Best ESP32 project with Alexa Google Home Automation using ESP RainMaker - IoT Projects 2022
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2022
- In this IoT project, I have explained how to make an ESP32 project with Alexa, and Google Home Automation using ESP RainMaker to control relays with voice commands, IR, and manual switches and store the last state in ESP32 flash memory (EEPROM). I have used all the free tools for this IoT-based smart home system.
To try out the FREE trial version of Altium, click here - www.altium.com/yt/techstudycell
During the ESP Rainmaker tutorial video, I covered the following topics:
00:27 Quick demo for the ESP32 IoT Project using ESP RainMaker.
02:41 How to use Preferences library to save data in ESP32 NVS memory
04:17 Example sketch to save the last GPIO state in ESP32.
06:31 Required components for ESP32 project.
06:38 Circuit diagram of ESP32 home automation project.
07:12 Source codes for the ESP32 IoT Project.
10:20 Add device in ESP RainMaker app.
Required Components for the ESP32 internet of things project.
1. ESP32 Devkit V1.
2. 8-channel 5V SPDT Relay Module.
3. TSOP1838 IR receiver (with metallic casing)
4. Switches or Push Buttons.
Amazon India Affiliate links:
ESP32: amzn.to/331pohb
8-channel 5V Relay Module: amzn.to/3mTWyVZ
Echo Dot Alexa(4th Gen): amzn.to/3srCiPA
Amazon United States Affiliate links:
ESP32: amzn.to/3mBjCch
8-channel 5V Relay Module: amzn.to/3p50UeH
Help my projects on Patreon: / techstudycell
Feel free to donate any amount: paypal.me/sdaspay
Download the Code for the ESP32 project using ESP Rainmaker from the following article:
iotcircuithub.com/esp32-proje...
Download PCB Gerber File of ESP32 control 8 relays:
drive.google.com/uc?export=do...
Important Links:
Preferences library tutorial: iotcircuithub.com/esp32-prefe...
QR code to add devices in ESP RainMaker: iotcircuithub.com/wp-content/...
Previous Video on ESP Rainmaker: • Home Automation using ...
Steps to program ESP32 with Arduino IDE: • Programming NodeMCU ES...
Get the HEX codes from IR remote: • Smart Home with Amazon...
GitHub Page: github.com/espressif/arduino-...
Important points:
1. You don't need any Amazon echo device for this IoT Project.
2. You need to install ESP Rainmaker, Google Home, and Amazon Alexa IoT applications on mobile.
3. You don't need to install Preferences.h separately.
4. You can control relays from any WiFi network.
5. Update the Preference URLs to install the ESP32 board version 2.0.3.
6. To reset the WiFi details, press and hold the ESP32 BOOT button for 4 seconds then scan the QR code.
7. IR receiver sensor must have a metallic casing. Otherwise, you may face issues while trying to get the Hex code.
8. Please watch the complete video, otherwise you may face some issues.
**Please take proper safety precautions while working with high voltages.
During this ESP32 IoT tutorial video, I explained all the steps to use the Preferences library to save data permanently in ESP32 NVS flash memory.
In this ESP32 project, you can control the relays without internet from the IR remote & switches. ESP32 will automatically connect with the IoT cloud when the internet comes back.
If the ESP32 is connected with Wi-Fi, then you can control the relays from anywhere in the world with Alexa and Google Assistant. And you can also monitor the real-time feedback on Amazon Alexa, and Google Home app. So with this IoT project, you can convert any appliance to IoT devices and control them through the internet.
So, now you can just ask Google Assistant, "Hey Google, turn off lights", or "Alexa, turn on light". that's it.
#esp32project #iotprojects #esp32
-----------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more projects: iotcircuithub.com/
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudycell/
-----------
-----------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
-----------
Other useful IoT projects:
Latest ESP32 projects playlist:
• ESP32 Projects
Latest NodeMCU projects playlist:
• NodeMCU Projects
Arduino Home Automation Projects playlist:
• Arduino Projects - วิทยาศาสตร์และเทคโนโลยี
Please Help my projects on Patreon: www.patreon.com/join/techstudycell
Feel free to donate any amount: paypal.me/sdaspay
Great
Could you make a video teaching how to make a thermostat with rainmaker on esp32 and DHT22.
I'm counting on your help.
thank you in advance
This is really awesome, useful and a new learning for me.
I have implemented this logic for my tomorrow’s video right now is last moment but it was worth it!!!
Thanks once again ✌🏻
Love from Pakistan. I watch both channels and my house has esp32 controlled in most areas. Big Thanks to iotcircuit, I have ordered PCB from jlcb using their Gerber files
Yo I was going to share this project to u glad u saw it befor and don't forget to gv this bro credits he is just awesome ,btw u lose this time 🤣he added eeprom function before u any ways it goes like keep sharing keep learning
You are welcome...🙏
@@drelectronics13 I have given the credits in the description of the video and also shared his video link 🙌🏻
@@techiesms isi Khushi mei aap bhi Gerber file public karde.
Much waited project, thanks bro. Keep up the good work.
Thanks 👍
Thanks to picking up my comment 00:10. I realised today you're reading all comments which we do. Thanks to making such videos this would be next level project.
i usually watched techiesms channel they had good content but many Indian can't understand too quickly his language. You makes complicated project in simple way and teach the codes in simple terms so anybody can make its own projects with help of you.
Lots of thanks
Thanks for your support 🙂
Thank you so much 😊
Actually implemented this project following this video guide. It was fun and interesting.
great...
Thank u so much😃 broo can i use water pump it is overload device in same project
Its work broo perfectly
Well done
Can we use this preferences library with nano iot 33 as well? Or how do you store permanent data in nano iot 33?
wow what a brilliant and inspiring idea. if you add a motor to the curtain it will definitely be more interesting.
Thanx man u did it now we can make the perfect home automation
yes, true
Always top!
Thanks
this project is so great!... can you make this project with ethernet port (w5500 lan module) i want to connect this to my internet thru cable... thanks...
Sir another request... Can you add OTA code upload features using AsyncElegantOTA library
Well explained👍👍Thank you for sharing ....😃😃
Welcome
Superb working sir cod
Sir ,how many board working this code
Hi bro.....Bro why not interface the Bluetooth control it is applicable or not pls tell bro....
Thanks a lot sirr...added feedback lcd sir 🙏🙏🙏
Ok
Ok sir I waiting next project add feedback lcd 🤗
Sir in this video we will use ESP32 am I replace in ESP8266
Excellent presentation, If possible, put an LDR and make a program, Then you can see the feedback in the lights(If the light does not work properly). Add a new video on how to turn ON/OFF all lights with the help of a timer. We got a lot of knowledge from watching your videos. Thanks.
Noted
Bro please make a video for fire detection and alarm system using blynk 2.0 app bro... That will be much useful
super bro.
can you make fan dimmer control using rainmaker
Thanks. Working on it
Welldone 💯💯
Thanks
I have esp8266 can it work
Hey sir, It would be great if you can add fan speed dimmer and also a way to upload new codes to the board through OTA... As I've installed my project in the wall and to upload new code I have to always remove the esp32 from it
Please add fan dimmer+6appliances,ir, temparature senser,push button,esp rainmaker
Great video
Thanks
One of best Project. Awesome Idea.
Sir buc can same Program work or not in Node MCU ESP 8266.
If not then make vdo on that with EEPROM or Preference Lib using Node MCU ESP8366. Thanks and Regards.
Rainmaker doesent support node mcu and node mcu is now for slow and small project
Working on it
Dream project for me, amazing and great work.
Welcome
Sir can you please make a video on fan control in same project
Will publish soon
Awesome
Thanks
your skill absoluto fine and amazing with new trend ,your coding skill very high but project somehow not practical due to some minor bugs or improvement needed
when esp reboot any reason it will connect wifi
but any reason wifi hotspot restart not connect to wifi .why?
it is not practical to each time reboot esp module ,
this problem not only me but many user in your subscriber ,
kindly look this matter
with out support making new project not possible ,
kindly do some little help to me
kindly update and upload same code with auto reconnect feature .
i hope you understand my concern
Please make solar panel power monitor esp32
Sir, it's not working perfectly. Sometimes after power cutoff and restore it takes values from physical switch position.
Blynk was best as it used to take data from blynk cloud
Nice 👍
Thanks
Please RGB control with esp rainmaker
SUPERB SIR
Thanks
Also add IR blaster
Thank you very much sir👍can you help me how to create push button like door bell on android rainmaker? ..thanks
Okay
How to create push botton sir?☺
Hy sir my ir remote is not working??? How to solve this problem???
my esp32 not connecting to wiffi automatically after went offline please guide me to resolve this issue
Sir g mujay full system chaheyay Jo apnay banaya hay plz
Thanks a lot sir. 🥰
Welcome
Well done
Compile windows7 not work how to fixed?
Windows 10 work
As per your instructions first upload Gpl stale code and check boot bullom then upload HEX Code then after 8relay model code Apps satup my big problem is not including HEX Code your other video which doesn't have remote it is ok after code upload but device off relay run onn and device off relay tun onn ... it works .... and problem manage library doesn't include ESP32 band 2.0.3 mine is andino 2.1 vanson plz help
As now we have best home automation pls make next video on ota update with rainmaker it is possible and shown on their web
Wifi details is not hard-coded. You can update the wifi details anytime from ESP RAINMAKER app. Please watch the complete video
@@TechStudyCell I watched whole video already I mean to say what if we want to update code ,ota?
It's not reconnect automatically to wifi when router restart , have to press button or restart the esp32 module to reconnect to wifi
Except this error the Project is Amazing as I'm using this from last 8 months in my home.
Please provide solution for auto reconnect.
Again a great video :-)
Short question: Can you also make a video where only 4 relays are controlled with the appropriate PCB ?
Why no use rain this time 🙂👍he did best on youtube
Please make a project with the help of motion sensor and clap switch
Okay
When the wifi signal is lost and come back wifi signal the ESP 32 not connect automatically in the wifi .
And I turn off and on ESP 32 then the network connect.
Not automatically connected why sir
Hi Bro,
Any Special coding needed for WIFI reconnect? with your 8 Channel relay, wifi is not reconnecting automatically after disconnection.
It may take some time, but it should reconnect automatically.
@@TechStudyCell ok thanks bro
Sir I am using yours code
Excellent work sir thanku so much
But I want small issue
I am two esp32 using same coade sir so
one board automatically WiFi signals faild wat is the problem sir 🙏
Actually same issue with my project i think no answer from project maker
Sir add fan speed control your program esp ranimeker
Working on it
Sir when I set up and enter wifi name then device autamatically disconnected as we have a need for connecting our phone and nodemcu with same wifi please tell me I follow all your projects and all are working but these didn't
May be your node mcu will be damaged plz ensure that try to a new node mcu for Testing
It can't reconect to wifi autmatically after i restart the wifi,any solution??
Bro esp rainmaker app says no device found while provisioning ,tried all method .
also i forgot all devices in my bluetooth still problem exist ,the esp32 boards are brand new ,what could be the cause as not only i nlbut many are facing the issue ,plss help👍
First delete the previous Projects from ESP RAINMAKER app, then unpair the ESP32 ble from mobile Bluetooth settings. Factory Reset the board and try again. If issue not resolved, create a new esp rainmaker account and try again.
@@TechStudyCell thnx for the reply i did this already ,it never seems to work ,though it work with the board i had lying for years, but now i brought 2 new boards from techiesms and they dont work here is the link of drive showing the issue plss check drive.google.com/file/d/1BlRB4Pq2uStkQjR83TJ-sR9bp83Ij19G/view?usp=drivesdk
i have same problem
@@HuyBui-fs6yo I brought new boards and it's working, probably some boards which looks cheap are not working with it ,u should see the details written on the chip cover more info means original board and less info means it's fake one
rainmaker connection problem disconnected device
Pin 35 is not responding ir
Report node config failed. PLZ HELP
can we do it with blynk iot platform
Yes. You can use the Preferences for any ESP32 projects
brother my esp32 not pairing in esp rainmaker app it saying No bluetooth device found
and manually when you turn on switch after a minute it automatically turning off
Mobile se coding kaise Kara
brother my esp32 not pairing in esp rainmaker app it saying No bluetooth device found, and manually when you turn on switch after a minute it automatically turning off please help brother 🙏
First, remove the previous device from esp rainmaker app. Unpair the Bluetooth, turn on gps and Bluetooth. Now press the boot button for 4 seconds and tryto scan the QR code.
@@TechStudyCell i tried that also but not working
i have same problem
@@HuyBui-fs6yo is there any solution
@@flbeats3538 someone tell me that should brought new boards and it's working, your board could be broken or fake one
Sir isme mit app inventor kese add kare
Is program me Mit app inventor kese chelaye
🙏
th-cam.com/video/WAn0fJ9QCOA/w-d-xo.html
?
?
If wifi also goes down with the power supply, the esp does not reconnect with the wifi after power is restored. Please solve this problem.
Yes same problem here... I have to manually restart esp32 whenever my router power supply is down...
excellent but support required
sir am triying somany times but not uploading code, showing esp32 nodemcu error please tell me sir pleese
Update your board library to 2.
ir recover code doesn't work
Sir please Mobile se program kejia
Fr
💞💞💞💞💞💝💝💝💝💕💕💕
hello sir I'm getting this error please help
esp-tls-mbedtls: mbedtls_ssl_handshake returned -0x4310
E (74288) esp-tls: Failed to open new connection
E (74288) TRANSPORT_BASE: Failed to open a new connection
E (74294) MQTT_CLIENT: Error transport connect
E (74296) esp_mqtt_glue: MQTT_EVENT_ERROR
सर कोड कंपाइल करते हैं तो एरर आता है मोबाइल फोन अपलोड
प्रॉब्लम सॉल्व कीजिए
sketch_jan31f.ino:16:20: fatal error: RMaker.h: No such file or directory
Great
Could you make a video teaching how to make a thermostat with rainmaker on esp32 and DHT22.
I'm counting on your help.
thank you in advance
Okay