ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- We completed the last items on our new Land Rover Discovery 4 after fixing a snapped crankshaft and getting the vehicle back on the road. In this episode, we change the oil after 1500 km, install accessories like a DAB+ radio, cell phone mount and more. We hope you enjoy the video and thanks for watching.
We are not liable for any harm you do to your car, your engine, your surroundings or yourself. Use the information given in this video at your own risk.
Thanks for watching,
Vera & Christian
Become a patreon
/ lrtime
"Christian is not funny yet, I have to wait until later." That is hysterical!
His funny fuse was not working at that time 😂
You just gained a lot more respect from me for not allowing any sponsored advertising especially the part when you say *do not contact us* I always love to see and hear a non biased opinion! 👏👏👏👍👍👍
Hi guys,
Those two plastic fixings hold the air ducting for the radiator to the front crossbrace on the body, just by the crashbar. Look where the air goes in and look straight up!
Hope this helps
Morning Christian and Vera. This has been a great series of videos with lots of humour and informative content. Keep up the great work.
Great video. Even better workmanship on the repair. It's very disappointing how poorly skilled the LR service centre was not recognising a major fuse.
The two leftover pieces hold LR engineering departments pride from hitting rock bottom
Perfect way to celebrate Coronation weekend, with my favourite Land Rover show!
Hi 👋🏻 Vera and Christian. That was the most satisfying ending to what was truly fantastic LR rebuild 👍🏻 What makes it even better is the humour and top quality banter between you both 😆 Cheers Stevie and as always big kiss for Vera 😘🏴
😊🙏🙋♀️Vera
Fantastic result. I can’t believe it is already finished and road tested. Kudos to you both!
Oh it has been running great for a while now. Just the vidoes are coming in a little bit delayed as we need time for editing. 👍🙋♀️Vera
Nice, very nice 🙂 Great to see one saved and used, rather than scrapped.
Fantastic rebuild guys. A lot of hard work. Very satisfying for you both 👌
I can't believe that JB weld, to repair the cracked engine crankshaft is holding. Enjoying your humour. Cheers from Australia 🇦🇺 🦘
Excellent work! You and Vera are the most popular Do-it-yourself Land Rover owners! I think that LRJ should use your videos to help LR owners AND PAY you for the excellent service and common sense approach to the common-lack-of-sense LR design. You are the BEST! You make the impossible repair look like a walk in the park.
The lineup with the 3 discoveries instantly puts a smile on my face 😋 25:32
Well done. It is an achievement to strip a car as far as you did and put it back together without any major hic ups. I look forwards to the disassembley and rebuild of Veras car!
16:18 I've fitted extended roof rails now, so that trim piece came off. Boy those plastic pins are a pain.
Tip: Bend the sides of the pin head up to form a handle, then unscrew the pin. That way they don't break, or leave any plastic in the threads to make the stainless steel rail bolts snap.
20:31 It still does. And it's even more beautiful now with Tango 🟠🟧🔶️ accents.😊
What you have done
It's so much fun watching you at work in these great videos. Surely it's a ton of work making them. Thank you!
You guys are fantastic. I'm not even interested in land rovers but I still love your videos :).
That fuse is obviously something that never normally blows! Excellent series of videos and very technical.
I do not own a Land Rover , but I do own a Volvo XC90 D5 , 2019.
I am not a mechanic but you got me curious on a newer Discovery.
Really like your personalities and the way you both make these v-logs.
I press the subbutton 😉
Grüße aus Malmö , Schweden.
The little gadget install is brilliant and very well done. Smiley, happy people having fun......Bravo.
Greetings all the way from SOUTH AFRICA. Those two plastic clips left over fit in the plastic shroud just above the impact bar and they hold the plastic shroud onto the radiator support from the bottom Thats a front bumper off job. Great video as always
and i always have a 400 amp in my tool box
Us too now😅👍🙋♀️
I'm surprised that the D4 doesn't come with DAB+ ... but I think you can change the DAB module for a DAB+ from an Evoque (that is a regular swap on Jaguar). Great morning video and great work as usual .. with the OMG rate returning to normal level 😁
Yes, I too was somewhat surprised at that. Thankfully, my 2015 HSE Lux does. I will be looking to retrofit DAB to my Disco 3 though.
You’ll be travelling in style now Vera the both of you have done a fantastic job on this car
Great finish to this particular rebuild series. Great to see the car running perfectly 💪 Looks good with the RTT ….. for a D4😉
Great end to the rebuild project, I wish you both the best of luck with the car for the future, and I hope we get some content of its future trips 👍🏻
Loved the rebuild, some excellent information and a joy to watch each stage
I invite you to visit the Kingdom of Saudi Arabia, it is beautiful and it will be an enjoyable trip and an excellent experience
Excellent video as usual guys, nothing wrong with having 3 Discovery’s 👍🏻
You two work so well together, love the humor.
Great job rebuilding that engine, beautiful car too, really, and I'm glad you own it!! (Never did a job like that...used to, when I had Land Rovers. But yes, I now do own a couple of Land Cruisers for the last 24 years. Always have a can of something to drink in one of my hands 😊 ) Hope you have a great trip.
Excellent, the discovery is looking great. The RTT looks very good sat low like that too. I bet the previous owner would love to have it back but I think you'd be crazy to let this one go. Maybe refurbish Vera's D3 and then hold a raffle and sell it off 😮😊 either way that is a great line up of very well maintained LRs👍😎see you next week 🤣
Dear a Christian and Vera, just love the banter guys. Surely you have realised Land Rover well enough by now but the grand plan is to create super enthusiasts like you who keep all of us armchair LR enthusiast’s totally entertained. Please don’t stop!!
Brilliant series of videos. Keep up the great work.
Beautiful job, looking forward to seeing the D3 renovation. Thankyou for such entertaining and informative videos.
Did anyone else notice we don't have ads in the entire 25 minutes video....SOLID content....but put up a donation button or something...you deserve it....
We have a link to our Paypal account for donations in the About page, and we do get donations with the Superthanks option sometimes. These are always welcomed🤗🙏🙋♀️
Going strong 😊 also checking the filter it's easier to cut the ends off with blade, pull it flat to check for debris
We know that, but like to do it our way. I tend to keep each filter until the next service. 🙋♀️
I think Christian, and Vera, should be given top jobs at LR. Christian as a top design engineer, and Vera head of quality control.
If you mix the used engine oil with some diesel you can use it to paint any wooden outdoor structure including fence panels.
Not if you own three Land Rovers👍😅Our fence is almost falling apart because we don‘t spent any proper time maintaining our house and property.🙋♀️
Never a dull video you are a legend a brilliant mechanic
Sunday mornings are made for LR Time.
The only Land Rover I would "trust" is one Christian and Vera rebuilt ! 🙂 Hello from your old USA home!
👌👍Can‘t wait to be back in August🙋♀️
It sounds like you folk have some exciting adventures planned for a Disco (3 or 4 ?), to come. For now, reap the rewards of your good work on that D4. Well done again.
Love you channel on TH-cam. Great information, witty and great sense of humor. Can't wait to hear the plans for your fleet of Land Rovers.
Hi Guys, I'm so pleased for you that the engine sounds so good, with NO oil leaks. You do really high quality so I'm thinking of buying a Disco 4 and taking a little drive to Germany ...
Wow. Another great video. I have been with you all the way. I adore your wonderful teamwork and great sense of humour. You two are amazing.. Can't wait to see Vera's Discovery 3 on the lift. See you next week. 👏🙏
😀🙏🙋♀️Vera
Great series on the LR4 and the install of the LR3 gear on it. I am looking forward to the LR3 engine work - I have an LR3 TDV6 and am keen to see the differences with removing the body (if any) and the engine internals if you go that far.
We did the body off on the LR3 now and it was much less work in the engine compartment. Our video will not be as detailed. Christian
It was off in about 4 hours. You have much less parts to take off. On a Disco 4, you have to take off the entire coolant hose system. Which you hardly even touch on the Disco 3. The whole purpose for the body-off is of course the engine rebuild. So we are all eager to see how that one looks. 👍🙋♀️Vera
@@Vera_and_Christian There is a whole fan base of LR3 people who are very keen indeed. Thank you for the response Christian, I appreciate it, and the effort you and Vera do to make and publish these videos. On top of this is the extra things you do for your patreons. It must all be exhausting at times!!
Fantastic professional as usual, loving your videos
Looking forward to you working on the D3. You two are going to be the foremost authority in Germany when it comes to taking the D3 / D4 to pieces (not to mention that V6 Ford / PSA engine)! It will be very interesting to see the condition of your D3 engine after 260 - 270,000 klicks.
Yeah, we absolutely can't wait to open it up. And we actually expect it to look like new. 👍🙋♀️Vera
I just love you two, what a double act, I myself I’m not a petrol-head and only watch because of you both (EV owner + my wife has a, wait for it a Toyota Rav 4 hybrid) Just please, please keep your very funny videos coming and not forgetting Christian your wonderful engineering skills, I thank you 👍
The 300A fuse is there in case of an accident where the crumple zone squashes the fender/frame and shorts the + terminal. Similarly to Electric vehicles. An easy and cheap device for modern cars that need to crumple a lot to save the passengers.
Great video once again .....Sundays are always exiting now I have found LR time .very envious of your garage machine shop set up
This had to have been a very satisfying project! I suggest that you keep all three so you have a spare.
Amazon should give you two a TV show....the equivalent of Top Gear for Land Rover owners.
Dear Christian and Vera, espetacular project! Congratulations you all did it completely. The Discovery 4 Blue color is amazing.
I am already anxiously waiting to hear from your project trip to Jordan, Israel and others places!
Big hugs and positive energy from Brazil 🇧🇷
Ado
ITS LR TIME😊😊😊😊 your videos are very inspiring.i look forward to your videos every sunday morning.keep on doing them guys 😊😊😊😊😊😊 i see you have a varta battery!!! Good call👍👍
Thank you Vera and Christian for another entertaining and informative video. I was going to upgrade my Discovery 2, TD5 however, I have decided not to given the on-going issues you have with your later model Discoveries. You are so fortunate to be able to undertake the work yourselves and we are so fortunate that you document the repairs!
Keep up the videos. Thanks from New Zealand.
That is a wise decission. The Disco 2 also looks so cool. 😀👍🙋♀️Vera
After all this work you both did with that Disco4, i would keep it as well.
Great series, hope the car will serve You many many miles!
Fantastic great to see the Land Rover finished what a car 👍👏
Thank you both! Another excellent video
Another good one guys, keep up the good work!!
Hi guys, great series thanks. When I drain the oil I use the top of a 5l can cut down. It makes a great barrier to the oil soaked chassis!
Great job Vera and Christian , another one saved from the LR (s)tealer ... you make a good couple ,working on the car with humor and knowledge ,very pleasant to watch ...greetings from Belgium Ooh my Gooood ...
Christian and Vera, thanks so much for the laughs and for bringing us along on this epic journey. I am now and forever calling that oil 5W-dumbass, and have truly enjoyed your awesome videos. A massive thanks from Australia.
Cant deny that these look fantastic both inside and out even if they do get a bad reputation, it's the ideal vehicle for long journeys and using it to sleep in over night not many vehicles can do this as good as the Land Rover for overlanding
Great series nice rebuild. Here in SA parts are expensive. For this brand. Wonder how much South Africans are watching.
OH I have lots of South African friends here. Even the previous owner is originally from South Africa.👍🙋♀️Vera
@@Vera_and_Christian Thank you for the reply Vera. Really can't wait for more rebuilds.
Best cellphone holder is RAM Mount. I use it for years. It is great quality but not cheap.
I've been to Jordan. Very cool trip. Petra, dead sea, friendly people..
Brilliant. The best looked after Landrovers on the planet by far..
Oh you are so great. I’m really looking forward when you rebuild your Discovery 3. I am sure I will learn a lot for my own one.
Perfect job and beautiful car Vera und Christian . Best regards from Amman Jordan
Christian / Vera this series has been great, a really engaging watch. If ever I move next door to you in Germany I will by a Land Rover and you can look after it😂
Vera, Congratulations on the new to you LR4!!! beautiful colorful!!!
Excellent as always.
What an achievement! Thank you.
What a coincidence.... I have the same car, same colour and LR just fitted a new engine under warranty after only 36k miles for the same fault!! (lucky or what?)
I will be following the progress of Vera's mall crawler to see how she gets on with her new car after her D3 after your amazing engine rebuild 🙂🙂
But I drive it only temporarily. Until my D3 is back up and running.👍🙋♀️Vera
@@Vera_and_Christian I think if Christian loves you enough he would let you keep the new mall crawler 🤗😘
@@Bimmly No I really only want to drive it temporarily. I really can't wait until my Disco 3 is back on the road again. Christian has to decide which Discovery 4 we'll keep because he wants a Disco 4 as a daily driver. 😀👍🙋♀
@@SvennTveskagg Absolutely correct. And an actual key to turn. You are not as able to intervene on a Disco 4 as you can on a Disco 3. I like to be involved in the driving, it's part of the enjoyment I get when getting into my car. 👍🙋♀Vera
Hell, good job you have a spare mate. IF my, much older one, drops motor might go TDV8 conversion.
Better late than never to watch your great vid but I have today Birthday and was celebrating until now..... and still take the time to be here! 😘
😀👍Happy Birthday Dave 🙋♀️Vera
I love LR time. It makes a Sunday. Thanks again.
Christian and Vera, very good rebuild and over howl engine, thanks for sharing
Another great video, you must be delighted with the engine rebuild, congratulations, can't wait for further updates
Proclip Usa makes a great phone mount for a perfect location in my opinion
Great looking yard.... with 3 x DISCO ❤
I think your plans should include a TD5 Disco 2. Plenty videos to be made on leaks 👍👍
Including the lint in your belly button, you guys crack me up😂😂😂. Tomorrow morning I’m personally writing to discovery channel and gonna complain that they haven’t offered you a series. Loving the content ☘️🇮🇪
😀👍🙋♀️Vera
So funny imagining Netflix, Amazon etc trying to create something as enjoyable to watch multiple episodes of as this!
Hi, I bought a dewalt site/builders DAB radio (other makes available) I can have it any vehicle without a radio... Quick and easy throw it on the back seat!
I look forward to the D3 refurbishment. My D3 will need this in a couple of years so will look at this as a template.
Your attention to detail is excellent 😊
Glad you installed silver rims on it. Much better. Also, the red tray you use looks EXACTLY like an In-N-Out Burger tray. You can see for yourself during your L.A. visit. There is actually an In-N-Out right at the beginning of the LAX runway in case you want some when you land!
We are flying to Las Vegas not LA, so we are right in the middle of Utah and California. We have done that many times before and it worked out always best. 👍😀🙋♀️Vera
@@Vera_and_Christian That's OK, there is an In-N-Out on the corner of Tropicana and the I-15, about 2 blocks west of the Las Vegas Strip. You cannot miss it.
Really looking forward to the D3 overhaul!
Ahhh yessss in this video I feel me more confident compared to yesterday’s video I watched about the rebuilt…why ? Because you change a fuse and vaccum the disco, you’re so human finally 😅
Guys!!! You are awesome!! 😁😎 and your videos too!! 👍
You guys are legends well done,,please come to the UK and service my discovery 4
Fantastic you are recycling your Oil for Toyota owners 👌🏻😎
😎😎 All the lint comes out …including the one in your Belly button !
Tech solutions and good one liners … brilliant content ….!
It’s called a Megafuse. Good luck on the trip.
Hi Christian, I just wanted to comment about your comment 5W40 C2/3. You should probably consider a ACEA C4 mixture as it has the same low SAPS levels as a ACEA C1 && the HTHS viscosity of your much beloved 5W40 oils. So, no risk on DPF side && better protection in high temperature situations. To my understanding that is precisely what you want to acheive with 5W40, but in this case without having to cut back on the low SAPS. Your thoughts about my proposition? Regards JAC
Christian , it’s Chris from the uk , great to see you enjoying the pain of owning a Land Rover , I’m an ex rover mechanic….I know . Keep up the videos , I’m sure there will be lots more .
Good morning from Bali.
You don't need three?
I really wish you were near so I could do a visit and maybe purchase one of your perfectly-treated Disco! 😂
Amazing work, you both! Two thumbs up! ❤❤
Rgrds, a/d
She's a thing of beauty! well done you two! if i drop mine off at your place can you work your magic on her :)
Superb episodes from the rebuild, some great tips with fitting the dab! The fire safety sticks are a great alternative to conventional fire extinguisher. Just seen Germany's contribution to euro vision! You guys are crazy! According to steve!😮