 for most used tools and value.
Now I want to take mine apart to see if it is the same.
Found one for £80 lol
They have had many modern version of the power probe! Their downfall is the amount of delicate computers in vehicles that you can damage using a tool like this.
@@JohnnyBouldin I have a degree in Automotive and Diesel Technology as well as Ford, Delco, and Daimler Chrysler factory training. This helps to know what not to ZAP with the inappropriate lightning source.
Like my 55 Studebaker President Speedster which is 6V positive ground for example.
@@kevinsellsit5584 Wait, what? I thought all post war Studebakers were negative ground.
Thought about taking my Power Probe 3 apart and comparing it too, lol! But chances are as soon as i open it, I'll need it again
You did it again, Clive. You put me to sleep! I don’t mean to say your video was boring, not at all. It’s that damn, soothing voice of yours! I’ve had a really long day and sat down to watch your video after work. It’s only 1900 here and I had no intention of drifting off. I managed to regain consciousness and backed up the video. Yet another good one!
Welcome to the club. 😴
@@Frankhe78 and I bet Clive could be great at ASMR :)
I have actually looked up his longer videos...usually the building things type...and they work so well :)
It's when you wake up and he's still talking you know oyuve gone too far 😅
I frequently fall asleep to TH-cam vids, especially machining vids, I watch a lot of TH-cam (retired and 64 yo male) and nowadays hardly any TV. To many commercials on TV.
we had a brand name version of that at the shop i worked at during my apprenticeship. one very neat additional feature that one had, compared to what you showed here, was that in addition to lighting different colors depending on the polarity it would also emit one of two distinct buzzer patterns. very handy when poking around in cramped spaces or when you have already stretched your arm an additional 3cm because the thing to be poked is at the very back of some cavity and checking the LED is not really an option.
as others have noted: despite its simplicity its an incredibly useful tool for quickly zoning in on the source of an electrical issue
I used to work with vintage and historic vehicles and I was always the workshop "go-to guy" for auto electrical stuff. I had one of these from a branded supplier, can't think of the name now but it wasn't cheap.
I ended up being off work because of a spinal cord injury and loads of my tools went walkabouts, this being one of them.
I might buy one of these cheapies to replace it as I still do work on my own cars at home as and when I can. Keeps me marginally sane... ish.
The most intriguing part for me was the rectifier. I never ever thought of putting dc through the ac input of a rectifier. How utterly ingenious. I suppose it just shows that I never paid attention in college.
If you like the use of the rectifier, it is worth looking up Clive's video on a galvanic isolator for marine use.
Some devices employ rectifiers on their DC power inputs in designs where the plug can go in either way round. It's a neat idea isn't it?
As far as the positive- negative detection, I learned about 35 yrs ago how to make one that is super simple and works great. The leads from the battery are connected to 2 - 360 ohm resistors, the other leads of the resistors are connected together and connected to one leg of a bi-color led the other leg of the led goes to the probe. Connect the battery lead’s, current will flow through the resistors connected in series and when you touch the probe to ground/negative the led will light green, touch positive the led will light red, if the led is in circuit properly. Has been an extremely handy bit of test equipment over the many years. I first saw one offered to mechanics by Mazda in the mid 80’s, then with in a year Volkswagen instructor gave us the plans for building they out of multimeter test leads. Hope I explained it well enough. Thank you BigClive for all teaching skills you have been of great service to all of us.
I like the one that Eric O (South Maine Auto) uses as it beeps different tones depending on whether it's a positive or negative voltage, so you don't need to take your eyes off what you are testing to look at the probe LED!
I love this simple test tool! I started as a auto electrician. Did some armature winding. Then became a electrician doing industrial switch gear panels. And later electronics. But my love was always electronics.
Thank you, Clive. I was just working on electrical on my 6v vehicle yesterday and lamenting that I couldn't use my Power Probe. I started watching the video with an eye for what it would take to make this run in 6v. Then I read your description and searched for the product and sure enough, no changes required! I think I'll pick one up and maybe do some conversions to use the PP accessories, which are quite nice with banana jacks.
I’ve sold hundreds of the name brand Power Probe versions of this. Never even knew there was a generic version or tore one apart. Very interesting!
I just got this same one. It's not awful. Nice to know exactly how it works. Thanks, Clive.
I wonder if maybe the extra diodes and resistors are there from another incarnation of this tester where filament bulbs were used in place of LEDs as the indicators for positive and negative.
The diodes are there for protection because the peak inverse (reverse bias) voltage of a typical LED (referring to standard 5mm and 3mm LEDs) is only about 5 volts the battery supply is well above that.
If you exceed the PIV the LED will short circuit vaporize the bond wire from the excessive current and then go open circuit.
@@Bushougoma True, however the reverse parallel LED will limit the voltage to that of the forward drop (2-3v) so the "protection" is over the top - as in, it would only be protecting stuff if an LED failed... which is pointless as you need them all working in the module anyway...
Would have come in handy many years ago. Love the simplicity.
They have had these for many years, I have been using one for at least 20, and it wasn’t a new concept at the time.
Exceedingly useful. I wouldn't really do much on 12v systems without one of these to hand. Although unusually for me I have never put much thought into the innards of one other than the occasional reattachment of power/ground leads
Where the leads are too short to reach the other end of a vehicle (BMW with rear mounted batteries spring to mind) I just take power from elsewhere, eg switch a tail light on and find a way of attaching the power lead to it. Least I used to. I have since cut off the clips, added a connector and created all sorts of adapters, bulb, lighter plug, smaller croc clips, even simple spade connectors to plug into existing harness connectors as well as creating another 4m extentsion cable.
These have a drawback: they light up with very little current, so won't show you a bad connection (typically a bad ground)
Yeah, the old ones with a bulb used to be dim and gave a decent projection of this. Great for finding corroded wires.
Basically a logic probe for 12V systems. I made one of these years ago and it's proven itsely to be amazingly useful. Every car owner should have one of these
Said, "Every car owner should have one of these."
99% of the car owners would not know what to do with it.
I used one today to trace a fault on a Power Pallet Truck.
@Dog Walker used one today to check a solenoid on a Skid Steer. Now I need to find the shirt. "We kept blowing the 15 amp fuse, so we installed a 30 Amp to get it over here." Unfortunately, I don't find any melted wires to help me.
Have you met every car owner?... :'(
@@caddyguy5369 I would not trust a lot of car mechanics with anything electrical, including commercial vehicle mechanics.
I use to work on old cars (re wiring and repairing electrical) and I have a unit called a Power Probe (kind of expensive) but it's a bit like this, it does have a display though to show voltage and it has a physical breaker that pops and you reset to fix. They also have a 25' extension for it and yes I have it and used it as I worked on lots of motorhomes and this allows me to use it anywhere outside, inside and on top of them, also they make some of the best wire probes I have seen (similar to Fluke but made for 3 sizes of wire common in automotive) and they hole they make is so small it's like it self seals. Very handy devices indeed.
I always wanted to take mine apart to do this. It is an awesome tool. Thanks for the video Clive! I have been a mechanic since 1992 and my forte is electrical diagnostic. When these came out I was very excited. I had built myself one that helped but it wasn’t near as nice as the one I bought. Mine has a 20 amp breaker in it and I have shorted it many times and you just push the button back in. Also mine came with a cig lighter adapter and a long extension for it.
Got one of these in my tool box, very handy for diagnosing electrical faults in vehicles. Quickly solves many common problems.
I've been using 1 of these for over a year in my workshop , great tool , no problems with it .
This exact one is availible under the british Sealey Brand to. Very very useful tool.
Having this tool would have come in real handy for me last week. Wish I had known about it sooner. Very convenient to have a quick read for polarity or to supply current locally when trying to diagnose electrical issues. Might have to get me one.
Get one with a voltage readout at least, much more useful.
Look around for a "power probe". You will find the expensive ones and these cheaper units. I've got this same tester and it's very handy.
Thanks as always for a great Video. I try to make sure I have one of these type of PowerProbe type devices in any Vehicle I own, certainly one I'm doing a long trip in. I actually own 3, an orginal powerprobe 1 with no buzzer (black), the red ones had beepers on them. I got a orange Chinese one with volts, ohms display plus other functions
They have got me home many times from being broken down by hot wiring your own car, they are so useful.
Certainly the ones with a parallel body benifit from a small cable tie, so its slippable along the main body to hold the rocker switch down to free your hands.
I can attest that a genuine power probe has supplied power to my 12v coil and driven 20miles home after total ign switch failure on a vehicle, with the probe jammed unto the +VE contact of the coil and the positive rocker switch held down for 20miles with that slidable cable tie ( can slide to hold down negative if needed too)
They are the best thing to find bad earth's on vehicles......
Like you said just don't go poking around Vehicle ECUs with them or Can Bus wiring unless you know what you are doing.....
An indispensable tool for overland trips or get you home from deepest greenlaning in the hills!
Thanks again for the education of circuits over the years, better than electrical college, cheers
I agree Jonathan, I have my 1st gen Power Probe and couldn't live without it.
Many people dont realize that a full-bridge rectifier has usefulness with pure D.C., and not just A.C.
My favorite use for a full-bridge rectifier with D.C. is for use with a reversible D.C. motor. With the bridge connected up to the 2 the motor connections, you will get the same polarity output from the bridge no matter what the polarity to the motor is.
You can buy these branded as 'Power Probe' as used by Eric O and his ilk ... cost about US$165 :)
Power probes are different , Power probes tell you the voltage, they tell you if there is positive or negative present in the circuit and have a manual trip reset . You also can get a 5v adaptor for Power probe so it out puts 5v which is very handy.
I've got that exact tool. Comes in super handy doing electrical diagnostic work.
7:57 - "Be careful what you're probing."
Good advice that applies in many circumstances!
ive had a power probe III for around 3 years and a couple of months ago i finally managed to kill her just because the solder joints for the tip where weakened and i put too much of a load with a 24v circuit i was testing for a bus... this was single handedly one of the most valuable tools you can have for electric diagostics if used consiously, it allowed for quick and dirty testing while also doubling for a voltage tester since it did have a screen... this chinese one seems neat for the price but ill still gotta get me another power probe...
0:10 - It's not handy, Clive, it's BRILLIANT.
Reminds me of the test lamps we had in telecomms, which was 2 50v lamps in series across the supply cnetre tapped for the probe, both lamps glowed dimly when connected (useful to know you had a supply)
Having 2 led's in series would be a problem with matching current.
This is definitely something that Eric O. would use over on SMA.
So simple and no mystery chips on board...very kewl!
Eric O. do use these at SMA, but not this chinesium variant he instead uses a power probe branded one
Eric O does use one over at SMA! The brand name is Power Probe
I loved mine when I was wiring up my restoration project car from scratch. Although mine was slightly more complicated with a digital display/voltmeter. For some reason it didn't live very long though.
Nice vid! It is a so simple and powerful tool for electrical testing.
Just a bi colour led, 2 resistors , a two way pushbutton and some wire
You got me again Clive. Just woke up, with coffee in hand . Read the thumbnail title and my dyslexia got the better of me. I read 'Vieicle test probe' as 'Testicle Probe'. Nearly spat me coffee out!
I like these teardowns! I didn't see it mentioned but for the probe tip, I think it slides out because on the name brand PowerProbe, you can either replace the tip or plug in accessories like an alligator clip cord or a 12v-to-5v reducer. I wonder how this clone would act with those accessories.
I have this exact probe, and it doesn't accept accessories. Mine however I have modified to a 4mm socket so it will take any item you wish to plug in, including the probe. It would be useful if the tone would work as you described as in the original powerprobe, maybe Clive could suggest a mod.😉
I really appreciate your content thanks
There IS current limiting on that flying black clip... The wire will turn into a fuse in short order if you connect it to positive ;)
We call that thermal protection.
Us mechanics call that thermal protection
Useful video, thanks
Inductive loads wouldn't be an issue since you only get a high voltage spike across the mechanical switch, and there is nothing vulnerable across it.
And yeah I dont see any point in having the extra diodes and 200 ohm resistors either. Some people mentioned reverse voltage across the LEDs but the forward-biassed LED will always clamp the voltage below the reverse conduction voltage of the other LED - especially if the 200 ohm resistors weren't there. But even if there was enough reverse voltage, the current would still be limited by the 1k resistors and probably not damage the LEDs.
I have one exactly like that, it is very useful for probing/testing stuff on bikes and cars 😁
Love these things. Really good for electronics repair business. They should design them a to be a bit safer with lower current settings and a lower 5V output setting.
I've made something similar for industrial sensor testing and setting for 24v. Ive put 15v zener diode to make leds off. So you get a string of led resistor zener zener led resistor. Ends to power and sens to center of string
Nice review video
Got the same one had it for years to me a ex auto-electrician used to power up the distribution boards I used to design and build for ambulances and police cars for the blues siren interior lighting and video equipment. I could power up the separate circuits and check the out as my boards also covered the batteries management system but you stayed away from sensitive circuits
I have the brand name Power Probe of this with a voltage display, very very handy tool!
A knock off of a tool I have used for two decades as an automobile technician, the "Power Probe". A very handy tool.
i love my brand version of this! mine came with an extension lead that'd reach the back of semi trailers. nice to know i can get a MUCH cheaper replacement. BUT the name brand has a lcd display for voltage + or-- and the beeper can be used for sensed power for having to not look at the display
That extension could be useful. I use a couple long wires if I need to at the moment.
I already know what is inside my probe, Clive. Thanks.
Awww...come on Clive, read the instructions. That's the best part.😀
Good afternoon Clive, sending you love from the other side of the planet. 😊
Would be nice if they had included a high load switch so you could pull the 12Vs down with 1A or so. I stopped using a dmm to fault find on my cars and now use a lamp on flying leads. I find the most common faults are connectors going high impedance, so will still show up as a good connection with a low current like a dmm or led but can't light a lamp. Old 5w tail section from a stop/tail bulb gives it a second lease of life if the stop filament has gone.
Are you saying a DMM on a resistance range can't correctly measure the resistance of a connection ?
@@deang5622 when faulting on a car it's not always possible to measure the resistance through a connector. even measuring the resistance can give a false idea of the state of the contacts, as we are normally taking of high currents of 1A or more. i still like to load the circuit with the kind of current it should be seeing this really helps finding the doggy connections or breaks in the wiring. I chased a fault on my radiator fan for ages with the DMM as you can't get to the connections when the fan is plugged in, and the DMM said that there was 12V on the unplugged connector. the man from the AA just connected a 12V inspection lamp on the connector! it flashed and went out. with the lamp he found the fault in about 5 mins and got me back on the road. i thought i was being cleaver by using the DMM 😞
yep I said that🙂
@@TheEmbeddedHobbyist I agree with what you say. But the resistance measurement , if it can be carried out, can give you a good indication of the state of the contact. You just need to know what figure represents a good contact between the connectors and what represents a bad figure.
It's nothing to do with the current. You can push 10 mA or 1 amp it doesn't make any difference. The resistance remains the same. The resistance isn't a function of the current. What could potentially happen, if the contact is current a high current then that leads to heating of the conductor and contact and most metals have a positive temperature coefficient of resistance, meaning that as the conductor warms up its resistance can increase.
Knowing the resistance having measured it with a DMM, you should them be able to calculate the voltage across that cable and connector by knowing what current is normally drawn.
If the voltage drop is too much, then the device being powered isn't going to have a high enough potential difference across it to enable it to function.
So, resistance, if you are able to measure it can tell you a lot.
In fact, I know of data communications networks covering large geographic regions where measuring the resistance of cables on an annual basis is performed to monitor the performance of the cable and connectors and decide when to replace the cable.
All of that resistance data is captured and stored in a database and charts produced over the years showing the trend in the resistance measurements.
And technically it's not impedance here, it's resistance.
Impedance is a combination of reactance and resistance and is represented by a complex number. A complex number comprises real and imaginary parts.
The complex number contains magnitude and phase.
We are talking steady state DC here in 12 volt car electrical systems, so it's resistance only - the real part of the complex number. There is no imaginary part. Hence the magnitude of the complex number is present only and there is no phase angle.
So it's resistance rather than impedance.
If there was an imaginary part present then it would be impedance.
I will guess that the resistors and diodes are insurance against overvolting the LEDs in normal use with 13.6V supply when the alternator is running, charging the battery.
The inductor case you describe would probably kill one or both LEDs with or without the resistors and diodes.
Professional test probes use a buzzer to indicate power and ground.
They use a different tone for Ground or Power.
This is very useful
In automotive videos here on TH-cam I've often heard these things referred to as a Power Probe I'm not sure if this is the correct name for it but I've heard it enough that I think it's the generic name for this particular tool or so it seems!
I'm like to be able to come up with a design for someone like this that's not specifically for 12 volts though for troubleshooting low-voltage systems even with maybe integrated continuity tester and more and also just the capability of having a single test lead connection to allowed to determine whether the probe would be positive or negative possibly to LEDs on for AC for trouble shooting things more for electronic devices then Automotive.
I envisioned something that would look almost like a logic probe except have a similar function to this type of tool that featured in the video!
Also I have a lot of those Harbor bright test light kits I've modified for various things it makes a good housing for a one-off😮 piece of toast gear.
One essentially is just a red and green LED and a suitable value resistor just to indicate polarity others I've got lower voltage bulbs is that original just so can use this for testing Marshall are voltages even than 6 volts.
I should found out the continuity tester of theirs is also great for verifying do you miniature low-voltage bulbs that I use quite frequently even though it's only one double A battery is enough to like them and if there's a short that leads going to them or any of the wiring the continuity tester we'll come on fully and indicated there's an issue.
I build all kinds of models and also help others with model railroad stuff as well not to mention do a lot of stuff custom when it comes to being an adult fan of Lego and no not always a purist but at times do strive to be it depends on what I'm going for and the project at hand technically even in some of the stuff at the Waco parks and more not all this is hundred percent Lego for example there is Metal Frames non Lego electrical in some cases even pneumatics so kind of throws the entirely like nothing out the window anyways so it just depends on how you feel about doing things when you do something outside the box anything's fair game.
Then again everything has been or will be open-source eventually for this as well heck they even have a connector that's designed for other then their own accessories on one of the sensors for the powered up system if you know about it It's actually an industry-standard connector for sensors and so on which is totally awesome and if you look online you can actually find connectors that fit all there systems even newest as well as possible to modify other connectors to fit so it's just easier nowadays it's like there are more encouraging people to go outside the box and they used to it's kind of opposite of what it used to be however only reason they did not you stared Toco connectors on the Mindstorm systems that use the telephone like connection essentially it's the dec plug but the tab is on the opposite side it was a toy safety thing so basically you cannot plug something into somebody that might have higher voltages present and yes or why those clones and third-party things especially from China actually use standard Telephone Connections
I actually own one of these! Recently used it for testing trailer lights and connectors.
The issue measuring device used by all Exchange engineers on selector switches was a test lamp. It plugged into the rack battery jack and had a three spring switch to reverse polarity of the probe. They were useless. Most of us would fix a lamp holder to either side of a sharpened piece of power bus. Used as the probe and the outer legs of the lamps were connected to +&- of a 50v power cable that plugged into the rack. We had some eddison style carbon loop filaments which glowed gently so you could stare at them while you tested connectîns..
So you had a common probe with 50v on the outside. So the two lamps glowed at the same intensity as you probed round the switch if you touched earth one lamp glowed. 50v and the other lamp glowed brighter.
With a bit of practice you could measure the resistance of relay coils and resistors and know if it was right or not. Noisy contacts would flicker. They were far more use than a meter or the single bulb testlamps.
Now they have a diagnostic rig that tells someone 50 miles away what is faulty and a taxi driver will drop the part in the doorway ready for the poor bugger who drives 100 miles to plug the card in..
Another nice video. Thanks.
Just a sidenote for our American viewers. 4 meters length of the test leads corresponds to roughly 18.4 bananas.
I have one that has a little tiny lcd display and can be a small oscilloscope for reading low voltage sensor output
I have one of these with built in dmm, interesting how high voltage it can be used on, cause locos run 32v.
Clive.. I believe the diodes and resistors are to ensure the LED's dont give a false positive if accidentally touched onto a 5v circuit. Do you believe the volt drop across the Diode combined with the 200 Ohm in series could be enough to stop ghosting of the LED in such 5v cases?
That doesn't seem nearly enough to me.
nope, in this case you just use zener diodes in series to the led (2V for the 5V indication and 8V for the 12V indicator) there are similar Tools that do this, to destinguish the voltage aswell
9:04 The two 1 K resistors provide circuit loading to prevent stray voltage from tripping the LEDs. This is a real problem when using a digital volt meter. Fluke even makes a stray voltage eliminator ( SV225 ) for DVMs.
Good thought about 5v ghosting prevention... I've talked myself to your line of thinking... Notice that the LEDs are not connected to the rails, but to a voltage divider so they will see at most +/- 6ish volts. If the probe hit a +5v rail you would have negative 1ish volts across the LEDs which could glow the green one - but with the extra 0.6ish volt drop of the added diode it doesn't misidentify +5v as GND.
In the real world though, your battery is usually closer to 13.6v than 12v IIRC so this theory might work best on paper and in reality the extra diodes are probably for reverse voltage breakdown reasons (protects the LEDs from being damaged by too high of a reverse voltage... But IDK about the need for that here either)
Now I have no explanation for the 200 ohm resistors... Other than as a manufacturing option to match apparent brightness between the LEDs and this example of the product cheaped out and cut one item from the BOM.
Seems to me that the reverse voltage limit of many LED's is quite low. I would have added the regular diodes as well although I'd gave to think about the need for the dropping resistors. 🤔
Temu has a similar device that has an LED voltage display on the side and a red or green led to show polarity. It has a simple wire piercing point and a negative earth clamp. It sold for around $4.50 USD for it.
What is it called?
I've never been a fan of the LED probes for diagnostics on vehicles. Either i would use a multimeter or some kinda load (usually a 5w bulb) for testing, depending on the expected outcome.
Diode probes tend to show false positives, when testing a high Q output.
Very good timing as this warm spell has us mechanic wannabes out in force.
yes, i'm sure the led circuit could be simplified, i think 7amp is a bit high for that ptc/polyfuse, i'd have thought that sort of current could melt the pcb tracks,, maybe a 2 to 4 amp,
I just have the standard test lamp probe nothing fancy like that lol thanks Clive
Thanks Clive 👍🇮🇪
Power Probe and knockoffs of it can cause problems when used wrong, used on 5v circuit, and more. Starter motors draws 120+ amps and Solenoids on the starter draws 30 to 40 amps and likely won't spin/activate with that "Breaker" or just burn up the tool. Other Motors & Coils can see a "dead short" to ground tested this way too. Many car relays have EMF diodes on the coils but not all so you need to watch polarity when test out of circuit or the Diode smokes.
Eager to see at which point we're going to get a video that is both about carbonated beverages AND electronics. Perhaps see if carbonated beverages can undergo electrolysis. Now that would be interesting. What kind of gas/chemicals can be obtained by doing such experiments.
The early power probe this thing was handy af
I have a more advanced model that has a screen to show the voltage, and can also function as a multimeter. (Autel ps100) Very useful for troubleshooting basic vehicle electrical issues.
The led set up is a automotive logic probe if you remove the diodes.
Considering the size of your hands Clive, that probe is huge.
Think I may still have my old 12v lamp in the handle, ever shortening earth lead tester.
;)
Clive did you check at what current its internal protection trips? I hope is way less than the usuals automobile type fuse.
Clive, would it be possible to modify to a potentiometer so you can adjust the output power for testing lower voltage systems/items. Would be interesting to know if it could be done as it would be very useful. Thanks
I just got one of these, fixed my Triumph Tiger by poking at relays until I found the dud. Mine was slightly better with a screen though. Shows voltage, resistance etc.
Nice, no unwanted complexity!
12:35 I always cut the battery clamps off about 10 cm from the end and crimp spade terminals onto them. Makes it mega easy to lenghten/shorten the wires. And makes it easy to hook up more stuff too, using daisy chain spade terminals.
I love spade terminals. I just always need to pay attention to polarity, and risk assess what’s going to happen if I yank on it and pull it out. You don’t want a male spade terminal hanging out with unfused positive voltage, for example. Also, they don’t handle high current over time if they’re being unplugged repeadetly. I’ve learned this the hard way😂
The more expensive versions have that feature built in.
Why don’t you use a deutsch plug instead, can carry more current and you aren’t leaving bare connections dangling, plus they can take being disconnected a lot more and have better ingress protection?
@@rsoul7282 because spade terminals end up being multiple orders of magnitude cheaper and plug right into relays and other equipment. Much better for the prototyping I do
I could also just use wagos but then I’d have to put wagos on every relay pigtail wire, and the strands don’t last when inserted into wagos multiple times, unless you use ferrules. But at that point I could just use spade terminals anyway since I’d need a crimper handy anyway. The more time I can save the better
@@jhsevs ok, I was only going off you saying wanted to lengthen and shorten your leads, was only offering an alternative. I wouldn’t consider deutsch plugs as being particularly expensive, that being said I don’t know what you have to pay for them, and spade terminals are definitely less expensive. You could also quite easily make jumper wires to suit your needs if required if going the deutsch option though. Regardless, I’m only making a suggestion, if what you are doing works for you, keep doing it, and best wishes to you good sir 👍
I have a home made thing in my toolbox with a red/green LED and two resistors. It works just fine so I agree, the extra two resistors and diodes are not needed...
the diodes might be there for a little reliability. if one of the leds go open or shortcircuit, the other may be saved and keep indication by means of a the auxiliary diodes
Since the 13.2VDC is divided in half by the two 1k resistors, the probe's voltage to negative is 6.6V minus the 0.7V diode drop, minus the small voltage across the 200 ohm, minus the forward voltage of the LED. From probe to positive the polarity would be reversed and slightly different due to the color of the LED. So it looks like the voltage to anything you test would be less than 5V as long as you *never* press the switch.
It seems to me that the two 'current steering' diodes and two 200 ohm resistors add some voltage drop to prevent the probe voltage from going above 5V.
The switch is what could do the damage. I think I would put a 22 ohm 10 Watt power resistor in series with the probe tip so the current could never go above 0.63 amp, which should be enough current to light up almost all lights in a car. That would also make the PTC, etc. unnecessary.
That small black wire and clip look like they may get in the way and be troublesome. Tape it out of the way, to the big cord with some black electrical tape.
Thanks, Clive for the teardown of what seems to be a unique torture instrument. 🤣🤣
Filament headlamp circuits draw about 8 amps .. with the 7 amp PTC they still flash on briefly.. I have a version of this and surprised a car owner while testing their tail lamp bulbs as the headlamps flashed ..
For diagnosing low current stuff sure that would work but people often use the power probe to test things like fuel pump or starter which need a lot more current.
The resistors and LEDs are just a fancy logic probe for CMOS. 😌
This video left me rectified, +1
If you poke wires get liquid electrical tape and put some on, that can cause issues with corrosion in certain climates, etc. One tip I’ve gotten from watching channels on TH-cam of professional mechanics.
Would be good to see some modifications to this as the other people have mentioned 😁
6:47 - If Clive ever becomes a character in Mortal Kombat, his fatality one-liner should be: "Get wrecktified!"
One even even simpler yet you don't even need the other two diodes. just need the two LEDs and two resistors. The LEDs are connected the same way with the probe in the middle but the other side of the LEDs get there own forward voltage resistor depending if you're doing 5 volt or 12 volt. Each LED leg one is connected to the positive one is connected to negative and your probe in the middle deciphers what LED will light up if your touching positive or negative.
The reason being, the person that designed this circuit did not know what they were doing. If you like to use a different resistor for each LED, for instance to compensate for equal brightness, then both LED's should be in parallel. The diode - resistor combination can load the "bipolar LED" with a different resistance, depending on polarity. But both resistors are 200 ohm making the whole thing completely redundant. Knock it off the board.
Indeed. Keeping it simple :). Just use a bi-directional LED, no additional resistors and diodes as the 1k resistors already do the current limiting.
I'd say the extra diodes are necessary because like you said while probing solenoids the reverse spike will kill the LEDs eventually. If you look inside LED tail lights or side lights they always have a power diode in series. I think it's just standard practice to include them
I suspect the extra diodes are because the designer doesn’t trust the longevity of the LED’s when reverse biased. Nice to see them drop a cent on belt and braces rather than go extreme minimalist
These are also a fantastic way for apprentice level mechanics (or those who just start poking at circuits without any care) to blow up expensive electronics on cars. My previous job had me working as the shop f-up fixer, fixing the issues that other mechanics installed in customer’s cars. I can’t even remember how many times other mechanics took their fancy PowerProbes ( or knockoffs), applied power to a low current ground circuit (or vice versa) and released the magic smoke from an expensive magic box.
Regarding the weird diode/resistor/LED setup…this is outside of my pay grade, but a lot of automotive stuff is designed to work across a wide range of voltages. Typically from 9V to 24V (most heavy duty equipment or OTR trucks are 24V). Is it possible the added complexity is due to the wide voltage operating range?
Yeah, they are useful for testing basic things like lights, wiper motors and that sort of thing, but as you say, you don't want to be injecting 10amps into a ecu ground.
I have two of these, one with a 8m lead and I’d never be without one
Clamp to mass
Clamp to battery
Poking the probe into the test object
"BEEEEEP"
"Yes, it's a vehicle."
Could do with a 24v and 110v versions for working on railway rolling stock
Looks good, but I would prefer to see some fuses on the main power leads. As you pointed out, there is the possibility of probing a positive supply with the negative terminal so I would certainly want one on the negative side, and for completeness one on the positive side too.
We all love a bit firework from time to time.
One in the center switch position lead would do fine.
The negative side on most of the examples of this tool I have seen have been a covered alligator clip, with a sliding cable restraint, so unless you are negligent or don’t maintain the tool the risk is low. It also has a circuit breaker, so you should be fine.
@@rsoul7282 It is a specialised diagnostics tool used by specialists and not a regular component used by regular people. In order to do proper diagnostics you sometimes have to do half way dangerous things. Oops, I have blown the fuse. At least now I can find out which fuse it is an identify the circuit that has the issue. A process of structural elimination is still the best way to find faults.
@@Frankhe78 are you joking? These are readily available to anyone, thought it takes a modicum of knowledge to use one. Certainly not a tool for ‘specialists’. Besides, blowing a 12v fuse in the name of testing should be a last resort if you can’t get a resettable circuit breaker, and by no means is it dangerous, though I’m not sure what you are doing, so I won’t discount the possibility.
Clive,
I enjoy your analysis of reverse engineering. Can you show us how you take pictures and what software you use? Thanks!
He has done that. Look for the video with the Tupperware™ camera.
9:04 The two 1 K resistors provide circuit loading to prevent stray voltage from tripping the LEDs. This is a real problem when using a digital volt meter. Fluke even makes a stray voltage eliminator ( SV225 ) for DVMs.
Is that a resistor and does it cost $50?
I own this very probe, so I'm very interested to see what you have to say about this one, Clive.